W56HZV19Q0198-0003.pdf

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 1. Contract ID Code Page Of

2. Amendment/Modification No.

3. Effective Date

4. Requisition/Purchase Req No.

5. Project No. (If applicable)

6. Issued By Code 7. Administered By (If other than Item 6) Code

8. Name And Address Of Contractor (No., Street, City, County, State and Zip Code)

9A. Amendment Of Solicitation No.

9B. Dated (See Item 11)

10A. Modification Of Contract/Order No.

10B. Dated (See Item 13) Code Facility Code

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

The above numbered solicitation is amended as set forth in item 14. The hour and date specified for receipt of Offers is extended, is not extended.

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing items 8 and 15, and returning ____________ copies of the amendments: (b) By acknowledging receipt of this amendment on each copy of the offer submitted; or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. Accounting And Appropriation Data (If required)

13. THIS ITEM ONLY APPLIES TO MODIFICATIONS OF CONTRACTS/ORDERS

It Modifies The Contract/Order No. As Described In Item 14.

A. This Change Order is Issued Pursuant To: The Changes Set Forth In Item 14 Are Made In

The Contract/Order No. In Item 10A.

B. The Above Numbered Contract/Order Is Modified To Reflect The Administrative Changes (such as changes in paying office, appropriation data, etc.) Set

Forth In Item 14, Pursuant To The Authority of FAR 43.103(b).

C. This Supplemental Agreement Is Entered Into Pursuant To Authority Of:

D. Other (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return _______________ copies to the Issuing Office.

14. Description Of Amendment/Modification (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

Except as provided herein, all terms and conditions of the document referenced in item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. Name And Title Of Signer (Type or print)

16A. Name And Title Of Contracting Officer (Type or print)

15B. Contractor/Offeror 15C. Date Signed 16B. United States Of America 16C. Date Signed

By (Signature of person authorized to sign) (Signature of Contracting Officer)

NSN 7540-01-152-8070

PREVIOUS EDITIONS UNUSABLE

30-105-02 STANDARD FORM 30 (REV. 10-83)

Prescribed by GSA FAR (48 CFR) 53.243

SEE SCHEDULE

X

Firm Fixed Price

0003 2020JUL28

W56HZV

ACC-DTA

6501 E. 11 MILE RD.

DETROIT ARSENAL, MI 48397-5000

STEVEN P. NETTER

EMAIL: STEVEN.P.NETTER2.CIV@MAIL.MIL

W56HZV-19-Q-0198

2020JUN23

X

X 2020AUG05 02:00pm

/SIGNED/

2 signed

SEE SECOND PAGE FOR DESCRIPTION

1 18

CONTINUATION SHEET

Reference No. of Document Being Continued Page of

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

SUPPLEMENTAL INFORMATION

Buyer Name: STEVEN P. NETTER

Buyer Office Symbol/Telephone Number: CCTA-APN-B/(586)282-3533

Type of Contract 1: Firm Fixed Price

Kind of Contract: Supply Contracts and Priced Orders

Weapon System: Radar & Sensor

*** End of Narrative A0000 ***

The purpose of Amendment 0003 to solicitation W56HZV-19-Q-0198 is as follows:

1. To extend the proposal submission due date from 29 Jul 2019 to 05 Aug 2020.

2. The Spare Parts and Special Tools requirements have been removed from the solicitation.

3. SUPPLIES OR SERVICES AND PRICES/COST, CLIN 0002AA, Ford F550 Crane Truck spare Parts: is deleted

4. SUPPLIES OR SERVICES AND PRICES/COST, CLIN 0003AA, Ford F550 Crane Truck Special Tools: is deleted

5. DESCRIPTION/SPECIFICATIONS/WORK STATEMENT, Scope of Work, the following paragraphs are deleted:

C.1.2 The Ford F-550 Crane Truck spares shall be procured and delivered in accordance with Exhibit A, Spares List.

C.1.3 Exhibit B - The Ford F550 Special Tools shall be procured and delivered in accordance with Exhibit B, Special Tools List.

6. PACKAGING AND MARKING, para D.1.1 is revised as follows:

From:

Packaging and Marking for Outside the Continental United States (OCONUS) Shipping: Shipments are packed to not less than Military Level

A/B as defined in MILSTD-129 or in accordance with best commercial practices IAW 52.211-4517.

To:

Packaging and Marking for Outside the Continental United States (OCONUS) Shipping: Standard Commercial Packaging and Marking in accordance to ASTM D3951.

7. DELIVERIES OR PERFORMANCE, 52.247-60, GUARANTEED SHIPPING CHARACTERISTICS clause: Fill-ins for CLINs 0002AA and 0003AA are deleted.

8. CONTRACT CLAUSES, 52.212-5, CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR EXECUTIVE ORDERS--COMMERCIAL ITEMS - The following clauses are now marked with an X:

(14)(i) 52.219-6, Notice of Total Small Business Set-Aside (MAR 2020)

(28) 52.222-19, Child Labor Cooperation with Authorities and Remedies (Jan 2020)

(35)(i) 52.222-50, Combating Trafficking in Persons (Jan 2019)

(38) 52.223-11, Ozone-Depleting Substances and High Global Warming Potential Hydrofluorocarbons (June, 2016)

(44) 52.223-18, Encouraging Contractor Policies to Ban Text Messaging While Driving (AUG 2011)

The following clauses are now NOT marked with an X:

2 18

W56HZV-19-Q-0198

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

(36) 52.222-54, Employment Eligibility Verification (Oct 2015)

(42) 52.223-15, Energy Efficiency in Energy-Consuming Products (Dec 2007)

(55) 52.229-12, Tax on Certain Foreign Procurements (JUN 2020)

9. LIST OF ATTACHMENTS,

Exhibit A, Spare Parts - F550 Ford Crane Truck: is deleted

Exhibit B, Special Tools - F550 Ford Crane Truck: is deleted

Attachment 0001, SPECIFICATION - TRUCK, FORD F550 WITH SERVICE BODY & CRANE is revised as follows:

TRANSMISSION, Paragraph 5.1:

From: The vehicle shall be provided with an automatic transmission, 6 speed.

