W58RGZ-22-B-0010 - 5 Jul 22.pdf

SOLICITATION, OFFER AND AWARD 1. This Contract Is A Rated Order Under

DPAS (15 CFR 700)

Rating Page of Pages

2. Contract Number 3. Solicitation Number 4. Type of Solicitation 5. Date Issued 6. Requisition/Purchase Number Sealed Bid (IFB)

Negotiated (RFP)

7. Issued By Code 8. Address Offer To (If Other Than Item 7)

NOTE: In sealed bid solicitations ‘offer’ and ‘offeror’ mean ‘bid’ and ‘bidder’.

SOLICITATION

9. Sealed offers in original and copies for furnishing the supplies or services in the Schedule will be received at the place specified in item 8, or if handcarried, in the depository located in until (hour) local time (Date).

Caution - Late Submissions, Modifications, and Withdrawals: See Section L, Provision No. 52.214-7 or 52.215-1. All offers are subject to all terms and conditions contained in this solicitation.

10. For Information A. Name B. Telephone (No Collect Calls) C. E-mail Address

Call: Area Code Number Ext.

11. Table Of Contents

(X) Sec. Description Page(s) (X) Sec. Description Page(s)

Part I - The Schedule Part II - Contract Clauses A Solicitation/Contract Form I Contract Clauses

B Supplies or Services and Prices/Costs Part III - List Of Documents, Exhibits, And Other Attach.

C Description/Specs./Work Statement J List of Attachments D Packaging and Marking Part IV - Representations And Instructions E Inspection and Acceptance K Representations, Certifications, and F Deliveries or Performance Other Statements of Offerors G Contract Administration Data L Instrs., Conds., and Notices to Offerors H Special Contract Requirements M Evaluation Factors for Award

OFFER (Must be fully completed by offeror) NOTE: Item 12 does not apply if the solicitation includes the provisions at 52.214-16, Minimum Bid Acceptance Period.

12. In compliance with the above, the undersigned agrees, if this offer is accepted within _____ calendar days (60 calendar days unless a different period is inserted by the offeror) from the date for receipt of offers specified above, to furnish any or all items upon which prices are offered at the price set opposite each item, delivered at the designated point(s), within the time specified in the schedule.

13. Discount For Prompt Payment 10 Calendar Days (%) 20 Calendar Days (%) 30 Calendar Days (%) Calendar Days (%) (See Section I, Clause No. 52.232-8)

14. Acknowledgment of Amendments (The offeror acknowledges Amendment No. Date Amendment No. Date receipt of amendments to the SOLICITATION for offerors and related documents numbered and dated):

15A. Name and Code Facility 16. Name and Title of Person Authorized to Sign Offer Address of (Type or Print) Offeror

15B. Telephone Number 15C. Check if Remittance Address is 17. Signature 18. Offer Date Area Code Number Ext. Different From Above – Enter such

Address In Schedule

AWARD (To be completed by Government)

19. Accepted As To Items Numbered 20. Amount 21. Accounting And Appropriation

22. Authority For Using Other Than Full And Open Competition: 23. Submit Invoices To Address Shown In Item

10 U.S.C. 2304(c)( ) 41 U.S.C. 253(c)( ) (4 copies unless otherwise specified)

24. Administered By (If other than Item 7) Code 25. Payment Will Be Made By Code

26. Name of Contracting Officer (Type or Print) 27. United States Of America 28. Award Date

(Signature of Contracting Officer)

IMPORTANT - Award will be made on this Form, or on Standard Form 26, or by other authorized official written notice.

AUTHORIZED FOR LOCAL REPRODUCTION Standard Form 33 (Rev. 9-97) Previous edition is unusable Prescribed By GSA-FAR (48 CFR) 53.214(c)

W58RGZ-22-B-0010 X 2022JUL05

1 signed

/SIGNED/

2022AUG0403:00pm

DOA1

2022JUL05 SEE SCHEDULE

W58RGZ

ARMY CONTRACTING COMMAND-REDSTONE

REDSTONE ARSENAL AL 35898-5280

SUSAN BRYAN

(256)842-7304

CCAM-ALA

SUSAN.M.BRYAN.CIV@ARMY.MIL

1 68

X 1

X 5 X 14

X 17 X 21

X 29

X 31

X 33

X 53

X 54

X 65

X 68

CONTINUATION SHEET

Reference No. of Document Being Continued Page of

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

SECTION A - SUPPLEMENTAL INFORMATION

Buyer Name: SUSAN BRYAN

Buyer Office Symbol/Telephone Number: CCAM-ALA/(256)842-7304

Type of Contract 1: Firm Fixed Price

Kind of Contract: Maintenance Contracts

*** End of Narrative A0000 ***

W58RGZ-22-B-0010________________

A-1. This is a 100% Small Business Set-Aside (SBSA). The applicable North American Industry Classification Systems (NAICS) code is

333996 and the size standard is 1,250 employees. Only bidders with NAICS code 333996 registered in Sam.gov are eligible to submit a bid. If a bidder who does not have NAICS code 333996 submits a bid, the quote will be deemed non-responsive and the bid will not be considered for award. In addition, the awardee of the resultant contract must be registered with NAICS code 333996 at the time of award.

A-2. This will be a 5 year Firm-Fixed Price (FFP) Maintenance and Overhaul (M&O) Indefinite Delivery Indefinite Quantity (IDIQ) contract pursuant to Federal Acquisition Regulation (FAR) 52.216-22 using Sealed Bidding procedures under FAR Part 14.

A-3. The Motor, Hydraulic Unit is not a Critical Safety Item (CSI). There is an adequate Depot Maintenance Work Requirement (DMWR): DMWR-

55-1650-399, Revision Date: 06/07/2013, No Change #.

A-4. No Government Furnished Material (GFM) other than the reparables will be provided.

