Spec_-_Crash_Rescue_Vehicle_2016.doc

Solicitation

Attachment 0003 Amendment 0001 Specification

August 2016

CRASH RESCUE VEHICLE, AIRPORT

THE VEHICLE SHALL BE PROVIDED WITH ALL NEW PARTS, THE MANUFACTURER’S STANDARD EQUIPMENT, AND THE FOLLOWING MINIMUM EQUIPMENT AND CAPABILITIES:

1. CONFIGURATION

1.1. The vehicle shall be an Airport Crash Rescue Vehicle (Rapid Intervention Vehicle (RIV)), 2016 model year or later.

1.1.1. The vehicle shall be a pickup-based 4 door, with single front tires and double rear tires (dually rear axle configuration).

1.2. The vehicle shall be capable of rapid arrival to airport crash scenes, providing firefighting and victim rescue capabilities.

1.3. The vehicle shall be provided with less than 500 miles (805 km) on the odometer.

1.4. The vehicle shall comply with International Civil Aviation Organization (ICAO) standards.

2. EQUIPMENT

2.1. The vehicle shall be equipped with all standard equipment and the options specified herein.

2.2. The vehicle shall be provided with a lockable toolbox(es) or secured stowage compartment(s) that are environmentally sealed.

2.2.1. All locks for the toolbox (es) and stowage compartment(s) shall be identically keyed for all vehicles. A minimum of two keys shall be provided with each toolbox or secured stowage compartment.

2.2.2. The tool box(es) and stowage compartments shall be provided with the following tools at a minimum:

2.2.2.1. Standard tools required for simple operator level maintenance (wrench and socket set, screwdrivers, adjustable wrench, pliers, and hammer at a minimum).

2.2.2.2. Tire changing tools.

2.2.2.3. Lifting jack with a minimum capacity of 1/2 Gross Vehicle Weight (GVW).

2.2.2.4. Portable air compressor, tire inflating hose with quick-connect fittings on both ends (of sufficient length to inflate all tires on the vehicle), chuck (capable of filling inner rear tires as well as the other tires on the vehicle), and a pressure gauge.

2.3. The vehicle shall be equipped with a self-recovery winch.

2.3.1. 12,000 lb (5,443 kg) capacity (first layer).

2.3.2. 100 foot (30.5 m) cable length minimum.

2.3.3. 50% cable safety factor.

2.3.4. Equipped with roller fairlead.

2.3.5. Mounted to front bumper.

2.3.6. Ability to operate outside of vehicle with remote control.

2.4. Front and rear wheels shall have anti-sail mud flaps.

2.5. The vehicle shall be equipped with a combination bull bar or brush guard.

2.6. The vehicle shall be provided with two front and two rear frame-mounted tow hooks or eyes.

2.7. Language requirements:

2.7.1. All instruction diagrams and warning labels shall be in both Bulgarian and English, or in universal symbols, and shall be permanently affixed to the vehicle.

2.7.2. Fuel filler cap or area close to the filler door shall be labeled with the type of fuel compatible with the vehicle in both Bulgarian and English, or in universal symbols.

2.7.3. A manual(s) shall be provided for every vehicle written in both Bulgarian and English.

3. RATINGS, WEIGHTS, AND DIMENSIONS

3.1. Vehicle ratings shall be the manufacturer’s published rating at the time of offer.

3.2. All individual components, including engine, transmission, driveline, frame, brakes, axles, suspension and tires shall be rated at or above the GVW.

4. CHASSIS

4.1. A 4x4 driveline shall be provided.

4.2. A lockable or limited slip differential shall be provided on the rear axle.

4.2.1. If a lockable differential is provided, it shall be engaged automatically or by the driver without leaving the driver’s position.

5. ENGINE

5.1. The vehicle shall be provided with a diesel engine able to operate as specified herein on the fuel available in Bulgaria.

6. TRANSMISSION

6.1. The vehicle shall be provided with an automatic transmission.

7. STEERING

7.1. Left-hand drive and power steering shall be provided.

8. BRAKES

8.1. The vehicle shall be provided with service brakes which include an Anti-lock Brake System (ABS).

9. WHEEL ASSEMBLY (TIRE AND WHEEL)

9.1. Vehicle shall be provided with tubeless, on-off road radial tires.

9.2. All tires shall be of the same size, load rating and tread design, and all wheels shall be interchangeable, including spare wheel and tire assembly.

9.3. A full size spare tire and wheel assembly with holder shall be provided.

10. ELECTRICAL SYSTEM

10.1. The vehicle shall be provided with the chassis OEM’s heaviest-duty alternator, and dual, heavy-duty, maintenance-free batteries.

