Attachment_D_CPFF_STO.pdf

UNCLASSIFIED

SOURCE SELECTION SENSITIVE

Performance Work Statement

For Geospatial, Research, Integration, Development and Support (GRIDS III)

Sample Task Order (CPFF)

Integrated 3D Wide Area Mapping Sensor System

Part 1. General Information

1.1 Introduction. The goal of this sample cost plus fixed fee task order is to develop and deploy a new sensor with the ability to collect Nadir and off-Nadir images to allow for 3D image capability. The 3D capability is not for use in single target source images, but rather for large area capture to allow for a more robust 3D view of areas of interest.

Particular attention should be focused on off- Nadir LIDAR and EO collections to support High Resolution 3D imagery to support Mission Planning Rehearsal and situational awareness in conjunction with Non-Combatant Evacuation Operations (NEO). Overall Period of Performance for this task order will be twenty-four (24) months.

1.2 Background. With past NEO missions showing a lack of planning information and with past analyses showing a need for better situational awareness, the AGC is seeking to increase situational awareness by incorporating 3D high resolution imagery into the pre-deployment phase of NEO. This effort seeks to develop an innovative 3D sensor capability to provide never before seen data imagery of a dense urban environment. This sensor(s) would allow for the collection and rapid production of 3D models of city wide areas to include ingress and egress for military forces.

The warfighter’s requirement for high-resolution terrain data has grown exponentially as has the requirement for accurate, timely high-resolution 3D elevation and imagery data to support current and future operations. High-resolution 3D geospatial information provides the foundation data necessary to produce geospatial products that provide the force multiplier necessary for successful operations. The goal of this project is to explore using high-resolution imagery capable of creating 3D models for mission critical situational awareness and battlefield intelligence in support of NEO mission planning and rehearsal.

1.3 Objectives

AGC requires a Contractor with the capability to manage a highly technical development and system integration effort.

This effort seeks to develop and test an innovative 3D LIDAR and EO sensing technology to collect and produce data capable of 3D model generation for mission rehearsals in relation to NEOs. The newly developed sensor will be able to quickly cover a large region using aerial manned and/or unmanned platforms to deliver large quantities of high resolution data which can then be delivered as 3D models to support required situational awareness and mission planning of NEO missions. This effort will focus on enhancing the Government’s knowledge and understanding of LIDAR/EO combined imagery and its use in 3D high resolution model generation with the ability to collect high resolution data from an aerial platform. The Contractor must also be capable of providing a team of highly qualified personnel that will be able to meet the following GRIDS III requirements:

1.3.1 Conduct Geospatial and Geospatial Intelligence (GEOINT) Systems research, development, engineering, analysis and operations, including identifying and addressing gaps in geospatial science & technologies.

1.3.2 Integrate, execute and transition Command, Control, Communications, Computers, Intelligence, Surveillance and Reconnaissance (C4ISR) concepts, processes and architectures.

1.3.3 Conduct experiments, demonstrations, and test and evaluation of software intensive systems that display data on a geospatial foundation.

1.3.4 Assess accuracy, reliability, and operational utility of remote sensing and C4ISR geospatial intelligence collection systems.

1.3.5 Perform vigorous Verification, Validation and Accreditation (VV&A) on emergent geospatial tools and methods to the standards and specifications documented in US Army regulation.

1.3.6 Develop and apply new technologies and processes related to Geospatial/GEOINT Exploitation tools, Full Motion Video (FMV), Activity-Based Intelligence (ABI), Structured Observation Management (SOM), Advance Geospatial Intelligence (AGI), Wide Area Motion Imagery (WAMI) and other trade crafts.

1.3.7 Develop, integrate and operate ground segments/stations for the Intelligence, Surveillance and Reconnaissance (ISR) payload types (e.g., Electro-optical Infrared (EO/IR), Hyperspectral Infrared Sounder (HIS), Light Detection and Ranging (LIDAR), Radio Detection and Ranging (RADAR), Signals Intelligence (SIGINT), communications, etc.).

1.3.8 Examine and evaluate technologies and tools from Government, Academia, and Industry including, but not limited to, Commercial Joint Mapping Toolkit (C/JMTK) and C4ISR tools.

1.3.9 Prepare documentation to support planning, designing developing and implementing large scale enterprise geospatial systems, and geospatial software development; Develop common geospatial applications, services, and widgets. Develop training and integrated logistics products such as training support packages, lesson plans, program of instruction, user manuals, materials, media, manuals, assessment plans etc. to support enterprise implementation.

1.3.10 Develop and operate test suites of hardware and software that are capable of testing the exchange of geospatial data between Army mission command systems. Conduct tests and experiments on the test suite.

1.4 Personnel

1.4.1 The Contractor shall provide experienced personnel to perform the required services. The Government and the Contractor understand and agree that the services to be delivered are non-personal services and both parties recognize and agree that no employer-employee relationships exist between the Government and the Contractor and/or between the Government and the Contractor’s employees. Contactor personnel performing under this contract shall not be placed in a position where they are employed by a Federal Officer or are under the supervision, direction, or evaluation of a Federal Officer, military or civilian.

