ATTACHMENT_0001_TIQ_Pickup_Truck_LHD.DOCX

TECHNICAL INFORMATION QUESTIONNAIRE

January 2018

FAILURE TO PROVIDE ALL OF THE INFORMATION REQUIRED BELOW MAY RENDER YOUR PROPOSAL INELIGIBLE FOR AWARD

PICKUP TRUCKS-LEFT HAND DRIVE

The purpose of this questionnaire is to determine the suitability of your equipment to satisfy the requirements as stated in the specification. YOU MUST PROVIDE A RESPONSE TO ALL QUESTIONS, BLANKS, AND REQUIRED SUPPPORTING DOCUMENTATION REFERENCES. IF ANY OF YOUR ANSWERS REQUIRE FURTHER EXPLANATION, YOU MUST ALSO INCLUDE THAT IN THE APPLICABLE COMMENT SECTION. Failure to provide a response to all questions may result in the rejection of your proposal.

GENERAL INFORMATION REQUIRED

Personnel Responding to Questionnaire:

Units: The data provided in the TIQ shall be provided in English units, unless otherwise specified. Metric units may be provided if clearly defined and identified.

All written information shall be in English.

In addition to responding to the questions below, the offeror shall provide the following:

(a) Supporting documentation is required, see paragraph 1(a)2

(b) Identification of all modifications or redesigns to the previously manufactured base vehicle necessary to meet the requirements of the specifications. The offeror shall also explain in detail the reasons for the modifications or redesigns.

Informational Notes:

PICKUP TRUCKS-LEFT HAND DRIVE

1. CONFIGURATION

(a) Manufacturer , Model , Year built

1) Is the vehicle provided with all standard equipment?

2) SUPPORTING DOCUMENTATION REQUIRED: A brochure or specification sheet(s) listing all standard equipment found on the vehicle must be provided. State where this is provided in your proposal (e.g. page number, paragraph, etc.)

(b) What is the unmodified curb weight of the OEM vehicle? pounds

(c) Is the vehicle provided with four full doors?

(d) Pickup bed length feet

(e) Does the vehicle meet FMVSS, GCC, ECE, EEC, ADR, or JIS standards? ; if yes which standard does the vehicle meet?

Comments:

2. EQUIPMENT

(a) Front and rear frame mounted hooks or eyes provided and installed: ; Capacity: ; Size: ;

(b) Air conditioning provided?

(c) Fog lights provided?

Comments:

3. ENGINE

(a) Manufacturer: ; Model: ; Type: ;

(b) Can the vehicle be operated on high sulfur content diesel fuel (5,000 ppm or 1/2%)?

(c) If so, please describe any degradation in performance from operation on high sulfur content diesel fuel (5,000 ppm or 1/2%):

(d) Is the vehicle provided with an Exhaust Gas Recirculation (EGR) valve, Diesel Particulate Filter (DPF), Diesel oxidation Catalyst (DOC), Selective Catalytic Reduction Catalyst (SCR) or any other emission control device? , if yes list emission control device(s):

(e) Have any vehicle modifications and/or alterations been made to allow the vehicle to operate on high sulfur content diesel fuel (5,000 ppm or 1/2%)?

1) If so, please list the vehicle modifications and/or alterations:

Comments:

4. TRANSMISSION

(a) If the vehicle available in both a manual or automatic transmission?

(b) Transfer Case:

1) Manufacturer: , Model , Number of speeds:

Comments:

5. STEERING

(a) Is the vehicle available in left hand drive?

Comments:

6. BRAKES

(a) Service:

1) Front: Type - ; Size: . Rear: Type - ; Size: .

Comments:

7. TIRES

(a) Are all tires and rim assemblies interchangeable, including spare?

(b) Tires:

1) Are all tires tubeless, on-off road with all terrain tread?

2) Manufacturer: Model: ; Size: ; Load rating: ; Tread design: ; Type: ; Construction: .

(c) Rims:

1) Manufacturer: ; Model: ; Type: ; Material: ; Size: ; Load rating: .

Comments:

8. COLOR

(a) Is the exterior color of the pickup truck white?

Comments:

SOURCE SELECTION SENSITIVE, SEE FAR 3.104