Exhibit_B_CDRLS_Systems_Engineering_Data_2016_03_21.pdf
PDF 2 MB Posted
- Attached to
- ACWS
- Solicitation number
- W52P1J-16-R-0058
About this file
CDRL B
View the file
Other files
Show all 32
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
ACWS Exhibit B Systems Eng Version 1.0 17 December 2015
Exhibit B
Contract Data Requirements List Systems Engineering Data
B001 – B026 Army Contract Writing System
Solicitation Number: W52P1J-16-R-0058
Army Contracting Command – Rock Island
(ACC-RI)
Information Technology Division Attn: Mr. Jonathan J. Anderson, Contracting Officer Rock Island Arsenal
3055 Rodman Avenue Rock Island, IL 61299-8000
22 March 2016 i
All Exhibit CDRL item files are embedded in this document as attachments and may be accessed by clicking on the paperclip icon in the pane on the left side of this document.
ii
DD FORM 1423-1, FEB 2001
CONTRACT DATA REQUIREMENTS LIST
(1 Data Item)
PREVIOUS EDITION MAY BE USED.
Form Approved OMB No. 0704-0188
The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. Please do not return your form to the above organization. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.
A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY:
TDP ________ TM _______ OTHER
D. SYSTEM/ITEM E. CONTRACT/PR NO. F. CONTRACTOR
1. DATA ITEM NO. 2. TITLE OF DATA ITEM 3. SUBTITLE
4. AUTHORITY (Data Acquisition Document No.) 5. CONTRACT REFERENCE 6. REQUIRING OFFICE
7. DD 250 REQ
8. APP CODE
9. DIST STATEMENT
REQUIRED
10. FREQUENCY
11. AS OF DATE
12. DATE OF FIRST SUBMISSION
13. DATE OF SUBSEQUENT
SUBMISSION
14. DISTRIBUTION
a. ADDRESSEE
b. COPIES
Draft Final
Reg Repro
15. TOTAL
16. REMARKS
17. PRICE GROUP
18. ESTIMATED
TOTAL PRICE
G. PREPARED BY H. DATE I. APPROVED BY J. DATE
Page of Pages
16. REMARKS (Continued)
DD FORM 1423-1, FEB 2001 Page of Pages
INSTRUCTIONS FOR COMPLETING DD FORM 1423
(See DoD 5010.12-M for detailed instructions.)
FOR GOVERNMENT PERSONNEL
Item A. Self-explanatory.
Item B. Self-explanatory.
Item C. Mark (X) appropriate category: TDP - Technical Data Package;
TM - Technical Manual; Other - other category of data, such as "Provisioning,""Configuration Management," etc.
Item D. Enter name of system/item being acquired that data will support.
Item E. Self-explanatory (to be filled in after contract award).
Item F. Self-explanatory (to be filled in after contract award).
Item G. Signature of preparer of CDRL.
Item H. Date CDRL was prepared.
Item I. Signature of CDRL approval authority.
Item J. Date CDRL was approved.
Item 1. See DoD FAR Supplement Subpart 4.71 for proper numbering.
Item 2. Enter title as it appears on data acquisition document cited in Item 4.
Item 3. Enter subtitle of data item for further definition of data item (optional entry).
Item 4. Enter Data Item Description (DID) number, military specification number, or military standard number listed in DoD 5010.12-L (AMSDL), or one-time DID number, that defines data content and format requirements.
Item 5. Enter reference to tasking in contract that generates requirement for the data item (e.g., Statement of Work paragraph number).
Item 6. Enter technical office responsible for ensuring adequacy of the data item.
Item 7. Specify requirement for inspection/acceptance of the data item by the Government.
Item 8. Specify requirement for approval of a draft before preparation of the final data item.
Item 9. For technical data, specify requirement for contractor to mark the appropriate distribution statement on the data (ref. DoDD 5230.24).
Item 10. Specify number of times data items are to be delivered.
Item 11. Specify as-of date of data item, when applicable.
Item 12. Specify when first submittal is required.
Item 13. Specify when subsequent submittals are required, when applicable.
Item 14. Enter addressees and number of draft/final copies to be delivered to each addressee. Explain reproducible copies in Item 16.
Item 15. Enter total number of draft/final copies to be delivered.
Item 16. Use for additional/clarifying information for Items 1 through 15.
Examples are: Tailoring of documents cited in Item 4; Clarification of submittal dates in Items 12 and 13; Explanation of reproducible copies in Item 14.; Desired medium for delivery of the data item.
FOR THE CONTRACTOR
Item 17. Specify appropriate price group from one of the following groups of effort in developing estimated prices for each data item listed on the DD Form 1423.
a. Group I. Definition - Data which is not otherwise essential to the contractor's performance of the primary contracted effort (production, development, testing, and administration) but which is required by DD Form 1423.
Estimated Price - Costs to be included under Group I are those applicable to preparing and assembling the data item in conformance with Government requirements, and the administration and other expenses related to reproducing and delivering such data items to the Government.
b. Group II. Definition - Data which is essential to the performance of the primary contracted effort but the contractor is required to perform additional work to conform to Government requirements with regard to depth of content, format, frequency of submittal, preparation, control, or quality of the data item.
Estimated Price - Costs to be included under Group II are those incurred over and above the cost of the essential data item without conforming to Government requirements, and the administrative and other expenses related to reproducing and delivering such data item to the Government.
c. Group III. Definition - Data which the contractor must develop for his internal use in performance of the primary contracted effort and does not require any substantial change to conform to Government requirements with regard to depth of content, format, frequency of submittal, preparation, control, and quality of the data item.
Estimated Price - Costs to be included under Group III are the administrative and other expenses related to reproducing and
d. Group IV. Definition - Data which is developed by the contractor as part of his normal operating procedures and his effort in supplying these data to the Government is minimal.
Estimated Price - Group IV items should normally be shown on the DD Form 1423 at no cost.
Item 18. For each data item, enter an amount equal to that portion of the total price which is estimated to be attributable to the production or development for the Government of that item of data.