10.2. The vehicle shall be provided with an emergency warning light package consisting of either:

10.2.1. A light bar permanently mounted to the top of the cab, or roof of body, with at least two yellow rotating warning lights (halogen, light emitting diode, or strobe-type).

10.2.2. Two yellow beacons permanently mounted to the top of the cab, or roof of body, (halogen, light emitting diode, or strobe-type).

10.3. The vehicle shall be provided with a siren and a Public Address (PA) system.

10.4. The vehicle shall be provided with back-up lights and an alarm.

10.5. A dedicated 20 amp circuit for radio communications equipment shall be provided in the cab.

10.6. The vehicle shall have shoreline hookup capability.

10.6.1. The vehicle shall have cab and compartment receptacles equipped with shore power.

10.7. The vehicle shall be equipped with the appropriate battery chargers for all the battery powered equipment and tools.

11. PERFORMANCE

11.1. The vehicle shall be capable of being stored, started, and operated in temperatures ranging from 10 to 110 °F (‑12 to 43 °C).

11.2. The vehicle shall be capable of operating 40% of mission on sandy roads and trails, 50% on paved roads, and 10% off-road.

12. COLOR AND DECALS

12.1. The exterior color of the vehicle (including at a minimum, the cab) shall be Red, FED-STD-595 color chip 11105 or the manufacturer’s closest equivalent.

12.2. Decals saying “RESCUE” shall be placed on both sides of the cab and on either the hood or roof of the vehicle.

12.2.1. The language of the word “RESCUE” shall be in Bulgarian.

13. CAB

13.1. The cab shall accommodate the driver and three passengers.

13.2. The manufacturer’s heavy-duty air conditioning, heating, and defrosting systems shall be provided.

14. BODY AND FIRE-FIGHTING SYSTEM

14.1. Body requirements:

14.1.1. External storage compartments with roll-up doors on both sides of the vehicle for equipment storage. Compartments shall be:

