Spec_-_Game_Viewer_Truck.docx

Specification October 2018 Isuzu NPS 300, Game Viewer Truck THE VEHICLE SHALL BE PROVIDED WITH ALL NEW PARTS, MANUFACTURER’S STANDARD EQUIPMENT, AND THE FOLLOWING MINIMUM EQUIPMENT AND CAPABILITIES:

1. CONFIGURATION

1.1. The vehicle shall be a Game Viewer Truck, built on the Isuzu NPS 300 platform.

1.2. The vehicle shall be a 4x4 SWA (Single Wheel Axle), and have a 20 passenger capacity.

1.3. The vehicle (body and chassis) shall be a 2018 model year or later with no more than 250 miles (402 km) on the odometer.

2. SAFETY

2.1. The vehicle shall meet Federal Motor Vehicle Safety Standards (FMVSS), Gulf Cooperation Council (GCC) Standards, Economic Commission for Europe (ECE), European Economic Community (EEC), Australian Design Rules (ADR), or the Japanese Industrial Standard (JIS).

3. EQUIPMENT

3.1. All of the standard equipment typically found on a base Isuzu NPS 300 truck of this type shall be provided.

3.2. Anti-sail mud flaps shall be installed behind all vehicle wheels.

3.3. The vehicle shall be provided with lockable tool box(es) or secured stowage compartment(s), of sufficient capacity to store all manufacturer’s standard equipment and accessories, and items specified below. All locks for the tool box(es) or secured stowage compartment(s) shall be identically keyed for all vehicles.

3.3.1. At a minimum, the vehicle shall be provided with the standard tools required for simple operator level maintenance (wrench and socket set, screwdriver, adjustable wrench, pliers).

3.3.2. The vehicle shall be provided with tire changing tools and a lifting jack, with a minimum capacity of ½ of the Gross Vehicle Weight (GVW).

3.3.3. Three emergency warning triangles shall be provided.

3.3.4. A first aid kit, 25 person, ANSI compliant with at least but not limited to:

3.3.4.1. Bandages, scissors, adhesive tape, tweezers, eye wash, burn cream, cold compresses, anti-biotic cream, assortment of self-adhering band-aids, etc.

3.3.5. A portable air compressor with a chuck to inflate tires, and a pressure gauge shall be provided. The hose and cord shall be of sufficient lengths to inflate all tires on the vehicle.

3.4. Two 5 gallon (or 20 liter) jerry cans shall be provided.

3.4.1. One jerry can shall be labeled “Potable Water Only” in English.

3.4.2. The other jerry can shall be labeled “Diesel Fuel Only” in English.

3.4.3. Stowage space shall be provided for the jerry cans on the vehicle which doesn’t interfere with operations.

3.5. Two frame-mounted tow hooks or eyes shall be provided on the front and two at the rear of the vehicle.

3.6. The vehicle shall be equipped with a tow bar.

3.7. The vehicle shall be equipped with a bull bar.

3.8. The vehicle shall be provided with at least one ABC type fire extinguisher with mounting bracket, minimum 5.5 pound (2.5 kg) capacity and be stored in the cab.

3.9. A self-recovery winch shall be provided with the following features:

3.9.1. Mounted to front of vehicle

3.9.2. 12,000 lb (5,443 kg) minimum capacity (first layer)

3.9.3. 80 ft (24.4 m) minimum cable length

3.9.4. 20% minimum cable safety factor

3.9.5. Equipped with a roller fairlead

3.9.6. A remote control to operate winch functions outside the vehicle

3.10. Language requirements:

3.10.1. All instructions, diagrams, and warning labels on the vehicle shall be in English, or in universal symbols.

3.10.2. A vehicle operator’s manual shall be provided for every vehicle, written in English.

3.10.2.1. All manuals provided shall have an amendment regarding the capacity of the vehicles engine to operate on 500 ppm sulfur diesel fuel.

4. RATINGS

4.1. The vehicle ratings shall be the manufacturer’s published rating at the time of offer.

4.2. All individual components, including engine, transmission, driveline, axles, frame, suspension and tires shall be rated at or above the GVW.

5. ENGINE

5.1. Vehicle shall be equipped with the 148 hp (110 kW) 4 cylinder, 5.2 liter diesel engine, capable of performing as specified herein long-term on 50 ppm sulfur diesel fuel.