These estimated data prices shall be developed only from those costs which will be incurred as a direct result of the requirement to supply the data, over and above those costs which would otherwise be incurred in performance of the contract if no data were required. The estimated data prices shall not include any amount for rights in data. The Government's right to use the data shall be governed by the pertinent provisions of the contract.
DD FORM 1423-1 (BACK), FEB 2001
1_DATA_ITEM_NO: B014
2_TITLE_OF_DATA_ITEM: BUILD PLAN
3_SUBTITLE: N/A
4_AUTHORITY_Data_Acquisit: SEE BLK 16
5_CONTRACT_REFERENCE: SOO 6.3.1 / PWS TBD
6_REQUIRING_OFFICE: PdM ACWS
7_DID_250_REQ: LT
8_APP_CODE: BLANK
DIST_STATEMENT: SEE BLK 16
10_FREQUENCY: ASREQ
11_AS_OF_DATE: N/A
12_DATE_OF_FIRST_SUBMISSI: SEE BLK 16
13_DATE_OF_SUBSEQUENT_SUB: SEE BLK 16
addressee1: ACWS SE WIPT draft1:
reg1: 0 repro1: 1 addressee2: PdM ACWS COR draft2:
reg2: 1 repro2: 0 addressee3:
draft3:
reg3:
repro3:
addressee4:
draft4:
reg4:
repro4:
addressee5:
draft5:
reg5:
repro5:
addressee6:
draft6:
reg6:
repro6:
addressee7:
draft7:
reg7:
repro7:
addressee8:
draft8:
reg8:
repro8:
addressee9:
draft9:
reg9:
repro9:
addressee10:
draft10:
reg10:
repro10:
addressee11:
draft11:
reg11:
repro11:
addressee12:
draft12:
reg12:
repro12:
addressee13:
draft13:
reg13:
repro13:
addressee14:
draft14:
reg14:
repro14:
addressee15:
draft15:
reg15:
repro15:
addressee16:
draft16:
reg16:
repro16:
addressee17:
draft17:
reg17:
repro17:
addressee18:
draft18:
reg18:
repro18:
addressee19:
draft19:
reg19:
repro19:
addressee20:
draft20:
reg20:
repro20:
addressee21:
draft21:
reg21:
repro21:
addressee22:
draft22:
reg22:
repro22:
addressee23:
draft23:
reg23:
repro23:
addressee24:
draft24:
reg24:
repro24:
addressee25:
draft25:
reg25:
repro25:
addressee26:
draft26:
reg26:
repro26:
addressee27:
draft27:
reg27:
repro27:
addressee28:
draft28:
reg28:
repro28:
addressee29:
draft29:
reg29:
repro29:
addressee30:
draft30:
reg30:
repro30:
addressee31:
draft31:
reg31:
repro31:
addressee32:
draft32:
reg32:
repro32:
addressee33:
draft33:
reg33:
repro33:
addressee34:
draft34:
reg34:
repro34:
addressee35:
draft35:
reg35:
repro35:
addressee36:
draft36:
reg36:
repro36:
addressee37:
draft37:
reg37:
repro37:
addressee38:
draft38:
reg38x:
repro38:
total_draft: 0 total_repro: 1
16_REMARKS: BLOCK 4: Contractor developed, Government approved format is acceptable. The Build Plan shall provide an actionable plan for ACWS solution design, development, test, and deployment with proposed Builds that includes a schedule that meets all system requirements within cost, schedule, and performance constraints; a development object inventory (e.g., Reports, Interfaces, Conversions, Extensions, Forms, and Workflow (RICEFW), Configuration, Roles) mapped to solution scope and to each proposed Build; The Build Plan shall also provide a detailed schedule that aligns to all technical reviews, acquisition milestones, and test events, as well as show the relevant Army Procurement Commands and Sub-Commands and expected delivery to those respective users by Build.
BLOCK 9: DISTRIBUTION C. Distribution authorized to U.S. Government Agencies and their contractors, Reason: Administrative and Operational Use, 29 Oct 2014. All other requests shall be referred to PdM ACWS, 200 Stovall St, Hoffman Bldg II Alexandria VA 22332
BLOCK 12: First submission due 30 calendar days prior to SFR. Subsequent submission due 30 calendar days prior to PDR.
BLOCK 13: Updates shall be due no later than 30 calendar days after subsequent Build Task Order award.
BLOCK 14: Electronically delivered - reproducible in Microsoft Office formats unless otherwise approved by PdM ACWS. The Government shall have up to 15 calendar days to review for each submission.