A-5. Access to FedMall is not authorized.

A-6. The Government is only obligated to purchase the minimum quantity. Subject to the availability of funds, any quantities ordered will be priced at the unit price established for the ordering period in which they are ordered. Funds shall be obligated by issuance of delivery orders and not by the contract itself.

A-7. Shipping requirements will be provided in each individual delivery order.

A-8. The yearly estimated quantities listed herein do not commit the Government to ordering that or any quantity above the minimum quantity.

Ch-47 Chinook Noun: Motor, Hydraulic Unit

Input NSN & Part Number (P/N)_____________________________

NSN: 4320-01-114-2160

P/N: 145HS140-9

Output NSN & Part Number (P/N)______________________________

NSN: 4320-01-114-2160

P/N: 145HS140-9

Minimum quantity: 15

Maximum quantity: 498

The maximum quantity includes 83 reserved for Foreign Military Sales (FMS).

A-9. The minimum quantity set forth herein shall be obligated on the first delivery order, to be issued simultaneously with the award of the contract. Any additional quantities ordered will be priced at the Firm Fixed unit price in effect during the ordering period in which they are ordered.

A-10. The Contractor shall furnish reusable container NSN: 8100-00-254-5708, P/N: MS24347-5 in accordance with Attachment 0001 M&O

Packaging Requirements. The price for furnishing containers should be provided in Contract Line Item Number (CLIN) 0005AA.

Contractor must comply with MIL-STD-2073-1E w/change 4, DOD Standard Practice for Military Packaging and MIL-STD-129R, DOD Standard

Practice for Military Marking for Shipment and Storage. DOD packaging regulations, standards, and specifications may be obtained online at https://quicksearch.dla.mil/qsSearch.aspx and available to the public.

2 68

W58RGZ-22-B-0010

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

A-11. All ordering periods are in increments of 12 months from the date of award.

Ordering Periods:_________________

The first ordering period is from date of contract award through 365 days after contract (DACA).

The second ordering period is from 366 DACA through 730 DACA.

The third ordering period is from 731 DACA through 1096 DACA.

The fourth ordering period is from 1097 DACA through 1461 DACA.

The fifth ordering period is from 1462 DACA through 1826 DACA.

Please insert your Firm Fixed unit price for the 1st, 2nd, 3rd, 4th, and 5th year in the spaces provided under each CLIN/SubCLIN.

NOTE: The offeror's attention is called to the requirements for receipt of reparables, which follows:

A-12. An electronic copy of DD Form 1348-1A for all shipments of reparables shall be forwarded to 1) the email address in block 10 on page 1 of the basic contract/delivery order/modification and also to 2) usarmy.redstone.usamc.mbx.immc-smb-ammo@mail.mil. The DD Form

1348-1A shall annotate to which contract/delivery order the assets will be applied as reparables.

The DD Form 1348-1A guidance as follows:

A. Maintain any receipt documentation received from the depots

B. Upon receipt of material, fill in block 10 to indicate the quantity received and provide a signature and date on the DD Form 1348-1A.

Printed names, name/date stamps, and initials are not acceptable.

C. If a DD Form 1348-1A is not received, a 1348-1A must be created with the corresponding receipt information to contain the following:

I. Unit of issue and quantity - (Positions 23-29)

II. Document Number - (Positions 30-44)

III. NSN - (Positions 8-22)

IV. Condition Code - (Position 71)

V. Unit Price - (Positions 74-80)

VI. Total Price - (Block 1)

VII. Actual quantity received - (Block 10)

VIII. Nomenclature - (Block 17)

IX. Signature and date - (Blocks 22 AND 23)

D. Completed 1348-1A should be sent to the following mailbox upon receipt of material:

usarmy.redstone.usamc.mbx.immc-smb-ammo@army.mil

An example of a 1348-1A filled out correctly is attached (See attachment 0002).

A-13. When applicable, the contractor is reminded to complete the FMS customer DA Form 2410 (component removal and repair overhaul record), submitted with the item for repair, in accordance with DA Pamphlet 738-751 and TB 1-1500-341-01. Upon completion of repair, if authorized, the contractor is reminded to fill out DA Form 2410 and return it to the FMS customer with the repaired asset(s), along with the FMS customer version of the DA Form 2410.

A-14. The following websites are provided for the purpose of obtaining/reviewing various DA pamphlets and Army regulations and technical manuals/bulletins:

https://armypubs.army.mil/ - Technical Manuals and Bulletins https://quicksearch.dla.mil/qsSearch.aspx - DA Pamphlets and Army Regulations

A-15. The Government intends to award only one contract as a result of this IFB.

A-16. Complete the following contractor point of contact information:

3 68

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

Name: ________________________________

Telephone number: ____________________

Fax number: __________________________

E-mail address: ______________________

A-17. Technical data can only be distributed to contractors who have a current DD 2345, Militarily Critical Technical Data Agreement on file with Defense Logistics Information Service (DLIS). Technical Data that are export-controlled must be marked with an export control warning notice. This statement identifies technical data which the DOD will withhold from public release using authority in 10 U.S.C.

Section-130. The Government's right to use, modify, reproduce, release, perform, display, or disclose such technical data are restricted for the contractor/its subsidiaries/or sub-contractors at every level. Any reproduction of technical data or portions thereof marked with these legends must also reproduce these legends on such technical data. Contractors wanting to obtain access to the unclassified technical data drawings must have Joint Certification Program (JCP) certification. Instructions for obtaining JCP certification can be found at:

https://public.logisticsinformationservice.dla.mil/publichome/jcp/default.aspx

DMWR and associated Maintenance and Engineering Orders (MEO) can be obtained by contacting the AMCOM publications office via email to

Edward McConnell at edward.n.mcconnell1.civ@army.mil and James Tietjen at james.h.tietjen.ctr@army.mil. Please notify the Contract

Specialist, Susan Bryan, at susan.m.bryan.civ@army.mil when this request is made.