To: The vehicle shall be provided with an automatic transmission, 10 speed.

SERVICE BODY AND CRANE, Paragraph 9.11.4:

From: Shall be powered by the diesel generator.

To: Shall be powered by the diesel generator or a hydraulic PTO.

10. SECTION L Instructions to Offerors, the following paragraphs are deleted:

L.3 SPARE PARTS SPREADSHEETS: The offer shall complete the Spare Part Lists (Exhibit A). Failure to complete every item of the list may render your offer ineligible for award.

L.3.1. SPECIAL TOOLS LIST SPREADSHEET: The offeror shall complete the Special Tools List (Exhibit B). Failure to complete every item of the list may render your offer ineligible for award.

L.4 and L.4.1 are revised:

From:

L.4 PRICE INFORMATION: The offeror shall provide its completed RFP, to include Exhibit A, and Exhibit B, with its proposal. The offeror shall propose Firm-Fixed-Prices for all CLINs and Spare Parts and Special Tools included in Exhibit A and Exhibit B.

L.4.1 The offeror shall legibly fill-in, in U.S. Dollars, the unit price column and the total amount column in Section B for CLINs

0001AA, 0002AA, and 0003AA, and each line item of the yellow highlighted columns of Exhibit A, (Spares List), and Exhibit B, (Special

Tools List).

To:

L.4 PRICE INFORMATION: The offeror shall provide its completed RFP with its proposal. The offeror shall propose Firm-Fixed-Prices for all CLINs.

L.4.1 The offeror shall legibly fill-in, in U.S. Dollars, the unit price column and the total amount column in Section B for CLIN

0001AA.

11. Section M Evaluation, the following are revised:

From:

M.1 BASIS OF AWARD: The Government plans to award a single Firm-Fixed Price Contract for an Ford F550 4x4 Crew Cab Crane Truck, Spare

Parts, and Special Tools as a result of this solicitation. The Government reserves the right to choose not to award a contract if such action is in the Governments best interest.

M.5.2.1 Total Evaluated Price: The Price Factor evaluation will result in a determination of the Total Evaluated Price. The Total

3 18

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

Evaluated Price equals the sum of (a) the proposed prices for all CLINs, as calculated in Section B of RFP (CLIN 0002AA and CLIN 0003AA prices must match Exhibit A and Exhibit B total prices); and (b) the transportation costs determined by the ACC-Warren Transportation

Office for all FOB Origin CLINs.

M.6.1.2.1 For the purpose of this solicitation the method of shipping will be evaluated in accordance with 52.247-51, Evaluation of

Export Offers appropriate regulatory authorities and based on the dimensions the offeror provides in FAR 52.247-60, Guaranteed Shipping

Characteristics fill-ins for CLINs 0001AA, 0002AA, and 0003AA with offeror fill-in information from E.3 Inspection and Acceptance

Points: Origin and/or F.1. FOB Point. If E.3 and F.1 differ, Section E.3 will be used for evaluation purposes.

M.6.2.1 We will use the following quantities in conducting our evaluation:

CLIN # (Estimated Qty.) Vehicles Destination

0001AA 1 Each F550 Ford Crane Truck Origin

0002AA 1 Lot Contractor Spares Origin

0003AA 1 Lot Special Tools Origin

To:

M.1 BASIS OF AWARD: The Government plans to award a single Firm-Fixed Price Contract for an Ford F550 4x4 Crew Cab Crane Truck as a result of this solicitation. The Government reserves the right to choose not to award a contract if such action is in the Governments best interest.

M.5.2.1 Total Evaluated Price: The Price Factor evaluation will result in a determination of the Total Evaluated Price. The Total

Evaluated Price equals the sum of (a) the proposed prices for all CLINs, as calculated in Section B of RFP, and (b) the transportation costs determined by the ACC-Warren Transportation Office for all FOB Origin CLINs.

M.6.1.2.1 For the purpose of this solicitation the method of shipping will be evaluated in accordance with 52.247-51, Evaluation of

Export Offers appropriate regulatory authorities and based on the dimensions the offeror provides in FAR 52.247-60, Guaranteed Shipping

Characteristics fill-ins for CLIN 0001AA and with offeror fill-in information from E.3 Inspection and Acceptance Points: Origin and/or

F.1. FOB Point. If E.3 and F.1 differ, Section E.3 will be used for evaluation purposes.

M.6.2.1 We will use the following quantities in conducting our evaluation:

CLIN # (Estimated Qty.) Vehicles Destination

0001AA 1 Each F550 Ford Crane Truck Origin

*** END OF NARRATIVE A0005 ***

4 18

PIIN/SIIN

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

SUPPLIES OR SERVICES AND PRICES/COSTS

0002AA DELETED _______

0003AA DELETED _______

5 18

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

DESCRIPTION/SPECIFICATIONS/WORK STATEMENT

Scope of Work Ford F-550 Crane Truck

C.1 General

C.2 Photos

C.3 Meetings

C.1 General. The Contractor shall deliver the Ford F-550 Crane Truck in accordance with this Statement of Work (SOW). The

Ford F-550 Crane Truck shall be designed and built in accordance with Attachment 0001 (Specification).

C.1.1 The Contractor shall submit baseline configuration data in accordance with CDRL A003. After receipt of the baseline configuration data, the data will be incorporated into the contract by modification.

C.1.2 Deleted.

C.1.3 Deleted.

C.1.4 Fuel/Fluid: The Contractor shall fill all necessary fluids prior to presenting the trailers for acceptance.

C.2 Photos. The Contractor shall take photographs of the Ford F-550 Crane Truck produced per this contract. The photos shall be completed and submitted in accordance with CDRL A001.

C.3 Meetings: There will be one meeting as required by this SOW; A Start of Work Meeting.

C.3.1 Start of Work Meeting (SOWM). The contractor shall host a SOWM within 20 business days of contract award via a tele-conference. The contractor shall coordinate and schedule the date and time with the Government. The contractor shall provide a meeting agenda and minutes IAW CDRL A002. This meeting shall include the following topics at a minimum: a discussion of the

Scope of Work, CDRLs, and Attachments; the Vehicle Specifications; and other issues or concerns relating to the fulfillment of the contract. The SAMD Office, User Community Representatives, Army Contracting Command-Detroit Arsenal (ACC-DTA), and Defense

Contract Management Agency (DCMA) will be in attendance.