17_PRICE_GROUP:
ESTIMATED_TOTAL_PRICE:
G_PREPARED_BY: Dr. Li-Chuan Chen, SE WIPT Lead
H_DATE: 12/16/2015
1_APPROVED_BY: Kim Reid, Deputy PdM ACWS
J_DATE: 12/16/2015
Page: 1 reg38t: 1
A_CONTRACT_LINE_ITEM_NO: 003
B_EXHIBIT: B
TDP:
TM:
OTHER: X
DSYSTEMITEM: Army Contract Writing System (ACWS)
E_CONTRACTPR_NO: TBD
FCONTRACTOR: TBD
16_REMARKS_Continued:
Page2: 2 of_pages: 3
Reset:
The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. Please do not return your form to the above organization. Send completed form to the conformance with Government requirements, and the required to perform additional work to conform to Government without conforming to Government requirements, and the contracted effort and does not require any substantial change to conform to Government requirements with regard to depth of otherwise be incurred in performance of the contract if no data were required. The estimated data prices shall not include any
1_DATA_ITEM_NO: B015
2_TITLE_OF_DATA_ITEM: Software Design Description (SDD)
3_SUBTITLE: N/A
4_AUTHORITY_Data_Acquisit: DI-IPSC-81435A (SEE BLK 16)
5_CONTRACT_REFERENCE: SOO 6.3.1 / PWS TBD
6_REQUIRING_OFFICE: PdM ACWS
7_DID_250_REQ: DD
8_APP_CODE: A
DIST_STATEMENT: SEE BLK 16
10_FREQUENCY: ASREQ
11_AS_OF_DATE: N/A
12_DATE_OF_FIRST_SUBMISSI: SEE BLK 16
13_DATE_OF_SUBSEQUENT_SUB: SEE BLK 16
addressee1: ACWS SE WIPT draft1:
reg1: 0 repro1: 1 addressee2: PdM ACWS COR draft2:
reg2: 1 repro2: 0 addressee3:
draft3:
reg3:
repro3:
addressee4:
draft4:
reg4:
repro4:
addressee5:
draft5:
reg5:
repro5:
addressee6:
draft6:
reg6:
repro6:
addressee7:
draft7:
reg7:
repro7:
addressee8:
draft8:
reg8:
repro8:
addressee9:
draft9:
reg9:
repro9:
addressee10:
draft10:
reg10:
repro10:
addressee11:
draft11:
reg11:
repro11:
addressee12:
draft12:
reg12:
repro12:
addressee13:
draft13:
reg13:
repro13:
addressee14:
draft14:
reg14:
repro14:
addressee15:
draft15:
reg15:
repro15:
addressee16:
draft16:
reg16:
repro16:
addressee17:
draft17:
reg17:
repro17:
addressee18:
draft18:
reg18:
repro18:
addressee19:
draft19:
reg19:
repro19:
addressee20:
draft20:
reg20:
repro20:
addressee21:
draft21:
reg21:
repro21:
addressee22:
draft22:
reg22:
repro22:
addressee23:
draft23:
reg23:
repro23:
addressee24:
draft24:
reg24:
repro24:
addressee25:
draft25:
reg25:
repro25:
addressee26:
draft26:
reg26:
repro26:
addressee27:
draft27:
reg27:
repro27:
addressee28:
draft28:
reg28:
repro28:
addressee29:
draft29:
reg29:
repro29:
addressee30:
draft30:
reg30:
repro30:
addressee31:
draft31:
reg31:
repro31:
addressee32:
draft32:
reg32:
repro32:
addressee33:
draft33:
reg33:
repro33:
addressee34:
draft34:
reg34:
repro34:
addressee35:
draft35:
reg35:
repro35:
addressee36:
draft36:
reg36:
repro36:
addressee37:
draft37:
reg37:
repro37:
addressee38:
draft38:
reg38x:
repro38:
total_draft: 0 total_repro: 1
16_REMARKS: BLOCK C. FAR 52.227-21 -- Technical Data Declaration, Revision, and Withholding of Payment -- Major Systems. (May 2014) and DFAR part 252.227-7030 apply.
BLOCK 4: Contractor developed, Government approved, format is acceptable.
The applicable content of the Software Programmer's Guide , DI-IPSC-81633, shall be included as an Appendix in the SDD.
Applies to custom software development for ACWS-specific Computer Software Configuration Item (s) (CSCIs) which are required, but not available out of the box.
BLOCK 9: DISTRIBUTION C. Distribution authorized to U.S. Government Agencies and their contractors, Reason: Administrative and Operational Use, 29 Oct 2014. All other requests shall be referred to PdM ACWS, 200 Stovall St, Hoffman Bldg II Alexandria VA 22332
BLOCK 12: SDD through section 4 (architecture) delivered 30 calendar days prior to Preliminary Design Review (PDR) during the Risk Reduction phase
BLOCK 13: Subsequent submissions for each Build Task Order delivered 30 calendar days prior to each Critical Design Review (CDR)
BLOCK 14: Electronically delivered - reproducible in Microsoft Office formats unless otherwise approved by PdM ACWS. The Government shall have up to 15 calendar days to review for each submission.
17_PRICE_GROUP:
ESTIMATED_TOTAL_PRICE:
G_PREPARED_BY: Dr. Li-Chuan Chen, SE WIPT Lead
H_DATE: 12/16/2015
1_APPROVED_BY: Kim Reid, Deputy PdM ACWS
J_DATE: 12/16/2015
Page: 1 reg38t: 1
A_CONTRACT_LINE_ITEM_NO: 003
B_EXHIBIT: B
TDP: X
TM:
OTHER:
DSYSTEMITEM: Army Contract Writing System (ACWS)
E_CONTRACTPR_NO: TBD
FCONTRACTOR: TBD
16_REMARKS_Continued:
Page2: 2 of_pages: 3
Reset:
The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. Please do not return your form to the above organization. Send completed form to the conformance with Government requirements, and the required to perform additional work to conform to Government without conforming to Government requirements, and the contracted effort and does not require any substantial change to conform to Government requirements with regard to depth of otherwise be incurred in performance of the contract if no data were required. The estimated data prices shall not include any
1_DATA_ITEM_NO: B016
2_TITLE_OF_DATA_ITEM: Interface Design Description (IDD)
3_SUBTITLE: N/A
4_AUTHORITY_Data_Acquisit: DI-IPSC-81436A
5_CONTRACT_REFERENCE: SOO 6.3.1 / PWS TBD
6_REQUIRING_OFFICE: PdM ACWS
7_DID_250_REQ: DD
8_APP_CODE: A
DIST_STATEMENT: SEE BLK 16
10_FREQUENCY: ASREQ
11_AS_OF_DATE: N/A
12_DATE_OF_FIRST_SUBMISSI: SEE BLK 16
13_DATE_OF_SUBSEQUENT_SUB: SEE BLK 16
addressee1: ACWS SE WIPT draft1:
reg1: 0 repro1: 1 addressee2: PdM ACWS COR draft2:
reg2: 1 repro2: 0 addressee3:
draft3:
reg3:
repro3:
addressee4:
draft4:
reg4:
repro4:
addressee5:
draft5:
reg5:
repro5:
addressee6:
draft6:
reg6:
repro6:
addressee7:
draft7:
reg7:
repro7:
addressee8:
draft8:
reg8:
repro8:
addressee9:
draft9:
reg9:
repro9:
addressee10:
draft10:
reg10:
repro10:
addressee11:
draft11:
reg11:
repro11:
addressee12:
draft12:
reg12:
repro12:
addressee13:
draft13:
reg13:
repro13:
addressee14:
draft14:
reg14:
repro14:
addressee15:
draft15:
reg15:
repro15:
addressee16:
draft16:
reg16:
repro16:
addressee17:
draft17:
reg17:
repro17:
addressee18:
draft18:
reg18:
repro18:
addressee19:
draft19:
reg19:
repro19:
addressee20:
draft20:
reg20:
repro20:
addressee21:
draft21:
reg21:
repro21:
addressee22:
draft22:
reg22:
repro22:
addressee23:
draft23:
reg23:
repro23:
addressee24:
draft24:
reg24:
repro24:
addressee25:
draft25:
reg25:
repro25:
addressee26:
draft26:
reg26:
repro26:
addressee27:
draft27:
reg27:
repro27:
addressee28:
draft28:
reg28:
repro28:
addressee29:
draft29:
reg29:
repro29:
addressee30:
draft30:
reg30:
repro30:
addressee31:
draft31:
reg31:
repro31:
addressee32:
draft32:
reg32:
repro32:
addressee33:
draft33:
reg33:
repro33:
addressee34:
draft34:
reg34:
repro34:
addressee35:
draft35:
reg35:
repro35:
addressee36:
draft36:
reg36:
repro36:
addressee37:
draft37:
reg37:
repro37:
addressee38:
draft38:
reg38x:
repro38:
total_draft: 0 total_repro: 1
16_REMARKS: BLOCK C. FAR 52.227-21 -- Technical Data Declaration, Revision, and Withholding of Payment -- Major Systems. (May 2014) and DFAR part 252.227-7030 apply.