Solicitation period will not be extended as a result of late requests for technical data.

A-18. The contractor shall comply with the Total Asset Visibility - contractor (TAV-c) reporting instructions IAW Attachment 0003 -

Contractor Repair TAV-C Requirements.

*** END OF NARRATIVE A0001 ***

4 68

PIIN/SIIN

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

SECTION B - SUPPLIES OR SERVICES AND PRICES/COSTS

0001 PVA

0001AA PRODUCT VERIFICATION AUDIT (PVA) $ ________________________________ __________________

SERVICE REQUESTED: PVA

CLIN CONTRACT TYPE:

Firm Fixed Price

This CLIN represents the Product Verification Audit

(PVA) for the Motor, Hydraulic Unit, Output NSN: 4320-

01-114-2160, as shown in CLINs 0002AA and 0003AA.

This is a Firm Fixed Price CLIN.

Offeror is required to fill in a proposed firm fixed unit price for the PVA:

PVA shall be in accordance with The "Product

Verification Audit (PVA) Statement of Work".

PVA shall be conducted within 90 days after receipt of reparables. The Contractor shall prepare 3 assets for PVA. The Contractor is required to notify the

Government Quality Office for scheduling of the PVA by email to the following address:

usarmy.redstone.devcom-avmc.mbx.amr-mq-contracts@army.mil

With copy emailed to the Contract Specialist at:

susan.m.bryan.civ@army.mil

The Contractor shall prepare and forward, through the cognizant Government Quality Element, finalized audit reports within 10 working days after completion of the PVA to the email address above.

NOTE: A copy of the cover letter for the report shall be e-mailed to the Contract Specialist at:

susan.m.bryan.civ@army.mil

PVA requires approval prior to Government acceptance of contract deliverable assets.

Failure to pass the PVA may lead to Termination for____________________________________________________

Default of the contract.________________________

Payment Instructions: The Contractor will be paid for_____________________ the PVA by utilizing the Wide Area Work Flow (WAWF) site. The Contractor must enter code W58H0Z when

5 68

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

submitting the PVA invoice, making it to the attention of CHarles R. Miller. The Contracting

Officer will approve the PVA invoice.

(End of narrative C001)

Inspection and Acceptance _________________________

INSPECTION: Destination ACCEPTANCE: Destination

Deliveries or Performance _________________________

0002 MOTOR, HYDRAULIC UNIT

NSN: 4320-01-114-2160

Mfr CAGE: 00000

Mfr Part Number: 145HS140-9

Estimated yearly quantities for CLIN 0002AA are:

Ordering Period 1: 15 each minimum qty

Ordering Period 2: 100 each estimated qty

Ordering Period 3: 100 each estimated qty

Ordering Period 4: 100 each estimated qty

Ordering Period 5: 100 each estimated qty

Funds for the ordering period 1 quantity set forth herein shall be obligated on the first delivery order, to be issued simultaneously with the award of the firm fixed price contract.

(End of narrative A001)

0002AA OVERHAUL OF MOTOR, HYDRAULIC UNIT (US QTY) $ $ __________________________________________ ______________ __________________

COMMODITY NAME: MOTOR, HYDRAULIC UNIT

CLIN CONTRACT TYPE:

Firm Fixed Price

SYSTEM: CH 47 CHINOOK

INPUT NSN: 4320-01-114-2160

INPUT P/N: 145HS140-9

OUTPUT NSN: 4320-01-114-2160

OUTPUT P/N: 145HS140-9

Overhaul shall be in accordance with Section C entitled 'Statement of Work'.

6 68

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

This Firm Fixed Price (FFP) CLIN includes all mandatory and nonmandatory parts, labor charges, preservation, packaging, packing, marking, and data items necessary to return the unit, to a serviceable condition, as stated in section C, Statement of Work.

Offeror is required to fill in proposed firm fixed unit price: US Qty 415 __________

Ordering Period 1-Unit Price $_________ EST Qty 15 ea

Ordering Period 2-Unit Price $_________ EST Qty 100 ea

Ordering Period 3-Unit Price $_________ EST Qty 100 ea

Ordering Period 4-Unit Price $_________ EST Qty 100 ea

Ordering Period 5-Unit Price $_________ EST Qty 100 ea

INDIVIDUAL DELIVERY ORDERS WILL BE ISSUED FOR THIS

CLIN.

(End of narrative C001)

Packaging and Marking _____________________

PACKAGING/PACKING/SPECIFICATIONS:

IAW MIL-STD-2073-1R W/CHANGE 4 & MIL-STD-129R

UNIT PACK: 001 INTERMEDIATE PACK: 000

LEVEL PRESERVATION: Military

LEVEL PACKING: A

For Packaging Instructions refer to Section J

Attachment 0001, M&O Packaging Requirements.

Contractor must comply with MIL-STD-2073-1E w/change 4, DOD Standard Practice for Military

Packaging and MIL-STD-129R, DOD Standard

Practice for Military Marking for Shipment and

Storage, notwithstanding that the Packaging

Instructions in Section J, Attachment 0001 references merely 2073-1 and Mil-STD-129, with no reference to the latest versions.

(End of narrative D001)

Inspection and Acceptance _________________________

INSPECTION: Origin ACCEPTANCE: Origin

Deliveries or Performance _________________________

FOB POINT: Origin

7 68

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

SHIP TO:

Refer to the Narratives entitled "Delivery Schedule" and "Delivery of Additional Quantities" in section F for the Government's Required Delivery Schedule.

