W52P1J19R0054-KO_signed.pdf

SOLICITATION, OFFER AND AWARD 1. This Contract Is A Rated Order Under

DPAS (15 CFR 700)

Rating Page of Pages

2. Contract Number 3. Solicitation Number 4. Type of Solicitation 5. Date Issued 6. Requisition/Purchase Number Sealed Bid (IFB) Negotiated (RFP)

7. Issued By Code 8. Address Offer To (If Other Than Item 7)

NOTE: In sealed bid solicitations ‘offer’ and ‘offeror’ mean ‘bid’ and ‘bidder’.

SOLICITATION

9. Sealed offers in original and copies for furnishing the supplies or services in the Schedule will be received at the place specified in item 8, or if handcarried, in the depository located in until (hour) local time (Date).

Caution - Late Submissions, Modifications, and Withdrawals: See Section L, Provision No. 52.214-7 or 52.215-1. All offers are subject to all terms and conditions contained in this solicitation.

10. For Information A. Name B. Telephone (No Collect Calls) C. E-mail Address

Call: Area Code Number Ext.

11. Table Of Contents

(X) Sec. Description Page(s) (X) Sec. Description Page(s)

Part I - The Schedule Part II - Contract Clauses A Solicitation/Contract Form I Contract Clauses B Supplies or Services and Prices/Costs Part III - List Of Documents, Exhibits, And Other Attach.

C Description/Specs./Work Statement J List of Attachments D Packaging and Marking Part IV - Representations And Instructions E Inspection and Acceptance K Representations, Certifications, and F Deliveries or Performance Other Statements of Offerors G Contract Administration Data L Instrs., Conds., and Notices to Offerors H Special Contract Requirements M Evaluation Factors for Award

OFFER (Must be fully completed by offeror) NOTE: Item 12 does not apply if the solicitation includes the provisions at 52.214-16, Minimum Bid Acceptance Period.

12. In compliance with the above, the undersigned agrees, if this offer is accepted within _____ calendar days (60 calendar days unless a different period is inserted by the offeror) from the date for receipt of offers specified above, to furnish any or all items upon which prices are offered at the price set opposite each item, delivered at the designated point(s), within the time specified in the schedule.

13. Discount For Prompt Payment 10 Calendar Days (%) 20 Calendar Days (%) 30 Calendar Days (%) Calendar Days (%) (See Section I, Clause No. 52.232-8)

14. Acknowledgment of Amendments (The offeror acknowledges Amendment No. Date Amendment No. Date receipt of amendments to the SOLICITATION for offerors and related documents numbered and dated):

15A. Name and Code Facility 16. Name and Title of Person Authorized to Sign Offer Address of (Type or Print) Offeror

15B. Telephone Number 15C. Check if Remittance Address is 17. Signature 18. Offer Date Area Code Number Ext. Different From Above – Enter such

Address In Schedule

AWARD (To be completed by Government)

19. Accepted As To Items Numbered 20. Amount 21. Accounting And Appropriation

22. Authority For Using Other Than Full And Open Competition: 23. Submit Invoices To Address Shown In Item 10 U.S.C. 2304(c)( ) 41 U.S.C. 253(c)( ) (4 copies unless otherwise specified)

24. Administered By (If other than Item 7) Code 25. Payment Will Be Made By Code

26. Name of Contracting Officer (Type or Print) 27. United States Of America 28. Award Date

(Signature of Contracting Officer)

IMPORTANT - Award will be made on this Form, or on Standard Form 26, or by other authorized official written notice.

AUTHORIZED FOR LOCAL REPRODUCTION Standard Form 33 (Rev. 9-97) Previous edition is unusable Prescribed By GSA-FAR (48 CFR) 53.214(c)

W52P1J-19-R-0054 X

2019JUN06

2019JUN2104:00pm

DOA6

2019JUN06 SEE SCHEDULE

W52P1J

ARMY CONTRACTING COMMAND - RI

ROCK ISLAND, IL 61299-8000

BLDGS 60 & 62

ASHLEY L. GRIFFIN

(309)782-5445

CCRC-TB

ASHLEY.L.GRIFFIN20.CIV@MAIL.MIL

1 73

X 1

X 4 X 32

X 33 X 34

X 39

X 41

X 42

X 54

X 55

X 69

X 73

Trisha M.ariman

CONTINUATION SHEET

Reference No. of Document Being Continued Page of

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

SECTION A - SUPPLEMENTAL INFORMATION

Buyer Name: ASHLEY L. GRIFFIN

Buyer Office Symbol/Telephone Number: CCRC-TB/(309)782-5445

Type of Contract 1: Firm Fixed Price

Kind of Contract: Supply Contracts and Priced Orders

*** End of Narrative A0000 ***

This Executive Summary is provided as a synopsis of important and relevant features of this solicitation. If conflict exists between this summary and the provisions of the solicitation, the provisions of the solicitation govern.

1. Army Contracting Command-Rock Island (ACC-RI) has a commercial requirement for Automatic Identification Technology (AIT-6) technology, data communications, hardware, software, documentation, and incidental services, to include technical engineering services

(TES), training, and warranty, to achieve an integrated structure for authorized users worldwide. This acquisition, named "AIT-6", is a _____ follow-on to the current AIT-V Multiple Award Indefinite Delivery Indefinite Quantity (IDIQ) contracts.

2. This requirement is being solicited as a full and open competition and any qualified vendor, regardless of size or status, may submit a proposal.

3. Awards will be made to the Lowest Price Technically Acceptable Offeror(s) using the criteria established in Section M, "Evaluation

Factors for Award" (Sect. J, Attachment 0005). The evaluation of proposals and subsequent source selection for award will be conducted

IAW Sections L and M of this solicitation (Section J, Attachments 0004 and 0005).

4. The Government anticipates awarding up to three (3), Firm Fixed Price (FFP), IDIQ contracts from this solicitation. These contracts will have reimbursable Contract Line Item Numbers (CLINs) for Other Direct Costs and Travel. The Government reserves the right to make no award or less than three awards.

