Attachment 0009 - M and O AED Requirements Data.pdf

12/13/2021

M497-02PRID 145HS140-9Part Number

4320-01-114-2160NSN CH-47System

MOTOR, HYDRAULIC UNITNomenclature

YAdequate DMWR Available?

DMWR-55-1650-399DMWR ID

06/07/2013DMWR Date

DMWR Chg #

YPre-Award Survey Recommended?

NCorrelation Performance Study Required ? YPVA Recommended?

Hydraulic Unit Motor P/N 145HS140-9 is a subassembly of Power Transfer Unit (Pump and Motor) assembly P/N 145HS140-8.

See DMWR 55-1650-399 paragraph 3-15 through 3-19 for inspection measurement procdures and equipment.

Diagnostic and non-destructive tests such as magnetic particle, flourescent penetrant, radiographic and ultrasonic inspections shall be in acccordance with referenced military specifications and ASTM E1444 and ASTM E1417 per DMWR 55-1650-399 paragraph 5-7.b.

The contractor Quality Assurance (QA) activity shall be responsible for ascertaining and certifying personnel skills, equipment and material to meet the requirements of the work to be accomplished. Unless otherwise specified in the contract or by the Procuring Activity (PA) or Commodity Manager (CM) representative, the contractor QA activity shall provide the PA/CM with statements or other evidence that specifications for such special processes as welding, nondestructive testing, plating and the like, have been complied with. Personnel performing magnetic particle and penetrant test shall be certified in accordance with AIA/NAS NAS 410 per DMWR 55-1650-399 paragraph 5-4.

TMDE shall be maintained and controlled in accordance with MIL-I-45607, ISO 10012, NCSL Z540.3, or AMCOM-R 702-7.

Calibration documents for all TMDE shall be traceable to the National Instutite of Standards and Technology (NIST).

See DMWR 55-1650-399 paragraphs 3-39 through 3-47 for motor testing requirements. Paragraphs 4-3 though 4-10 are applicable to the motor and pump assembly only.

Identify Any Special Processes, Test Procedures, and/or Instructions

NCritical Safety Item?

There are no emerging airworthiness issues, no issues related to ECPs affecting the CSI status, and no concerns over reliability/durability for the CH-47 Hydraulic Unit Motor of this review.

Special Airworthiness Considerations

FCDD-AMR-AM SUSTAINMENT HAS VERIFIED THROUGH THE ARISE CIM DATABASE ON 3 SEPTEMBER 2021 AND THE

PART IS NON-CSI AND NON-NST. JC

Other Requirements / Comments

If the item is not a CSI and no adequate DMWR is available, approved sources, if any, are listed by CAGE as follows:

NSpecial Post-Contract Award Requirements?

The Systems Readiness Directorate (SRD) Cargo Division has reviewed the subject request from an engineering and airworthiness perspective. Our research did not reveal any emerging airworthiness issues, new Engineering Change Proposals (ECPs) affecting Critical Safety Items (CSIs), and/or concerns over reliability, durability, etc. for the subject part.

Other Requirements / Comments (Part II)

The applicable DMWR contains detailed procedures regarding IUID requirements for this component. These procedures can be found in MEO(s) D2412, D2413, D2414.

Other Requirements / Comments (Part III)

NDoes QE-STD-2 Apply?

N

Additional CSI Requirements

CSI Contains CSI Replacement Parts? NEngineering Testing Required?

The solicitation/RFP shall require that all proposals/responses include a special tooling and test equipment section that addresses the contractor's plan to meet all government special tooling and test equipment requirements with either:

1. Physical possession of the required tools, 2. Confirmed requisitions for the required tools, 3. Confirmed arrangements for subcontracting the processes requiring the special tools, or 4. Specific plans describing their technical approach to develop equivalent tools.

RStatus

YTDPL?

Approved Date

M&O AED REQUIREMENTS DATA

Commerciality Determination

Commercial Item? N NBest Commercial Practice Acceptable?

12/13/2021

M497-02PRID 145HS140-9Part Number

4320-01-114-2160NSN CH-47System

D1188

D1255

D2412

D2413

D2414

DMWR 55-1650-399 Tables 2-1 and 2-2 for critical tools and test/inspection equipment

Critical Tools and Test and Inspection Equipment Requiring AED Approval for Substitutes

MEOs Required for Competitive Contract?

Special Post-Contract Award Requirements

FCDD-AMR-MS Quality Requirements Branch has verified the CSI/NST status through the ARISE CIM on 29 November 2021 and the part is still Non-CSI and Non-NST. There are no required changes.JC

Other Requirements / Comments (Part IV)

Other Requirements / Comments (Part V)

RStatus

Correlation Performance Study Requirements