*** END OF NARRATIVE C0001 ***

PACKAGING AND MARKING

Section D

D.1 Packaging and Marking

D.1.1 Packaging and Marking for Outside the Continental United States (OCONUS) Shipping: Standard Commercial Packaging and Marking in accordance to ASTM D3951.

D.2 Radio Frequency Identification (RFID) Tags.

D.2.1 Each vehicle or item and associated lot of spares shall be tagged with a removable active RFID data rich tracking tag, specifically designated as either:

- SAVI ST-654-041, SAVI ST-654-031, IDENTEC I-Q310 DRT, or EVIGIA EV3-DRT

- The tag shall be located on the exterior of the vehicle or item in a noticeable and easily observable spot.

- See Attachment 0001 for more RFID information.

6 18

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

*** END OF NARRATIVE D0001 ***

DELIVERIES OR PERFORMANCE

Status Regulatory Cite Title Date Status Regulatory Cite Title Date _______ _______________ ______________________________________________________________________ ____________ _______ _______________ ______________________________________________________________________ ____________

1 CHANGED 52.247-60 GUARANTEED SHIPPING CHARACTERISTICS JAN/2017

FAR 52.247-60 Guaranteed Shipping Characteristics requires item (ix) the size of pallet/skid and contents, TACOM requests that contractors use the following to calculate the data:

a. To calculate Lbs in item (ix) above: [(v) x (vii)] + (viii)

b. To calculate Cube in item (ix) above: provide length, width and height of loaded pallet in inches. This should be greater than item

(iii).

(a) The offeror is requested to complete subparagraph (a)(1) of this clause, for each part or component which is packed or packaged separately. This information will be used to determine transportation costs for evaluation purposes. If the offeror does not furnish sufficient data in subparagraph (a)(1) of this clause, to permit determination by the Government of the item shipping costs, evaluation will be based on the shipping characteristics submitted by the offeror whose offer produces the highest transportation costs or in the absence thereof, by the Contracting Officers best estimate of the actual transportation costs. If the item shipping costs, based on the actual shipping characteristics, exceed the item shipping costs used for evaluation purposes, the Contractor agrees that the contract price shall be reduced by an amount equal to the difference between the transportation costs actually incurred, and the costs which would have been incurred if the evaluated shipping characteristics had been accurate.

CLIN 0001AA, FORD F-550 4X4 CRANE TRUCK

(1) To be completed by the offeror:

(i) Type of container: Wood Box ___, Fiber Box ___, Barrel ___, Reel ___, Drum ___, Other (Specify) _________;

(ii) Shipping configuration: Knocked-down ___, Set-up ___, Nested ___, Other (specify) _____________;

(iii) Size of container: ____" (Length), x ___" (Width), x ___" (Height) = ___ Cubic Ft;

(iv) Number of items per container ________ each;

(v) Gross weight of container and contents ____ Lbs;

(vi) Palletized/skidded ___Yes ___ No;

(vii) Number of containers per pallet/skid ______;

(viii) Weight of empty pallet bottom/skid and sides _______ Lbs;

(ix) Size of pallet/skid and contents _______ Lbs Cube ________;

(x) Number of containers or pallets/skids per railcar __________ *

Size of railcar _____________

Type of railcar _____________

(xi) Number of containers or pallets/skids per trailer ________*

Size of trailer _________ Ft

7 18

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

Type of trailer _________

* Number of complete units (line item) to be shipped in carriers equipment.

(2) To be completed by the Government after evaluation but before contract award:

(i) Rate used in evaluation ________;

(ii) Tender/Tariff _______;

(iii) Item ________________.

(b) The guaranteed shipping characteristics requested in subparagraph (a)(1) of this clause do not establish actual transportation requirements, which are specified elsewhere in this solicitation. The guaranteed shipping characteristics will be used only for the purpose of evaluating offers and establishing any liability of the successful offeror for increased transportation costs resulting from actual shipping characteristics which differ from those used for evaluation in accordance with paragraph (a) of this clause.

(End of Clause)

8 18

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

CONTRACT CLAUSES

2 CHANGED 52.212-5 CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR JUN/2020

EXECUTIVE ORDERS--COMMERCIAL ITEMS

(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial items:

(1) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (JAN 2017) (section 743 of Division

E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(2) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab and Other

Covered Entities (Jul 2018) (Section 1634 of Pub. L. 115-91).

(3) 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment. (AUG 2019)

(Section 889(a)(1)(A) of Pub. L. 115-232).

(4) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (Nov 2015)

(5) 52.233-3, Protest After Award (AUG 1996) (31 U.S.C. 3553).

(6) 52.233-4, Applicable Law for Breach of Contract Claim (OCT 2004) (Public Laws 108-77 and 108-78 (19 U.S.C. 3805 note)).

(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the contracting officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items:

___ (1) 52.203-6, Restrictions on Subcontractor Sales to the Government (Sep 2006), with Alternate I (Oct 1995)(41 U.S.C. 4704 and

10 U.S.C. 2402).

___ (2) 52.203-13, Contractor Code of Business Ethics and Conduct (Oct 2015) (41 U.S.C. 3509).

___ (3) 52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of 2009 (Jun 2010) (Section 1553 of

Pub. L. 111-5). (Applies to contracts funded by the American Recovery and Reinvestment Act of 2009.)

_X__ (4) 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (Oct 2018) (Pub. L. 109-282) (31 U.S.C. 6101 note).

___ (5) [Reserved].

___ (6) 52.204-14, Service Contract Reporting Requirements (Oct 2016) (Pub. L. 111-117, section 743 of Div. C).

___ (7) 52.204-15, Service Contract Reporting Requirements for Indefinite-Delivery Contracts (Oct 2016) (Pub. L. 111-117, section

743 of Div. C).

_X__ (8) 52.209-6, Protecting the Government's Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for

Debarment (Oct 2015) (31 U.S.C. 6101 note).