BLOCK 4: Contractor developed, Government approved, format is acceptable.
BLOCK 9: DISTRIBUTION C. Distribution authorized to U.S. Government Agencies and their contractors, Reason: Administrative and Operational Use, 29 Oct 2014. All other requests shall be referred to PdM ACWS, 200 Stovall St, Hoffman Bldg II Alexandria VA 22332
BLOCK 12: Preliminary submission 30 calendar days prior to Preliminary Design Review (PDR) during the Risk Reduction phase
BLOCK 13: Subsequent submissions for each Build Task Order delivered 30 calendar days prior to each Critical Design Review (CDR)
BLOCK 14: Electronically delivered - reproducible in Microsoft Office formats unless otherwise approved by PdM ACWS. The Government shall have up to 15 calendar days to review for each submission.
17_PRICE_GROUP:
ESTIMATED_TOTAL_PRICE:
G_PREPARED_BY: Dr. Li-Chuan Chen, SE WIPT Lead
H_DATE: 12/16/2015
1_APPROVED_BY: Kim Reid, Deputy PdM ACWS
J_DATE: 12/16/2015
Page: 1 reg38t: 1
A_CONTRACT_LINE_ITEM_NO: 003
B_EXHIBIT: B
TDP: X
TM:
OTHER:
DSYSTEMITEM: Army Contract Writing System (ACWS)
E_CONTRACTPR_NO: TBD
FCONTRACTOR: TBD
16_REMARKS_Continued:
Page2: 2 of_pages: 3
Reset:
The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. Please do not return your form to the above organization. Send completed form to the conformance with Government requirements, and the required to perform additional work to conform to Government without conforming to Government requirements, and the contracted effort and does not require any substantial change to conform to Government requirements with regard to depth of otherwise be incurred in performance of the contract if no data were required. The estimated data prices shall not include any
1_DATA_ITEM_NO: B017
2_TITLE_OF_DATA_ITEM: Database Design Description (DBDD)
3_SUBTITLE: N/A
4_AUTHORITY_Data_Acquisit: DI-IPSC-81437A
5_CONTRACT_REFERENCE: SOO 6.3.1 / PWS TBD
6_REQUIRING_OFFICE: PdM ACWS
7_DID_250_REQ: DD
8_APP_CODE: A
DIST_STATEMENT: SEE BLK 16
10_FREQUENCY: ASREQ
11_AS_OF_DATE: N/A
12_DATE_OF_FIRST_SUBMISSI: SEE BLK 16
13_DATE_OF_SUBSEQUENT_SUB: SEE BLK 16
addressee1: ACWS SE WIPT draft1:
reg1: 0 repro1: 1 addressee2: PdM ACWS COR draft2:
reg2: 1 repro2: 0 addressee3:
draft3:
reg3:
repro3:
addressee4:
draft4:
reg4:
repro4:
addressee5:
draft5:
reg5:
repro5:
addressee6:
draft6:
reg6:
repro6:
addressee7:
draft7:
reg7:
repro7:
addressee8:
draft8:
reg8:
repro8:
addressee9:
draft9:
reg9:
repro9:
addressee10:
draft10:
reg10:
repro10:
addressee11:
draft11:
reg11:
repro11:
addressee12:
draft12:
reg12:
repro12:
addressee13:
draft13:
reg13:
repro13:
addressee14:
draft14:
reg14:
repro14:
addressee15:
draft15:
reg15:
repro15:
addressee16:
draft16:
reg16:
repro16:
addressee17:
draft17:
reg17:
repro17:
addressee18:
draft18:
reg18:
repro18:
addressee19:
draft19:
reg19:
repro19:
addressee20:
draft20:
reg20:
repro20:
addressee21:
draft21:
reg21:
repro21:
addressee22:
draft22:
reg22:
repro22:
addressee23:
draft23:
reg23:
repro23:
addressee24:
draft24:
reg24:
repro24:
addressee25:
draft25:
reg25:
repro25:
addressee26:
draft26:
reg26:
repro26:
addressee27:
draft27:
reg27:
repro27:
addressee28:
draft28:
reg28:
repro28:
addressee29:
draft29:
reg29:
repro29:
addressee30:
draft30:
reg30:
repro30:
addressee31:
draft31:
reg31:
repro31:
addressee32:
draft32:
reg32:
repro32:
addressee33:
draft33:
reg33:
repro33:
addressee34:
draft34:
reg34:
repro34:
addressee35:
draft35:
reg35:
repro35:
addressee36:
draft36:
reg36:
repro36:
addressee37:
draft37:
reg37:
repro37:
addressee38:
draft38:
reg38x:
repro38:
total_draft: 0 total_repro: 1
16_REMARKS: BLOCK C. FAR 52.227-21 -- Technical Data Declaration, Revision, and Withholding of Payment -- Major Systems. (May 2014) and DFAR part 252.227-7030 apply.