1.4.2. Contractor personnel shall conform to standards of conduct and code of ethics, which are consistent with those applicable to Government employees as provided in the Joint Ethics Regulation 5500.7.R. Contractor personnel shall present a neat professional appearance and be easily identified. This shall be accomplished by wearing distinctive clothing bearing the company name or by wearing appropriate badges that contain the company name and employee’s name. The contracting officer may require the Contractor to remove from the job site an employee working under this contract for reason for misconduct, security violations, or found to be suspected to be under the influence of alcohol, drugs or other incapacitating agent. Contractor employees shall be subject to dismissal from the premises upon determination by the Contracting Officer that such action is in the best interest of the Government. Such removal from the job site or dismissal from the premises shall not relieve the Contractor of the requirement to provide sufficient personnel to perform the services as required by this contract.

1.4.3. The Contractor shall comply with all applicable laws, rules and regulations.

1.4.4. Contractor personnel will obtain a Common Access Card (CAC) for computer access as required and detailed in each task order.

1.4.5. Background Checks. All Contractor personnel hired under this contract must have a favorable National Agency Check and Inquiries (NACI) investigation as a condition to access Federal facilities and information systems. A Secret Security Clearance will be an acceptable substitute for a NACI. Personnel who do not receive a favorable NACI will not be allowed to perform services under this contract.

1.4.6 Key Personnel

Certain skilled experienced professional and/or technical personnel are essential for successful Contractor accomplishment of the work to be performed under this task order. These are defined as "Key Personnel" and are those persons whose resumes are submitted for evaluation with this proposal. Key Personnel for this task order will be at the Contractor’s discretion, but will include at a minimum a Program Manager, System Engineer, Software Engineer, and Hardware Engineer. The Contractor shall notify the contracting officer in writing as to whom will fill these key personnel roles. Key personnel shall be available between 8:00 a.m. to 4:30p.m., Monday thru Friday except Federal holidays or when the Government facility is closed for administrative reasons. An emergency notification list shall be maintained for all Contractor employees.

The emergency notification list and any updates shall be made available to the Government’s and AGC’s Program Managers. The Contractor shall have all Key Personnel on board on Date of Award (DOA). All Key Personnel shall notify the Contracting Officer whenever they believe they are receiving direction that deviates from the terms of the contract. The Contractor shall notify the AGC Contracting Officer if they intend to substitute any individual serving as key personnel. In the event of such substitution/replacement, key personnel must have equivalent qualifications or better to the original individual intended to fill the specified role. Key personnel on this contract including subs, are subject to AGC Contracting Office approval.

1.4.7. Key Personnel Labor Categories, Descriptions and Qualifications

The Contractor shall submit their proposed key personnel to meet the Government’s needs based upon the key tasks within the PWS. The Contractor shall include the title of the key personnel, the qualifications to meet the Government need as well as the educational experience necessary to successfully perform as the key personnel on the task. The Government holds the right to add necessary qualifications and/or educational experience of the proposed key personnel to perform the tasks based upon specific task order requirements and/or skills needed.

1.5 Period and place of Performance

1.5.1 The basic contract period of performance is twenty-four (24) months with one base year of twelve (12) months and a twelve (12) month option.

1.5.2 The Contractor shall provide on and off-site services in support of AGC’s tasks. Design, development, engineering and testing are expected to take place at CONUS locations.

1.6 Scope

The Contractor shall provide highly specialized expertise and technical services to execute the objectives of this PWS that directly correlates to the overarching objectives and goals of the AGC’s overall mission. The Contractor shall provide all personnel and supervision necessary to perform the services defined in the PWS. All tasks must be performed to the standards set forth in this document.

1.7 General Information

1.7.1 Access to and Disclosure of Information

The Contractor may require access to data and information proprietary to a Government agency, another Government Contractor, or of such nature that its dissemination or use, other than as specified in this contract, would be adverse to the interests of the Government or others. Neither the Contractor, nor Contractor employees shall divulge or release data or information developed or obtained under performance of this contract, except to authorized Government personnel or upon written approval of the COR or designated representative. The Contractor shall not use, disclose, or reproduce proprietary information bearing a restrictive legend, other than as specified in the contract.

Disclosure of information regarding operations and services of the activity to persons not entitled to receive it, or failure to safeguard any classified, proprietary or other similar items or information that may come to the Contractor (or any persons under the Contractor’s control) in connection with work under this contract, may subject the Contractor, Contractor’s agent, or employees to criminal liability under Title 18, Sections 793 and 798 and/or other sections of the United States Code. Neither the Contractor nor the Contractor’s employees shall disclose or cause to be disseminated, any information concerning the operations of the activity that could result in, or increase the likelihood of, the possibility of a breach of the activities’ security or interrupt the continuity of operations.

The Contractor shall direct to the Project Officer/COR, all inquiries, comments, or complaints arising from matters observed, experienced, or learned as a result of, or in connection with the performance of this contract, the resolution of which may require the dissemination of official information.

Inquiries received by the Contractor for work performed under this contract shall be referred to the Government for evaluation under the Freedom of Information Act (FOIA) of 1975, Public Law 93-502, 5 U.S.C., Section 552. The Government FOIA officer shall be responsible for determining whether such requests will be honored. The Contractor will not release any information concerning the project to the public without written authorization from the Government.

