Attachment_1-OTC__Access__and_Map_Industry_Day_20_Nov_19_.pdf

A c c e s s t o O T C

T a b l e o f C o n t e n t s Visit request procedures

Post access

Rental vehicles

Safety

Aerial view of OTC

Killeen-Fort Hood Regional Airport

Fort Hood websites

Newcomers

Post guide (maps)

Traveling to Fort Hood

U.S. Army Operational Test Command 91012 Station Avenue, ATTN: TEOT-CG

Fort Hood, Texas 76544-5068

Phone: 254.288.9110 DSN 738

FAX: 254.288.9339 DSN 738

E-mail: CMD

D r i v i n g f r o m . . .

Killeen airport

Copperas Cove

Belton

Austin

Dallas

Visit request procedures Before coming to OTC, have your security office send a visit request to OTC either by JPAS (SMO is W469AA) or fax to 254.288.9927 DSN 738. We will add you to our access roster and send it to all our local directorate security and ops officers. Anyone with a badge from the major Fort Hood commands, ATEC, and AEC will be allowed access to OTC. If coming from outside OTC and you do not have any of the badges named above, then you must exchange a picture ID and sign for a visitor’s badge from the OTC security office in Building 91012 on Station Avenue (see map).

Post access Fort Hood does not require vehicle registration for DoD ID card holders. Soldiers, dependent family members, retirees, DA civilians, Gold Star Families, and contractors with DoD ID cards may enter the installation by displaying their DoD-issued ID card to guard personnel at access control points. A driver’s license or other non-DoD ID card cannot be used as proof of DoD affiliation. If you do not have a government ID card in your possession, you must go to the Marvin Leath Visitor Center to get an installation access pass/badge.

The Marvin Leath Visitor Center’s hours of operation are 24 hours a day every day.

Civilians without a pass need to go to the Fort Hood Main Gate, show their driver's license, current insurance card, proof of registration, and provide the purpose of their visit to Fort Hood. Information concerning access to the post and the Marvin Leath Visitor Center can be found .

Rental vehicles Military (active duty, reserve, and retirees) and DoD/DA civilians with CACs driving a rental vehicle can enter any access control point without a pass. Their names must be on the rental agreement. Drivers will present their rental agreement (must be in the driver's name) and DoD ID or CAC to the gate guard. All passengers must show their IDs/CACs. Family members driving a rental vehicle must have a pass. Civilian visitors without a government ID card must go to the Marvin Leath Visitor Center at the Fort Hood Main Gate and show their driver’s license, current insurance or vehicle rental agreement, and provide the purpose of their visit to Fort Hood in order to get a temporary pass. Information concerning access to the post and the Marvin Leath Visitor Center can be found .

Safety Seatbelts are required at all times while driving on post. Infant car seats are required. Minimum amount of liability insurance is required. Parking of motor vehicles is authorized only in those areas/spaces designated for parking. Speed limit on Fort Hood is 30 mph unless otherwise posted. Only hands-free cell phone devices are allowed on Fort Hood.

From Killeen-Fort Hood Regional Airport

TO OTC:

1. Exit airport and turn left on Clear Creek Road.

2. Turn left on Mohawk Drive and proceed through access control point onto West Fort Hood.

3. You will come to traffic intersection at Clarke Road. Proceed forward through light. Road will turn into Headquarters Avenue (chapel is on right).

4. Proceed until you dead-end at Station Avenue. Enter parking lot of OTC HQ. Enter Bldg 91012 to visit the security office.

TO MARVIN LEATH VISITOR CENTER FOR TEMPORARY PASS:

1. Exit airport and turn left on Clear Creek Road.

2. Proceed until you hit major intersection where you will turn right to get onto U.S.

Hwy 190 (east).

3. Take exit to enter Fort Hood Main Gate.

4. Turn into parking lot of Martin Leath Visitor Center on right.

From Copperas Cove

TO OTC:

1. Head east on U.S. Hwy 190.

2. Take exit at Clarke Road. Turn right onto Clarke Road.

Proceed through access control point. Continue driving on Clarke Road.

Turn right on ( is on right).

Enter parking lot of OTC . Ent Bldg 9101

TO MARVIN LEATH VISITOR CENTER FOR TEMPORARY PASS:

1. Head east on U.S. Hwy 190. You will pass Clarke Road and Clear Creek exits.

2. Take exit to enter Fort Hood Main Gate.

3. Turn into parking lot of Martin Leath Visitor Center on right.

From Belton

TO OTC:

Head west on U.S. Hwy 190. You will go through Nolanville, Harker Heights, and Killeen. Take exit at Clarke Road. Turn left onto Clarke Road. Proceed through access control point. Continue driving on Clarke Road. Turn right on ( on right).

TO MARVIN LEATH VISITOR CENTER FOR TEMPORARY PASS:

1. Head west on U.S. Hwy 190. You will go through Nolanville and Harker Heights.

2. Just west of Killeen, take exit to enter Fort Hood Main Gate.

3. Turn into parking lot of Martin Leath Visitor Center on right.

From Austin

TO OTC:

1. Head north on I-35. You will go through Round Rock and Georgetown.

2. Take exit for TX-195. Turn left onto TX-195.

Proceed on TX-195 until you dead-end at Killeen. This will turn into S. Fort Hood Street. Proceed down S. Fort Hood Street until you hit major intersection where you will turn left to get onto U.S. Hwy 190 (west).

Take exit at Clarke Road. Turn left onto Clarke Road. Proceed through access control point. Continue driving on Clarke Road.

TO MARVIN LEATH VISITOR CENTER FOR TEMPORARY PASS:

1. Head north on I-35. You will go through Round Rock and Georgetown.

2. Take exit for TX-195. Turn left onto TX-195.

3. Proceed on TX-195 until you dead-end at Killeen. This will turn into S. Fort Hood Street.

4. Proceed down S. Fort Hood Street until you hit major intersection where you will turn left to get onto U.S. Hwy 190 (west).

5. Take exit to enter Fort Hood Main Gate.

6. Turn into parking lot of Martin Leath Visitor Center on right.

From Dallas

TO OTC:

Head south on I-35E heading towards Hillsboro. Stay on I-35, going through Waco and Temple.

Take exit for U.S. Hwy 190.

Take exit at Clarke Road. Turn left onto Clarke Road.

Proceed through access control point. Continue driving on Clarke Road.

TO MARVIN LEATH VISITOR CENTER FOR TEMPORARY PASS:

1. Head south on I-35E heading towards Hillsboro. Stay on I-35, going through Waco and Temple.

2. Take exit for U.S. Hwy 190. You will go through Nolanville and Harker Heights.

3. Just west of Killeen, take exit to enter Fort Hood Main Gate.

4. Take exit to enter Fort Hood Main Gate.

5. Turn into parking lot of Martin Leath Visitor Center on right.