___ (9) 52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters (Oct 2018) (41 U.S.C. 2313).

___ (10) [Reserved]

___ (11)(i) 52.219-3, Notice of HUBZone Set-Aside or Sole-Source Award (MAR 2020) (15 U.S.C. 657a).

___ (ii) Alternate I (MAR 2020) of 52.219-3.

___ (12)(i) 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns (MAR 2020) (if the offeror elects to waive the preference, it shall so indicate in its offer) (15 U.S.C. 657a).

___ (ii) Alternate I (MAR 2020) of 52.219-4.

___ (13) [Reserved]

_X__ (14)(i) 52.219-6, Notice of Total Small Business Set-Aside (MAR 2020) (15 U.S.C. 644).

9 18

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

___ (ii) Alternate I (MAR 2020) of 52.219-6.

___ (iii) Alternate II (Nov 2011) of 52.219-6.

___ (15)(i) 52.219-7, Notice of Partial Small Business Set-Aside (MAR 2020)(15 U.S.C. 644).

___ (ii) Alternate I (MAR 2020) of 52.219-7.

___ (iii) Alternate II (Mar 2004) of 52.219-7.

___ (16) 52.219-8, Utilization of Small Business Concerns (Oct 2018) (15 U.S.C. 637(d)(2) and (3)).

___ (17)(i) 52.219-9, Small Business Subcontracting Plan (MAR 2020) (15 U.S.C. 637(d)(4)).

___ (ii) Alternate I (Nov 2016) of 52.219-9.

___ (iii) Alternate II (Nov 2016) of 52.219-9.

___ (iv) Alternate III (MAR 2020) of 52.219-9.

___ (v) Alternate IV (Aug 2018) of 52.219-9.

___ (18) 52.219-13, Notice of Set-Aside of Orders (MAR 2020) (15 U.S.C. 644(r)).

___ (19) 52.219-14, Limitations on Subcontracting (MAR 2020)(15 U.S.C. 637(a)(14)).

___ (20) 52.219-16, Liquidated Damages--Subcontracting Plan (JAN 1999) (15 U.S.C. 637(d)(4)(F)(i)).

___ (21) 52.219-27, Notice of Total Service-Disabled Veteran-Owned Small Business Set-Aside (MAR 2020)(15 U.S.C. 657 f)

_X__ (22) 52.219-28, Post Award Small Business Program Rerepresentation (MAR 2020)(15 U.S.C. 632(a)(2)).

___ (i) Alternate I (MAR 2020) of 52.219-28.

___ (23) 52.219-29 Notice of Total Set-Aside for Economically Disadvantaged Women-Owned Small Business (EDWOSB) Concerns (MAR 2020)

(15 U.S.C. 637(m)).

___ (24) 52.219-30 Notice of Total Set-Aside for Women-Owned Small Business (WOSB) Concerns Eligible Under the WOSB Program (MAR

2020) (15 U.S.C. 637(m)).

___ (25) 52.219-32, Orders Issued Directly Under Small Business Reserves (MAR 2020) (15 U.S.C. 644(r)).

_X__ (26) 52.219-33, Nonmanufacturer Rule (MAR 2020) (15 U.S.C. 637(a)(17)).

___ (27) 52.222-3, Convict Labor (June 2003)(E.O. 11755).

_X__ (28) 52.222-19, Child LaborCooperation with Authorities and Remedies (Jan 2020) (E.O. 13126).

___ (29) 52.222-21, Prohibition of Segregated Facilities (Apr 2015).

_X__ (30)(i) 52.222-26, Equal Opportunity (Sep 2016)(E.O. 11246).

___ (ii) Alternate I (Feb 1999) of 52.222-26.

___ (31)(i) 52.222-35, Equal Opportunity for Veterans (Oct 2015)(38 U.S.C. 4212).

___ (ii) Alternate I (July 2014) of 52.222-35.

___ (32)(i) 52.222-36, Equal Opportunity for Workers with Disabilities (Jul 2014)(29 U.S.C. 793).

___ (ii) Alternate I (July 2014) of 52.222-36.

_X__ (33) 52.222-37, Employment Reports on Special Disabled Veterans, Veterans of the Vietnam Era, and Other Eligible Veterans (Feb

2016)(38 U.S.C. 4212).

10 18

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

___ (34) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O. 13496).

_X__ (35)(i) 52.222-50, Combating Trafficking in Persons (Jan 2019) (22 U.S.C. chapter 78 and E.O. 13627).

___ (ii) Alternate I (Mar 2015) of 52.222-50 (22 U.S.C. chapter 78 and E.O. 13627).

___ (36) 52.222-54, Employment Eligibility Verification (Oct 2015). (Executive Order 12989). (Not applicable to the acquisition of commercially available off-the-shelf items or certain other types of commercial items as prescribed in 22.1803.)

___ (37)(i) 52.223-9, Estimate of Percentage of Recovered Material Content for EPA-Designated Items (May 2008) (42 U.S.C.

6962(c)(3)(A)(ii)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

___ (ii) Alternate I (May 2008) of 52.223-9 (42 U.S.C. 6962(i)(2)(C)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

_X__ (38) 52.223-11, Ozone-Depleting Substances and High Global Warming Potential Hydrofluorocarbons (June, 2016) (E.O. 13693).

___ (39) 52.223-12, Maintenance, Service, Repair, or Disposal of Refrigeration Equipment and Air Conditioners (June, 2016) (E.O.

13693).

___ (40)(i) 52.223-13, Acquisition of EPEAT[supreg]-Registered Imaging Equipment (Jun 2014) (E.O.s 13423 and 13514).

___ (ii) Alternate I (Oct 2015) of 52.223-13.

___ (41)(i) 52.223-14, Acquisition of EPEAT[supreg]-Registered Televisions (Jun 2014) (E.O.s 13423 and 13514).

___ (ii) Alternate I (Jun 2014) of 52.223-14.

___ (42) 52.223-15, Energy Efficiency in Energy-Consuming Products (Dec 2007) (42 U.S.C. 8259b).

___ (43)(i) 52.223-16, Acquisition of EPEAT[supreg]-Registered Personal Computer Products (Oct 2015) (E.O.s 13423 and 13514).