The Contractor shall not release any information (including photographs, files, public announcements, statements, denials, or confirmations) on any part of the subject matter of this contract, or any phase of any program hereunder, without the prior written approval of the Project Officer/COR. The Contractor shall not release information regarding individuals without prior authority of the Project Officer/COR. Any documentation showing individuals’ names or other personal information will be controlled and protected. The provisions of the Privacy Act of 1974, Public Law 93-579, 5 U.S.C., Section 552a, shall apply.

1.7.2 Quality Control. The Contractor shall develop and maintain an effective quality control plan (QCP) to ensure services are performed in accordance with this PWS. The Contractor shall develop and implement procedures to identify, prevent, and ensure non-recurrence of defective services. The Contractor’s QCP is the means by which the Contractor assures its work complies with the requirements of the contract. As a minimum, the Contractor shall develop QCP procedures that address the areas identified in Specific Tasks Section 5 and the Technical Exhibit 1, “Performance Requirements Summary”. Each Contractor will be required to submit a QCP with its proposal. The Contractor shall receive the Contracting Officer’s acceptance in writing of any proposed change to the QCP in advance of implementation. The QCP shall:

1.7.2.1. Have direct accountability to the Contractor’s top management.

1.7.2.2. Address overall project management and administration.

1.7.2.3. Be a comprehensive program to plan and deliver quality services to the Government.

1.7.2.4. Cover all services described in this contract, prioritize services, and concentrate on the most essential services as identified in the Performance Requirements Summary (PRS).

1.7.2.5. Describe a method, acceptable to the Government, of identifying deficiencies in the quality of service performed under this contract before the level of performance becomes unacceptable, and address processes for corrective actions without dependence upon Government direction.

1.7.2.6. Establish an inspection system covering all services required by this contract. This plan shall specify areas to be inspected on both a scheduled or unscheduled basis and the title of the individual who will do the inspection. The Contractor will provide the ACO with a current list of all titled positions and the names of the incumbents.

1.7.2.7. Contain specific quality control techniques for contract services identified in the PRS. The quality control methods shall be comprehensive and adaptable to the reporting systems of the QCP.

1.7.2.8. Include a customer complaint feedback system for correction of validated complaints and to inform the customer of corrections. The QCP shall describe how users, or other interested parties, may identify problem areas or situations to the Contractor. The customer complaint program shall be compatible with the reporting and communication systems of the QCP.

1.7.2.9. Require documentation of all Contractor quality control inspections and corrective actions be maintained by the contactor throughout the term of this contract. Copies of inspection documents will be provided to the ACO upon request.

1.7.2.10. Describe methods of direct and indirect communications with the Government regarding performance of the contract. The QCP shall include regular and formal meetings with the Government and proposed formats and/or schedules for informal communications (e.g., periodic e-mails to the Project Officer/COR).

1.7.3 Quality Assurance. The Government will evaluate the Contractor’s performance under this contract in accordance with the Quality Assurance Surveillance Plan (QASP). The QASP is the method the Government will use to measure Contractor performance in accordance with the performance standards. It defines how the performance standards will be applied, the frequency of surveillance, and the minimum acceptable defect rate(s).

1.7.4 Recognized Holidays. The AGC observes the following Federal holidays:

New Year's Day Labor Day Martin Luther King Jr.’s Birthday Columbus Day President’s Day Veteran’s Day Memorial Day Thanksgiving Day Independence Day Christmas Day

Note: When a holiday occurs on a Saturday, Federal employees are normally granted the previous Friday as the holiday observance. When a holiday occurs on a Sunday, Federal employees are normally granted the following Monday as the holiday observance.

1.7.5 Hours of Operation. The Contractor shall be responsible for providing requested services, between the hours of 0630-1800 EDT or EST, Monday thru Friday, with 8-hour workdays, the expected norm. Flexible schedules for each individual may be accommodated, but must be authorized by the COR and Government Project Manager. Some personnel may be required to work a varied schedule outside of the foregoing. These assignments may extend the work week beyond the expected normal operations of 8-hour workdays, depending on the needs of the Government.

All work performed by the Contractor personnel will be at a location/s directed by the Government. The Contractor must have the ability to work at the Contractor’s site, if due to inclement weather or other unforeseen circumstances the Government site is closed. The Contractor shall at all times maintain an adequate workforce for the uninterrupted performance of all tasks defined within this PWS when the Government facility is not closed for the above reasons.

The Contractor shall keep in mind that the stability and continuity of the workforce are essential.

1.7.6 Type of Contract. The Government anticipates awarding Cost Plus Fixed Fee Task Order contract that will consist of a one-year base ordering period, with a one-year option for a total of twenty-four (24) months.

1.7.7 Security Requirements

1.7.7.1 The Contractor will be required to have access to Unclassified, For Official Use Only (FOUO), Secret, Top Secret (TS), and Sensitive Compartmented Information (SCI), during their performance of this contract. Contractor personnel requiring access to Government data shall hold at least a Secret clearance and shall be eligible for access to Top Secret, and SCI data. A DD Form 254, Contract Security Classification specification, will be prepared by the ordering agency and issued with the task order, providing specific classification guidance.