(End of narrative F001)

0003 MOTOR, HYDRAULIC UNIT

NSN: 4320-01-114-2160

Mfr CAGE: 00000

Mfr Part Number: 145HS140-9

Estimated yearly quantities for CLIN 0003AA are:

Ordering Period 1: 0 each minimum qty

Ordering Period 2: 21 each estimated qty

Ordering Period 3: 21 each estimated qty

Ordering Period 4: 21 each estimated qty

Ordering Period 5: 20 each estimated qty

Funds for the ordering period 1 quantity set forth herein shall be obligated on the first delivery order, to be issued simultaneously with the award of the firm fixed price contract.

(End of narrative A001)

0003AA OVERHAUL OF MOTOR, HYDRAULIC UNIT (FMS QTY) $ $ ___________________________________________ ______________ __________________

COMMODITY NAME: MOTOR, HYDRAULIC UNIT

CLIN CONTRACT TYPE:

Firm Fixed Price

SYSTEM: CH 47 CHINOOK

INPUT NSN: 4320-01-114-2160

INPUT P/N: 145HS140-9

OUTPUT NSN: 4320-01-114-2160

OUTPUT P/N: 145HS140-9

Overhaul shall be in accordance with Section C entitled 'Statement of Work'.

This Firm Fixed Price (FFP) CLIN includes all mandatory and nonmandatory parts, labor charges, preservation, packaging, packing, marking, and data items necessary to return the unit, to a serviceable condition, as stated in section C, Statement of Work.

8 68

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

Offeror is required to fill in proposed firm fixed unit price: FMS Qty 83 __________

Ordering Period 1-Unit Price $_________ EST Qty 0 ea

Ordering Period 2-Unit Price $_________ EST Qty 21 ea

Ordering Period 3-Unit Price $_________ EST Qty 21 ea

Ordering Period 4-Unit Price $_________ EST Qty 21 ea

Ordering Period 5-Unit Price $_________ EST Qty 20 ea

INDIVIDUAL DELIVERY ORDERS WILL BE ISSUED FOR THIS

CLIN.

(End of narrative C001)

Packaging and Marking _____________________

PACKAGING/PACKING/SPECIFICATIONS:

IAW MIL-STD-2073-1R W/CHANGE 4 & MIL-STD-129R

UNIT PACK: 001 INTERMEDIATE PACK: 000

LEVEL PRESERVATION: Military

LEVEL PACKING: A

For Packaging Instructions refer to Section J

Attachment 0001, M&O Packaging Requirements.

Contractor must comply with MIL-STD-2073-1E w/change 4, DOD Standard Practice for Military

Packaging and MIL-STD-129R, DOD Standard

Practice for Military Marking for Shipment and

Storage, notwithstanding that the Packaging

Instructions in Section J, Attachment 0001 references merely 2073-1 and Mil-STD-129, with no reference to the latest versions.

(End of narrative D001)

Inspection and Acceptance _________________________

INSPECTION: Origin ACCEPTANCE: Origin

Deliveries or Performance _________________________

FOB POINT: Origin

SHIP TO:

Refer to the Narratives entitled "Delivery Schedule" and "Delivery of Additional Quantities" in section F for the Government's Required Delivery Schedule.

(End of narrative F001)

9 68

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

0004 SCRAP

0004AA BEYOND ECONOMIC REPAIR $ ______________________ __________________

SERVICE REQUESTED: SCRAP

CLIN CONTRACT TYPE:

Firm Fixed Price

This CLIN is for assets which are Beyond

Economical Repair (i.e., scrap) from CLINs

0002AA and 0003AA.

Offeror is required to fill in a proposed firm fixed unit price for each ordering period:

Ordering Period 1 - Unit Price $____________

EACH EST Qty 1 each

Ordering Period 2 - Unit Price $____________

EACH EST Qty 1 each

Ordering Period 3 - Unit Price $____________

EACH EST Qty 1 each

Ordering Period 4 - Unit Price $____________

EACH EST Qty 1 each

Ordering Period 5 - Unit Price $____________

EACH EST Qty 1 each

(End of narrative B001)

Scrapped assets from CLINs 0002AA and 0003AA shall be in accordance with Section C.

As applicable on delivery orders issued, units determined to be scrapped in accordance with the

SOW/Government Specifications in Section C shall be reflected as an increase in CLIN 0004AA with a corresponding decrease in quantity and funds in CLINs 0002AA or 0003AA as applicable.

The Government may, at its discretion, replace any items scrapped by input of additional assets and said scrap quantities will not count as part of the total maximum quantity.

Scrap requires authorization by the PCO via formal modification. In no event shall the contractor scrap an item prior to receiving a contractual modification for a unit.

(End of narrative C001)

10 68

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

Inspection and Acceptance _________________________

INSPECTION: Origin ACCEPTANCE: Origin

Deliveries or Performance _________________________

0005 SHIPPING CONTAINERS

0005AA CONTRACTOR FURNISHED CONTAINERS $ _______________________________ __________________

SERVICE REQUESTED: SHIPPING CONTAINERS

Contractor shall furnish containers:

NSN: 8100-00-254-5708, P/N: MS24347-5

These prices apply to US and FMS reusable containers.

Offeror is required to fill in proposed firm-fixed unit price for all 5 ordering periods:

Ordering Period 1 $________ EST Qty 1 ea ________

Ordering Period 2 $________ EST Qty 1 ea ________

Ordering Period 3 $________ EST Qty 1 ea ________

Ordering Period 4 $________ EST Qty 1 ea ________

Ordering Period 5 $________ EST Qty 1 ea ________

The contractor shall provide containers IAW

Attachment 0001, M&O Packaging Requirements and

Section C, Description/Specifications/Work

Statement.

The Government cannot determine, at the time of contract award, how many of the assets to be repaired will be received by the contractor in unserviceable containers or received without containers.

