Parts Washers Requirements Revised 8.6.25.docx
DOCX document 23 KB Posted
- Attached to
- NDARNG- Parts Washers (2 Total) __Amendment 1
- Solicitation number
- W901UZ25Q1299
- Issued by
-
Department of the Army National Guard
About this file
This is a technical requirements document for a federal solicitation requesting two parts washers for the Department of the Army National Guard (Solicitation Number W901UZ25Q1299). The contract seeks front-loading parts washers with locking latches that must be UL Listed with attached stickers, requiring specific dimensions of 35"W x 35"D x 41"H inside and 53"W x 43"D x 69"H overall, with 60-gallon tank capacity and 2 HP pump motor producing 40 GPM at 45 PSI.
The washers must feature 12-gauge steel construction with welded seams, 230V/60Hz single-phase power at 38 Amp, 0-60 minute timer, and 5 RPM turntable with 18" extension and 500 lb capacity. Additional specifications include integral oil skimmer, double intake filtration system with steel screen filter and sludge trap, 30-inch diameter turntable, 9,000-watt heater, and 20 high-pressure nozzles. Each unit must weigh 815 lbs, be manufactured in the USA, include 25 lbs of biodegradable soap concentrate, and be serviceable at the installation locations. Amendment 1 allows equivalent or greater size and capacity equipment while maintaining the same voltage requirements. Quotes must be from SAM-registered companies and include freight and handling costs for delivery to two different locations, with one washer per location.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Combined Synopsis and Solicitation-Parts Washers.docx | DOCX document | |
| RFQ- Parts Washers.docx | DOCX document | |
| Parts Washers Requirements.docx | DOCX document |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Parts Washers Requirements Need two (2) parts washers to clean parts removed from equipment to properly inspect parts to make determination of usage. Mandatory that these items are (UL Listed with sticker attached).
1. Model: Front Load, Locking latch must be UL Listed with sticker attached
2. Inside Dimensions: 35W x 35D x 41H
3. Overall Dimensions: 53W x 43D x 69H
4. Tank Capacity: 60 gallons
5. Pump Motor: 2 HP
6. Pump Output: 40 GPM @ 45 PSI (2700GPH)
7. Grade Steel: Rugged 12-gauge steel with solid welded seams
8. Power Requirements: 230V/60hz, 1-ph, 38 Amp
9. 0-60-minute timer
10. 5 RPM turntable driven by a #40 chain
11. Turn table extends 18” for easy loading and unloading.
12. Integral oil skimmer and pump reservoir filter to remove oil and grease.
13. Double intake filtration system steel screen filter with sludge trap.
14. 500 lb turntable capacity
15. Dual sealed bearing shafts on sprocket drive and turntable motor
16. Turntable Diameter, 30 inches
17. 9,000-watt heater
18. Country of Origin USA
19. Overall weight 815lbs
20. 20 high-pressure nozzles
21. 25 lb of biodegradable soap concentrate Amendment 1
22. Willing to accept quotes for equivalent or greater size and capacity. Voltage must remain the same
23. Must be able to be serviced at location
File details come from the government source that posted it. Updated .