5. The anticipated Period of Performance is:

Base Ordering Period: 36 months from date of award

Option Period 1 (if exercised): 12 months

Option Period 2 (if exercised): 12 months

6. The maximum value for the entire procurement is $48,100,712.00. There is no guarantee that the Government will order, in combination of all awardees, the maximum value under this procurement. An award under this solicitation in no way obligates the Government to place additional orders beyond the guaranteed minimum amount.

7. A delivery order will be issued at time of contract award in the amount of the guaranteed minimum dollar value of $25,000. A specific list of products will be determined prior to contract award.

8. The Contract Line Item Number (CLIN)/Sub-contract Line Item Number (SLIN) structure for this solicitation is outlined in Section B, Supplies or Services and Prices/Costs and in the "Price Model" (Sect. J, Attachment 0003) of this solicitation. For proposal purposes, Offeror(s) shall enter proposed prices in the "Price Model" (Sect. J, Attachment 0003) of the Solicitation.

9. The NAICS code is 334111 for this acquisition. ____________________

10. The closing date and time to submit a proposal is as follows:

Closing Date: 21 June 2019

Closing Time: 3:00PM (Central Time)

11. This solicitation should NOT be discussed with any Government employee except the ACC-RI Contracting Officer, Ms. Trisha Mariman or __________

Contract Specialist, Ms. Ashley Griffin. Failure to adhere to this restriction may be grounds to declare your firm ineligible for consideration of any award resulting from this competitive acquisition.

12. Any additional and or future information regarding this solicitation, including questions and answers, will be posted to Federal

Business Opportunities website at www.fbo.gov under solicitation W52P1J-19-R-0054.

2 73

W52P1J-19-R-0054

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

*** END OF NARRATIVE A0001 ***

3 73

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

SECTION B - SUPPLIES OR SERVICES AND PRICES/COSTS

SUMMARY OF CLIN STRUCTURE IS AS FOLLOWS:

BASE CLINS - YEARS 1-3______________________

HARDWARE:

0001 Hand Held Barcode Reader

0003 Barcode Imagers for PC Input

0005 Barcode Printers

0007 IUID Marking Equipment and Verifiers

0009 Wireless Radio Frequency Data Communications

0011 Transit Cases and Transit Case Configuration

SOFTWARE:

0013 Software

DELIVERY:

0015 Expedited Delivery for Hardware and Software

LABOR:

0017 Technical Engineering Services (TES)

OTHER DIRECT COSTS:

0021 Incidental Materials (as it relates to TES)

0023 Contract Manpower Reporting (CMR)/Not Separately Priced (NSP)/Army Services Requirement

0027 Travel and Per Diem (as it relates to TES)

OPTION PERIOD CLINS - Option Period 1 (IF EXERCISED)____________________________________________________

HARDWARE:

1001 Hand Held Barcode Reader

1003 Barcode Imagers for PC Input

1005 Barcode Printers

1007 IUID Marking Equipment and Verifiers

1009 Wireless Radio Frequency Data Communications

1011 Transit Cases and Transit Case Configuration

SOFTWARE:

1013 Software

DELIVERY:

1015 Expedited Delivery for Hardware and Software

LABOR:

1017 Technical Engineering Services (TES)

OTHER DIRECT COSTS:

1021 Incidental Materials (as it relates to TES)

1023 Contract Manpower Reporting (CMR)/Not Separately Priced (NSP)/Army Services Requirement

1027 Travel and Per Diem (as it relates to TES)

OPTION PERIOD CLINS - Option Period 2(IF EXERCISED)___________________________________________________

HARDWARE:

2001 Hand Held Barcode Reader

2003 Barcode Imagers for PC Input

2005 Barcode Printers

2007 IUID Marking Equipment and Verifiers

2009 Wireless Radio Frequency Data Communications

2011 Transit Cases and Transit Case Configuration

SOFTWARE:

2013 Software

4 73

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

DELIVERY:

2015 Expedited Delivery for Hardware and Software

LABOR:

2017 Technical Engineering Services (TES)

OTHER DIRECT COSTS:

2021 Incidental Materials (as it relates to TES)

2023 Contract Manpower Reporting (CMR)/Not Separately Priced (NSP)/Army Services Requirement

2027 Travel and Per Diem (as it relates to TES)

*** END OF NARRATIVE B0002 ***

5 73

PIIN/SIIN

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

0001 HANDHELD BARCODE READER _______________________

***Offerors shall submit Prices in the "Price Model" ___________

(Sect. J, Attachment 0003) of the Solicitation.

All Prices are FFP. Hardware and Software are FOB

Destination***

0001AA Hand Held Barcode Terminal A (HHT-A)

Large Display, Integrated Imager, and Full

Alphanumeric Keypad Capability. FOB Destination

0001AB HHT-A warranty upgrade to add 2 years

(total 5 year warranty). FOB Destination

0001AC HHT-A Holster and Shoulder Strap. FOB

Destination

0001AD HHT-A Rechargeable Battery (1EA). FOB

Destination

0001AE HHT-A Multiple (2) Battery Charger. FOB

Destination

0001AF HHT-A Single Battery Charger / Docking

Station. FOB Destination

0001AG HHT-A One pack of (1) tethered replacement styli. FOB Destination

0001AH HHT-A Transparent screen protector. FOB

Destination

0001AJ HHT-A portable printer interface connection and cable. FOB Destination

0001AK HHT-A Detachable hand strap. FOB

Destination

0001AM HHT-A Carrying Case. FOB Destination

0001BA Hand Held Barcode Terminal B (HHT-B)

Small Display, Integrated Imager, and Full Alpha-numeric Keypad Capability. FOB Destination

0001BB HHT-B warranty upgrade to add 2 years

(total 5 year warranty). FOB Destination

6 73

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

0001BC HHT-B Holster and Shoulder Strap. FOB

Destination

0001BD HHT-B Rechargeable Battery (1EA). FOB

Destination

0001BE HHT-B Multiple (2) Battery Charger. FOB

Destination

0001BF HHT-B Single Battery Charger / Docking

Station. FOB Destination

0001BG HHT-B One pack of (1) tethered replacement styli. FOB Destination

0001BH HHT-B Transparent screen protector. FOB

Destination

0001BJ HHT-B portable printer interface connection and cable. FOB Destination

0001BK HHT-B Detachable hand strap. FOB

Destination

0001BM HHT-B Carrying Case. FOB Destination

0001CA Hand Held Barcode Terminal C (HHT-C), Large Display, Integrated Imager, and Full Alpha-numeric Keypad Capability. FOB Destination