1.7.7.2 All Key Contractor personnel shall possess TOP SECRET clearance and be eligible for SCI adjudication on the start date of the period of performance. All remaining Contractor personnel shall possess at a minimum SECRET clearances.

1.7.7.3 The Contractor shall perform in accordance with the Department of Defense (DoD) Industrial Security Manual (DoD 5220.22M) and ensure that classified material is handled in accordance with the latest appropriate security classification specifications.

1.7.7.4 Loss or suspension of required security clearance as set forth on the DD Form 254, “Contract Security Classification Specifications”, would result in the Contractor’s inability to perform in accordance with the terms and conditions of this contract. As a result of this failure to perform, the Contractor is subject to termination under the appropriate termination clause herein.

1.7.7.5 Facility Requirements

Based on task order requirements, the Contractor will be required to have a TOP SECRET facility clearance with SECRET safeguarding capabilities. The Contractor shall require access to Communications Security (COMSEC) information, SCI, Non-SCI intelligence information, and FOUO information. The Contractor shall also require access to the JWICS/SIPRNET/NIPRNET Systems. These are necessary to perform the C4ISR mission requirements and enable open access to sensor information required to develop and operate in a classified environment.

1.7.7.6 The Contractor shall comply with all applicable DoD security regulations and procedures during the performance of this contract. The Contractor shall not disclose and must safeguard procurement sensitive information, computer systems and data, Privacy Act data, and Government personnel work products that are obtained or generated in the performance of this contract. This includes dissemination of protocols and papers not generally available through the public literature.

1.7.7.7 Anti-Terrorism (AT) Awareness Training for Contractor Personnel Traveling Overseas. All US based Contractor employees and associated sub-Contractor employees traveling overseas will receive the Government provided Area of Responsibility (AOR) specific AT awareness training prior to departure.

1.7.7.8 Contractor Employees Who Require Access to Government Information Systems. All Contractor employees with access to a Government info system must be registered in the Army Training Certification Tracking System (ATCTS) at commencement of services, and must successfully complete the DOD Information Assurance Awareness prior to access to the information systems and then annually thereafter IAW AR 380-67 (Personnel Security Program) and Homeland Security Presidential Directive 12 (Policy for a Common Identification Standard for Federal Employees and Contractors).

1.7.7.9 Handling Requirements: In performing this contract, the Contractor may receive and generate classified material, modify, or store classified hardware, have access to classified information outside the U.S, Puerto Rico, U.S.

possessions and trust territories, require a COMSEC account, have Operations Security (OPSEC) requirements, and be authorized to use the Defense Courier Service.

1.7.7.10 OPSEC Standing Operating Procedure/Plan (CDRL A021). The Contractor shall develop an OPSEC SOP/Plan in accordance with AR 530-1, Operations Security, within 90 days of contract award. The OPSEC SOP/Plan must be reviewed and approved by the RA OPSEC Officer. The SOP/Plan will include the Government's critical information, why it needs to be protected, where it is located, who is responsible for it, and how to protect it.

1.7.7.11 Contractors Authorized to Accompany the Force. All Contractor employees shall ensure the following AT/OPSEC requirements are met prior to deploying personnel authorized to accompany U.S. Armed Forces outside the United States: required compliance with laws and regulations, pre-deployment requirements, required training (per combatant command guidance), and personnel data required

1.7.7.12 Performance or Delivery in a Foreign Country. All contracting personnel will comply with theater clearance requirements and allows the combatant commander to exercise oversight to ensure the Contractor’s compliance with combatant commander and subordinate task force commander policies and directives.

1.7.7.13 Key Control: The need for key control may be required based on this task order. Contractor personnel shall establish and implement methods of making sure all keys/key cards issued to the Contractor by the Government are not lost or misplaced and are not used by unauthorized persons. NOTE: All references to keys include key cards. No keys issued to the Contractor by the Government shall be duplicated. The Contractor shall develop procedures covering key control that shall be included in the Quality Control Plan. Such procedures shall include turn-in of any issued keys by personnel who no longer require access to locked areas. The Contractor shall immediately report any occurrences of lost or duplicate keys/key cards to the Contracting Officer.

1.7.7.13.1. In the event keys, other than master keys, are lost or duplicated, the Contractor shall, upon direction of the Contracting Officer, re-key or replace the affected lock or locks; however, the Government, at its option, may replace the affected lock or locks or perform re-keying. When the replacement of locks or re-keying is performed by the Government, the total cost of re-keying or the replacement of the lock or locks shall be deducted from the monthly payment due the Contractor. In the event a master key is lost or duplicated, all locks and keys for that system shall be replaced by the Government and the total cost deducted from the monthly payment due the Contractor.

1.7.7.13.2. The Contractor shall prohibit the use of Government issued keys/key cards by any persons other than the Contractor’s employees. The Contractor shall prohibit the opening of locked areas by Contractor employees to permit entrance of persons other than Contractor employees engaged in the performance of assigned work in those areas, or personnel authorized entrance by the Contracting Officer.

