W52P1J13R0156-0002.pdf

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 1. Contract ID Code Page Of

2. Amendment/Modification No.

3. Effective Date

4. Requisition/Purchase Req No.

5. Project No. (If applicable)

6. Issued By Code 7. Administered By (If other than Item 6) Code

8. Name And Address Of Contractor (No., Street, City, County, State and Zip Code)

9A. Amendment Of Solicitation No.

9B. Dated (See Item 11)

10A. Modification Of Contract/Order No.

10B. Dated (See Item 13) Code Facility Code

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

The above numbered solicitation is amended as set forth in item 14. The hour and date specified for receipt of Offers is extended, is not extended.

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing items 8 and 15, and returning ____________ copies of the amendments: (b) By acknowledging receipt of this amendment on each copy of the offer submitted; or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. Accounting And Appropriation Data (If required)

13. THIS ITEM ONLY APPLIES TO MODIFICATIONS OF CONTRACTS/ORDERS

It Modifies The Contract/Order No. As Described In Item 14.

A. This Change Order is Issued Pursuant To: The Changes Set Forth In Item 14 Are Made In

The Contract/Order No. In Item 10A.

B. The Above Numbered Contract/Order Is Modified To Reflect The Administrative Changes (such as changes in paying office, appropriation data, etc.) Set

Forth In Item 14, Pursuant To The Authority of FAR 43.103(b).

C. This Supplemental Agreement Is Entered Into Pursuant To Authority Of:

D. Other (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return _______________ copies to the Issuing Office.

14. Description Of Amendment/Modification (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

Except as provided herein, all terms and conditions of the document referenced in item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. Name And Title Of Signer (Type or print)

16A. Name And Title Of Contracting Officer (Type or print)

15B. Contractor/Offeror 15C. Date Signed 16B. United States Of America 16C. Date Signed

By (Signature of person authorized to sign) (Signature of Contracting Officer)

NSN 7540-01-152-8070

PREVIOUS EDITIONS UNUSABLE

30-105-02 STANDARD FORM 30 (REV. 10-83)

Prescribed by GSA FAR (48 CFR) 53.243

SEE SCHEDULE

X

Firm Fixed Price

0002 2015SEP29

W52P1J

ARMY CONTRACTING COMMAND - RI

ROCK ISLAND, IL 61299-8000

BLDGS 60 & 62

AARON S. LAYNE

EMAIL: AARON.S.LAYNE.CIV@MAIL.MIL

W52P1J-13-R-0156

2015AUG25

X

X 2015OCT07 04:00pm

/SIGNED/

2 signed

SEE SECOND PAGE FOR DESCRIPTION

1 6

CONTINUATION SHEET

Reference No. of Document Being Continued Page of

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

SECTION A - SUPPLEMENTAL INFORMATION

Buyer Name: AARON S. LAYNE

Buyer Office Symbol/Telephone Number: CCRC-AR/(309)782-7833

Type of Contract 1: Firm Fixed Price

Kind of Contract: Supply Contracts and Priced Orders

*** End of Narrative A0000 ***

The purpose of this amendment 0002 to solicitation W52P1J-13-R-0156 is the following;

1. Extend the solicitation closing date from 1 October 2015 to 7 October 2015 at 1600 hours Central time.

2. To add to Solicitation W52P1J-13-R-0156, ATT 0009-Solicitation W52P1J-13-R-0156 Q&A.

3. Clause 52.246-4520 (ACC-RI) Ammunition Data Card Sept 2014 is hereby updated to change the drawing number for the M115A2 Flash

Composition from 12972321 to 12972326.

4. DFAR Clause 252.204-7012 Safeguarding of Unclassified Controlled Technical Information Nov 2013 is hereby updated.

All other terms and conditions of Solicitation W52P1J-13-R-0156 remain unchanged and applicable.

*** END OF NARRATIVE A0003 ***

2 6

W52P1J-13-R-0156 0002

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

SECTION E - INSPECTION AND ACCEPTANCE

Status Regulatory Cite Title Date Status Regulatory Cite Title Date _______ _______________ ______________________________________________________________________ ____________ _______ _______________ ______________________________________________________________________ ____________

E-1 CHANGED 52.246-4520 AMMUNITION DATA CARDS SEP/2014

(ACC-RI)

Detailed requirements and guidance for the preparation of Ammunition Data Cards (ADCs) and Ammunition Lot Numbers are contained in MIL-

STD-1168, DI-MISC-80043 and the Worldwide Ammunition-data Repository Program (WARP) online user's manual. Detailed requirements for obtaining and using a manufacturer's identification symbol, which is an integral component of the ammunition lot number, can be found in

MIL-STD-1168 and the WARP users manual. Information provided in paragraphs 6.7 through 6.16 of MIL-STD-1168 shall be considered mandatory requirements where all instances of the term "should" are considered to be replaced with the word "shall."

