DRAFT_W51EW726RA004-0002_30Mar2026.pdf

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offers is extended. is not extended.

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods:

(a) By completing items 8 and 15, and returning copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or electronic communication which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER.

If by virtue of this amendment you desire to change an offer already submitted, such change may be made by letter or electronic communication, provided each letter or electronic communication makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NUMBER AS DESCRIBED IN ITEM 14.

CHECK ONE A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT ORDER

NUMBER IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation data, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print) 16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

15B. CONTRACTOR/OFFEROR

(Signature of person authorized to sign)

15C. DATE SIGNED 16B. UNITED STATES OF AMERICA

(Signature of Contracting Officer)

16C. DATE SIGNED

Previous edition unusable STANDARD FORM 30 (REV. 11/2016) Prescribed by GSA FAR (48 CFR) 53.243

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 1. CONTRACT ID CODE PAGE OF PAGES

2. AMENDMENT/MODIFICATION NUMBER 3. EFFECTIVE DATE 4. REQUISITION/PURCHASE REQUISITION NUMBER 5. PROJECT NUMBER (If applicable)

6. ISSUED BY CODE 7. ADMINISTERED BY (If other than Item 6) CODE

8. NAME AND ADDRESS OF CONTRACTOR (Number, street, county, State and ZIP Code) (X) 9A. AMENDMENT OF SOLICITATION NUMBER

9B. DATED (SEE ITEM 11)

10A. MODIFICATION OF CONTRACT/ORDER NUMBER

10B. DATED (SEE ITEM 13)

CODE FACILITY CODE

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

Section A - Solicitation/Contract Form

The following changes have been made:

Miscellaneous text in this section has been modified to:

The following RFP Section L instructions and requirements are amended as shown via the "FROM / TO" for paragraph L.3.1.3 below.

FROM:

L.3.1.3 Subfactor Three: Sample Test, Sample Task Order Proposal (TOP) The Offeror shall provide a complete TOP in accordance with CDRL A003* and the elements below, for the Sample Task Order as provided at RFP Attachment 2 (A2). TOP Attachments are not subject to page limitations at L.2.3 but are restricted to ten (10) total pages. *Offerors shall note, the TOP proposed at Volume I shall include the job position/labor category and man hours required at CDRL A003 16.4(a), but all proposed costs required under 16.4 shall be included in Volume III, as applicable (i.

e., within the Offeror's cost narrative and A4 Pricing Matrix).

TO:

L.3.1.3 Subfactor Three: Sample Test, Sample Task Order Proposal (TOP) The Offeror shall provide a complete TOP in accordance with CDRL A003* and the elements below, for the Sample Task Order as provided at RFP Attachment 2 (A2). *Offerors shall note, the TOP proposed at Volume I shall include the job position/labor category and man hours required at CDRL A003 16.4 (a), but all proposed costs required under 16.4 shall be included in Volume III, as applicable (i. e., within the Offeror's cost narrative and A4 Pricing Matrix). TOP Attachments subject to Volume I (i.

e., cover letter, technical approach via Power Point) may be addressed within the Offeror's Technical / Mission Capability proposal (i.e., within the 60-page limit of Volume I), but said Attachments are authorized up to an additional fifteen (15) pages beyond the page limitations at L.

2.3, with no further exclusions. As stated, Cost Attachments are required for submission under Volume III.

Section L, as amended is replaced in its entirety within Section L herein.

W51EW726RA0040002

Section L - Instructions, Conditions, & Notices to Offerors or Quoters

Miscellaneous text in this section has been modified to:

L.1 Information to Offerors and Instructions for Proposal Preparation

L.1.1 Offerors shall strictly adhere to requirements herein when preparing the proposal submission in response to this RFP. The Government will NOT reimburse any costs incurred in response to this RFP. Proposals that fail to comply with the proposal submittal requirements set forth in this section may be deemed unacceptable, and therefore ineligible for award. Proposals shall be submitted specified within this RFP. Proposals received after PRIOR TO THE DATE AND TIME the date and time specified for receipt of proposals will be handled in accordance with FAR 15.208.

L.1.2 All RFP documents, to include any amendments issued after RFP issuance, shall be posted to Contract Opportunities at SAM.gov. It is the offeror's responsibility to monitor the website for any amendments to the solicitation and incorporate any signed amendments within the offeror's proposal submission.

L.1.3 To ensure timely and equitable evaluation of proposals, offerors must follow the instructions contained herein. Offerors are required to meet all solicitation requirements, including terms and conditions, representations and certifications, and technical requirements, in addition to those identified as evaluation factors and subfactors. Offerors must clearly identify any exception to the solicitation terms and conditions and provide complete accompanying rationale for Government evaluation. The submitted proposal shall consist of four (4) separate volumes, and the standalone Proposal Cover Letter as follows:

Volume Volume Title

N/A Proposal Cover Letter

Volume I Technical / Mission Capability

Volume II Past Performance

Volume III Cost / Price

Volume IV Solicitation, Offer and Award Documents, and Certifications / Representations

L.1.4 Offeror Questions. Offerors may submit questions regarding the RFP to the Government Points of Contact (POC) listed herein up to 4:30 PM EDT 17 MAR 2026. Depending on the volume of questions received, the acquisition team will work to post responses via Contracting Opportunities at SAM.gov by close of business Friday, each week, through the last questions response posting, on/about 20 MAR 2026. The intent of question responses is to provide clarifying information to all Offerors. NOTE: The solicitation will remain unchanged unless specifically amended in writing.