0001CB HHT-C warranty upgrade to add 2 years

(total 5 year warranty). FOB Destination

0001CC HHT-C Holster and Shoulder Strap. FOB

Destination

0001CD HHT-C Rechargeable Battery (1EA). FOB

Destination

0001CE HHT-C Multiple (2) Battery Charger. FOB

Destination

0001CF HHT-C Single Battery Charger / Docking

Station. FOB Destination

0001CG HHT-C One pack of (1) tethered

7 73

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

replacement styli. FOB Destination

0001CH HHT-C Transparent screen protector. FOB

Destination

0001CJ HHT-C portable printer interface connection and cable. FOB Destination

0001CK HHT-C Detachable hand strap. FOB

Destination

0001CM HHT-C Carrying Case. FOB Destination

0001DA Hand Held Barcode Terminal D (HHT-D)

Small Display, Integrated Imager, Full Alphanumeric

Keypad Capability and NI certified. FOB Destination

0001DB HHT-D warranty upgrade to add 2 years

(total 5 year warranty). FOB Destination

0001DC HHT-D Holster and Shoulder Strap. FOB

Destination

0001DD HHT-D Rechargeable Battery (1 EA). FOB

Destination

0001DE HHT-D Multiple (2) Battery Charger. FOB

Destination

0001DF HHT-D Single Battery Charger / Docking

Station. FOB Destination

0001DG HHT-D One pack of (1) tethered replacement styli. FOB Destination

0001DH HHT-D Transparent screen protector. FOB

Destination

0001DJ HHT-D portable printer interface connection and cable. FOB Destination

0001DK HHT-D Detachable hand strap. FOB

Destination

0001DM HHT-D Carrying Case. FOB Destination

8 73

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

0001EA Hand Held Barcode Terminal E (HHT-E)

Small Display, Integrated Imager, Full Alphanumeric

Keypad Capability, NI certified, and Pistol Grip

Handle. FOB Destination

0001EB HHT-E warranty upgrade to add 2 years

(total 5 year warranty). FOB Destination

0001EC HHT-E Holster and Shoulder Strap. FOB

Destination

0001ED HHT-E Rechargeable Battery (1EA). FOB

Destination

0001EE HHT-E Multiple (2) Battery Charger. FOB

Destination

0001EF HHT-E Single Battery Charger / Docking

Station. FOB Destination

0001EG HHT-E One pack of (1) tethered replacement styli. FOB Destination

0001EH HHT-E Transparent screen protector. FOB

Destination

0001EJ HHT-E portable printer interface connection and cable. FOB Destination

0001EK HHT-E Detachable hand strap. FOB

Destination

0001EM HHT- E Carrying Case. FOB Destination

(End of narrative B001)

0003 BARCODE IMAGERS FOR PC INPUT ____________________________

0003AA Imager for PC Input - General Bar Code

(Tethered). FOB Destination

0003AB Imager for PC Input - General Bar Code

(Bluetooth). FOB Destination

9 73

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

0003AC Imager for PC Input - IUID Label Markings.

FOB Destination

0003AD Imager for PC Input - IUID Direct Part

Markings. FOB Destination

0003AE Imager for PC Input - Extended Read Range

(Tethered). FOB Destination

(End of narrative B001)

0005 BARCODE PRINTERS ________________

0005AA Portable/Wearable Bar Code Label Printer.

FOB Destination

0005AB RESERVED

0005AC Battery Charger for Portable/Wearable BC

Label Printer. FOB Destination

0005AD Carrying Case with Strap for

Portable/Wearable BC Label Printer. FOB Destination

0005AE 4" x 6 " Label-Portable/Wearable BC Label

Printer (6 rolls). FOB Destination

0005BA Stationary Bar Code Label Printer. FOB

Destination

0005BB Stationary Bar Code Label Printer, with

Installed Take-Up Reel. FOB Destination

0005BC Roll of 4" by 6" Synthetic Label Stock (8 inch diameter roll) for Stationary BC Label Printer

(6 rolls). FOB Destination

0005BD Roll of 4" by 3" Synthetic Label Stock (8 inch diameter roll) for Stationary BC Label Printer

(6 rolls). FOB Destination

0005BE Resin Ribbon for 4" Width Labels for

Stationary BC Label Printer. FOB Destination

10 73

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

(End of narrative B001)

0007 IUID MARKING EQUIPMENT AND VERIFIERS ____________________________________

0007AA Laser Marking Equipment. FOB Destination

0007AB Adhesive film stock (25 sheets). FOB

Destination

0007AC Desktop Verifier for Labels. FOB

Destination

(End of narrative B001)

0009 WIRELESS RADIO FREQUENCY DATA COMMUNICATIONS ____________________________________________

0009AA Radio Frequency Access Point (Indoor

Environment). FOB Destination

0009AB Radio Frequency Access Point (NEMA). FOB

Destination

0009AC Radio Frequency Access Point (Office

Environment). FOB Destination

0009AD Radio Frequency Gateway. FOB Destination

(End of narrative B001)

0011 TRANSIT CASES AND TRANSIT CASE CONFIGURATION ____________________________________________

0011AA Transit Case Configuration, Small Arms

Room Kit. FOB Destination

(End of narrative B001)

11 73

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

0013 SOFTWARE ________

0013AA Bar Code Label Design and Printing

Software. FOB Destination

0013AB Small Arms Room Management Software. FOB

Destination

(End of narrative B001)

0015 EXPEDITED DELIVERY FOR HARDWARE AND SOFTWARE ____________________________________________

0015AA Expedited delivery CONUS.

0015AB Expedited delivery OCONUS.