___ (ii) Alternate I (Jun 2014) of 52.223-16.

_X__ (44) 52.223-18, Encouraging Contractor Policies to Ban Text Messaging While Driving (AUG 2011) (E.O. 13513).

___ (45) 52.223-20, Aerosols (June, 2016) (E.O. 13693).

___ (46) 52.223-21, Foams (June, 2016) (E.O. 13693).

___ (47)(i) 52.224-3, Privacy Training (JAN 2017) (5 U.S.C. 552a).

___ (ii) Alternate I (JAN 2017) of 52.224-3.

___ (48) 52.225-1, Buy American--Supplies (MAY 2014) (41 U.S.C. chapter 83).

___ (49)(i) 52.225-3, Buy American--Free Trade Agreements--Israeli Trade Act (MAY 2014) (41 U.S.C. chapter 83, 19 U.S.C. 3301 note, 19 U.S.C. 2112 note, 19 U.S.C. 3805 note, 19 U.S.C. 4001 note, Pub. L. 103-182, 108-77, 108-78, 108-286, 108-302, 109-53, 109-169, 109-

283, 110-138, 112-41, 112-42, and 112-43.

___ (ii) Alternate I (MAY 2014) of 52.225-3.

___ (iii) Alternate II (MAY 2014) of 52.225-3.

___ (iv) Alternate III (MAY 2014) of 52.225-3.

___ (50) 52.225-5, Trade Agreements (Oct 2019) (19 U.S.C. 2501, et seq., 19 U.S.C. 3301 note).

___ (51) 52.225-13, Restrictions on Certain Foreign Purchases (Jun 2008) (E.o.s, proclamations, and statutes administered by the

Office of Foreign Assets Control of the Department of the Treasury).

___ (52) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Jul 2013) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. 2302 Note).

___ (53) 52.226-4, Notice of Disaster or Emergency Area Set-Aside (Nov 2007) (42 U.S.C. 5150).

___ (54) 52.226-5, Restrictions on Subcontracting Outside Disaster or Emergency Area (Nov 2007)(42 U.S.C. 5150).

___ (55) 52.229-12, Tax on Certain Foreign Procurements (JUN 2020).

11 18

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

___ (56) 52.232-29, Terms for Financing of Purchases of Commercial Items (Feb 2002)(41 U.S.C. 4505, 10 U.S.C. 2307(f)).

___ (57) 52.232-30, Installment Payments for Commercial Items (Jan 2017)(41 U.S.C. 4505, 10 U.S.C. 2307(f)).

___ (58) 52.232-33, Payment by Electronic Funds Transfer -- System for Award Management (Oct 2018)(31 U.S.C. 3332).

___ (59) 52.232-34, Payment by Electronic Funds Transfer -- Other Than System for Award Management (Jul 2013)(31 U.S.C. 3332).

___ (60) 52.232-36, Payment by Third Party (MAY 2014) (31 U.S.C. 3332).

___ (61) 52.239-1, Privacy or Security Safeguards (Aug 1996)(5 U.S.C. 552a).

___ (62) 52.242-5, Payments to Small Business Subcontractors (Jan 2017)(15 U.S.C. 637(d)(13)).

___ (63)(i) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (Feb 2006)(46 U.S.C. Appx 1241(b) and 10 U.S.C.

2631).

___ (ii) Alternate I (Apr 2003) of 52.247-64.

___(iii) Alternate II (Feb 2006) of 52.247-64.

(c) The Contractor shall comply with the FAR clauses in this paragraph (c), applicable to commercial services, that the Contracting

Officer has indicated as being incorporated in this contract by reference to implement provisions of law or executive orders applicable to acquisitions of commercial items:

___ (1) 52.222-41, Service Contract Labor Standards (Aug 2018) (41 U.S.C. chapter 67).

___ (2) 52.222-42, Statement of Equivalent Rates for Federal Hires (MAY 2014) (29 U.S.C. 206 and 41 U.S.C. chapter 67).

___ (3) 52.222-43, Fair Labor Standards Act and Service Contract Labor Standards--Price Adjustment (Multiple Year and Option

Contracts) (MAY 2014) (29 U.S.C. 206 and 41 U.S.C. chapter 67).

___ (4) 52.222-44, Fair Labor Standards Act and Service Contract Labor Standards--Price Adjustment (MAY 2014) (29 U.S.C 206 and 41

U.S.C. chapter 67).

___ (5) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or

Repair of Certain Equipment--Requirements (MAY 2014) (41 U.S.C. chapter 67).

___ (6) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services--

Requirements (MAY 2014) (41 U.S.C. chapter 67).

___ (7) 52.222-55, Minimum Wages Under Executive Order 13658 (Dec 2015) (Executive Order 13658).

___ (8) 52.222-62, Paid Sick Leave Under Executive Order 13706 (Jan 2017) (E.O. 13706).

___ (9) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations (MAY 2014) (42 U.S.C. 1792).

(d) Comptroller General Examination of Record. The Contractor shall comply with the provisions of this paragraph (d) if this contract was awarded using other than sealed bid, is in excess of the simplified acquisition threshold, and does not contain the clause at 52.215-

2, Audit and Records -- Negotiation.

(1) The Comptroller General of the United States, or an authorized representative of the Comptroller General, shall have access to and right to examine any of the Contractors directly pertinent records involving transactions related to this contract.

(2) The Contractor shall make available at its offices at all reasonable times the records, materials, and other evidence for examination, audit, or reproduction, until 3 years after final payment under this contract or for any shorter period specified in FAR

Subpart 4.7, Contractor Records Retention, of the other clauses of this contract. If this contract is completely or partially terminated, the records relating to the work terminated shall be made available for 3 years after any resulting final termination settlement. Records relating to appeals under the disputes clause or to litigation or the settlement of claims arising under or relating to this contract shall be made available until such appeals, litigation, or claims are finally resolved.

(3) As used in this clause, records include books, documents, accounting procedures and practices, and other data, regardless of type and regardless of form. This does not require the Contractor to create or maintain any record that the Contractor does not maintain in the ordinary course of business or pursuant to a provision of law.