BLOCK 4: Contractor developed, Government approved, format is acceptable.
BLOCK 9: DISTRIBUTION C. Distribution authorized to U.S. Government Agencies and their contractors, Reason: Administrative and Operational Use, 29 Oct 2014. All other requests shall be referred to PdM ACWS, 200 Stovall St, Hoffman Bldg II Alexandria VA 22332
BLOCK 12: Preliminary submission 30 calendar days prior to Preliminary Design Review (PDR) during the Risk Reduction phase
BLOCK 13: Subsequent submissions for each Build Task Order delivered 30 calendar days prior to each Critical Design Review (CDR)
BLOCK 14: Electronically delivered - reproducible in Microsoft Office formats unless otherwise approved by PdM ACWS. The Government shall have up to 21 calendar days to review for each submission.
17_PRICE_GROUP:
ESTIMATED_TOTAL_PRICE:
G_PREPARED_BY: Dr. Li-Chuan Chen, SE WIPT Lead
H_DATE: 12/16/2015
1_APPROVED_BY: Kim Reid, Deputy PdM ACWS
J_DATE: 12/16/2015
Page: 1 reg38t: 1
A_CONTRACT_LINE_ITEM_NO: 003
B_EXHIBIT: N/A
TDP: X
TM:
OTHER:
DSYSTEMITEM: Army Contract Writing System (ACWS)
E_CONTRACTPR_NO: TBD
FCONTRACTOR: TBD
16_REMARKS_Continued:
Page2: 2 of_pages: 3
Reset:
The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. Please do not return your form to the above organization. Send completed form to the conformance with Government requirements, and the required to perform additional work to conform to Government without conforming to Government requirements, and the contracted effort and does not require any substantial change to conform to Government requirements with regard to depth of otherwise be incurred in performance of the contract if no data were required. The estimated data prices shall not include any data_item: B018 title: HUMAN ENGINEERING DESIGN APPROACH DOCUMENT - USER (HEDAD-U) sub: N/A auth: SEE BLK 16 ref: SOO 6.3.1 / PWS TBD req_ofc: PdM ACWS dd250: LT appcode: BLANK dist: SEE BLK 16 freq: ONE/R asof: N/A firstsub: 90 DAC subsub: N/A addressee1: ACWS SE WIPT draft1:
reg1: 0 repro1: 1 addressee2: PdM ACWS COR draft2:
reg2: 1 repro2: 0 addressee3:
draft3:
reg3:
repro3:
addressee4:
draft4:
reg4:
repro4:
addressee5:
draft5:
reg5:
repro5:
addressee6:
draft6:
reg6:
repro6:
addressee7:
draft7:
reg7:
repro7:
addressee8:
draft8:
reg8:
repro8:
addressee9:
draft9:
reg9:
repro9:
addressee10:
draft10:
reg10:
repro10:
addressee11:
draft11:
reg11:
repro11:
addressee12:
draft12:
reg12:
repro12:
addressee13:
draft13:
reg13:
repro13:
addressee14:
draft14:
reg14:
repro14:
addressee15:
draft15:
reg15:
repro15:
addressee16:
draft16:
reg16:
repro16:
addressee17:
draft17:
reg17:
repro17:
addressee18:
draft18:
reg18:
repro18:
addressee19:
draft19:
reg19:
repro19:
addressee20:
draft20:
reg20:
repro20:
addressee21:
draft21:
reg21:
repro21:
addressee22:
draft22:
reg22:
repro22:
addressee23:
draft23:
reg23:
repro23:
addressee24:
draft24:
reg24:
repro24:
addressee25:
draft25:
reg25:
repro25:
addressee26:
draft26:
reg26:
repro26:
addressee27:
draft27:
reg27:
repro27:
addressee28:
draft28:
reg28:
repro28:
addressee29:
draft29:
reg29:
repro29:
addressee30:
draft30:
reg30:
repro30:
addressee31:
draft31:
reg31:
repro31:
addressee32:
draft32:
reg32:
repro32:
addressee33:
draft33:
reg33:
repro33:
addressee34:
draft34:
reg34:
repro34:
addressee35:
draft35:
reg35:
repro35:
addressee36:
draft36:
reg36:
repro36:
addressee37:
draft37:
reg37:
repro37:
addressee38:
draft38:
reg38x:
repro38:
total_draft: 0 total_reg: 1 total_repro: 1 remarks:
BLOCK 4: See "Human Engineering Design Approach Document - User (HEDAD-U)" below on Page 2 of this CDRL for use/relationship and data item requirements.
BLOCK 9: DISTRIBUTION C. Distribution authorized to U.S. Government Agencies and their contractors, Reason: Administrative and Operational Use, 29 Oct 2014. All other requests shall be referred to PdM ACWS, 200 Stovall St, Hoffman Bldg II Alexandria VA 22332
BLOCK 14: Electronically delivered - reproducible in Microsoft Office formats unless otherwise approved by PdM ACWS. The Government shall have up to 21 calendar days to review for each submission.
group:
total_price:
prep_name: Dr. Li-Chuan Chen, SE WIPT Lead line_item: 003 exhibit: B xtdp: Off xtm: Off othercat: X system: Army Contract Writing System (AWCS) ctr_no: TBD contr: TBD remarksb: Title: Human Engineering Design Approach Document - User (HEDAD-U)
Use/relationship: The Human Engineering Design Approach Document - User (HEDAD-U) describes interfaces with operators. This document provides a source of data to evaluate the extent an interface with operators meets human performance requirements and human engineering criteria, and provides the human engineering rationale for the design.
a. This CDRL contains the format and content preparation instructions for the HEDAD-U resulting from applicable tasks delineated in the statement of objectives (SOO).
Requirements:
1. Reference documents. None.
2. General. The HEDAD-U shall describe the layout, detailed design, and human engineering design rationale of user interfaces, and provide information about operator tasks associated with the interfaces. The HEDAD-U shall describe the extent to which human performance requirements have been addressed and applicable human engineering design criteria (per specifications and standards cited in the SOO and system specification) have been incorporated into the layout and detailed design of user interfaces. As applicable, results from analysis of operator tasks shall be presented as part of the rationale supporting the layout, design, and arrangement of user interfaces.