FOB Destination

(End of narrative B001)

0017 TECHNICAL ENGINEERING SERVICES ______________________________

This CLIN series provides AIT-6 Technical

Engineering Services (TES) on a Firm Fixed Price basis in accordance with the AIT-6 "Performance ___________

Work Statement (PWS)" (Sect. J, Attachment 0001).____________________

SECURITY CLASS: Determined at Task Order Level

CLAUSES: Additional clauses required to perform

OCONUS shall be added at the Task Order level.

Specific requirements and pricing shall be set forth under individual Task Orders.

Pricing will be based on the established price model.

Inspection, Acceptance, and FOB Point shall be specified by incorporating the appropriate clauses from Sections E and F on each individual Task Order.

Delivery and Period of Performance Schedule(s) shall

12 73

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

be determined on each individual Task Order.

Individual TES CLINs/SLINs to be assigned at Task

Order Level.

TES projects may include a combination of the following listed Labor Categories:

0017AA Project Manager.

0017AB Instructional Design and Development

Specialist.

0017AC Senior Programmer.

0017AD Systems Analyst.

0017AE Software Systems Engineer.

0017AF Programmer/Analyst.

0017AG Junior Programmer.

0017AH Systems Engineer.

0017AJ Data Comm/Network Specialist.

0017AK RF Technical Radio Specialist.

0017AM Technical Training Specialist.

0017AN Technical Writer.

(End of narrative B001)

0021 INCIDENTAL MATERIALS ____________________

0021AA Incidental Materials IAW the Performance

Work Statement (PWS) (Sect. J, Attachment 0001).

(End of narrative B001)

13 73

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

0023 CONTRACTOR MANPOWER REPORTING _____________________________

0023AA Contractor Manpower Reporting - Not

Separately Priced (NSP).

(End of narrative B001)

0027 TRAVEL ______

***Travel CLINs are not to be priced by Offeror. In _______ order to have consistency between Offerors, the

Government has already pre-filled a fixed dollar amount with the "Price Model" (Sect. J, Attachment ____________

0003).

0027AA Travel IAW the Performance Work Statement

(PWS) (Sect. J, Attachment 0001).

0027AB Per Diem IAW the Performance Work

Statement (PWS) (Sect. J, Attachment 0001).

(End of narrative B001)

1001 HAND HELD BARCODE READER ________________________

***Offerors shall submit Prices in the "Price Model" ___________

(Sect. J, Attachment 0003) of the Solicitation.

All Prices are FFP. Hardware and Software are FOB

Destination***

1001AA Hand Held Barcode Terminal A (HHT-A)

Large Display, Integrated Imager, and Full

Alphanumeric Keypad Capability. FOB Destination

1001AB HHT-A warranty upgrade to add 2 years

(total 5 year warranty). FOB Destination

1001AC HHT-A Holster and Shoulder Strap. FOB

14 73

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

Destination

1001AD HHT-A Rechargeable Battery (1EA). FOB

Destination

1001AE HHT-A Multiple (2) Battery Charger. FOB

Destination

1001AF HHT-A Single Battery Charger / Docking

Station. FOB Destination

1001AG HHT-A One pack of (1) tethered replacement styli. FOB Destination

1001AH HHT-A Transparent screen protector. FOB

Destination

1001AJ HHT-A portable printer interface connection and cable. FOB Destination

1001AK HHT-A Detachable hand strap. FOB

Destination

1001AM HHT-A Carrying Case. FOB Destination

1001BA Hand Held Barcode Terminal B (HHT-B)

Small Display, Integrated Imager, and Full Alpha-numeric Keypad Capability. FOB Destination

1001BB HHT-B warranty upgrade to add 2 years

(total 5 year warranty). FOB Destination

1001BC HHT-B Holster and Shoulder Strap. FOB

Destination

1001BD HHT-B Rechargeable Battery (1EA). FOB

Destination

1001BE HHT-B Multiple (2) Battery Charger. FOB

Destination

1001BF HHT-B Single Battery Charger / Docking

Station. FOB Destination

1001BG HHT-B One pack of (1) tethered replacement styli. FOB Destination

15 73

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

1001BH HHT-B Transparent screen protector. FOB

Destination

1001BJ HHT-B portable printer interface connection and cable. FOB Destination

1001BK HHT-B Detachable hand strap. FOB

Destination

1001BM HHT-B Carrying Case. FOB Destination

1001CA Hand Held Barcode Terminal C (HHT-C), Large Display, Integrated Imager, and Full Alpha-numeric Keypad Capability. FOB Destination

1001CB HHT-C warranty upgrade to add 2 years

(total 5 year warranty). FOB Destination

1001CC HHT-C Holster and Shoulder Strap. FOB

Destination

1001CD HHT-C Rechargeable Battery (1EA). FOB

Destination

1001CE HHT-C Multiple (2) Battery Charger. FOB

Destination

1001CF HHT-C Single Battery Charger / Docking

Station. FOB Destination

1001CG HHT-C One pack of (1) tethered replacement styli. FOB Destination

1001CH HHT-C Transparent screen protector. FOB

Destination

1001CJ HHT-C portable printer interface connection and cable. FOB Destination

1001CK HHT-C Detachable hand strap. FOB

Destination

1001CM HHT-C Carrying Case. FOB Destination

1001DA Hand Held Barcode Terminal D (HHT-D)

Small Display, Integrated Imager, Full Alphanumeric

Keypad Capability and NI certified. FOB Destination

16 73

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

1001DB HHT-D warranty upgrade to add 2 years

(total 5 year warranty). FOB Destination

1001DC HHT-D Holster and Shoulder Strap. FOB

Destination

1001DD HHT-D Rechargeable Battery (1 EA). FOB

Destination

1001DE HHT-D Multiple (2) Battery Charger. FOB

Destination

1001DF HHT-D Single Battery Charger / Docking

Station. FOB Destination

1001DG HHT-D One pack of (1) tethered replacement styli. FOB Destination

1001DH HHT-D Transparent screen protector. FOB

Destination

1001DJ HHT-D portable printer interface connection and cable. FOB Destination

1001DK HHT-D Detachable hand strap. FOB

Destination

1001DM HHT-D Carrying Case. FOB Destination

1001EA Hand Held Barcode Terminal E (HHT-E)