1.7.8 Personal Identity Verification (PIV)

1.7.8.1 The Contractor shall comply with PIV procedures implemented by Homeland Security Presidential Directive- 12 (HSPD-12), Federal Information Processing Standards Publication (FIPS PUB) Number 201-1, Office of Management and Budget (OMB) Guidance M-05-24.

1.7.8.2 The Contractor shall insert this clause, FAR 52.204-9 as required by FAR 4.1303, in all subcontracts when the SubContractor is required to have physical access to a Federally-controlled facility or access to a Federally-controlled information system.

1.7.8.3 In accordance with HSPD-12, OMB M-05-24 and FIPS 201-1, unless a previous favorable background investigation has been completed in the last ten (10) years, all Contractor employees shall be the subject of a background investigation conducted by the Government.

1.7.8.4 No Contractor employee shall commence work until the Personnel Security Questionnaire (PSQ) paperwork has been completed, reviewed and submitted to the Office of Personnel Management (OPM).

1.7.8.5 Contractor employees not meeting the minimum PIV requirements shall be the subject of a National Crime Information Center (NCIC) check prior to beginning work in addition to the submission of the PSQ to OPM.

1.7.8.6 Non-US citizens shall not be used in the performance of this contract unless the provisions of Army Regulation 25-2, Information Assurance have been fully completed and approval has been granted by the Government for the non-US citizen to perform the required mission.

1.7.9 Visit Notifications

1.7.9.1 If the Contractor has previously been granted a facility clearance (FCL) through the Defense Industrial Security Clearance Office (DISCO), the Contractor Facility Security Officer (FSO) shall submit visit notifications via Joint Personnel Adjudication System (JPAS) in the format prescribed and provided by AGC Security through the Government COR.

1.7.9.2 If the Contractor is not cleared through DISCO, the Contractor shall submit a signed visit request on company letterhead stationary through the Government COR. The request shall include the full name (last, first, middle), date of birth (MM/DD/YYYY), place of birth (city, state, country), citizenship, type of last investigation and date last investigation was completed, if any, and shall be the subject of a NCIC check prior to beginning work.

1.7.10 Regulations

All Contractor employees shall read all applicable security regulations, to be provided by the Government. Contractor personnel shall familiarize themselves with the Government’s regulations and policies and site-specific regulations regarding access to sensitive materials, computer facility/IT network access, issue of access credentials which shall be provided as required by the Government.

1.7.11 Physical Security

Some work shall be performed off the Government site however, when the Contractor is required to work on the Government site, the Contractor shall be responsible for safeguarding all Government information and property provided for Contractor use based on direction from the COR as applicable. At the close of each work period, Government facilities, equipment, and materials shall be secured.

1.7.12 Access Credentials

The Contractor shall establish and implement methods of making sure all access credentials (CAC; DD Form 1466, DoD Building Pass) issued to the Contractor employees by the Government are not lost or misplaced and are not used by unauthorized persons. No access credentials issued to the Contractor by the Government shall be duplicated. The Contractor shall develop procedures covering access credentials that shall be included in the Quality Control Plan.

Such procedures shall include turn-in of any issued access credentials by Contractor personnel who no longer require access to Government information systems or Government facilities. The Contractor shall immediately report any occurrences of lost access credentials to the COR.

1.7.12.1 In the event access credentials are lost or damaged, the Contractor employee shall immediately notify the COR who will notify AGC Security of the loss or damage and request re-issue of the credential.

1.7.12.2. Multiple occurrences of loss or damaged access credentials shall be reported to the Contracting Officer.

When the replacement of access credentials is performed by the Government, the total cost of re-issuing the credential(s) shall be deducted from the monthly payment due the Contractor.

1.7.12.3 The Contractor shall prohibit the use of Government issued access credentials by any persons other than the Contractor employee to whom the credential is issued. The Contractor shall prohibit the opening of secure or locked areas by Contractor employees to permit entrance of persons other than Contractor employees engaged in the performance of assigned work in those areas, or personnel authorized entrance by the AGC Security Office.

1.7.13 Identification of Contracting Employees

All Contractor personnel attending meetings, answering Government telephones and working in other situations where their Contractor status is not obvious to third parties shall identify themselves as such to avoid creating an impression in the minds of members of the public that they are Government officials. Contractor personnel shall also ensure that all documents or reports produced are suitably marked as Contractor products or that Contractor participation is appropriately disclosed. Contractor employees with assigned duties requiring on-site performance shall meet the requirements to obtain either a Department of Defense, or AGC, building pass. Contractor employees requiring use of Government information systems or facilities shall meet the criteria required to obtain a Common Access Card and building specific identification badge requirements/specifications.

1.7.14 Anti-Terrorism and Operations Security Requirements

1.7.14.1 AT Level I Training. All Contractor employees, to include subContractor employees, requiring access to Army installations, facilities and controlled access areas shall complete AT Level I awareness training within 30 calendar days after contract start date or effective date of incorporation of this requirement into the contract, whichever is applicable. The Contractor shall submit certificates of completion for each affected Contractor employee and subContractor employee, to the COR or to the contracting officer, if a COR is not assigned, within 15 calendar days after completion of training by all employees and subContractor personnel. AT level I awareness training is available at the following website: https://atlevel1.dtic.mil/at.