The contractor,IAW Section C, Statement of Work, shall submit a Report of Discrepancy (ROD), SF Form

364, through its Government DCMA QAR for verification within 7 working days to the address shown on CDRL A004. Assets received in unserviceable containers or without a container require approval by the PCO prior to the purchase of a servicable container.

Contractor must comply with MIL-STD-2073-1E w/change 4, DOD Standard Practice for Military

Packaging and MIL STD 129R, DOD Standard Practice for Military Marking for Shipment and Storage, notwithstanding that the Packaging Instructions in

11 68

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

Section J, Attachment 0001 references merely 2073-1 and MIL-STD-129, with no reference to the latest versions.

DOD packaging, regulations, standards, and specifications may be obtained online at https://quicksearch.dla.mil/qsSearch.aspx and available to the public.

This CLIN covers containers for CLINs 0002AA and

0003AA.

(End of narrative C001)

Inspection and Acceptance _________________________

INSPECTION: Origin ACCEPTANCE: Origin

Deliveries or Performance _________________________

0006 CONTRACT DATA REQUIREMENTS LIST (CDRL) ______________________________________

A001 TECHNICAL REPORT - STUDY/SERVICES - DD FORM ___________________________________________

1348-1A $ ** NSP ** _______ __________________

SERVICE REQUESTED: EXHIBIT A / DI-MISC-80508B

Deliveries or Performance _________________________

A002 CONTRACT DEPOT MAINTENANCE (CDM) MONTHLY ________________________________________

PRODUCTION REPORT $ ** NSP ** _________________ __________________

SERVICE REQUESTED: EXHIBIT B / DI-PSSS-81995A

Deliveries or Performance _________________________

A003 QUALITY DEFICIENCY REPORT $ ** NSP ** _________________________ __________________

SERVICE REQUESTED: EXHIBIT C / DI-QCIC-80736

12 68

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

Deliveries or Performance _________________________

A004 REPORT OF SHIPPING (ITEM) AND PACKAGING _______________________________________

DISCREPANCY $ ** NSP ** ___________ __________________

SERVICE REQUESTED: EXHIBIT D / DI-MGMT-80503

Deliveries or Performance _________________________

A005 GOVERNMENT PROPERTY (GP) INVENTORY REPORT $ ** NSP ** _________________________________________ __________________

SERVICE REQUESTED: EXHIBIT E / DI-MGMT-80441D

Deliveries or Performance _________________________

13 68

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

SECTION C - DESCRIPTION/SPECIFICATIONS/WORK STATEMENT

Statement of Work (Competitive) for

NSN: 4320-01-114-2160

PRID: M497-02 PART NUMBER: 145HS140-9 STATUS: R

a. The Contractor, as an independent Contractor, and not as an agent or employee of the Government, shall furnish all services, facilities, labor, parts, materials, equipment, tools, and data (other than Government Furnished Property), necessary to accomplish the inspection and overhaul for MOTOR, HYDRAULIC UNIT that is required to return the items as specified by Section B, to condition code A as defined by Army Regulation 725-50. The input/output configuration shall be as defined in Section B herein. Upon completion of the overhaul, as applicable, the items shall be packaged as defined in each individual delivery order of the contract and shipped to the destination(s) specified in each individual delivery order.

b. Prior to commencement of overhaul, the Contractor shall disassemble and inspect the item to the extent necessary to determine if the item is physically unrepairable or has suffered abnormal or catastrophic damage. If the latter condition exists, the Contractor shall notify the Procuring Contracting Officer (PCO) through the cognizant Administrative Contracting Officer (ACO) and shall stop work on the item(s) until given further instructions or disposition of the item(s) by the PCO.

c. In the event the PCO determines that certain items should be scrapped, the contractor shall scrap such items at the fixed unit price in Section B hereof and make disposition in accordance with (IAW) the Contractor's approved Government property procedures. Such scrapped items shall count toward the quantities ordered hereunder.

d. Overhaul shall be accomplished IAW Depot Maintenance Work Requirement (DMWR)

DMWR-55-1650-399

REV 6/7/2013

Distribution Level: C

POWER TRANSFER UNIT, HYDRAULIC MOTOR/PUMP, P/N 569774 (145HS140-8) PTU, NSN 1650-01-114-2177;

P/N 569775 (145HS140-9) MOTOR, NSN 1650-01-114-2160; AND P/N 569776 (145HS140-10) PUMP, NSN 4320-01-118-4428

e. Critical Safety Item: N/A

f. Upon receipt of the reparables, containers shall be reviewed for serviceability. Containers shall be considered serviceable unless one or more of the following conditions exist: (1) containers are structurally damaged to include functional damage to the suspension system, cracks or holes to the container hull, hull deformity to the extent the container cannot be closed (or sealed where required), or dents that will interfere with the item envelope; (2) corrosion has progressed to the point where fit, function or the life of the container is affected. Items received without containers or containers determined to be unserviceable shall be processed IAW the

Contractor's locally approved Government Property procedures. Components received improperly packaged, damaged with corrosion/ deterioration or those with shipping discrepancies shall be reported IAW DI-MGMT-80503.

g. Any Contractor paint facility which is used in the performance of this contract shall comply with the Environmental Protection Agency and Occupational Safety and Health Administration standards for painting as implemented by TM 1-1500-345-23, CH 1, Painting and Marking of Army Aircraft.

h. Data and reports shall be submitted IAW the Contract Data Requirements List, DD Form 1423, Exhibit A. Data shall be packaged, packed and marked as necessary to assure safe delivery to the addresses indicated on the DD Forms(s) 1423.

i. Product Verification Audit (PVA): The Contractor shall conduct the PVA as specified in Section E, PVA Contract Requirements, of the solicitation/contract.

j. The Army Maintenance Management System - Aviation (TAMMS-A): The Contractor shall complete the forms and records as specified in DA

PAM 738-751.

k. Serial Number Report Requirement (SNRR): N/A

l. The items the Contractor shall overhaul are identified below:

Input NSN P/N

4320-01-114-2160 145HS140-9

Output NSN P/N

4320-01-114-2160 145HS140-9

m. The overhaul planned quantity for 5 years is minimum 15, maximum 498. Input will be 30 days after receipt of order (ARO). Output shall be as specified in the solicitation/contract schedule. Serviceable assets shall be returned to PLANT 7000, W25G1W, RIC BY6.