Small Display, Integrated Imager, Full Alphanumeric

Keypad Capability, NI certified, and Pistol Grip

Handle. FOB Destination

1001EB HHT-E warranty upgrade to add 2 years

(total 5 year warranty). FOB Destination

1001EC HHT-E Holster and Shoulder Strap. FOB

Destination

1001ED HHT-E Rechargeable Battery (1EA). FOB

Destination

1001EE HHT-E Multiple (2) Battery Charger. FOB

Destination

17 73

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

1001EF HHT-E Single Battery Charger / Docking

Station. FOB Destination

1001EG HHT-E One pack of (1) tethered replacement styli. FOB Destination

1001EH HHT-E Transparent screen protector. FOB

Destination

1001EJ HHT-E portable printer interface connection and cable. FOB Destination

1001EK HHT-E Detachable hand strap. FOB

Destination

1001EM HHT- E Carrying Case. FOB Destination

(End of narrative B001)

1003 BARCODE IMAGERS FOR PC INPUT ____________________________

1003AA Imager for PC Input - General Bar Code

(Tethered). FOB Destination

1003AB Imager for PC Input - General Bar Code

(Bluetooth). FOB Destination

1003AC Imager for PC Input - IUID Label Markings.

FOB Destination

1003AD Imager for PC Input - IUID Direct Part

Markings. FOB Destination

1003AE Imager for PC Input - Extended Read Range

(tethered). FOB Destination

(End of narrative B001)

1005 BARCODE PRINTERS ________________

18 73

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

1005AA Portable/Wearable Bar Code Label Printer.

FOB Destination

1005AB

RESERVED

1005AC Battery Charger for Portable/Wearable BC

Label Printer. FOB Destination

1005AD Carrying Case with Strap for

Portable/Wearable BC Label Printer. FOB Destination

1005AE 4" x 6 " Label-Portable/Wearable BC Label

Printer (6 rolls). FOB Destination

1005BA Stationary Bar Code Label Printer. FOB

Destination

1005BB Stationary Bar Code Label Printer, with

Installed Take-Up Reel. FOB Destination

1005BC Roll of 4" by 6" Synthetic Label Stock (8 inch diameter roll) for Stationary BC Label Printer

(6 rolls). FOB Destination

1005BD Roll of 4" by 3" Synthetic Label Stock (8 inch diameter roll) for Stationary BC Label Printer

(6 rolls). FOB Destination

1005BE Resin Ribbon for 4" Width Labels for

Stationary BC Label Printer. FOB Destination

(End of narrative B001)

1007 IUID MARKING EQUIPMENT AND VERIFIERS ____________________________________

1007AA Laser Marking Equipment. FOB Destination

1007AB Adhesive film stock (25 sheets). FOB

Destination

1007AC Desktop Verifier for Labels. FOB

Destination

19 73

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

(End of narrative B001)

1009 WIRELESS RADIO FREQUENCY DATA COMMUNICATIONS ____________________________________________

1009AA Radio Frequency Access Point (Indoor

Environment). FOB Destination

1009AB Radio Frequency Access Point (NEMA). FOB

Destination

1009AC Radio Frequency Access Point (Office

Environment). FOB Destination

1009AD Radio Frequency Gateway. FOB Destination

(End of narrative B001)

1011 TRANSIT CASES AND TRANSIT CASE CONFIGURATION ____________________________________________

1011AA Transit Case Configuration, Small Arms

Room Kit. FOB Destination

(End of narrative B001)

1013 SOFTWARE ________

1013AA Bar Code Label Design and Printing

Software. FOB Destination

1013AB Small Arms Room Management Software. FOB

Destination

(End of narrative B001)

20 73

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

1015 EXPEDITED DELIVERY FOR HARDWARE AND SOFTWARE ____________________________________________

1015AA Expedited delivery CONUS.

1015AB Expedited delivery OCONUS.

FOB Destination

(End of narrative B001)

1017 TECHNICAL ENGINEERING SERVICES ______________________________

This CLIN series provides AIT-6 Technical

Engineering Services (TES) on a Firm Fixed Price basis in accordance with the AIT-6 "Performance ___________

Work Statement (PWS)" (Sect. J, Attachment 0001).____________________

SECURITY CLASS: Determined at Task Order Level

CLAUSES: Additional clauses required to perform

OCONUS shall be added at the Task Order level.

Specific requirements and pricing shall be set forth under individual Task Orders.

Pricing will be based on the established price model.

Inspection, Acceptance, and FOB Point shall be specified by incorporating the appropriate clauses from Sections E and F on each individual Task Order.

Delivery and Period of Performance Schedule(s) shall be determined on each individual Task Order.

Individual TES CLINs/SLINs to be assigned at Task

Order Level.

TES projects may include a combination of the following listed Labor Categories:

1017AA Project Manager.

1017AB Instructional Design and Development

Specialist.

1017AC Senior Programmer.

1017AD Systems Analyst.

21 73

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

1017AE Software Systems Engineer.

1017AF Programmer/Analyst.

1017AG Junior Programmer.

1017AH Systems Engineer.

1017AJ Data Comm/Network Specialist.

1017AK RF Technical Radio Specialist.

1017AM Technical Training Specialist.

1017AN Technical Writer.

(End of narrative B001)

1021 INCIDENTAL MATERIALS ____________________

1021AA Incidental Materials IAW Performance Work

Statement (PWS) (Sect. J, Attachment 0001).

(End of narrative B001)

1023 CONTRACTOR MANPOWER REPORTING _____________________________

1023AA Contractor Manpower Reporting - Not

Separately Priced (NSP).

(End of narrative B001)

1027 TRAVEL ______

***Travel CLINs are not to be priced by Offeror. In _______

22 73

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

order to have consistency between Offerors, the

Government has already pre-filled a fixed dollar amount with the Price Model (Sect. J, Attachment ___________

0003).

1027AA Travel IAW Performance Work Statement

(PWS) (Sect. J, Attachment 0001).