1.7.14.2 Access and General Protection/Security Policy and Procedures. Contractor and all associated sub-Contractors employees shall comply with applicable installation, facility and area commander installation/facility access and local security policies and procedures (provided by the Government representative). The Contractor shall also provide all information required for background checks to meet installation access requirements to be accomplished by installation Provost Marshal Office, Director of Emergency Services or Security Office. Contractor workforce must comply with all personal identity verification requirements as directed by DOD, Headquarters, Department of the Army (HQDA) and/or local policy. In addition to the changes otherwise authorized by the changes clause of this contract, should the Force Protection Condition (FPCON) at any individual facility or installation change, the Government may require changes in Contractor security matters or processes.

1.7.14.3 iWATCH Training. The Contractor and all associated sub-Contractors shall brief all employees on the local iWATCH program (training standards provided by the requiring activity ATO). This local developed training will be used to inform employees of the types of behavior to watch for and instruct employees to report suspicious activity to the COR. This training shall be completed within 30 calendar days of contract award and within 15 calendar days of new employees commencing performance with the results reported to the COR NLT 45 calendar days after contract award.

1.7.14.4 Contractor Employees Who Require Access to Government Information Systems. All Contractor employees with access to a Government info system must be registered in the ATCTS at commencement of services, and must successfully complete the DOD Information Assurance Awareness prior to access to the Information System (IS) and then annually thereafter.

1.7.14.5 For Contracts that Require OPSEC Training. Per AR 530-1, Operations Security, new Contractor employees must complete Level I OPSEC training within 30 calendar days of their reporting for duty. All Contractor employees must complete annual OPSEC awareness training and adhere to the organization’s security program.

1.7.14.6 For Information assurance (IA)/information technology (IT) training. All Contractor employees and associated sub-Contractor employees must complete the DoD IA awareness training before issuance of network access and annually thereafter. All Contractor employees working IA/IT functions must comply with DoD and Army training requirements in DoDD 8570.01, DoD 8570.01-M and AR 25-2 within six months of employment.

1.7.14.7 For IA/IT certification. Per DoD 8570.01-M , DFARS 252.239.7001 and AR 25-2, the Contractor employees responsible for IA/IT functions shall be appropriately certified upon contract award. The baseline certification as stipulated in DoD 8570.01-M must be completed upon contract award.

1.7.15 Post Award Conference/Periodic Progress Meetings

The Contractor shall attend any post award conference convened by the contracting activity or contract administration office in accordance with Federal Acquisition Regulation Subpart 42.5. The Contracting Officer, Contracting Officers Representative (COR), and other Government personnel, as appropriate, may meet periodically with the Contractor to review the Contractor's performance. At these meetings the Contracting Officer will apprise the Contractor of how the Government views the Contractor's performance and the Contractor shall apprise the Government of problems, if any, being experienced. Appropriate action shall be taken to resolve outstanding issues. These meetings shall be at no additional cost to the Government.

1.7.16 Contracting Officer Representative (COR)

The COR will be identified by separate letter. The COR monitors all technical aspects of the contract and assists in contract administration. The COR is authorized to perform the following functions: assure that the Contractor performs the technical requirements of the contract; perform inspections necessary in connection with contract performance; maintain written and oral communications with the Contractor concerning technical aspects of the contract; issue written interpretations of technical requirements, including Government drawings, designs, specifications; monitor Contractor's performance and notify both the Contracting Officer and Contractor of any deficiencies; coordinate availability of Government furnished property, and provide site entry of Contractor personnel.

A letter of designation issued to the COR, a copy of which is sent to the Contractor, states the responsibilities and limitations of the COR, especially with regard to changes in cost or price, estimates or changes in delivery dates. The COR is not authorized to change any of the terms and conditions of the resulting contract. The warranted Contracting Officer is the only entity with authorization to negotiate and make changes to this contract.

1.7.17 Travel

1.7.17.1 Area of Travel. The Contractor may be required to travel to several locations within the CONUS to support the development of demonstration, exercises and/or experiments. Specifically, travel may include testing the prototype at several locations to include but not limited to: Fredericksburg, VA; Manassas, VA; Hanscom AFB, MA; Yuma, AZ; Camp Pendelton, CA; and White Sands Missle Range, NM.

1.7.17.2 Travel Policy. The Government will reimburse the Contractor for allowable travel costs incurred by the Contractor in performance of the contract and determined to be in accordance with FAR subpart 31.2, subject to the following provisions: Travel required for tasks assigned under this contract shall be governed in accordance with rules set forth for temporary duty travel in the Department of Defense Joint Travel Regulations (JTR). All travel and expenses must be approved by the COR in writing, prior to travel.

1.7.17.3 Travel. Travel, subsistence, and associated labor charges for travel time are authorized for travel beyond a 50-mile radius of the local office, whenever a task assignment requires work to be accomplished at an alternate work site. No travel, subsistence or associated labor charges for travel time shall be charged for work performed within a 50-mile radius of the Contractor’s local office, normal work site, or temporary work site unless approved in advance by the Contracting Officer Representative (COR). Under no circumstances will costs be reimbursed for travel performed for personal convenience and daily travel to and from the normal work site, to include parking expenses.