5.2. The engine shall have a cooling system and air filter designed for a hot, dusty environment, 120°F (49°C).

6. CHASSIS/DRIVELINE/AXLES/SUSPENSION

6.1. Vehicle shall be provided with a part time 4x4 SWA (Single Wheel Axle) driveline.

6.2. Springs, shocks, and axles provided shall be the heaviest-duty available for this size vehicle.

6.3. A locking or limited-slip differential shall be provided on the rear axle.

7. WEIGHTS/DIMENSIONS

7.1. Vehicle shall have at least 9.25 inches (23.5 cm) of ground clearance.

8. TRANSMISSION

8.1. Vehicle shall be provided with a 5 speed manual transmission.

8.2. The vehicle shall be equipped with a 2-speed transfer case.

9. STEERING

9.1. Vehicle shall be provided with tilt, power steering, and right-hand drive (RHD).

10. ELECTRICAL SYSTEM

10.1. The vehicle shall be equipped with a 24-volt electrical system.

10.2. Dual heavy duty, maintenance free batteries shall be provided.

11. WHEEL ASSEMBLY (TIRE AND WHEEL)

11.1. Vehicle shall be equipped with 10R17.5 tubeless, radial tires.

11.2. All tires shall be of the same size, load rating and tread design, and all wheel assemblies shall be interchangeable, including spare wheel assembly.

12. PERFORMANCE

12.1. Vehicle shall be capable of being stored, started, and operated in temperatures ranging from 20 to 120°F (-7 to 49°C).

12.2. Parking brake shall hold the vehicle at GVW on a 20% longitudinal slope.

12.3. Vehicle shall be capable of maintaining a minimum speed of 55 mph (88 kph) while driving on a level highway, at GVW.

13. CAB

13.1. The two-door day-cab shall be enclosed with seating for the driver and passenger.

13.2. Manufacturer’s heavy duty air conditioning, heating, and defrosting systems shall be provided. The air conditioning system shall be designed for operation in a hot, humid environment 120°F (49°C).

14. GAME VIEWER BODY

14.1. The game viewer body shall be a rear seating area with a half-wall around its perimeter, windowless but open with only structural uprights to support the roof, which covers the entire seating area.

14.2. The game viewer body shall have seating for 20 passengers.

14.3. The seats shall:

14.3.1. Be vinyl upholstered

14.3.2. Have magazine pockets in the backs or sides

14.3.3. Be equipped with lap-type seat belts

14.4. Roll-down canvas flaps shall be installed on the sides of the game viewer body roof.

14.5. At least one side entrance with a step(s) shall be provided on the game viewer body.

14.6. A slanted, non-slip, rubberized floor shall be provided inside the game viewer body.

14.7. A stowage box with rear access shall be installed at the rear of the game viewer body.

14.7.1. Stowage box shall be securable by a padlock, and provided with two keys.

14.8. Lighting shall be provided in the game viewer body capable of illuminating the entire seating area.

15. COLOR

15.1. The exterior color of the vehicle shall be Mala Green, or the manufacturer’s closest equivalent.

16. CORROSION PROTECTION

16.1. The entire vehicle (including the seating area and roof support structure) shall be coated with Carwell (www.carwell.com) or an equivalent type of protection (e.g. coating, e-coat, etc.) to prevent corrosion and rust.

16.1.1. If an equivalent type of corrosion protection product is utilized, the following minimum criteria shall be met:

16.1.1.1. The product shall protect the vehicle from exposure to a salt atmosphere (minimum 336 hours) during open ocean transport.

16.1.1.2. The product shall inhibit vehicle rust and corrosion.

16.1.1.3. The product shall protect the vehicle for a minimum of 1 year after application.

16.1.1.4. The product shall not contain any toxic or harmful materials.

16.1.2. Different types of corrosion protection may be used on different parts of the vehicle.

17. RADIO FREQUENCY IDENTIFICATION (RFID) TAGS

17.1. Each vehicle or item and associated lot of spares shall be tagged with a removable active RFID data rich tracking tag, specifically designated as either:

17.1.1. Savi ST-654-001 (NSN 6350-01-523-1998)

17.1.2. Identec I-Q310 DRT

17.1.3. Savi ST-654-031

17.1.4. Evigia EV3-DRT

17.2. The active RFID tag shall have at least 128 Kbytes of memory.

17.3. The active RFID tag shall be compliant with ANSI standards or ISO 18000/7.

17.4. The tag shall be located on the exterior front of the vehicle and for the spares the tag shall be located on the pallet or container.

17.5. The tag shall be securely affixed to the vehicle or item and associated lot of spares with two or more plastic cable ties.

17.6. The tag data and electronic data field format shall be in accordance with specifications established by Joint Total Asset Visibility (JTAV) version 2.0, section 3.4.1 “Commodity Item Database Format” with the following clarifications:

17.6.1. The “document field” titled “DOCUMENT” shall be the document number (e.g. “milstrip”) as specified by the Government procuring agency.

17.6.2. The “MISC1” field shall be the item serial number, if available.

17.6.3. The “MISC2” field shall be used for user comments (e.g. contract number).