1027AB Per Diem IAW Performance Work Statement

(PWS) (Sect. J, Attachment 0001).

(End of narrative B001)

2001 HAND HELD BARCODE READER ________________________

***Offerors shall submit Prices in the Price Model ____________

(Sect. J, Attachment 0003) of the Solicitation.

All Prices are FFP. Hardware and Software are FOB

Destination***

2001AA Hand Held Barcode Terminal A (HHT-A)

Large Display, Integrated Imager, and Full

Alphanumeric Keypad Capability. FOB Destination

2001AB HHT-A warranty upgrade to add 2 years

(total 5 year warranty). FOB Destination

2001AC HHT-A Holster and Shoulder Strap. FOB

Destination

2001AD HHT-A Rechargeable Battery (1EA). FOB

Destination

2001AE HHT-A Multiple (2) Battery Charger. FOB

Destination

2001AF HHT-A Single Battery Charger / Docking

Station. FOB Destination

2001AG HHT-A One pack of (1) tethered replacement styli. FOB Destination

2001AH HHT-A Transparent screen protector. FOB

Destination

23 73

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

2001AJ HHT-A portable printer interface connection and cable. FOB Destination

2001AK HHT-A Detachable hand strap. FOB

Destination

2001AM HHT-A Carrying Case. FOB Destination

2001BA Hand Held Barcode Terminal B (HHT-B)

Small Display, Integrated Imager, and Full Alpha-numeric Keypad Capability. FOB Destination

2001BB HHT-B warranty upgrade to add 2 years

(total 5 year warranty). FOB Destination

2001BC HHT-B Holster and Shoulder Strap. FOB

Destination

2001BD HHT-B Rechargeable Battery (1EA). FOB

Destination

2001BE HHT-B Multiple (2) Battery Charger. FOB

Destination

2001BF HHT-B Single Battery Charger / Docking

Station. FOB Destination

2001BG HHT-B One pack of (1) tethered replacement styli. FOB Destination

2001BH HHT-B Transparent screen protector. FOB

Destination

2001BJ HHT-B portable printer interface connection and cable. FOB Destination

2001BK HHT-B Detachable hand strap. FOB

Destination

2001BM HHT-B Carrying Case. FOB Destination

2001CA Hand Held Barcode Terminal C (HHT-C), Large Display, Integrated Imager, and Full Alpha-numeric Keypad Capability. FOB Destination

2001CB HHT-C warranty upgrade to add 2 years

(total 5 year warranty). FOB Destination

24 73

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

2001CC HHT-C Holster and Shoulder Strap. FOB

Destination

2001CD HHT-C Rechargeable Battery (1EA). FOB

Destination

2001CE HHT-C Multiple (2) Battery Charger. FOB

Destination

2001CF HHT-C Single Battery Charger / Docking

Station. FOB Destination

2001CG HHT-C One pack of (1) tethered replacement styli. FOB Destination

2001CH HHT-C Transparent screen protector. FOB

Destination

2001CJ HHT-C portable printer interface connection and cable. FOB Destination

2001CK HHT-C Detachable hand strap. FOB

Destination

2001CM HHT-C Carrying Case. FOB Destination

2001DA Hand Held Barcode Terminal D (HHT-D)

Small Display, Integrated Imager, Full Alphanumeric

Keypad Capability and NI certified. FOB Destination

2001DB HHT-D warranty upgrade to add 2 years

(total 5 year warranty). FOB Destination

2001DC HHT-D Holster and Shoulder Strap. FOB

Destination

2001DD HHT-D Rechargeable Battery (1 EA). FOB

Destination

2001DE HHT-D Multiple (2) Battery Charger. FOB

Destination

2001DF HHT-D Single Battery Charger / Docking

Station. FOB Destination

2001DG HHT-D One pack of (1) tethered

25 73

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

replacement styli. FOB Destination

2001DH HHT-D Transparent screen protector. FOB

Destination

2001DJ HHT-D portable printer interface connection and cable. FOB Destination

2001DK HHT-D Detachable hand strap. FOB

Destination

2001DM HHT-D Carrying Case. FOB Destination

2001EA Hand Held Barcode Terminal E (HHT-E)

Small Display, Integrated Imager, Full Alphanumeric

Keypad Capability, NI certified, and Pistol Grip

Handle. FOB Destination

2001EB HHT-E warranty upgrade to add 2 years

(total 5 year warranty). FOB Destination

2001EC HHT-E Holster and Shoulder Strap. FOB

Destination

2001ED HHT-E Rechargeable Battery (1EA). FOB

Destination

2001EE HHT-E Multiple (2) Battery Charger. FOB

Destination

2001EF HHT-E Single Battery Charger / Docking

Station. FOB Destination

2001EG HHT-E One pack of (1) tethered replacement styli. FOB Destination

2001EH HHT-E Transparent screen protector. FOB

Destination

2001EJ HHT-E portable printer interface connection and cable. FOB Destination

2001EK HHT-E Detachable hand strap. FOB

Destination

2001EM HHT- E Carrying Case. FOB Destination

26 73

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

(End of narrative B001)

2003 BARCODE IMAGERS FOR PC INPUT ____________________________

2003AA Imager for PC Input - General Bar Code

(Tethered). FOB Destination

2003AB Imager for PC Input - General Bar Code

(Bluetooth). FOB Destination

2003AC Imager for PC Input - IUID Label Markings.

FOB Destination

2003AD Imager for PC Input - IUID Direct Part

Markings. FOB Destination

2003AE Imager for PC Input - Extended Read Range

(Tethered). FOB Destination

(End of narrative B001)

2005 BARCODE IMAGERS FOR PC INPUT ____________________________

2005AA Portable/Wearable Bar Code Label Printer.

