TIQ_-_Ford_F550_Crew_Cab_4x4_crane_truck.doc

Solicitation

Technical Information Questionnaire (TIQ) (Attachment 0002) March 2019

FAILURE TO PROVIDE ALL OF THE INFORMATION REQUIRED BELOW MAY RENDER YOUR PROPOSAL INELIGIBLE FOR AWARD.

TRUCK, FORD F550 WITH SERVICE BODY AND CRANE

The purpose of this questionnaire is to determine the suitability of your equipment to satisfy the requirements as stated in the specification. YOU MUST PROVIDE A RESPONSE TO ALL QUESTIONS. Failure to provide a response may result in the rejection of your proposal.

Units: The data provided in the response to the Technical Information Questionnaire (TIQ) shall be provided in English units, unless otherwise specified. Metric units may be provided if clearly defined and identified.

All written information shall be in English.

In addition to responding to the questions below, the offeror shall provide the following:

(a) Vehicle and major component commercial literature or specification sheets or any other information that would substantiate the information provided. If your commercial literature does not provide information relating to a particular question, you are required to provide a written explanation of your ability to meet that particular requirement with your written proposal. Where indicated herein, supporting documentation must be provided along with the location of that information stated (e.g. page number, paragraph, etc).

1) Supporting documentation is required for sections 1(a)2, 2(a)(1), 4(c)1, 9(a)2, and 9(g)4.

(b) Identification of all modifications and/or redesigns to the previously manufactured base vehicle necessary to meet the requirements of the specifications. The offeror shall also explain in detail the reasons for the modifications or redesigns.

Information Notes

(a) For components procured by the vehicle manufacturer, the component manufacturer’s name and model or part number shall be shown.

GENERAL INFORMATION REQUIRED

Personnel Responding to Questionnaire:

(a) Name:

(b) Job Title:

(c) Company Name:

(d) Telephone/Fax Numbers:

(e) E-mail address:

(f) Mailing address:

(g) Company Website:

Comments:

1. CONFIGURATION

(a) Is the vehicle a 4x4 Ford F550 4 door, Crew Cab with service body and crane? FORMDROPDOWN

1) Service body and crane manufacturer model

2) SUPPORTING DOCUMENTATION REQUIRED: A brochure or specification sheet(s) of the service body and crane must be provided. State where this information is provided in your proposal (e.g. page number, paragraph, etc.)

(b) Is the vehicle a 2019 model year or later, with no more than 250 miles on the odometer? FORMDROPDOWN

Comments:

2. EQUIPMENT

Is the vehicle equipped with: (yes/no and briefly expand in comment section, as needed)

(a) All of the standard equipment typically found on a 4x4 Ford F550 Crew Cab Truck? FORMDROPDOWN

1) SUPPORTING DOCUMENTATION REQUIRED: A brochure or specification sheet(s) listing all standard equipment found on a 4x4 Ford F550 Crew Cab Truck must be provided. State where this information is provided in your proposal (e.g. page number, paragraph, etc.)

(b) An exterior back-up alarm? FORMDROPDOWN

(c) Operator manual(s) provided for the vehicle in English? FORMDROPDOWN

Comments:

3. DIMENSIONS (inches)

(a) Wheelbase:

Comments:

4. ENGINE

(a) Does the vehicle have the 6.7L (408 cu in) Power Stroke V8 turbo diesel engine capable of operating on high sulfur content diesel fuel (5,000 ppm of ½%)? FORMDROPDOWN

(b) Is the vehicle provided with any emission control devices? FORMDROPDOWN if yes, list emission control devices

(c) What Ford export model code option is being provided?

1) SUPPORTING DOCUMENTATION REQUIRED: A Ford spec sheet with this export model code listed must be provided. State where this information is provided in your proposal (e.g. page number, paragraph, etc.)

Comments:

5. TRANSMISSION

(a) Type: FORMDROPDOWN

(b) Is a manually operated transfer case provided? FORMDROPDOWN

(c) Limited-slip rear axle provided? FORMDROPDOWN

Comments:

6. STEERING

(a) Is the vehicle left-hand drive? FORMDROPDOWN

Comments:

7. COLOR

(a) Is the exterior color of the vehicle white? FORMDROPDOWN

Comments:

8. TOWING

(a) Is the vehicle equipped with a trailer hitch receiver and a pintle? FORMDROPDOWN , if yes:

1) Pintle Manufacturer:

Comments:

9. SERVICE BODY AND CRANE

(a) Is the vehicle provided with a service body (e.g. Knapheide, XL, or equivalent) that is constructed of corrosion resistant steel or aluminum? FORMDROPDOWN ; Material

1) If a steel service body is provided describe in detail how it is corrosion resistant?

2) SUPPORTING DOCUMENTATION REQUIRED: A brochure or picture and specification sheet(s) must be provided of the service body. State where this is provided in your proposal (e.g. page number, paragraph, etc.)

(b) Do the compartments on the driver and passenger side of the vehicle face outward? FORMDROPDOWN

1) Number of storage compartments provided?

2) Total area of storage compartments provided?

3) Are the drawers and shelves provided with rubber, foam, or a similar type of lining to prevent tools from moving and rattling during transit? FORMDROPDOWN , if yes, describe:

4) Are all compartment doors lockable and are all locks on the service body identically keyed? FORMDROPDOWN

(c) Is the floor of the cargo area provided with a non-slip surface? FORMDROPDOWN

(d) Are grab handles provided? FORMDROPDOWN

(e) Are all compartments provided with lighting? FORMDROPDOWN

(f) Is a step bumper or other means to gain access to the service body provided? FORMDROPDOWN , if yes, describe:

(g) Is the service body provided with a crane? FORMDROPDOWN , if yes:

1) Manufacturer of crane Model of crane

2) Crane lifting capacity at 5 ft. 8 in. pounds

3) Are outriggers provided to support the crane? FORMDROPDOWN

4) SUPPORTING DOCUMENTATION REQUIRED: A brochure or picture and specification sheet(s) must be provided of the crane. State where this is provided in your proposal (e.g. page number, paragraph, etc.)

(h) Welder provided? FORMDROPDOWN , if yes, Manufacturer Model

1) Push-Pull gun provided? FORMDROPDOWN , if yes, Manufacturer Model

(i) Oxy-Acetylene welding united provided with oxygen tank, acetylene tank, regulators, torch, and tips? FORMDROPDOWN , if yes, Manufacturer Model

(j) Hydraulic powered air compressor provided? FORMDROPDOWN , if yes, Manufacturer Model Comments:

10. RADIO FREQUENCY IDENTIFICATION (RFID) TAGS

(a) Is each vehicle or item and associated lot of spares tagged with a removable active RFID tracking tag? FORMDROPDOWN Manufacturer Model

(b) Will the tag’s electronic format be in compliance with the Joint Total Asset Visibility (JTAV) version 2.0 specifications, section 3.4.1 format? FORMDROPDOWN

(c) Which company or agency will “write to” or “program” the tag?

Comments:

SOURCE SELECTION SENSITIVE, SEE FAR 3.104