Spec_-_Ford_F550_Crew_Cab_4x4_crane_truck.doc

Solicitation Specification (Attachment 0001) March 2019

TRUCK, FORD F550 WITH SERVICE BODY AND CRANE

THE TRUCK SHALL BE PROVIDED WITH ALL NEW PARTS, THE MANUFACTURER’S STANDARD EQUIPMENT, AND THE FOLLOWING MINIMUM EQUIPMENT AND CAPABILITIES:

1. CONFIGURATION

1.1. The vehicle shall be a 4x4 Ford F550, 4 door, Crew Cab chassis cab, export model fitted with service body and crane.

1.2. The vehicle shall be a 2019 model year or later, with no more than 250 miles (402 km) on the odometer.

2. EQUIPMENT

2.1. An ABC type fire extinguisher, minimum 2.2 pound (1.0 kg) capacity, with mounting bracket shall be provided.

2.2. The vehicle shall be provided with a basic safety pack to include at least a first aid kit, three triangles, and tow rope.

2.3. The vehicle shall be provided with a portable 12 volt air compressor kit to include pump, hose, and fittings.

2.4. The vehicle shall be provided with storage to secure the basic safety pack and portable 12 volt air compressor kit.

2.5. Vehicle shall be equipped with exterior back-up alarm.

2.6. Vehicle shall be provided with front and rear tow hooks.

2.7. Vehicle shall be provided with brush guard.

2.8. Operator manual(s) shall be provided with the vehicle, written in English.

2.9. Vehicle shall be provided with orange color emergency lights with controls in cab.

2.10. Vehicle shall be provided with a first aid kit.

2.11. Vehicle shall be provided with spare tire and wheel.

3. DIMENSIONS

3.1. The vehicle wheelbase shall be 203.8 inches (5,176 mm).

4. ENGINE

4.1. The vehicle shall have the 6.7L (408 cu in) Power Stroke V8 turbo diesel engine capable of operating on high sulfur content diesel fuel (5,000 ppm of ½%).

4.2. The vehicle shall have an export engine and not be provided with emission control devices, such as but not limited to the Exhaust Gas Recirculation (EGR) valve, Diesel Particulate Filter (DPF), and Diesel Oxidation Catalyst (DOC).

4.3. High-Sulfur Diesel Modification Package code 98H must be provided.

5. TRANSMISSION

5.1. The vehicle shall be provided with an automatic transmission, 6 speed.

5.2. A manually operated transfer case shall be provided.

5.3. Limited-slip rear axle shall be provided.

6. Steering

6.1. The vehicle shall be left-hand drive.

7. COLOR

7.1. The exterior color of the vehicle will be white.

8. TOWING

8.1. Vehicle shall be provided with a trailer hitch receiver with a pintle with trailer tow package

8.1.1. Pintle shall be compatible with trailer drawbar eye dimensions of 2.0 to 3.0 inches (50.8 to 76.2 mm) loop I.D. and 1.25 to 1.62 inches (31.8 to 41.1 mm) loop cross-section diameter.

8.2. The vehicle shall be provided with the electric trailer brake controller and installed.

9. service body and crane

9.1. The vehicle shall be provided with a service body (e.g. Knapheide, XL, or equivalent) constructed of corrosion resistant steel or aluminum.

9.2. The service body shall have compartments with drawers and shelves on both the passenger and drivers sides of the vehicle that face outward.

9.2.1. Drawers and shelves shall be provided with rubber, foam, or similar type of lining to prevent tools from moving and rattling during transit.

9.2.2. All compartment doors shall be lockable and all locks on the service body shall be identically keyed.

9.3. The floor of the cargo area shall be provided with a non-slip surface.

9.4. The service body shall be equipped with grab handles.

9.5. All service body compartments shall be provided with lighting.

9.6. A step bumper or other means to gain access to the service body shall be provided.

9.7. The service body shall be provided with a crane that has a minimum lifting capacity of 7500 pounds at a distance of 5 ft. 8 in.

9.7.1. The crane shall have a maximum reach of at least 20 ft.

9.7.2. The service body shall have outriggers/downriggers to support the crane.

9.8. A welder, Millermatic 350P (or equivalent) aluminum welder with XR-Aluma Pro 25 foot air cooled gun shall be provided.

9.9. Oxy-Acetylene welding unit including oxygen tank, acetylene tank, regulators, torch, and tips shall be provided.

9.10. 35 cfm hydraulic powered air compressor shall be provided.

10. RADIO FREQUENCY IDENTIFICATION (RFID) TAGS

10.1. Each vehicle or item and associated lot of spares shall be tagged with a removable active RFID data rich tracking tag, specifically designated as either:

10.1.1. Savi ST-654-031

10.1.2. Savi ST-654-041

10.1.3. Identec I-Q310 DRT

10.1.4. Evigia EV3-DRT

10.2. The active RFID tag shall have at least 128 Kbytes of memory.

10.3. The active RFID tag shall be compliant with ISO 18000/7.

10.4. The tag shall be located on the exterior of the vehicle or item in a noticeable and easily observable spot. The tag for the spares shall be located in a noticeable and easily observable spot on the exterior of the pallet or container.

10.5. The tag shall be securely affixed to the vehicle or item in such a way that it cannot fall off. Securing the RFID tag with two or more plastic cable ties is the preferred method.

10.6. The tag data and electronic data field format shall be in accordance with specifications established by Joint Total Asset Visibility (JTAV) version 2.0, section 3.4.1 “Commodity Item Database Format” with the following clarifications:

10.6.1. The “document field” titled “DOCUMENT” shall be the document number (e.g. “milstrip”) as specified by the Government procuring agency.

10.6.2. The “MISC1” field shall be the item serial number, if available.

10.6.3. The “MISC2” field shall be used for user comments (e.g. contract number).