FOB Destination

2005AB RESERVED

2005AC Battery Charger for Portable/Wearable BC

Label Printer. FOB Destination

2005AD Carrying Case with Strap for

Portable/Wearable BC Label Printer. FOB Destination

2005AE 4" x 6 " Label-Portable/Wearable BC Label

Printer (6 rolls). FOB Destination

2005BA Stationary Bar Code Label Printer. FOB

Destination

27 73

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

2005BB Stationary Bar Code Label Printer, with

Installed Take-Up Reel. FOB Destination

2005BC Roll of 4" by 6" Synthetic Label Stock (8 inch diameter roll) for Stationary BC Label Printer

(6 rolls). FOB Destination

2005BD Roll of 4" by 3" Synthetic Label Stock (8 inch diameter roll) for Stationary BC Label Printer

(6 rolls). FOB Destination

2005BE Resin Ribbon for 4" Width Labels for

Stationary BC Label Printer. FOB Destination

(End of narrative B001)

2007 IUID MARKING EQUIPMENT AND VERIFIERS ____________________________________

2007AA Laser Marking Equipment. FOB Destination

2007AB Adhesive film stock (25 sheets). FOB

Destination

2007AC Desktop Verifier for Labels. FOB

Destination

(End of narrative B001)

2009 WIRELESS RADIO FREQUENCY DATA COMMUNICATIONS ____________________________________________

2009AA Radio Frequency Access Point (Indoor

Environment). FOB Destination

2009AB Radio Frequency Access Point (NEMA). FOB

Destination

2009AC Radio Frequency Access Point (Office

Environment). FOB Destination

2009AD Radio Frequency Gateway. FOB Destination

28 73

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

(End of narrative B001)

2011 TRANSIT CASES AND TRANSIT CASE CONFIGURATION ____________________________________________

2011AA Transit Case Configuration, Small Arms

Room Kit. FOB Destination

(End of narrative B001)

2013 SOFTWARE ________

2013AA Bar Code Label Design and Printing

Software. FOB Destination

2013AB Small Arms Room Management Software. FOB

Destination

(End of narrative B001)

2015 EXPEDITED DELIVERY FOR HARDWARE AND SOFTWARE ____________________________________________

2015AA Expedited delivery CONUS.

2015AB Expedited delivery OCONUS.

FOB Destination

(End of narrative B001)

2017 TECHNICAL ENGINEERING SERVICES ______________________________

This CLIN series provides AIT-6 Technical

Engineering Services (TES) on a Firm Fixed Price

29 73

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

basis in accordance with the AIT-6 Performance ___________

Work Statement (PWS) (Sect. J, Attachment 0001).____________________

SECURITY CLASS: Determined at Task Order Level

CLAUSES: Additional clauses required to perform

OCONUS shall be added at the Task Order level.

Specific requirements and pricing shall be set forth under individual Task Orders.

Pricing will be based on the established price model.

Inspection, Acceptance, and FOB Point shall be specified by incorporating the appropriate clauses from Sections E and F on each individual Task Order.

Delivery and Period of Performance Schedule(s) shall be determined on each individual Task Order.

Individual TES CLINs/SLINs to be assigned at Task

Order Level.

TES projects may include a combination of the following listed Labor Categories:

2017AA Project Manager.

2017AB Instructional Design and Development

Specialist.

2017AC Senior Programmer.

2017AD Systems Analyst.

2017AE Software Systems Engineer.

2017AF Programmer/Analyst.

2017AG Junior Programmer.

2017AH Systems Engineer.

2017AJ Data Comm/Network Specialist.

2017AK RF Technical Radio Specialist.

2017AM Technical Training Specialist.

2017AN Technical Writer.

30 73

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

(End of narrative B001)

2021 INCIDENTAL MATERIALS ____________________

2021AA Incidental Materials IAW the Performance

Work Statement (PWS) (Sect. J, Attachment 0001).

(End of narrative B001)

2023 CONTRACTOR MANPOWER REPORTING _____________________________

2023AA Contractor Manpower Reporting - Not

Separately Priced (NSP).

(End of narrative B001)

2027 TRAVEL ______

***Travel CLINs are not to be priced by Offeror. In _______ order to have consistency between Offerors, the

Government has already pre-filled a fixed dollar amount with the Price Model (Sect. J, Attachment ___________

0003).

2027AA Travel IAW the Performance Work Statement

(PWS) (Sect. J, Attachment 0001).

2027AB Per Diem IAW the Performance Work

Statement (PWS) (Sect. J, Attachment 0001).

(End of narrative B001)

31 73

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

SECTION C - DESCRIPTION/SPECIFICATIONS/WORK STATEMENT

PERFORMANCE WORK STATEMENT

The Automatic Identification Technology-6 (AIT-6) "Performance Work Statement (PWS)" can be found in Section J, Attachment 0001. ________________________________

PRODUCT DEMONSTRATION REQUIREMENTS

The Automatic Identification Technology-6 (AIT-6) "Product Demonstration Requirements" can be found in Section J, Attachment 0002. __________________________________

*** END OF NARRATIVE C0001 ***

32 73

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

SECTION E - INSPECTION AND ACCEPTANCE

This document incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at these addresses:

http://farsite.hill.af.mil/ or https://www.acquisition.gov/

If the clause requires additional or unique information, then that information is provided immediately after the clause title.

Addendum to FAR 52.212-4, Contract Terms and Conditions Commercial Items_________________________________________________________________________

The terms and conditions for the following clauses are hereby incorporated into this solicitation and resulting contract as an addendum to FAR clause 52.212-4.

CLAUSE TITLE______ _____

52.246-15 CERTIFICATE OF CONFORMANCE (APR/1984)

52.246-16 RESPONSIBILITY FOR SUPPLIES (APR/1984)

INSPECTION/ACCEPTANCE_____________________

The Contractor shall only tender for acceptance those items that conform to the requirements of this contract. The Government reserves the right to inspect or test any supplies or services that have been tendered for acceptance. The Government may require repair or replacement of nonconforming supplies or re-performance of nonconforming services at no increase in contract price. If repair/replacement or re-performance will not correct the defects or is not possible, the Government may seek an equitable price reduction or adequate consideration for acceptance of nonconforming supplies or services.

For delivery orders against this contract that contain only supplies, representatives of the Defense Contract Management Agency (DCMA) shall perform inspection and acceptance of the supplies at origin. The DCMA Contract Administration Services (CAS) directory can be found at http://www.dcma.mil . The CAS directory also identifies the DFAS payment office that is associated with the DCMA.