12 18

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

(e)(1) Notwithstanding the requirements of the clauses in paragraphs (a), (b), (c) and (d) of this clause, the Contractor is not required to flow down any FAR clause, other than those in this paragraph (e)(1) in a subcontract for commercial items. Unless otherwise indicated below, the extent of the flow down shall be as required by the clause--

(i) 52.203-13, Contractor Code of Business Ethics and Conduct (Oct 2015) (41 U.S.C. 3509).

(ii) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (JAN 2017) (section 743 of

Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(iii) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab and Other

Covered Entities (Jul 2018) (Section 1634 of Pub. L. 115-91).

(iv) 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment. (AUG 2019)

(Section 889(a)(1)(A) of Pub. L. 115-232).

(v) 52.219-8, Utilization of Small Business Concerns (Oct 2018) (15 U.S.C. 637(d)(2) and (3)), in all subcontracts that offer further subcontracting opportunities.

(vi) 52.222-21, Prohibition of Segregated Facilities (Apr 2015).

(vii) 52.222-26, Equal Opportunity (Sep 2016) (E.O. 11246).

(viii) 52.222-35, Equal Opportunity for Veterans (Oct 2015)(38 U.S.C. 4212).

(ix) 52.222-36, Equal Opportunity for Workers with Disabilities (Jul 2014)(29 U.S.C. 793).

(x) 52.222-37, Employment Reports on Veterans (Feb 2016) (38 U.S.C. 4212).

(xi) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (DEC 2010) (E.O. 13496).

(xii) 52.222-41, Service Contract Labor Standards (Aug 2018) (41 U.S.C. chapter 67).

(xiii)(A) 52.222-50, Combating Trafficking in Persons (Jan 2019) (22 U.S.C. 7104(g)).

(B) Alternate I (Mar 2015) of 52.222-50 (22 U.S.C. 7104(g)).

(xiv) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or

Repair of Certain Equipment--Requirements (MAY 2014) (41 U.S.C. chapter 67).

(xv) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services--Requirements

(MAY 2014) (41 U.S.C. chapter 67).

(xvi) 52.222-54, Employment Eligibility Verification (Oct 2015).

(xvii) 52.222-55, Minimum Wages Under Executive Order 13658 (Dec 2015) (Executive Order 13658).

(xviii) 52.222-62 Paid Sick Leave Under Executive Order 13706 (Jan 2017) (E.O. 13706).

(xix)(A) 52.224-3, Privacy Training (JAN 2017) (5 U.S.C. 552a).

(B) Alternate I (JAN 2017) of 52.224-3.

(xx) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Jul 2013) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. 2302 Note).

(xxi) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations (MAY 2014) (42 U.S.C. 1792). Flow down required in accordance with paragraph (e) of FAR clause 52.226-6.

(xxii) 52.247-64, Preference for Privately-Owned U.S. Flag Commercial Vessels (Feb 2006)(46 U.S.C. Appx 1241(b) and 10 U.S.C. 2631).

Flow down required in accordance with paragraph (d) of FAR clause 52.247-64.

(2) While not required, the Contractor may include in its subcontracts for commercial items a minimal number of additional clauses necessary to satisfy its contractual obligations.

13 18

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

(End of Clause)

14 18

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

LIST OF ATTACHMENTS

List of Number List of Number

Addenda Title Date of Pages Transmitted By Addenda Title Date of Pages Transmitted By________________ ____________________________________________________________ _______________ ____________ _______________________________ ____________________________________________________________ _______________ ____________ _______________

Attachment 0001 SPECIFICATION - TRUCK, FORD F550 WITH SERVICE BODY & CRANE 30-NOV-2019 003 DATA

15 18

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

INSTRUCTIONS, CONDITIONS, AND NOTICES TO OFFERORS

SECTION L Instructions to Offerors:

L.1 PROPOSAL INSTRUCTIONS: The proposal shall be accompanied by an electronic cover letter (letter of transmittal) which is to be included in the proposal, as submitted via email in accordance with (IAW) Section A.1(c), Electronic Contracting, to identify all enclosures being submitted with the proposal. Extreme care and attention should be given to ensure that all necessary items are included in the proposal.

L.1.2 Offerors are cautioned that a proposal is not considered received until the Contract Specialist replies to the respective Offeror stating receipt of proposal submission. NOTE: These actions are not instantaneous. Offerors should email proposals well in advance of the solicitation closing date and time to ensure that the entire proposal is received in time to be considered for award.

L.2 CLAUSE FILL-INS: Some clauses require the offeror to fill in information. Please pay particular attention to 52.247-60 GUARANTEED

SHIPPING CHARACTERISTICS and E.3 INSPECTION AND ACCEPTANCE POINTS: ORIGIN as that information will be used by the Government to calculate transportation costs. A completed copy of clause 52.212-3, Offeror Representations and Certifications Commercial Items, must be included with your proposal.

L.3 Deleted.

L.3.1. Deleted.

L.4 PRICE INFORMATION: The offeror shall provide its completed RFP with its proposal. The offeror shall propose Firm-Fixed-Prices for all CLINs.

L.4.1 The offeror shall legibly fill-in, in U.S. Dollars, the unit price column and the total amount column in Section B for CLIN

0001AA.

L.5 PERIOD OF ACCEPTANCE OF OFFERS: In accordance with FAR 52.212-1, the Government intends to evaluate proposals and award a contract without discussions with offerors. However, the Government reserves the right to conduct discussions if the Contracting Officers later determines them to be necessary. The burden of providing thorough and complete information remains with the offerors. The Government is not obligated to make another request for the required information, nor does the Government assume the duty to search for data to cure problems it finds in proposals. The offerors initial proposal should contain the offerors best terms for price.

*** END OF NARRATIVE L0001 ***

EVALUATION FACTORS FOR AWARD

SECTION M Evaluation:

M.1 BASIS OF AWARD: The Government plans to award a single Firm-Fixed Price Contract for an Ford F550 4x4 Crew Cab Crane Truck. The

Government reserves the right to choose not to award a contract if such action is in the Governments best interest.

M.1.1.1 Price is the only evaluation factor.

