Attachment 0001 - AED Requirements AX9M9025AX.pdf

07/09/2018

2018H052PRID 7-311411003-625Part Number

1615-01-512-0889NSN AH-64 D/ESystem

HEAD ROTARY WING, MAINNomenclature

YAdequate DMWR Available?

DMWR-1-1615-312DMWR ID

07/09/2010DMWR Date

1DMWR Chg #

YPre-Award Survey Recommended?

NCorrelation Performance Study Required ? YPVA Recommended?

Special Processes include: Fluorescent Penetrant Inspection, Shot Peen, Surface Finish Inspection, Magnetic Particle Inspection and Fixed process control for finishing holes, edges and surfaces of stainless steel laminates. Test Procedures: WP 0080.

Measurement and Test Equipment calibration instructions: WP 0001. Facility Requirements: WP 0003.

Identify Any Special Processes, Test Procedures, and/or Instructions

YCritical Safety Item?

(1) Safety of Flight, H-64-17-SOF-02, Visual inspection of the lower Nut, P/N 7-511411161-3 on the outboard Strap Pack Bolt for Strap Packs, P/Ns 7-311411146-5/-7, and 7-511411146-ALL.

(2) A new Strap Pack is to be fielded in the near future P/N 7-611411146-101.

(3) AED is currently working with Boeing on a new collar to be installed on Strap Pack assemblies. Testing is being scheduled in the near future. At this time the collar does not have a P/N. This should be an AVIM or AVUM task and should be put into the Main Rotor Hub DMWR once it is approved.

Special Airworthiness Considerations

AED Notes: AEM Sustainment has verified the CSI and NST data through the ARISE CIM database on 03/23/2018. This Assembly is CSI and NST. Contains subcomponents that are CSI and NST. Engineering Testing Fatigue, Endurance, and Interchange is not required for Overhaul. Additionally, there is a new QE-STD 2 dated 19June 2017. MW.

Other Requirements / Comments

If the item is not a CSI and no adequate DMWR is available, approved sources, if any, are listed by CAGE as follows:

NSpecial Post-Contract Award Requirements?

Special Post-Contract Award Requirements

The Prime or OEM is required to submit a Frozen Plan 30 days after contract award to Engineering Directorate (ED) and Aviation Engineering Directorate (AED). The Frozen Plan will be reviewed and require approval by ED and AED prior to government acceptance of contract deliverable assets.

Other Requirements / Comments (Part II)

The applicable DMWR contains detailed procedures regarding IUID requirements for this component. These procedures can be found in MEOs E1846, E1847, 1848B, E1849A, E1850, E1851A.

Other Requirements / Comments (Part III)

AED Notes: AEM Sustainment has re-verified the CSI and NST data through ARISE CIM database on 05/08/2018. These were the changes made to the data. Added PNs 7-311411155 and 7-311411155-9. MW.

Other Requirements / Comments (Part IV)

Other Requirements / Comments (Part V)

YDoes QE-STD-2 Apply?

Y

Additional CSI Requirements

CSI Contains CSI Replacement Parts? YEngineering Testing Required?

The Contractor shall flow down the Critical Characteristics and QE-STD-1 to all Suppliers of CSIs.

The solicitation/RFP shall require that all proposals/responses include a special tooling and test equipment section that addresses the contractor's plan to meet all government special tooling and test equipment requirements with either:

1. Physical possession of the required tools, 2. Confirmed requisitions for the required tools, 3. Confirmed arrangements for subcontracting the processes requiring the special tools, or 4. Specific plans describing their technical approach to develop equivalent tools.

RStatus

YTDPL?

08/16/2004Approved Date

M&O AED REQUIREMENTS DATA

Correlation Performance Study Requirements

Commerciality Determination

Commercial Item? N NBest Commercial Practice Acceptable?

1615-01-512-0889NSN AH-64 D/ESystem

RStatus

1615-01-512-0889NSN AH-64 D/ESystem

E1349

E1392

E1459

E1471A

E1479C

E1480A

E1513

E1515A

E1516

E1520B

E1521

E1522

E1523

E1524

E1525

E1526

E1527

E1528

E1529A

E1530

E1531

E1532

E1533

E1534B

E1536

E1537A

E1538

E1539

E1540

E1541A

E1542

E1543

E1544A

E1545

E1547

E1577

E1616

E1618

E1632A

E1649

E1672

E1673

E1677A

E1678

E1680

E1692A

E1698A

E1715

E1761A

The listed workpackages provide a listing of critical tools and test/equipment that require AED approval for substitution. WP 0009, WP 0085, WP 0090, WP 0091, WP 0092, WP 0093, WP 0094, WP 0095, WP 0097, WP

0098.

Critical Tools and Test and Inspection Equipment Requiring AED Approval for Substitutes

MEOs Required for Competitive Contract?

1615-01-512-0889NSN AH-64 D/ESystem

E1846

E1847

E1848B

E1849A

E1850

E1851A

E2010

E2046

E2055

E2109A

E2117

E2144

E2162

E2184

E2206

E2212

E2289

E2305

T7672

T7673A

T7675

T7678A

T7722

T7723A