ATTACHMENT_0004_Pickup_Truck_Specification_RHD.docx

Specification December 2017

PICKUP TRUCKS-RIGHT HAND DRIVE:

THE VEHICLE SHALL BE PROVIDED WITH ALL NEW PARTS, MANUFACTURER’S STANDARD EQUIPMENT, AND THE FOLLOWING MINIMUM EQUIPMENT AND CAPABILITIES:

1. CONFIGURATION:

1.1. A commercially available 4x4 light truck, 2017 model year or later, with no more than 100 miles (161 km) on the odometer. The unmodified vehicle shall have the following:

1.1.1. Vehicle wheelbase shall be less than 130 inches (3.3 meters)

1.1.2. Vehicle curb weight shall not exceed 5,500 pounds (2,494 kg).

1.1.3. Four full door cab

1.1.4. Pickup bed shall be at least 4.5 foot (1.37 meters) in length.

1.1.5. Vehicle shall be provided with metric gages.

1.2. The vehicle shall meet Federal Motor Vehicle Safety Standards (FMVSS) or Gulf Cooperation Council (GCC) standards or vehicle safety standards set forth by Economic Commission for Europe (ECE), European Economic Community (EEC), Australian Design Rules (ADR), or the Japanese Industrial Standards (JIS).

2. EQUIPMENT:

2.1. The vehicle shall be provided with all standard equipment and the options specified herein.

2.2. The vehicle shall be provided with in-cab storage provisions of sufficient capacity to store all manufacturer’s standard equipment and accessories, and those specified below (unless otherwise specified):

2.2.1. Standard tools required for simple operator level maintenance (screwdrivers, pliers, hammer, and basic socket and wrench set at a minimum).

2.2.1.1. Tire changing tools and jack.

2.2.1.2. Towing strap.

2.2.1.3. Jumper cables.

2.2.1.4. Shovel.

2.2.1.5. Triangle accident reflector.

2.2.1.6. First aid kit.

2.3. An ABC type fire extinguisher and mounting bracket shall be provided, minimum 2.2 pound (1.0 kg) capacity, and located inside the cab.

2.4. Fog lights.

2.5. Two frame-mounted tow hooks or eyes shall be provided on the front and rear of the vehicle mounted securely to the frame.

2.6. Air conditioning

3. ENGINE:

3.1. The engine shall be capable of performing as specified herein on high sulfur content diesel fuel (5,000 ppm or 1/2%).

4. TRANSMISSION:

4.1. Vehicle shall be available in a manual transmission or an automatic transmission as specificied in the solicitation.

4.2. A driver selectable two-speed transfer case shall be provided.

5. STEERING:

5.1. Vehicle shall be provided with right hand drive.

6. BRAKES:

6.1. Anti-Lock Brake System (ABS) is not required.

7. TIRES:

7.1. Vehicle shall be provided with tubeless, on-off road, with all terrain tread.

7.2. A spare tire and wheel assembly shall be provided, with holder, lock and two keys.

7.3. All tires shall be of the same size, load rating and tread design, and all wheels shall be interchangeable, including spare wheel and tire assembly.

8. COLOR:

8.1. Exterior color of the pickup truck shall be White, color chip 17925 in accordance with FED-STD-595 or manufacturer’s equivalent.

9. RADIO FREQUENCY IDENTIFICATION (RFID) TAGS:

9.1. Each vehicle or item and associated lot of spares shall be tagged with a removable active RFID data rich tracking tag, specifically designated as either:

9.1.1. Savi ST-654-041

9.1.2. Identec I-Q310 DRT

9.1.3. Savi ST-654-031

9.1.4. Evigia EV3-DRT

9.2. The active RFID tag shall have at least 128 Kbytes of memory.

9.3. The active RFID tag shall be compliant ISO 18000/7.

9.4. The tag shall be located on the exterior of the vehicle or item in a noticeable and easily observable spot. The tag for the spares shall be located in a noticeable and easily observable spot on the exterior of the pallet or container.

9.5. The tag shall be securely affixed to the vehicle or item in such a way that it cannot fall off. Securing the RFID tag with two or more plastic cable ties is the preferred method.

9.6. The tag data and electronic data field format shall be in accordance with specifications established by Joint Total Asset Visibility (JTAV) version 2.0, section 3.4.1 “Commodity Item Database Format” with the following clarifications:

9.6.1. The “document field” titled “DOCUMENT” shall be the document number (e.g. “milstrip”) as specified by the Government procuring agency.

9.6.2. The “MISC1” field shall be the item serial number, if available.

9.6.3. The “MISC2” field shall be used for user comments (e.g. contract number).

9.6.4. The JTAV - V2.0 data format specification is available at: http://www.ndia.org/Divisions/Divisions/Logistics/Documents/Content/ContentGroups/Divisions1/Logistics/4RF_Tag_Data_Specification_V2.pdf.