TIQ-Attach_0002_(Hino_500_Belize)_19R0111.doc

DOC document 107 KB Posted

Attached to
HINO 500 4X4 PERSONNEL CARRIER TRUCKS
Solicitation number
W56HZV19R0111
Issued by

About this file

Technical Information Questionnaire (Attachment 0002)

View the file

Other files

File Type Posted
ExhibitA-Spares_Hino_500_(Belize_BH-VCC)_19R0111.xls XLS spreadsheet
Spec_ATTACH_0001_Hino_500_Truck-19R0111.doc DOC document
RFP_W56HZV19R0111-0001.pdf PDF
RFP_W56HZV19R0111.pdf PDF

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

Solicitation W56HZV-19-R-0111 Technical Information Questionnaire (TIQ) (Attachment 0002) May 29, 2019

FAILURE TO PROVIDE ALL OF THE INFORMATION REQUIRED BELOW MAY RENDER YOUR PROPOSAL INELIGIBLE FOR AWARD.

TRUCK, HINO 500 4X4 GENERAL TRANSPORT (PERSONNEL CARRIER)

The purpose of this questionnaire is to determine the suitability of your equipment to satisfy the requirements as stated in the specification. YOU MUST PROVIDE A RESPONSE TO ALL QUESTIONS. Failure to provide a response may result in the rejection of your proposal.

Units: The data provided in the response to the Technical Information Questionnaire (TIQ) shall be provided in English units, unless otherwise specified. Metric units may be provided if clearly defined and identified.

All written information shall be in English.

In addition to responding to the questions below, the offeror shall provide the following:

(a) Vehicle and major component commercial literature or specification sheets or any other information that would substantiate the information provided. If your commercial literature does not provide information relating to a particular question, you are required to provide a written explanation of your ability to meet that particular requirement with your written proposal. Where indicated herein, supporting documentation must be provided along with the location of that information stated (e.g. page number, paragraph, etc).

1) Supporting documentation is required for sections 1(d), 2(a)(1), and 9(c).

(b) Identification of all modifications and/or redesigns to the previously manufactured base vehicle necessary to meet the requirements of the specifications. The offeror shall also explain in detail the reasons for the modifications or redesigns.

Information Notes

(a) For components procured by the vehicle manufacturer, the component manufacturer’s name and model or part number shall be shown.

(b) Curb weight shall be weight of vehicle offered, completely equipped with coolant, fuel and lubricants, less the weight of a fully loaded vehicle and crew (driver and passengers) and personnel. Weight distribution empty shall be based on curb weight.

(c) Gross Vehicle Weight (GVW) shown shall include vehicle’s curb weight, weight of the crew (350 pounds), and weight of a fully loaded platform. The payload (10 personnel at 175 pounds per person) shall be assumed to be evenly distributed over the cargo space.

GENERAL INFORMATION REQUIRED

Personnel Responding to Questionnaire:

(a) Name:

(b) Job Title:

(c) Company Name:

(d) Telephone/Fax Numbers:

(e) E-mail address:

(f) Mailing address:

(g) Company Website:

Comments:

TRUCK, HINO 500 4X4 GENERAL TRANSPORT (PERSONNEL CARRIER)

1. CONFIGURATION

(a) Is the vehicle a 4x4 Hino 500 2 door truck with personnel carrier? FORMDROPDOWN

1) What is the vehicle model?

(b) Is the vehicle provided with a platform body configured for personnel carrying? FORMDROPDOWN

1) Platform body manufacturer

(c) Is the vehicle a 2018 model year or later, with no more than 200 miles on the odometer? FORMDROPDOWN

(d) SUPPORTING DOCUMENTATION REQUIRED: A brochure or specification sheet(s) listing all options provided with the 4x4 Hino 500 truck must be provided. State where this information is provided in your proposal (e.g. page number, paragraph, etc.)

Comments:

2. EQUIPMENT

(a) Is the vehicle equipped with all of the standard equipment typically found on a 4x4 Hino 500 2-door truck? FORMDROPDOWN

1) SUPPORTING DOCUMENTATION REQUIRED: A brochure or specification sheet(s) listing all standard equipment found on a 4x4 Hino 500 2-door truck must be provided. State where this information is provided in your proposal (e.g. page number, paragraph, etc.)

Comments:

3. DIMENSIONS (inches)

(a) Wheelbase:

Comments:

4. ENGINE

(a) Does the vehicle have the 6 cylinder diesel engine capable of operating on high sulfur content diesel fuel (5,000 ppm of ½%)? FORMDROPDOWN

(b) Is the vehicle provided with any emission control devices? FORMDROPDOWN if yes, list emission control devices

(c) What emissions standard does this vehicle meet?

Comments:

5. TRANSMISSION

(a) Type: FORMDROPDOWN

Comments:

6. STEERING

(a) Is the vehicle left-hand drive? FORMDROPDOWN

Comments:

7. COLOR

(a) Is the exterior color of the vehicle and personnel carrier OEM white or aftermarket flat dark olive green? FORMDROPDOWN

1) Who will be re-painting the truck the aftermarket flat dark olive green color?

Comments:

8. TOWING

(a) Is the vehicle equipped with a trailer hitch receiver and combination pintle hook with 2-5/16 inch ball? FORMDROPDOWN , if yes:

1) Combination Pintle Manufacturer:

Comments:

9. PERSONNEL CARRIER

(a) Platform body load rating (capacity)

(b) Length

(c) SUPPORTING DOCUMENTATION REQUIRED: A brochure or specification sheet(s) of the platform body must be provided. State where this is provided in your proposal (e.g. page number, paragraph, etc.)

(d) Does the platform body have a metal front wall? FORMDROPDOWN ; If yes:

1) Front wall height

(e) Does the platform body have metal side walls? FORMDROPDOWN ; If yes:

1) Side wall height

2) Are side wall hinged such that they can be folded down? FORMDROPDOWN

(f) Does the platform body have a metal rear wall? FORMDROPDOWN ; If yes:

1) Rear wall height

2) Are rear wall hinged such that it can be folded down? FORMDROPDOWN

(g) Is the platform body provided with an easily removable tarpaulin cover and support structure? FORMDROPDOWN If yes:

1) Inside height

2) In the up position, can all four sides of the tarpaulin cover roll up and can they be securely fastened? FORMDROPDOWN

3) In the down position, can all four sides of the tarpaulin cover be held securely in place by tie-down ropes integrated into the tarpaulin with hooks on the platform body sides? FORMDROPDOWN

(h) Is the platform body provided with benches that can fold and be removed when not in use? FORMDROPDOWN ; If yes, seating capacity

1) Seat width per person

(i) Are at least four foldable tie-down rings in the platform body floor provided? FORMDROPDOWN

(j) Is there a rear ladder, step, or other equivalent means to assist personnel ingress and egress onto the platform body? FORMDROPDOWN ; If yes describe Comments:

10. CORROSION PROTECTION

(a) Is the entire exterior of the vehicle (where applicable) provided with Carwell (www.carwell.com) corrosion protection to prevent corrosion and rust? FORMDROPDOWN If yes, describe application process

(b) If the vehicle is not provided with Carwell, is it provided with an equivalent type of protection?

FORMTEXT

If yes, what type of protection is provided?

(c) Are different types of corrosion protection used on different parts of the vehicle? FORMDROPDOWN If yes, describe Comments:

SOURCE SELECTION SENSITIVE, SEE FAR 3.104

File details come from the government source that posted it.