3. Format. This document contains the format and content preparation instructions for the HEDAD-U resulting from applicable tasks delineated in the SOO. If the information required herein is provided in the contractor’s format, it shall include specific references to the sections described herein to facilitate the mapping to the HEDAD-U requirements. Unless it would degrade effective presentation, the initially used format shall be used for all subsequent submission. Revisions shall be clearly indicated in a manner consistent with standard editorial practices.
4. Content. The HEDAD-U shall address the following:
a. User interfaces. A list of the user interfaces (grouped as appropriate) and the purpose of each shall be provided and described for each operator.
b. Controls and displays. The layout and detail design for each user interface shall be described with regard to the intended use by the operator in the context of primary mission performance. The descriptions shall include, as applicable:
i. User interfaces.
(a) User interface design approach. An overview of the design approach, including a copy or reference to the user-interface style guide and source (e.g., Microsoft Windows ™, FalconView ®), if any, shall be provided. The overview shall include, as appropriate, a description of the type and source of symbology (e.g., MIL-STD-2525), data entry, data display and option selection widgets, color-coding conventions).
(b) Display hierarchy. For multifunction display devices, the hierarchy (page tree) used to access all display pages shall be provided.
(c) Display design and interaction. For each user-interface screen or group of functionally related screens, a description of the operator interaction shall be provided. If a separate user interface design description document is available, it can be provided or referenced to fulfill provisions of this paragraph.
ii. Automation. Automation features, including the rationale and intended effect on operator workload and performance, shall be described.
iii. User alerting. User alerting systems, including audio and visual warning, caution, and advisory alerts shall be described with regard to alerting philosophy; type, coding, and organization of alerts; and causes and responses to alerts.
c. Communications systems. Communication systems and communication systems control shall be described.
d. Human engineering design rationale. The rationale for human engineering design, layout, and arrangement of each operator interface shall be described as part of the design description. The rationale shall include, as applicable, specific considerations of system mission (or system function); operator selection, training, and skill requirements; operator task performance requirements; and any limitations imposed on design by the procuring agency. The basis for reaching specific design, layout, and arrangement decisions shall be presented (e.g., human engineering requirements or guidelines specified in the contract; system engineering analyses; systems analyses, task analysis, human engineering studies; trade-off analyses; mock-up and simulation results, and human engineering test results). The design rationale can be presented with the design description for each user interface or functionally grouped set of interfaces.
e. Task analysis. If conducted, results from the analysis of new or significantly modified operator tasks (see MIL-HDBK-1908) shall be presented as part of the rationale for operator station design, integration, and layout. Any task analysis description shall include the methodology used to generate task analysis results (e.g., paper and pencil, computer-based simulation, dynamic simulation) and system-mission(s), function(s), or other external information use to “drive” the task analysis. Critical tasks (see MIL-HDBK-1908) shall be clearly identified. If the task analysis or supporting data is available through other sources, such as a task inventory or training analysis, that data shall be referenced to fulfill the intent of this paragraph, and an executive summary of the methods and results shall be provided.
f. Alternative to baseline design. A drawing, photograph, or CAD/computer rendering of each user interface being considered as a substantial (not incremental) alternative to the baseline user interface at the time of submission shall be provided, with a brief rationale for the alternative.
g. Design changes. A list of the design, arrangement, or layout changes made since the last HEDAD-U preparation shall be provided, with references to the section(s) where the new design, arrangement, or layout is described.
Page2: 2
Reset:
prep_date: 12/16/2015 app_by: Kim Reid, Deputy PdM ACWS app_date: 12/16/2015
Page: 1 of_pages: 3 app: Adobe Professional 8.0
The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. Please do not return your form to the above organization. Send completed form to the conformance with Government requirements, and the required to perform additional work to conform to Government without conforming to Government requirements, and the contracted effort and does not require any substantial change to conform to Government requirements with regard to depth of otherwise be incurred in performance of the contract if no data were required. The estimated data prices shall not include any
1_DATA_ITEM_NO: B019
2_TITLE_OF_DATA_ITEM: Computer Software Baseline
3_SUBTITLE: N/A
4_AUTHORITY_Data_Acquisit: SEE BLK 16
5_CONTRACT_REFERENCE: SOO 6.3.2 / PWS TBD
6_REQUIRING_OFFICE: PdM ACWS
7_DID_250_REQ: DD
8_APP_CODE: A
DIST_STATEMENT: SEE BLK 16
10_FREQUENCY: ASREQ
11_AS_OF_DATE: N/A
12_DATE_OF_FIRST_SUBMISSI: 90 DAC
13_DATE_OF_SUBSEQUENT_SUB: SEE BLK 16
addressee1: ACWS SE WIPT draft1:
reg1: 0 repro1: 1 addressee2: PdM ACWS COR draft2:
reg2: 1 repro2: 0 addressee3:
draft3:
reg3:
repro3:
addressee4:
draft4:
reg4:
repro4:
addressee5:
draft5:
reg5:
repro5:
addressee6:
draft6:
reg6:
repro6:
addressee7:
draft7:
reg7:
repro7:
addressee8:
draft8:
reg8:
repro8:
addressee9:
draft9:
reg9:
repro9:
addressee10:
draft10:
reg10:
repro10:
addressee11:
draft11:
reg11:
repro11:
addressee12:
draft12:
reg12:
repro12:
addressee13:
draft13:
reg13:
repro13:
addressee14:
draft14:
reg14:
repro14:
addressee15:
draft15:
reg15:
repro15:
addressee16:
draft16:
reg16:
repro16:
addressee17:
draft17:
reg17:
repro17:
addressee18:
draft18:
reg18:
repro18:
addressee19:
draft19:
reg19:
repro19:
addressee20:
draft20:
reg20:
repro20:
addressee21:
draft21:
reg21:
repro21:
addressee22:
draft22:
reg22:
repro22:
addressee23:
draft23:
reg23:
repro23:
addressee24:
draft24:
reg24:
repro24:
addressee25:
draft25:
reg25:
repro25:
addressee26:
draft26:
reg26:
repro26:
addressee27:
draft27:
reg27:
repro27:
addressee28:
draft28:
reg28:
repro28:
addressee29:
draft29:
reg29:
repro29:
addressee30:
draft30:
reg30:
repro30:
addressee31:
draft31:
reg31:
repro31:
addressee32:
draft32:
reg32:
repro32:
addressee33:
draft33:
reg33:
repro33:
addressee34:
draft34:
reg34:
repro34:
addressee35:
draft35:
reg35:
repro35:
addressee36:
draft36:
reg36:
repro36:
addressee37:
draft37:
reg37:
repro37:
addressee38:
draft38:
reg38x:
repro38:
total_draft: 0 total_repro: 1
16_REMARKS: BLOCK C. FAR 52.227-21 -- Technical Data Declaration, Revision, and Withholding of Payment -- Major Systems. (May 2014) and DFAR part 252.227-7030 apply.