Part 2. Definitions and Acronyms

2.1 Definitions

2.1.1. AUTHORITIVE DATA SOURCE (ADS). An Authoritative Data Source is a recognized or official data production source with a designated mission statement or source/product to publish reliable and accurate data for subsequent use by users. An Authoritative Data Source may be the functional combination of multiple or separate data sources. Authoritative Data Sources provide enterprise-accepted and trusted information for reuse, analysis, and aggregation, which ultimately leads to accurate choices, rapid decisions, and a wealth of knowledge. Once a proposed source is certified by the Army Data Council as authoritative, it is registered in the ADS Registry so users can determine which of many sources containing information is authoritative and ensures the user of the most accurate, timely, trusted data.

2.1.2 AUDITABLE SOURCE SYSTEM. An auditable source system is one where information is first recorded from the original documents and/or business process. Auditable source documents substantiate the integrity of the data being used.

2.1.3 CONTRACTOR. A supplier or vendor having a contract to provide specific supplies or service to the Government. The term used in this contract refers to the prime.

2.1.4 CONTRACTING OFFICER. A person with authority to enter into, administer, and or terminate contracts, and make related determinations and findings on behalf of the Government. Note: The only individual who can legally bind the Government.

2.1.5 CONTRACTING OFFICER'S REPRESENTATIVE (COR). An employee of the U.S. Government appointed by the contracting officer to administer the contract. Such appointment shall be in writing and shall state the scope of authority and limitations. This individual has authority to provide technical direction to the Contractor as long as that direction is within the scope of the contract, does not constitute a change, and has no funding implications. This individual does NOT have authority to change the terms and conditions of the contract.

2.1.6 DEFECTIVE SERVICE. A service output that does not meet the standard of performance associated with the

PWS.

2.1.7 DELIVERABLE. Anything that can be physically delivered but may include non-physical things such as meeting minutes.

2.1.8 KEY PERSONNEL. Contractor personnel that may be required to be used in the performance of a contract by the Key Personnel listed in the PWS.

2.1.9 PHYSICAL SECURITY. Actions that prevent the loss or damage of Government property.

2.1.10 QUALITY ASSURANCE. The Government procedures to verify that services being performed by the Contractor are performed according to acceptable standards.

2.1.11 QUALITY ASSURANCE SURVEILLANCE PLAN (QASP). An organized written document specifying the surveillance methodology to be used for surveillance of Contractor performance.

2.1.12 QUALITY CONTROL. All necessary measures taken by the Contractor to assure that the quality of an end product or service shall meet contract requirements.

2.1.13 SUBCONTRACTOR. One that enters into a contract with a prime Contractor. The Government does not have privacies of contract with the SubContractor.

2.1.14 WORK DAY. The number of hours per day the Contractor provides services in accordance with the contract.

2.1.15 WORK WEEK. Is defined as Monday through Friday, unless specified otherwise.

2.2 Acronyms

ADS Authoritative Data Source AGC Army Geospatial Center AGE Army Geospatial Enterprise AGI Advanced Geospatial Intelligence AGL Above Ground Level ANSI American National Standards Institute AOR Area of Responsibility C4ISR Command, Control, Communications, Computers, Intelligence, Surveillance and

Reconnaissance CDR Critical Design Review CI/HUMINT Counter-Intelligence Human Intelligence C/JMTK Commercial Joint Mapping Toolkit CENTCOM Central Command CF Coalition Forces CFE Contractor Furnished Equipment COCOM Combatant Command CONUS Continental United States (excludes Alaska and Hawaii) COTS Commercial Off the Shelf DEM Digital Elevation Model DOD Department of Defense EO/IR Electro-Optical Infrared FMV Full Motion Video FPCON Force Protection Condition GCS Ground Control Station GEOINT Geospatial Intelligence GIS Geographic Information System GeoTIFF Geographically Tagged Image File Format GFE Government Furnished Equipment GFI Government Furnished Information GPS Global Positioning System GRIDS Geospatial Research, Integration, Development and Support GSE Ground Support Equipment HIS Hyperspectral Infrared Sounder HQDA Headquarters, Department of the Army IA Information Assurance IMINT Imagery Intelligence IPR Interim Program Review IPT Integrated Product Team ISR Intelligence, Surveillance and Reconnaissance IT Information Technology

JP2 JPEG 2000

JPG Joint Photographic Experts Group LAS LASer File Format Exchange LIDAR Light Detection and Ranging MASINT Measurement and Signature Intelligence MrSID Multi0resolution Seamless Image Database M&S Modeling and Simulation PDR Preliminary Design Review PIPO Phase In/Phase Out PM Program Manager

POC Point of Contact POR Programs of Record PRS Performance Requirements Summary PWS Performance Work Statement RADAR Radio Detection and Ranging RSC Regional Support Commands SCD Software Code Delivery SCI Sensitive Compartmented Information SDD Software Design Description SDP Software Development Plan SDLC Software Development Life Cycle SIA System Interface Agreements SIGINT Signals Intelligence SME Subject Matter Expert SOP Standard Operating Procedure SRS Software Requirements Specifications STP Software Test Plan TE Technical Exhibit UID Unique Identifiers UML Universal Modeling Language USACE US Army Corps of Engineers VDD Version Description Document VV&A Verification, Validation and Accreditation WAMI Wide Area Motion Imagery

Part 3. Government Furnished Items and Services

3.1 General

The Contractor shall specify any and all Government Furnished Equipment/Government Furnished Information (GFE/GFI) requirements and timelines to facilitate the execution of this contract.