14 68

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

US Quantity ___________

(1) 1st year qty 15 (4) 4th year qty 100

(2) 2nd year qty 100 (5) 5th year qty 100

(3) 3rd year qty 100

FMS Quantity ____________

(1) 1st year qty 0 (4) 4th year qty 21

(2) 2nd year qty 21 (5) 5th year qty 20

(3) 3rd year qty 21

n. Inventory Transactions - The contractor shall prepare the following reports:

1. The contractor shall prepare a Contract Depot Maintenance Production Report IAW DI-PSSS-81995.

2. The contractor shall complete and maintain the DD Form 1348-1A receipt for repairables on all shipments IAW DI-MISC-80508 and

DD Form 1348-1A. The contractor shall complete the DD Form 1348-1A, Block 10 (indicates the quantity received), along with Block

22 (signature), and Block 23 (date). Printed names, name/date stamps, and initials shall not be acceptable. If a DD Form 1348-1A is not delivered with the shipment, a DD Form 1348-1A is located at:

http://www.dtic.mil/whs/directives/forms/eforms/dd13481a.pdf

The contractor shall prepare this form to include the following corresponding receipt information:

A. Document Number - (Positions 30-44)

B. National Stock Number (NSN) - (Positions 8-22)

C. Condition Code - (Position 71)

D. Unit Price - (Positions 74-80)

E. Total Price - (Block 1)

F. Actual Quantity Received - (Block 10)

G. Nomenclature - (Block 17)

H. Signature and Date - (Blocks 22 and 23)

If there are any questions with the above information please contact: usarmy.redstone.usamc.mbx.immc-smb-ammo@mail.mil

3. The contractor shall perform a 100% physical inventory of all Army Material on an annual basis.

The contractor shall perform special inventory requests the same day as a government request is received from the responsible inventory manager.

The contractor shall prepare a physical inventory report IAW DI-MGMT-80441D, CDRL A005. Along with this report, an inventory memorandum to include count type, date performed, total count of lines, and signature shall be provided. The contractor shall ensure that the total lines inventoried correlates with lines present on count sheets.

If the physical inventory shows less than 97% of general supplies or less than 98% of missiles/ammunition are accounted for, the accountable Property Officer, Item Manager, or Contracting Officer is authorized to schedule a 100% physical inventory by a government official.

4. The contractor shall comply with the Total Asset Visibility - Contractor (TAV-C) reporting instructions IAW Attachment 0003

"Contractor Repair TAV-C Requirements".

o. Foreign Military Sales (FMS): These total requirements meet or exceed the requirements for the Security Assistance Management

Directorate (SAMD) per the Army Contracting Command (ACC-R) IAW SAMD and AMCOM Logistics Center (ALC) Memorandum of Understanding (MOU) document dated 4 December 2004. The ALC is responsible for conducting Weapons System Team (WST) reviews of SAMD's FMS Aviation hardware, allowing 20% over the Army's maximum quantity during the life of the contract specifically for FMS requirements. SAMD and ALC will negotiate provisions for FMS critical items that exceed the standard 20% on case-by-case basis.

p. The replacement cost is $8,605.00 for the subject item. When price of overhaul exceeds $5,593.25, a review of disposition will be made by AMCOM.

q. The Government reserves the right to replace any items scrapped.

r. Overhaul Repair Report: N/A

s. Quality Deficiency Report: The Contractor shall prepare the Quality Deficiency Report IAW DI-QCIC-80736.

t. Supplier Interface and Oversight: N/A

15 68

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

u. Shipping Containers NSN: 8100-00-254-5708, P/N: MS24347-5 shall be utilized. If containers are not reparable or if assets are not delivered in the approved containers, the containers shall be Contractor Furnished Materiel. Shipment: The method of shipment must use a procedure so that the package can be tracked in case the shipment is not received by AMCOM.

*** END OF NARRATIVE C0001 ***

16 68

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

SECTION E - INSPECTION AND ACCEPTANCE

This document incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at these addresses:

For FAR clauses: https://www.acquisition.gov/

For DFARS clauses: https://www.acq.osd.mil/dpap/dars/dfarspgi/current/index.html

If the clause requires additional or unique information, then that information is provided immediately after the clause title.

Regulatory Cite Title Date Regulatory Cite Title Date _______________ ______________________________________________________________________ ____________ _______________ ______________________________________________________________________ ____________

E-1 52.246-2 INSPECTION OF SUPPLIES--FIXED-PRICE AUG/1996

E-2 52.246-4 INSPECTION OF SERVICES--FIXED-PRICE AUG/1996

E-3 52.246-15 CERTIFICATE OF CONFORMANCE APR/1984

E-4 52.246-16 RESPONSIBILITY FOR SUPPLIES APR/1984

E-5 52.246-11 HIGHER-LEVEL CONTRACT QUALITY REQUIREMENT DEC/2014

(a) The contractor shall comply with the higher-level quality standard(s) listed below.

ISO 9001:2000 OR EQUIVALENT

(b) The contractor shall include applicable requirements of the higher-level quality standard(s) listed in paragraph (a) of this clause and the requirement to flow down such standards, as applicable, to lower-tier subcontracts in--

(1) Any subcontract for critical and complex items (see 46.203(b) and (c)); or

(2) When the technical requirements of a subcontract require--

(i) Control of such things as design, work operations, in-process control, testing and inspection; or

(ii) Attention to such factors as organization, planning, work instructions, documentation control, and advanced metrology.

