Attachment 0004_MEO_B2604.pdf

MAINTENANCE ENGINEERING ORDER

(AMCOM Reg. 750-2)

MEO NO.

DATE PAGE 1 of

TITLE Tolerances Unless otherwise noted, dimensions are in inches and tolerances are:

Fractional ………………… ± 1/32 Decimal ………………... ± 0.010 Angular ………………… ± ½°

APPLICABILITY CSI Critical Characteristic Affected?

Impact Statement Attached?

REFERENCES FOR RDECOM USE ONLY

DOCUMENT(S) AFFECTED

PURPOSE OR PROBLEM

PROJECT ENGINEER ENGINEERING REVIEW ENGINEERING RELEASE

MED FORM 5-DEC-09 1401-R-E

B 2604

Nov 9, 2016 1

PILOT-ASSIST HYDRAULIC MODULE ASSEMBLY, 70652-02620-044,

70652-02620-046

Administrative

INTERIM USE OF THIS MEO IS AUTHORIZED

UNTIL AFFECTED DOCUMENT IS UPDATED.

MEO CHANGE TYPE

4) Normal - Can be implemented with normal priorityPRIORITY IMPLEMENTATION CATEGORY

UH60 DAA

DMWR 1-1560-293 (31 August 2012) MEC B318934

DOCUMENT CHANGE IS REQUIRED Verification: Hands-On Table-Top None

4-2.6.e (Proof Pressure Test) - Corrected second SYSTEM gage shutoff to RETURN (WAS duplicate SYSTEM gage shutoff PRESSURE.

GRZELECKI.DAN

IEL.P.125929525

Digitally signed by

GRZELECKI.DANIEL.P.1259295250

DN: c=US, o=U.S. Government, ou=DoD, ou=PKI, ou=USA, cn=GRZELECKI.DANIEL.P.1259295250 Date: 2016.11.03 09:49:22 -05'00'

GONZALEZ.JAC

OB.ALEMAN.145

5821190

Digitally signed by

GONZALEZ.JACOB.ALEMAN.1455821190

DN: c=US, o=U.S. Government, ou=DoD, ou=PKI, ou=CONTRACTOR, cn=GONZALEZ.JACOB.ALEMAN.1455821 Date: 2016.11.03 07:43:39 -05'00'

Jacob Gonzalez

HORN.REINHOL

D.J.1087783495

Digitally signed by

HORN.REINHOLD.J.1087783495

DN: c=US, o=U.S. Government, ou=DoD, ou=PKI, ou=USA, cn=HORN.REINHOLD.J.1087783495 Date: 2016.11.04 16:21:34 -05'00'

Daniel Grzelecki Ron Horn PUBLICATION CHANGE REQUEST: REQUEST THAT THE FOLLOWING DATA BE INCLUDED IN THE NEXT

CHANGE OR REVISION TO THE PUBLICATION IDENTIFIED ABOVE.

WP NO. PAGE

NO.

PARA-

GRAPH

FIGURE/

TABLE

NO.

CHANGES

(EXACT WORDING OF CHANGES MUST BE GIVEN)

4-8 4-2.6.e CHANGE e to read:

e. Open test stand valves PSYS, PPITCH, RSYS, V1, PSYS gage shutoff, RSYS gage shutoff, and PPITCH gage shutoff.

Distribution Statement D:- Distribution authorized to Department of Defense and U.S. DoD contractors only to protect critical technology effective as of 26 June 2014. Other requests for this document must be referred to U.S. Army Aviation and Missile Research, Development and Engineering Center, ATTN: RDMR -AEM , Corpus Christi, TX 78419-5211

MED FORM 30 AUG 2016