3.1.1 The Contract COR with the Army Geospatial Center will sponsor Army Knowledge Online (AKO) accounts.

3.1.2 The Contract COR with the Army Geospatial Center will provide CAC cards for the Contractor personnel.

3.2 Facilities

The Government will provide the necessary workspace and utilities when available for the Contractor staff to execute as outlined this PWS to include meeting space, desk space, telephones, network access, computers, and other items necessary to maintain an office environment for work required to be performed at Government facilities.

3.3 Government Property

The Government will obtain all data rights associated with any software or potential hardware development that may occur under this contract, excluding Commercial Off the Shelf (COTS) hardware or software. Per FAR 27.406 (b) (1), it is not feasible to ascertain all the data requirements at this time, however the clause 52.227-16, Additional Data Requirements, may be used to enable the subsequent ordering by the contracting officer of additional data first produced or specifically used in the performance of such contracts as the actual requirements become known.

Part 4. Contractor Furnished Items and Responsibilities

4. General

The Contractor shall furnish all supplies, equipment, facilities, personnel and services required to perform work under this contract that are not listed under Part 3 of this PWS.

Part 5. Specific Tasks

5. Basic Services

The Contractor shall execute all tasks as identified in sections 5.1 to 5.11. All deliverables shall be draft documents until accepted by the Program Manager. Deliverables (draft and final) shall be delivered to the Program Manager and Contracting Officer with a cover letter identifying project task and executive summary describing deliverables.

Parameters for image details will be discussed using Threshold and Objective requirements: (T) = Threshold; (O) = Objective. Nothing below the Threshold parameter will be considered for evaluation.

5.1. Conduct Geospatial Research

5.1.1 The Contractor shall conduct GEOINT Systems research, development, engineering, analysis and operations, including identifying and addressing gaps. The Contractor shall provide a sensor that will deliver to the Government an improved NADIR and OFF NADIR, rapid, collection system to allow for dense urban environment 3D rendering and/or foliage penetration. The Contractor is encouraged to utilize state of the art technology and provide new and innovative ideas to create a sensor that can provide data to satisfy the end state of providing 3D model generation of dense urban environments to a level of detail needed for mission rehearsals. Final products will include detailed 3D rendering of urban environments that may reduce in detail from center of city outward to the edges of the urban environment. Final products will include primary, secondary, and tertiary routes; landing zones, Line of Sight, and 3D details within the total city confines. The use of EO and LIDAR parameters may be used as a source for the Government’s requirements. It is up to the Contractor’s discretion to meet the Government’s needs with other types of sensors/concepts through their proposed solution.

5.1.2 The Contractor shall design a flight payload to allow for (T) manned or (O) unmanned operations.

5.1.3 Altitude of collection should be no less than 20,000 Above Ground Level (AGL) (T); 25,000 AGL is desired (O). Resolution of final imagery must be at a minimum (O) .2 – (T) .5 meter posting LIDAR and (T) 5cm – (O) 2 cm for EO NADIR. Final geo-registered, orthorectified color imagery should be at a minimum (O) 2-10 (T) cm resolution with (T) 1 meter - .5 (O) resolution elevation data. Off NADIR resolution should be at a minimum (T) 20-10 (O) cm after final processing (orthorectified/geo-registered).

5.1.4 Collection of EO and LIDAR must be at a collection rate that allows for rapid dissemination of high value areas of interest. Maximum time between collection and dissemination of orthorectified imagery should be no more than

(T) 72 Hours with the objective (O) of 24 Hours.

5.1.5 Absolute Accuracy. The NADIR LIDAR accuracy should be at Horizontal: (O) 50cm RMSExy, (T) 1m RMSExy; Vertical: (O) 10cm RMSEz, (T) 20cm RMSEz; The NADIR EO accuracy should be at Horizontal: (O) 50cm RMSExy, (T) 1m RMSExy

5.1.6 Mounting of sensor to collection system should be platform independent to allow for maximum flexibility in collection capability.

5.1.7 The Contractor will ensure all data is capable of being easily ingested and processed with available standards and processing methods (i.e. NITF, LAS, LASzip, GEOTIFF, Orthorectified Mr. SID and/or NITF Geo-referenced tiled images). Final product imagery should be in 2km x 2km tiles.

5.1.8 The Contractor shall provide elevation intensity images depicting reflectivity of the surface topography in grayscale as derived from the point cloud tiles.

5.1.9 The Contractor shall provide elevation classifications using the LAS specification for…