BLOCK 4: Contractor developed, Government approved, format is acceptable.
Shall include all documentation associated with the capability solution, to include:
(1) Product Manuals and Guides for all COTS products / modules in the solution
(2) Configuration description and scripts that represent the fully configured solution at the time of delivery
(3) Source code and documentation for any software developed and funded by the Government, see DFARS 252.227-7013 and 252.227-7014 - use DI-IPSC-81488 as a guide for required content
BLOCK 9: DISTRIBUTION C. Distribution authorized to U.S. Government Agencies and their contractors, Reason: Administrative and Operational Use, 29 Oct 2014. All other requests shall be referred to PdM ACWS, 200 Stovall St, Hoffman Bldg II Alexandria VA 22332
BLOCK 13: Subsequent submissions for each Build Task Order delivered 30 calendar days prior to release of each Build
BLOCK 14: Electronically delivered - reproducible in Microsoft Office formats unless otherwise approved by PdM ACWS. The Government shall have up to 15 calendar days to review for each submission.
17_PRICE_GROUP:
ESTIMATED_TOTAL_PRICE:
G_PREPARED_BY: Dr. Li-Chuan Chen, SE WIPT Lead
H_DATE: 12/16/2015
1_APPROVED_BY: Kim Reid, Deputy PdM ACWS
J_DATE: 12/16/2015
Page: 1 reg38t: 1
A_CONTRACT_LINE_ITEM_NO: 003
B_EXHIBIT: B
TDP: X
TM:
OTHER:
DSYSTEMITEM: Army Contract Writing System (ACWS)
E_CONTRACTPR_NO: TBD
FCONTRACTOR: TBD
16_REMARKS_Continued:
Page2: 2 of_pages: 3
Reset:
The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. Please do not return your form to the above organization. Send completed form to the conformance with Government requirements, and the required to perform additional work to conform to Government without conforming to Government requirements, and the contracted effort and does not require any substantial change to conform to Government requirements with regard to depth of otherwise be incurred in performance of the contract if no data were required. The estimated data prices shall not include any
1_DATA_ITEM_NO: B021
2_TITLE_OF_DATA_ITEM: Software Version Description (SVD)
3_SUBTITLE: N/A
4_AUTHORITY_Data_Acquisit: DI-IPSC-81442A
5_CONTRACT_REFERENCE: SOO 6.3.2 / PWS TBD
6_REQUIRING_OFFICE: PdM ACWS
7_DID_250_REQ: DD
8_APP_CODE: A
DIST_STATEMENT: SEE BLK 16
10_FREQUENCY: ASREQ
11_AS_OF_DATE: N/A
12_DATE_OF_FIRST_SUBMISSI: SEE BLK 16
13_DATE_OF_SUBSEQUENT_SUB: SEE BLK 16
addressee1: ACWS SE WIPT draft1:
reg1: 0 repro1: 1 addressee2: PdM ACWS COR draft2:
reg2: 1 repro2: 0 addressee3:
draft3:
reg3:
repro3:
addressee4:
draft4:
reg4:
repro4:
addressee5:
draft5:
reg5:
repro5:
addressee6:
draft6:
reg6:
repro6:
addressee7:
draft7:
reg7:
repro7:
addressee8:
draft8:
reg8:
repro8:
addressee9:
draft9:
reg9:
repro9:
addressee10:
draft10:
reg10:
repro10:
addressee11:
draft11:
reg11:
repro11:
addressee12:
draft12:
reg12:
repro12:
addressee13:
draft13:
reg13:
repro13:
addressee14:
draft14:
reg14:
repro14:
addressee15:
draft15:
reg15:
repro15:
addressee16:
draft16:
reg16:
repro16:
addressee17:
draft17:
reg17:
repro17:
addressee18:
draft18:
reg18:
repro18:
addressee19:
draft19:
reg19:
repro19:
addressee20:
draft20:
reg20:
repro20:
addressee21:
draft21:
reg21:
repro21:
addressee22:
draft22:
reg22:
repro22:
addressee23:
draft23:
reg23:
repro23:
addressee24:
draft24:
reg24:
repro24:
addressee25:
draft25:
reg25:
repro25:
addressee26:
draft26:
reg26:
repro26:
addressee27:
draft27:
reg27:
repro27:
addressee28:
draft28:
reg28:
repro28:
addressee29:
draft29:
reg29:
repro29:
addressee30:
draft30:
reg30:
repro30:
addressee31:
draft31:
reg31:
repro31:
addressee32:
draft32:
reg32:
repro32:
addressee33:
draft33:
reg33:
repro33:
addressee34:
draft34:
reg34:
repro34:
addressee35:
draft35:
reg35:
repro35:
addressee36:
draft36:
reg36:
repro36:
addressee37:
draft37:
reg37:
repro37:
addressee38:
draft38:
reg38x:
repro38:
total_draft: 0 total_repro: 1
16_REMARKS: BLOCK C. FAR 52.227-21 -- Technical Data Declaration, Revision, and Withholding of Payment -- Major Systems. (May 2014) and DFAR part 252.227-7030 apply.
BLOCK 4: Contractor developed, Government approved, format is acceptable.
