Spec_ATTACH_0001_Hino_500_Truck-19R0111.doc

Solicitation W56HZV-19-R-0111 Specification (Attachment 0001) May 29, 2019

TRUCK, HINO 500 4X4 GENERAL TRANSPORT (PERSONNEL CARRIER)

THE TRUCK SHALL BE PROVIDED WITH ALL NEW PARTS, THE MANUFACTURER’S STANDARD EQUIPMENT, AND THE FOLLOWING MINIMUM EQUIPMENT & CAPABILITIES:

1. CONFIGURATION

1.1. The vehicle shall be a Hino model series 500, model FT1J-GUA, 4x4, 2-door truck with personnel carrier.

1.2. The vehicle shall be a 2018 model year or later, with no more than 200 miles (320 km) on the odometer.

2. EQUIPMENT

2.1. The vehicle shall be provided will all of the standard equipment found on a 4x4 Hino 500 2-door truck.

2.2. An ABC-type fire extinguisher, minimum 2.2 pound (1.0 kg) capacity, with mounting bracket shall be provided.

2.3. The vehicle shall be provided with a basic safety pack to include at least a first aid kit with non-expired items, three triangles, and tow rope.

2.4. The vehicle shall be provided with a portable 12-volt air compressor kit to include pump, hose, and fittings.

2.5. The vehicle shall be provided with storage to secure the basic safety pack and portable 12-volt air compressor kit.

2.6. Rear wheels shall be provided with anti-sail mud flaps.

2.7. Operator manual(s) shall be provided with the vehicle, written in English.

3. DIMENSIONS

3.1. The vehicle wheelbase shall be 147.6 inches (3,750 mm).

4. ENGINE

4.1. The vehicle shall have the 6-cylinder diesel engine capable of operating on high sulfur content diesel fuel (5,000 ppm of ½%).

4.2. The vehicle shall have an export engine and not be provided with emission control devices, such as but not limited to the Exhaust Gas Recirculation (EGR) valve, Diesel Particulate Filter (DPF), and Diesel Oxidation Catalyst (DOC).

4.3. The vehicle shall not have a higher emission standard than EURO II.

5. TRANSMISSION

5.1. The vehicle shall be provided with a manual transmission.

6. Steering

6.1. The vehicle shall be left-hand drive (LHD).

7. COLOR

7.1. The exterior color (at a minimum, the cab, body, and body walls) will be OEM White or Aftermarket Flat Dark Olive Green, as specified in the solicitation.

8. TOWING

8.1. Vehicle shall be provided with a trailer hitch receiver with a combination pintle hook with 2-5/16 inch ball with trailer tow package.

8.1.1. Pintle shall be compatible with trailer drawbar eye dimensions of 2-5/16 to 3.0 inches (58.7 to 76.2 mm) loop I.D. and 1.25 to 1.62 inches (31.8 to 41.1 mm) loop cross-section diameter.

8.2. 7-way towing connector shall be provided and installed.

9. PERSONNEL CARRIER

9.1. The vehicle shall be provided with a platform body with minimum dimensions of 168 inches (4,267 mm) length by 85 inches (2,159 mm) width.

9.2. The platform body shall have a metal front wall with a minimum height of 19.6 inches (500 mm).

9.3. The platform body shall have metal side walls that are at least 19.6 inches (500 mm) in height.

9.3.1. All side walls shall be hinged, so they can be folded down.

9.4. The platform body shall have a metal rear wall with a minimum height of 19.6 inches (500 mm).

9.4.1. Rear wall shall be hinged, so it can be folded down.

9.5. The platform body shall be provided with an easily removable support structure and tarpaulin cover (same as exterior cab/body color).

9.5.1. The inside height shall be at least 72 inches (1828 mm).

9.5.2. In the up position, all four sides of the tarpaulin cover shall be capable of being rolled-up and securely fastened at the top of the support structure.

9.5.3. In the down position, all four sides of the tarpaulin structure shall be held securely in place by a tie-down ropes integrated into the tarpaulin and the hooks on the platform body sides.

9.6. The platform body shall be provided with benches that can be removed when not in use. Additionally the benches should be able to be folded up for additional cargo space.

9.6.1. Benches shall be capable of accommodating at least 10 personnel.

9.6.1.1. Minimum personnel seat width shall be at least 19 inches (48 cm).

9.7. A minimum of four (4) foldable tie-down rings, in the platform floor, shall be supplied.

9.8. Rear ladder, step, or other equivalent means to assist personnel ingress and egress onto platform shall be provided.

10. CORROSION PROTECTION

10.1. The entire exterior of the vehicle (where applicable) shall be provided with Carwell (www.carwell.com) corrosion protection or an equivalent type of protection (e.g. Coating, e-coat, etc.) to prevent corrosion and rust.

10.2. An equivalent type of corrosion protection product may be used, if the following minimum criteria are met:

10.2.1. The product shall protect the vehicle from exposure to a salt atmosphere (minimum 336 hours) during open ocean transport.

10.2.2. The product shall inhibit vehicle rust and corrosion.

10.2.3. The product shall protect the vehicle for a minimum of 2 years after application.

10.2.4. The product shall not contain any toxic or harmful materials.

10.2.5. Type of corrosion protection used may be different on different parts of the vehicle.