(End of clause)

PRODUCT VERIFICATION AUDIT (PVA) CONTRACT REQUIREMENTS______________________________________________________

Purpose: This PVA requirement establishes/assigns responsibilities for insertion of PVA procedures into overhaul work directives, maintenance data packages, and contract documents along with procedures and instructions to be applied in performing PVAs during overhaul, maintenance, modification kit installation, rework, remanufacture, manufacturing, and new procurement contracts. The PVA candidate(s) are used to evaluate that the contractor processes and procedures are adequate to ensure component integrity.

(A) The Contractor shall perform and present for acceptance THREE units as specified in this contract. This clause does not supersede instructions contained in depot overhaul work requirements, commercial overhaul manuals, new manufacture technical requirements or other applicable documents. It does not relieve the contractor from maintaining a quality system that will assure items conform to contractual requirements. Contractors may request to delay scheduled PVAs in frequency or waive PVA requirements of selected items in cases where accumulated objective evidence indicates that a consistent quality item is being delivered. PVA actions will be based on the overall performance history, failure impact, supply impact, length of program, and nonscheduled PVAs accomplished by the Systems Readiness

Directorate (SRD). Like or similar items may be grouped for these purposes provided concurrence is obtained from SRD Quality Management

Division. The contractor may be directed by the Procuring Contracting Officer (PCO) to increase or decrease the scope of a PVA pursuant to the "Changes" clause of the contract for non-commercial items. If however this procurement is for a commercial item, the contractor and the Contracting Officer (CO) will need to enter into a bilateral contract modification to increase or decrease the scope of a PVA.

(B) The Contractor shall,

(1) With the concurrence of SRD Quality Management Division (QMD), schedule and perform PVA as required by the terms of the contract or as otherwise required.

(2) Notify PCO with information copy to the SRD QMD, ATTN, "usarmy.redstone.devcom-avmc.mbx.qs-contracts@army.mil" of the date the PVA candidates will be available. Notification shall be provided at least 20 working days prior to the selected date if facilities are within the Continental United States. If facilities are outside the Continental United States, notification shall be provided at least 95 working days prior to the selected date to allow sufficient time for travelers to gain theater clearance.

(3) Provide technical personnel tooling, measuring and test equipment, work area, forms, and clerical assistance, as required, to perform the PVA. If test cell or other specialized equipment is required; notification of readiness for PVA shall include the availability of these.

17 68

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

(C) The PVA candidate will be selected by the SRD PVA Team Chairman at random from the three (3) tendered candidates for acceptance to the Government. For reoccurring audits, if any, the audit candidate will be selected by the PVA Team Chairman from all completed items currently available.

(1) Alternate Procedure. Normally, three assets are required to be completed at time of PVA. If in the PVA Team Chairman's judgment it is in the best interest of the Government, an alternative approach may be taken due to circumstances such as shortage of overhaul assets, shortage of replacement parts, time constraints, or other considerations. At the PVA

Team Chairman's discretion, only one PVA candidate may be required to be completed while the other two assets can be in various stages of overhaul as agreed upon (prior to the beginning of the PVA) between the PVA Team Chairman and the facility to be audited. For instance, one asset could be disassembled and ready for Overhaul Inspection

Procedures, while the other may be prepared for a critical process such as acceptance testing. (This approach is particularly helpful if the critical process is performed by a subcontractor.) For reoccurring audits, if any, the audit candidate will be selected by the PVA Team Chairman from all completed items currently available.

(D) The item selected for PVA will be inspected for adherence to preservation, packaging, and marking requirements prior to removal from the shipping container. A visual inspection and functional test will be performed prior to disassembly.

(E) The PVA Team will review the shop travelers, production processes, procedures, tooling, and, equipment used to maintain, overhaul, repair, or manufacture the item being audited for adequacy and conformance to the contractual requirements. The PVA will include verification through objective evidence that all of the inspection, testing, measuring and diagnostic equipment used in the inspection/test of the PVA candidate are maintained in accordance with applicable calibration standards.

(F) Disassembly for overhauled items will be performed in an area accessible only to audit personnel. Normally, audit participation will be limited to specified production and quality assurance personnel of the contractor activity, the cognizant government Quality

Assurance Representative (QAR), and the SRD PVA Team Chairman and team personnel.

(G) Visual inspection, dimensional checks (such as backlash, end clearance, running clearance, etc.) and nondestructive testing are accomplished during and after disassembly IAW applicable technical directives. Findings are recorded for comparison with historical data and conformance evaluation. A 100% inspection (or as set forth in relevant specifications) of all physical characteristics, to include but not limited to any dimensions, certifications for materials, processes and/or procedures, as well as any other requirements which may be set forth by other applicable specifications, or in any procurement packages, technical drawings. Depot

Maintenance Work Requirements (DMWRs), Maintenance Engineering Orders (MEOs), and/or any other special/functional testing as set forth in this contract.

(H) Applicable accessories and components will be functionally tested and inspected to contractual/work specifications. The PVA team will review subcontractor certifications for testing and inspections. At the request of the PVA Team Chairman, processes (such as

Shot peening, heat treating, etc.) performed by subcontractors may also be audited. Contractor shall be able to demonstrate that all testing/ inspection procedures, and acceptance methods are documented in the appropriate area of the overhaul documents, and are approved and controlled by management.

(I) The PVA item shall be reassembled and functionally tested IAW applicable specifications and made ready for government acceptance including preservation, packaging, marking, and update of historical records and all applicable documentation.