M.1.1.2 It is the Governments intent to award a single contract to an offeror that is eligible for award. Award will be made using

Lowest Price in accordance with FAR 13 Simplified Acquisition Procedures. The Government will follow the process set forth in Section

M.3 below.

M.1.1.3 AWARD WITHOUT DISCUSSIONS: In accordance with FAR clause 52.212-1(g), the Government intends to evaluate proposals and award a contract without discussions with Offerors (this excludes clarifications, as described in FAR 15.306(a)). Therefore, the offeror's initial proposal should contain the offeror's best terms from a price and technical capability standpoint. The Government reserves the right to conduct discussions if the Contracting Officer later determines them to be necessary. In addition, the Government reserves the right, without entering discussions, to request additional information necessary to support the offerors price in order to determine price reasonable. If discussions are held, they will be conducted with all offerors included in the competitive range.

M.2 REJECTION OF OFFERS

M.2.1 The Government may reject any proposal if doing so is in the Government's best interest at any time after receipt of proposal.

16 18

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

Examples include, but are not limited to, the following proposal conditions:

a. The proposal fails to meaningfully respond to the instructions in Section L of this solicitation (e.g.. fails to submit pricing information in accordance with the instructions, fails to follow key proposal instructions or format requirements in Section L; or fails to provide data and information required in Section L); or

b. When an offerors proposal offers a product or service that does not meet all stated material requirements of the solicitation; or

c. The proposal proposes exceptions to the solicitation requirements, attachments, exhibits, enclosures, or solicitation terms and conditions; or

d. The proposal contains one or more Organizational Conflict of Interest (OCI) OCIs that cannot be avoided or mitigated; or

e. The proposal fails to include clause fill-ins.

M.3 EVALUATION PROCESS:

M.3.1 The evaluation will be conducted in accordance with FAR 13 Simplified Acquisition Procedures. There is one factor: (1) Price.

M.3.1.1 Unless otherwise rejected, proposals will first be sorted by lowest proposed price to highest proposed price. The Government will then conduct transportation evaluations starting with the lowest proposed price. The Government will continue to conduct transportation evaluations until the total evaluated price of an offerors proposal is lower than the next offerors proposed price. Once this point is reached, the Government will stop conducting transportation evaluations.

M.3.1.2 If the lowest total evaluated priced proposal is determined to be ineligible for award, then the Government will move on the next lowest total evaluated priced offeror's proposal and repeat the procedures at M.3.1.1 above.

M.4 CONTRACTOR RESPONSIBILITY AND ELIGIBILITY FOR AWARD

(a)The Government will award a contract to the offeror that:

(1) submits the lowest total evaluated price to the Government,

(2) submits a bid or proposal that meets all the material requirements of this solicitation, and

(3) meets all the responsibility criteria at FAR 9.104.

(b) To make sure that an offeror meets the responsibility criteria at FAR 9.104 the Government may:

(1) arrange a visit to the offerors plant and perform a preaward survey;

(2) ask the offeror to provide financial, technical, production, or managerial background information.

(c) If the offeror does not provide the Government with the data requested within 7 days from the date the requested is received, or if the offeror refuses to have an onsite visit to the offerors facility, the Government may determine the offeror to be nonresponsible.

(d) If the Government visits the offerors facility, please make sure that current certified financial statements and other data relevant to the bid or proposal available for Government personnel to review.

M.5 EVALUATION CRITERIA:

M.5.2 PRICE FACTOR: The Price Factor evaluation will consist of the following:

M.5.2.1 Total Evaluated Price: The Price Factor evaluation will result in a determination of the Total Evaluated Price. The Total

Evaluated Price equals the sum of (a) the proposed prices for all CLINs, as calculated in Section B of RFP, and (b) the transportation costs determined by the ACC-Warren Transportation Office for all FOB Origin CLINs.

M.5.2.2 Price Reasonableness: The Government will assess the reasonableness of the offerors proposed price. A price is reasonable if, in its nature and amount, it does not exceed that which would be incurred by a prudent person in the conduct of competitive business.

The Government may make a determination of price reasonableness by any means allowable under FAR 13.106-3.

M.5.2.3 Unbalanced Pricing: Unbalanced pricing exists when, despite an acceptable total evaluated price, the price of one or more contract line items or ranges is significantly over- or understated as indicated by the application of cost and price analysis techniques. Offerors are cautioned that a proposal the Government assesses to be unbalanced as to price, may either be rejected or determined unacceptable for award. See FAR 15.404-1(g) for more information on unbalanced pricing.

M.6 METHOD OF EVALUATION FOR F.O.B. ORIGIN TRANSPORTATION OFFERS

For the evaluation of this offer, we will use the lowest freight rates from the Transportation Officer that are:

(a) In effect (or the lowest rates that will become effective before the expected date of initial shipment),

(b) On file or published with the Transportation Officer by the date of bid opening (or by the closing date specified for requests for proposals),

(c) For the Government selected method of shipment, and

17 18

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

(d) Based upon the following freight classification:

STCC: 6001-AU STCC ITEM NO: 3531416

NMFC: STB NMF 100-AS NMFC ITEM NO: 118900

M.6.1 The port used for the Government's Transportation Evaluation will be port Belize City, Belize.

M.6.1.1 The Government transportation evaluation will utilize offeror FAR 52.247-60, Guaranteed Shipping Characteristics fill-ins. IAW

FAR 52.247-60 and Section F, Transportation Data for FOB Origin Offers, the contractor shall complete fill-ins for transportation methods for shipment.

M.6.1.2 The Government will apply the lowest evaluated transportation cost for the offerors proposed shipping characteristics to the proposed price.

M.6.1.2.1 For the purpose of this solicitation the method of shipping will be evaluated in accordance with 52.247-51, Evaluation of

Export Offers appropriate regulatory authorities and based on the dimensions the offeror provides in FAR 52.247-60, Guaranteed Shipping

Characteristics fill-ins for CLIN 0001AA and with offeror fill-in information from E.3 Inspection and Acceptance Points: Origin and/or

F.1. FOB Point. If E.3 and F.1 differ, Section E.3 will be used for evaluation purposes.