(a) The contractor shall develop and submit ADCs in accordance with the requirements of this clause, MIL-STD-1168, and the user's manual located on the WARP database. The WARP application is accessed through the Munitions History Program (MHP) website. (Refer to the clause in Section C of this contract entitled "Statement of Work - Ammunition Data Cards, Report of Contractor Ballistic/Function

Testing" for more information.) The ADC requirement is a flow-down requirement that applies to contractors and their suppliers, vendors or subcontractors.

(b) The contractor shall prepare an ADC for each lot of item(s) being produced under this contract, regardless of whether or not those lots are accepted or rejected by the Government. The ADC shall comply with MIL-STD-1168 and WARP requirements.

(c) Unless otherwise authorized by the Procuring Contracting Officer, the contractor shall include, in the components sections on the

ADC representing the deliverable item, as a minimum; all assemblies, sub-assemblies, components, explosives, and propellants listed below for the item being procured.

End Item Component Listing:

The following is for the M115A2:

Nomenclature: Simulator, Projectile, Ground Burst, M115A2

PN:13019987 NSN:1370-01-557-8527 DODIC:L594

Drawing Number Nomenclature

12972326 Flash Composition

12972564 Binder, cellulose Nitrate-Camphor

7549218 Sleeve

7549227 Whistle Loading Assembly

7549228 Disc

7549229 Tube, Outer

7549233 Tube, Spacer

7549234 Cover Assembly

7549245 Tube, Inner

8833714 Ferrule

8833721 Igniter, Blasting Fuse, Friction Type

8865589 Disc & Washer Assembly

9212301 Adhesive

9256477 Priming Paste

9345134 Fuse Cord, Safety

9345144 Glue, Hot Melt

The following is for the M116A1:

Nomenclature: Simulator Hand Grenade Assembly, M116A1

PN:9256467-1 NSN:1370-01-614-5083 DODIC:L601

Drawing Number Nomenclature

12912921 Support, Priming Paste

12972327 Aluminum Powder, Flaked

12972564 Binder, Cellulose Nitrate-Camphor

13013011 Tube, Spacer

8833714 Ferrule

8833721 Igniter, Blasting Fuse, Friction Type

8835120 Label

9212301 Adhesive

9256461 Disc

9256462 Disc, Upper

9256464 Tube, Inner

9256465 Tube, Outer

3 6

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

9256477 Priming Paste

9345134 Fuse Cord, Safety

9345144 Glue, Hot Melt

MIL-P-00223 Powder, Black

(d) The component items identified below are from paragraph (c) above and will require their own component ADC in addition to being listed on the end item ADC. The component ADCs shall also comply with MIL-STD-1168 and WARP requirements.

The following is for the M115A2:

Nomenclature: Simulator, Projectile, Ground Burst, M115A2

PN:13019987 NSN:1370-01-557-8527 DODIC:L594

Drawing Number from paragraph (c) above 8833721, components as follows:

Component Drawing Number Nomenclature

8833712 Tube

8833717 Sleeve

9212301 Adhesive

8833713 Clip,Safety

The following is for the M115A2:

Nomenclature: Simulator, Projectile, Ground Burst, M115A2

PN:13019987 NSN:1370-01-557-8527 DODIC:L594

Drawing Number from paragraph (c) above 12972326, components as follows:

Component Drawing Number Nomenclature

12972327 Aluminum Powder

MIL-P-223 Black Powder

(e) Lot numbers shall be in accordance with MIL-STD-1168 lot number convention and the technical data package requirements. Lot numbers shall be used for all ammunition end items and their major components, including inert, dummy, or non-energetic items and components. When not required by technical data package and not an end item or major component, the component lot number may be constructed through contractor lot number convention.

(f) The flowdown of the requirement for component ADCs generated via WARP is highly encouraged for other items not identified in paragraph (d) above when the prime contractor is purchasing components, assemblies, and subassemblies from subcontractors or vendors.

(g) All component RFD/ECPs shall be listed on the ADC for the deliverable item, as well as on the component ADC, when that component is identified in paragraph (d) above. The WARP user's manual provides information on the level of detail required.

(h) A sample ADC shall be developed and submitted to the WARP system 30 days prior to First Article testing or 30 days prior to production in the event a first article is not required. The WARP ADC program will not allow the submission of additional ADCs until such time as the sample ADC has been approved in the system.

(ES6200) (End of clause)

4 6

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

SECTION I - CONTRACT CLAUSES

Status Regulatory Cite Title Date Status Regulatory Cite Title Date _______ _______________ ______________________________________________________________________ ____________ _______ _______________ ______________________________________________________________________ ____________

I-1 CHANGED 252.204-7012 SAFEGUARDING COVERED DEFENSE INFORMATION AND CYBER INCIDENT REPORTING AUG/2015

5 6

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

SECTION J - LIST OF ATTACHMENTS

List of Number List of Number

Addenda Title Date of Pages Transmitted By Addenda Title Date of Pages Transmitted By________________ ____________________________________________________________ _______________ ____________ _______________________________ ____________________________________________________________ _______________ ____________ _______________

Attachment 0009 ATT 0009-SOLICITATION W52P1J-13-R-0156 Q&A 004

6 6