(J) Conduct of the PVA will be planned in a manner that adequately allows examination/audit of all procedures involved. Each step in the process shall be analyzed to determine compliance to specifications. It may not be logical or possible, due to time constraints, to track the same item throughout the PVA; therefore, at the SRD PVA Team Chairman's discretion, examination of representative assemblies any may be used as evidence of compliance to specification requirements. The SRD PVA Team Chairman will determine the scope and detail of the PVA process. The SRD PVA Team Chairman may delegate follow-up actions to the DCMA

QAR, when it is determined to be prudent to the PVA.

(K) During the course of the PVA, the PVA Team Chairman may request progress meetings to provide status to the contractor.

After the PVA is completed, the SRD PVA Team Chairman will conduct an exit critique attended by all concerned contractor personnel and the cognizant DCMA QAR and PM Representative. The context of the audit findings and corrective actions will be discussed and any disputes will be resolved. Findings, classifications, and corrective actions will be discussed and determinations made as to cause of defect established (i.e. workmanship, tooling, technical requirements, etc.). The contractor's management personnel shall take immediate action to correct and preclude recurrence of all defects attributable to failure to ensure compliance with requirements.

(L) All defects will be recorded on a SRD PVA Audit Finding Record by the PVA Team. The PVA Team Chairman will provide copies of each finding to the contractor quality assurance element and the cognizant DCMA QAR and PM Representative. This will allow immediate actions to begin in the resolution of the defect. Corrective actions, as well as actions taken to prevent recurrence, shall also be documented on this form by the contractor. The form shall be signed, as a minimum, by the contractor quality manager or designated representative and the SRD PVA Team Chairman. Further actions outlined below pertain to specific actions required by the contractor depending on the classification of the defects:

18 68

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

(1) Observation: In the event an observation is discovered, the contractor is not required to provide a written response, but it is encouraged to do so.

(2) Minor: In the event a minor defect is discovered, the following actions shall be taken:

(a) The contractor shall isolate the cause of the defect and initiate corrective actions.

(b) All minor defects shall require a written response addressing corrective actions taken and actions taken to prevent recurrence.

(c) In the event a minor defect is a recurrant deficiency, regardless of weapon system or date when original discrepancy was noted, it will be written into the report as a minor defect, but the corrective actions required below for a major defect will apply.

(3) Major: In the event a major defect is discovered, the following actions shall be taken:

(a) The contractor shall halt any work in progress at the responsible station until corrective action is acceptable to the

PVA Chairman.

(b) The contractor shall provide the DCMA QAR information reflecting the total quantity shipped, if any, and to what destination pertaining to any item that could contain the identified defect.

(c) The contractor shall determine impact of the defect on products previously delivered under this contract, if any, and initiate corrective action to address those units at no additional cost to the US Government.

(d) The contractor shall isolate the cause of the defect and initiate corrective actions. All findings shall require an in-depth written response outlining corrective actions to prevent recurrence.

(e) The contractor shall review/revise work documents for the specified operation responsible for the defect to ascertain that they are complete, adequate, and sufficiently defined to assure that, if followed and completed by both production, maintenance and inspection personnel, they will provide objective evidence of a quality operation.

(f) The contractor shall assure the cognizant DCMA QAR and the SRD PVA Team Chairman that positive, effective, corrective action has been initiated that will prevent recurrence of the cited defect. This assurance can be verbal at first, however, a written report from the contractor quality element containing all corrective actions completed and actions taken to prevent recurrence shall be provided to the DCMA QAR and the SRD PVA Team Chairman within 24 hours after the verbal response.

(4) Critical: In the event a critical defect is discovered, the following actions shall be taken:

(a) All actions outlined in paragraph 3 above shall be completed.

(b) Upon request, the contractor shall provide the SRD technical information necessary for the issuance of a Safety of Flight

Message or Aviation Safety Action Message to the field (if necessary).

(c) Government acceptance/release of product will cease immediately until corrective actions are acceptable to the contracting officer.

NOTE: Systemic quality assurance process discrepancies that affect the outcome of product(s)outside the scope of the PVA will require the cognizant DCMA QAR to issue a Corrective Action Request.

(M) Finding Definitions:

Minor Finding: A defect or a departure from established processes or standards that may result in failure or reduced usability of the_____________ product, or a process noncompliance that holds the potential of causing a defect in the future.

Major Finding: A defect, other than critical, that will likely result in failure, or reduce the usability of the product for its_____________ intended purpose.

Critical Finding: A defect that would result in hazardous or unsafe conditions for individuals using, maintaining, or depending upon the________________ product or a defect likely to prohibit the performance of a major end item or major part thereof. This classification requires immediate cessation of Government acceptance/release of product until corrective actions are acceptable to the contracting officer.

Observation: A condition or circumstance that is noted during the PVA that does not currently meet the aforementioned defect criteria.___________

This category may also be used as suggestions for continuous improvement.

19 68

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

(N) Upon completion of the disassembly and/or testing portion of the selected PVA candidate, without finding any critical or major defects, the other two completed candidates will be released as PVA candidates. In the event that a critical or major defect is found in the audit candidate, the contractor shall satisfy to the PVA Team Chairman that such a defect does not exist in the other 2 PVA candidates prior to acceptance, and an effective corrective action has been initiated to preclude re-occurrence of the defect.

(O) If there are failures during the PVA, the Contractor shall repeat any or all tests, per Government request. If deemed in the best interests of the government, contract termination may be initiated. Upon request for additional tests, the Contractor shall make any necessary changes, modifications, or repairs to the PVA item. All costs related to these tests are to be borne by the Contractor, including any and all costs for additional tests following disapproval. These actions must be coordinated with the cognizant DCMA QAR.

The Government shall take action within 10 working days. The Government reserves the right to require an equitable adjustment of the contract price for any extension of the delivery schedule, or for any additional costs to the Government related to these tests.

(P) The PVA unit is to be representative of the…