BLOCK 9: DISTRIBUTION C. Distribution authorized to U.S. Government Agencies and their contractors, Reason: Administrative and Operational Use, 29 Oct 2014. All other requests shall be referred to PdM ACWS, 200 Stovall St, Hoffman Bldg II Alexandria VA 22332
BLOCK 12: Delivered 30 calendar days prior to the release of the initial Build
BLOCK 13: Subsequent submissions for Build Task Orders delivered 30 calendar days prior to the release of each subsequent Build
BLOCK 14: Electronically delivered - reproducible in Microsoft Office formats unless otherwise approved by PdM ACWS. The Government shall have up to 15 calendar days to review for each submission.
17_PRICE_GROUP:
ESTIMATED_TOTAL_PRICE:
G_PREPARED_BY: Dr. Li-Chuan Chen, SE WIPT Lead
H_DATE: 12/16/2015
1_APPROVED_BY: Kim Reid, Deputy PdM ACWS
J_DATE: 12/16/2015
Page: 1 reg38t: 1
A_CONTRACT_LINE_ITEM_NO: 003
B_EXHIBIT: B
TDP: X
TM:
OTHER:
DSYSTEMITEM: Army Contract Writing System (ACWS)
E_CONTRACTPR_NO: TBD
FCONTRACTOR: TBD
16_REMARKS_Continued:
Page2: 2 of_pages: 3
Reset:
The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. Please do not return your form to the above organization. Send completed form to the conformance with Government requirements, and the required to perform additional work to conform to Government without conforming to Government requirements, and the contracted effort and does not require any substantial change to conform to Government requirements with regard to depth of otherwise be incurred in performance of the contract if no data were required. The estimated data prices shall not include any
1_DATA_ITEM_NO: B022
2_TITLE_OF_DATA_ITEM: Configuration Audit Summary Report (FCA and PCA)
3_SUBTITLE:
4_AUTHORITY_Data_Acquisit: DI-SESS-81022D
5_CONTRACT_REFERENCE: SOO 6.3.2 / PWS TBD
6_REQUIRING_OFFICE: PdM ACWS
7_DID_250_REQ: LT
8_APP_CODE: BLANK
DIST_STATEMENT: SEE BLK 16
10_FREQUENCY: ASREQ
11_AS_OF_DATE: N/A
12_DATE_OF_FIRST_SUBMISSI: SEE BLK 16
13_DATE_OF_SUBSEQUENT_SUB: SEE BLK 16
addressee1: ACWS SE WIPT draft1:
reg1: 0 repro1: 1 addressee2: PdM ACWS COR draft2:
reg2: 1 repro2: 0 addressee3:
draft3:
reg3:
repro3:
addressee4:
draft4:
reg4:
repro4:
addressee5:
draft5:
reg5:
repro5:
addressee6:
draft6:
reg6:
repro6:
addressee7:
draft7:
reg7:
repro7:
addressee8:
draft8:
reg8:
repro8:
addressee9:
draft9:
reg9:
repro9:
addressee10:
draft10:
reg10:
repro10:
addressee11:
draft11:
reg11:
repro11:
addressee12:
draft12:
reg12:
repro12:
addressee13:
draft13:
reg13:
repro13:
addressee14:
draft14:
reg14:
repro14:
addressee15:
draft15:
reg15:
repro15:
addressee16:
draft16:
reg16:
repro16:
addressee17:
draft17:
reg17:
repro17:
addressee18:
draft18:
reg18:
repro18:
addressee19:
draft19:
reg19:
repro19:
addressee20:
draft20:
reg20:
repro20:
addressee21:
draft21:
reg21:
repro21:
addressee22:
draft22:
reg22:
repro22:
addressee23:
draft23:
reg23:
repro23:
addressee24:
draft24:
reg24:
repro24:
addressee25:
draft25:
reg25:
repro25:
addressee26:
draft26:
reg26:
repro26:
addressee27:
draft27:
reg27:
repro27:
addressee28:
draft28:
reg28:
repro28:
addressee29:
draft29:
reg29:
repro29:
addressee30:
draft30:
reg30:
repro30:
addressee31:
draft31:
reg31:
repro31:
addressee32:
draft32:
reg32:
repro32:
addressee33:
draft33:
reg33:
repro33:
addressee34:
draft34:
reg34:
repro34:
addressee35:
draft35:
reg35:
repro35:
addressee36:
draft36:
reg36:
repro36:
addressee37:
draft37:
reg37:
repro37:
addressee38:
draft38:
reg38x:
repro38:
total_draft: 0 total_repro: 1
16_REMARKS: BLOCK 4: Contractor developed, Government approved, format is acceptable.
BLOCK 9: DISTRIBUTION C. Distribution authorized to U.S. Government Agencies and their contractors, Reason: Administrative and Operational Use, 29 Oct 2014. All other requests shall be referred to PdM ACWS, 200 Stovall St, Hoffman Bldg II Alexandria VA 22332
BLOCK 12: Delivery of Functional Configuration Audit (FCA) Report no later than the tenth (10th) calendar day after completion of FCA. Delivery of Physical Configuration Audit (PCA) Report no later than the tenth (10th) calendar day after completion of PCA
BLOCK 13: No later than the tenth (10th) calendar day after subsequent FCAs and PCAs
BLOCK 14: Electronically delivered - reproducible in Microsoft Office formats unless otherwise approved by PdM ACWS. The Government shall have up to 15 calendar days to review for each submission.
17_PRICE_GROUP:
ESTIMATED_TOTAL_PRICE:
G_PREPARED_BY: Dr. Li-Chuan Chen, SE WIPT Lead
H_DATE: 12/16/2015
1_APPROVED_BY: Kim Reid, Deputy PdM ACWS
J_DATE: 12/16/2015
Page:
reg38t: 1
A_CONTRACT_LINE_ITEM_NO: 003
B_EXHIBIT: B
TDP:
TM:
OTHER: X
DSYSTEMITEM: Army Contract Writing System (ACWS)
E_CONTRACTPR_NO: TBD
FCONTRACTOR: TBD
16_REMARKS_Continued:
Page2:
of_pages:
Reset:
The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. Please do not return your form to the above organization. Send completed form to the
Item E. Self-explan
This is the start of the file's text. The full file is on GovTribe.
File details come from the government source that posted it. Updated .