For all other orders against this contract, the using activity representative as stated on each Delivery Order, Task Order, or____________________

Governmentwide commercial purchase card Task/Delivery Order shall perform inspection and acceptance of all the items contained on the order.

*** END OF NARRATIVE E0001 ***

33 73

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

SECTION F - DELIVERIES OR PERFORMANCE

This document incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at these addresses:

http://farsite.hill.af.mil/ or https://www.acquisition.gov/

If the clause requires additional or unique information, then that information is provided immediately after the clause title.

Regulatory Cite Title Date Regulatory Cite Title Date _______________ ______________________________________________________________________ ____________ _______________ ______________________________________________________________________ ____________

F-1 52.211-17 DELIVERY OF EXCESS QUANTITIES SEP/1989

F-2 252.211-7003 ITEM UNIQUE IDENTIFICATION AND VALUATION MAR/2016

(a) Definitions. As used in this clause--

"Automatic identification device" means a device, such as a reader or interrogator, used to retrieve data encoded on machine-readable media.

"Concatenated unique item identifier" means

(1) For items that are serialized within the enterprise identifier, the linking together of the unique identifier data elements in order of the issuing agency code, enterprise identifier, and unique serial number within the enterprise identifier; or

(2) For items that are serialized within the original part, lot, or batch number, the linking together of the unique identifier data elements in order of the issuing agency code; enterprise identifier; original part, lot, or batch number; and serial number within the original part, lot, or batch number.

"Data matrix" means a two-dimensional matrix symbology, which is made up of square or, in some cases, round modules arranged within a perimeter finder pattern and uses the Error Checking and Correction 200 (ECC200) specification found within International Standards

Organization (ISO)/International Electrotechnical Commission (IEC) 16022.

"Data qualifier" means a specified character (or string of characters) that immediately precedes a data field that defines the general category or intended use of the data that follows.

"DoD recognized unique identification equivalent" means a unique identification method that is in commercial use and has been recognized by DoD. All DoD recognized unique identification equivalents are listed at http://www.acq.osd.mil/dpap/pdi/uid/iuid_equivalents.html .

"DoD item unique identification" means a system of marking items delivered to DoD with unique item identifiers that have machine-readable data elements to distinguish an item from all other like and unlike items. For items that are serialized within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier and a unique serial number. For items that are serialized within the part, lot, or batch number within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier; the original part, lot, or batch number; and the serial number.

"Enterprise" means the entity (e.g., a manufacturer or vendor) responsible for assigning unique item identifiers to items.

"Enterprise identifier" means a code that is uniquely assigned to an enterprise by an issuing agency.

"Governments unit acquisition cost" means

(1) For fixed-price type line, subline, or exhibit line items, the unit price identified in the contract at the time of delivery;

(2) For cost-type or undefinitized line, subline, or exhibit line items, the Contractors estimated fully burdened unit cost to the

Government at the time of delivery; and

(3) For items produced under a time-and-materials contract, the Contractors estimated fully burdened unit cost to the Government at the time of delivery.

"Issuing agency" means an organization responsible for assigning a globally unique identifier to an enterprise, as indicated in the

Register of Issuing Agency Codes for ISO/IEC 15459, located at http://www.aimglobal.org/?Reg_Authority15459 .

34 73

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

"Issuing agency code" means a code that designates the registration (or controlling) authority for the enterprise identifier.

"Item" means a single hardware article or a single unit formed by a grouping of subassemblies, components, or constituent parts.

"Lot or batch number" means an identifying number assigned by the enterprise to a designated group of items, usually referred to as either a lot or a batch, all of which were manufactured under identical conditions.

"Machine-readable" means an automatic identification technology media, such as bar codes, contact memory buttons, radio frequency identification, or optical memory cards.

"Original part number" means a combination of numbers or letters assigned by the enterprise at item creation to a class of items with the same form, fit, function, and interface.

"Parent item" means the item assembly, intermediate component, or subassembly that has an embedded item with a unique item identifier or DoD recognized unique identification equivalent.

"Serial number within the enterprise identifier" means a combination of numbers, letters, or symbols assigned by the enterprise to an item that provides for the differentiation of that item from any other like and unlike item and is never used again within the enterprise.

"Serial number within the part, lot, or batch number" means a combination of numbers or letters assigned by the enterprise to an item that provides for the differentiation of that item from any other like item within a part, lot, or batch number assignment.

"Serialization within the enterprise identifier" means each item produced is assigned a serial number that is unique among all the tangible items produced by the enterprise and is never used again. The enterprise is responsible for ensuring unique serialization within the enterprise identifier.

"Serialization within the part, lot, or batch number" means each item of a particular part, lot, or batch number is assigned a unique serial number within that part, lot, or batch number assignment. The enterprise is responsible for ensuring unique serialization within the part, lot, or batch number within the enterprise identifier.

"Type designation" means a combination of letters and numerals assigned by the Government to a major end item, assembly or subassembly, as appropriate, to provide a convenient means of differentiating between items having the same basic name and to indicate modifications and changes thereto.

"Unique item identifier" means a set of data elements marked on items that is globally unique and unambiguous. The term includes a concatenated unique item identifier or a DoD recognized unique identification equivalent.

"Unique item identifier type" means a designator to indicate which method of uniquely identifying a part has been used. The current list of accepted unique item identifier types is maintained at http://www.acq.osd.mil/dpap/pdi/uid/uii_types.html .

(b) The Contractor shall deliver all items under a contract line, subline, or exhibit line item.

(c) Unique item identifier.

(1) The Contractor shall provide a unique item identifier for the following:

(i) Delivered items for which the Government's unit acquisition cost is $5,000 or more, except for the following line items:

Contract Line, Subline, or

Exhibit Line Item Number Item Description

CLIN 0007 and associated SLINs IUID Marking Equipment and Verifiers

(ii) Items for which the Government's unit acquisition cost is less than $5,000 that are identified in the Schedule or the following table:

Contract Line,…