14.1.1.1. Lighted.

14.1.1.2. Water-resistant.

14.1.1.3. Provided with multiple shelving and equipment mounts.

14.1.1.4. Lockable, and identically keyed for all compartments. A minimum of 4 keys shall be provided.

14.1.2. Work-scene lights shall be mounted on top of both sides of the body for nighttime operations.

14.1.2.1. A minimum of 4 lights shall be provided.

14.1.2.2. At least 2 shall be on each side.

14.1.3. Roof-access ladder permanently mounted onto the back or side of the body.

14.2. Fire-fighting system minimum requirements:

14.2.1. Tanks:

14.2.1.1. Water – 200 gallons (757 liters)

14.2.1.2. Foam – 40 gallons (151 liters)

14.2.2. Onboard centrifugal pump.

14.2.2.1. Minimum 250 GPM (946 LPM).

14.2.2.2. Pump and roll capability.

14.2.3. A bumper-mounted monitor, powered by the pump, for propelling water and foam.

14.2.4. Fire hose capable of manually dispensing water and foam.

14.2.4.1. Minimum 100 ft (30.5 m) long.

14.2.4.2. Reel (with power rewind).

14.3. Controls:

14.3.1. All controls and control panels shall be in lighted enclosures or individually lit for nighttime operations.

14.3.2. All controls shall be marked in Bulgarian and English, or labeled in universal symbols.

15. MOBILE FIRE-FIGHTING AND RESCUE EQUIPMENT

15.1. The Crash Rescue Vehicle shall be provided with the following equipment and appropriate space for stowage:

15.1.1. Rescue disc saw with:

15.1.1.1. A rotary blade suitable for cutting through aluminum and other aircraft metals.

15.1.1.2. A 2-stroke engine, fueled by premixed gas and oil.

15.1.1.3. A gas can labeled “Premixed Gas and Oil” in Bulgarian and English, for extra fuel.

15.1.1.4. Three extra blades.

15.1.1.5. Dedicated stowage compartment(s) on the vehicle for the saw, extra blades, and gas can.

15.1.2. Combination tool:

15.1.2.1. Cutting and spreading capabilities

15.1.2.2. Maximum cutting opening at least 6 inches (15.2 cm)

15.1.2.3. Spreading distance of at least 10 inches (25.4 cm)

15.1.2.4. Self-contained and portable system

15.1.3. Telescopic Ram:

15.1.3.1. Retracted length no more than 13 in (33 cm)

15.1.3.2. Extended length of at least 22 in (55.9 cm)

15.1.3.3. Self-contained and portable system

15.1.3.4. Hydraulic hose(s):

15.1.3.4.1. NFPA conforming

15.1.3.4.2. Minimum 25 ft (7.62 m) length

15.1.3.4.3. Quick connectors on each end

15.1.4. Ladder:

15.1.4.1. Aluminum

15.1.4.2. Either an extending type, or combined folding and extending type

15.1.4.3. Adjustable length from 5 ft (1.2 m) maximum to 20 ft (6.1 m) minimum

15.1.4.4. Weight: 50 lbs (22.7 kg) maximum

15.1.4.5. Provisions for stowing the ladder on the roof of the body

15.1.5. Two mobile scene lights:

15.1.5.1. LED type lights

15.1.5.2. Powered by rechargeable batteries

15.1.5.3. Mounted on telescoping stands

15.1.6. Three SCBA gear sets including:

15.1.6.1. Six tanks total (including 3 spare)

15.1.6.1.1. 30 minutes capacity each

15.1.6.2. Breathers

15.1.6.3. Regulators and hoses

15.1.6.4. Harnesses and mounting plates

15.1.7. High pressure lifting bag:

15.1.7.1. Capable of being filled by SCBA tanks

15.1.7.2. Maximum height deflated: 1.5 inches (3.8 cm)

15.1.7.3. Minimum height inflated: 8 inches (20.3 cm)

15.1.7.4. Minimum lifting force 10 tons (9,072 kg)

15.1.8. Medical first aid kit including:

15.1.8.1. Burn kit

15.1.8.2. Two oxygen inhalers

15.1.9. Fire blanket, woolen, with storage pouch

15.1.10. One 20 lb (9 kg) ABC extinguisher

15.1.11. One 20 lb (9 kg) CO2 extinguisher

15.1.12. Assorted rescue tools, hand tools and equipment including:

15.1.12.1. Rescue grab hook, minimum 10 ft (3.1 m) length

15.1.12.2. Seat belt cutter with DZUS key and 2 replacement blades

15.1.12.3. Axe, large non-wedge, rescue type

15.1.12.4. Axe, small non-wedge, rescue type

15.1.12.5. Two crowbars, 3 ft (91 cm) and 5 ft (1.5 m)

15.1.12.6. Rope, 50 ft (15.2 m) length, NFPA approved

15.1.12.7. Rope, 100 ft (30.1 m) length, NFPA approved

15.1.12.8. Wire cutters

15.1.12.9. Bolt cutters

15.1.12.10. Hammer, 4 lb (1.8 kg)

15.1.12.11. Chisel, cold 5/8 inch (16 mm)

15.1.12.12. Heavy duty hack saw, with 2 spare blades

15.1.12.13. Adjustable wrench, 12 inch (30.5 cm)

15.1.12.14. Side cutting pliers, 7 inch (17.8 cm)

15.1.12.15. Slip joint pliers, 10 inch (25.4 cm)

15.1.12.16. Tin snips

15.1.12.17. Screwdrivers, 8 piece assorted set

15.1.13. Instruction diagrams and warning labels for the equipment listed above shall be written in both Bulgarian and English, or in universal symbols.

16. RADIO FREQUENCY IDENTIFICATION (RFID) TAGS

16.1. Each vehicle or item and associated lot of spares shall be tagged with a removable active RFID data rich tracking tag, specifically designated as either:

16.1.1. Savi ST-654-041

16.2. The tag shall be located on the exterior of the vehicle or item in a noticeable and easily observable spot. The tag for the spares shall be located in a noticeable and easily observable spot on the exterior of the pallet or container.

16.3. The tag shall be securely affixed to the vehicle or item in such a way that it cannot fall off. Securing the RFID tag with two or more plastic cable ties is the preferred method.

16.4. The tag data and electronic data field format shall be in accordance with specifications established by Joint Total Asset Visibility (JTAV) version 2.0, section 3.4.1 “Commodity Item Database Format” with the following clarifications:

16.4.1. The “document field” titled “DOCUMENT” shall be the document number (e.g. “milstrip”) as specified by the Government procuring agency.

16.4.2. The “MISC1” field shall be the item serial number, if available.

16.4.3. The “MISC2” field shall be used for user comments (e.g. contract number).

16.4.3.1. The JTAV - V2.0 data format specification is available at:

http://www.ndia.org/Divisions/Divisions/Logistics/Documents/Content/ContentGroups/Divisions1/Logistics/4RF_Tag_Data_Specification_V2.pdf