M.6.2 Evaluation of Transportation Costs: To determine the low offeror, the Government will evaluate those transportation costs that apply to the quantities detailed below, by using the methodology described in the Section M FAR clause 52.247-47 entitled Evaluation

FOB Origin, in addition to, utilizing information the offeror provides in E.3. Inspection and Acceptance Points: Origin, the Governments required delivery schedule in accordance with FAR 52.211-8, Time of Delivery, dimensions provided in FAR 52.247-60, Guaranteed Shipping

Characteristics for the vehicle and spare parts, F.2. Transportation Data for FOB Origin Offers, F.1. FOB Point, and Section M.6 Method of Evaluation for F.O.B Origin Transportation Offers.

M.6.2.1 We will use the following quantities in conducting our evaluation:

CLIN #______ (Estimated Qty.)_________________ Vehicles_________ Destination____________

0001AA 1 Each F550 Ford Crane Truck Origin

*** END OF NARRATIVE M0001 ***

18 18

MOD/AMD

ATT/EXH ID

PAGE

Attachment 0001

SPECIFICATION NOVEMBER 2019___________________________

ATTACHMENT 0001_______________

TRUCK, FORD F550 WITH SERVICE BODY AND CRANE____________________________________________

THE TRUCK SHALL BE PROVIDED WITH ALL NEW PARTS, THE MANUFACTURERS STANDARD EQUIPMENT, AND THE FOLLOWING MINIMUM EQUIPMENT AND

CAPABILITIES:

1. CONFIGURATION

1.1. The vehicle shall be a 4x4 Ford F550, 4 door, Crew Cab chassis cab, export model fitted with service body and crane.

1.2. The vehicle shall be a 2019 model year or later, with no more than 250 miles (402 km) on the odometer.

2. EQUIPMENT

2.1. An ABC type fire extinguisher, minimum 2.2\~pound (1.0\~kg) capacity, with mounting bracket shall be provided.

2.2. The vehicle shall be provided with a basic safety pack to include at least a first aid kit, three triangles, and tow rope.

2.3. The vehicle shall be provided with a portable 12 volt air compressor kit to include pump, hose, and fittings.

2.4. The vehicle shall be provided with storage to secure the basic safety pack and portable 12 volt air compressor kit.

2.5. Vehicle shall be equipped with exterior back-up alarm.

2.6. Vehicle shall be provided with front and rear tow hooks.

2.7. Vehicle shall be provided with brush guard.

2.8. Operator manual(s) shall be provided with the vehicle, written in English.

2.9. Vehicle shall be provided with orange color emergency lights with controls in cab.

2.10. Vehicle shall be provided with a first aid kit.

2.11. Vehicle shall be provided with spare tire and wheel.

3. DIMENSIONS

3.1. The vehicle wheelbase shall be 203.8 inches (5,176 mm).

4. ENGINE

4.1. The vehicle shall have the 6.7L (408 cu in) Power Stroke V8 turbo diesel engine capable of operating on high sulfur content diesel fuel (5,000 ppm of 1/2%).

4.2. The vehicle shall have an export engine and not be provided with emission control devices, such as but not limited to the Exhaust Gas Recirculation (EGR) valve, Diesel Particulate Filter (DPF), and Diesel Oxidation Catalyst (DOC).

4.3. High-Sulfur Diesel Modification Package code 98H must be provided.

5. TRANSMISSION

5.1. The vehicle shall be provided with an automatic transmission, 10 speed.

5.2. A manually operated transfer case shall be provided.

5.3. Limited-slip rear axle shall be provided.

6. Steering

6.1. The vehicle shall be left-hand drive.

7. COLOR

7.1. The exterior color of the vehicle will be white.

8. TOWING

8.1. Vehicle shall be provided with a trailer hitch receiver with a pintle with trailer tow package

8.1.1. Pintle shall be compatible with trailer drawbar eye dimensions of 2.0 to 3.0 inches (50.8 to 76.2 mm) loop

I.D. and 1.25 to 1.62 inches (31.8 to 41.1 mm) loop cross-section diameter.

8.2. The vehicle shall be provided with the electric trailer brake controller and installed.

9. service body and crane

9.1. The vehicle shall be provided with a service body (e.g. Knapheide, XL, or equivalent) constructed of corrosion resistant steel or aluminum.

9.2. The service body shall have compartments with drawers and shelves on both the passenger and drivers sides of the vehicle that face outward.

9.2.1. Drawers and shelves shall be provided with rubber, foam, or similar type of lining to prevent tools from

MOD/AMD

ATT/EXH ID

PAGE

Attachment 0001 moving and rattling during transit.

9.2.2. All compartment doors shall be lockable and all locks on the service body shall be identically keyed.

9.3. The floor of the cargo area shall be provided with a non-slip surface.

9.4. The service body shall be equipped with grab handles.

9.5. All service body compartments shall be provided with lighting.

9.6. A step bumper or other means to gain access to the service body shall be provided.

9.7. The service body shall be provided with a crane that has a minimum lifting capacity of 7500 pounds at a distance of 5

ft. 8 in.

9.7.1. The crane shall have a maximum reach of at least 20 ft.

9.7.2. The service body shall have outriggers/downriggers to support the crane.

9.8. The vehicle shall be equipped with a diesel generator:

9.8.1. Minimum continuous power output of 17.25 kW

9.8.2. Equipped with its own, separate fuel tank

9.9. A welder, Millermatic 350P (or equivalent) aluminum welder with XR-Aluma Pro 25 foot air cooled gun shall be provided.

9.9.1. The welder shall be powered by the diesel generator.

9.10. Oxy-Acetylene welding unit including oxygen tank, acetylene tank, regulators, torch, and tips shall be provided.

9.11. The vehicle shall be provided with an air compressor:

9.11.1. Shall have a minimum of a 25 gallon (95 liter) ASME certified tank.

9.11.2. Shall be capable of 10 scfm at 90 psi.

9.11.3. Shall be equipped with a minimum of 25 ft (7.6 m) of air hose and adapter to power air tools.

9.11.4. Shall be powered by the diesel generator or a hydraulic PTO.

10. RADIO FREQUENCY IDENTIFICATION (RFID) TAGS

10.1. Each vehicle or item and associated lot of spares…