Primary POC: Contract Specialist, Avangela Ligons-Sutton, avangela.y.ligons-sutton.

civ@army.mil

Secondary POC: Contracting Officer, Ingrid Smith, ingrid.v.smith.civ@army.mil

L.1.5 . Proposals shall be valid for 270 days from the date of RFP close. The Proposal Validity Offeror shall clearly state confirmation of such within Volume IV. An Offeror who fails to confirm proposal validity or proposes a validity period less than the Government's requirement may be rejected.

L.2. Proposal Submission Requirements

L.2.1 Proposal Due Date. Proposals are due no later than 4:30 PM EDT on 08 APR 2026. Late proposals may be rejected from consideration IAW FAR 15.208. It is the Offeror's responsibility to confirm the Government has received the proposal prior to the specified due date and time.

L.2.2 Procurement Integrated Enterprise Environment (PIEE). This solicitation will accept proposals SOLELY through the Solicitation Module of the PIEE suite, located at https://piee.ed.mil/ . Proposal submissions sent by any other method, to include proprietary or third-part File Transfer Protocol sites, DoD SAFE or by any other means will not be retrieved or evaluated.

L.2.2.1 Offerors responding to a solicitation must either self-register for a PIEE account and add the appropriate roles, or, for existing PIEE users, access their account and add additional roles. Offerors must be registered in PIEE to access and submit responses to a solicitation in PIEE. Offerors are encouraged to register as soon as practicable to this and future opportunities.

L.2.2.1.1 Subcontractors, major or otherwise, who elect to submit cost proposal data direct to the Government shall follow the same Offeror instructions for PIEE account and submission above. In addition, the subcontractor proposal package shall include a one-page, Adobe PDF cover letter

W51EW726RA0040002

https://piee.ed.mil/ indicating the subcontractor proposal is a part of Prime Offeror Proposal INSERT PRIME

OFFEROR NAME.

L.2.2.2 . Training material and guides for registering and submitting proposals PIEE Resources can be found below and is provided to assist in locating the full scope of resources available at the PIEE website. PIEE Solicitation Module Training is available at the following:

https://pieetraining.eb.mil/wbt/xhtml/wbt/sol/index.xhtml https://pieetraining.eb.mil/wbt/xhtml/wbt/sol/solicitation/proposals.xhtml

L.2.2.3 There are two Offeror roles (Proposal Manager and Proposal View Only) for the PIEE Solicitation Module. The Proposal Manager role is required to submit a proposal, to include Final Proposal Revisions (FPRs), if applicable/required to the solicitation herein, and all solicitations posted in the PIEE Solicitation Module. Additionally, be advised when using the PIEE Solicitation Module, the User's email address in PIEE must match the email address on file in SAM.gov.

L.2.3 The following Volumes of material and proposal content shall be submitted:

Volume Volume Title Maximum Pages*

N/A Proposal Cover Letter 1**

Volume I Technical/Mission Capability 60

Volume II Past Performance 30***

Volume III Cost / Price No page limitation

Volume IV Solicitation, Offer and Award Documents, and Certifications / Representations

No page limitation https://pieetraining.eb.mil/wbt/xhtml/wbt/sol/index.xhtml https://pieetraining.eb.mil/wbt/xhtml/wbt/sol/solicitation/proposals.xhtml

* Pages that exceed the established page limitations will NOT be evaluated or considered.

**Proposal Cover Letter is a standalone PDF file/page to include requirements at FAR 52.215-1(c) (2).

**See L.3.2.1.

L.2.4 Page Format, Size, Packaging

L.2.4.1 . The submission shall be clearly indexed and logically assembled. Each volume Format shall be clearly identified and shall begin at the top of a page. All pages of each volume shall be appropriately numbered and identified by the date and RFP number in the header and/or footer. A Table of Contents should be created using the Table of Content feature in MS Word. MS Word (doc) files shall use the following page setup parameters prior to conversion to PDF:

Margins - Top, Bottom, Left, Right - 1"

Gutter - 0"

From Edge - Header, Footer 0.5"

Page Size, Width - 8.5"

Page Size, Height - 11"

L.2.4.1.1 All proposal information shall be in the English language and U.S. Dollars. Proposal information not in the English language or U.S. Dollars will not be considered and will be cause for the proposal to be rejected.

L.2.4.2 . Each paragraph should be single spaced and shall be separated by at least one Size blank line. A standard, 12-point minimum font size applies. Arial or New Times Roman fonts are required. Tables and illustrations may use a font size no less than 10-point and may be produced in landscape mode.

L.2.4.3 . Files shall be in read-only format, using PDF files. All price breakdown Packaging information to aid in the cost/price evaluation shall be submitted in Microsoft Office Excel Read /Write format and viewable in Microsoft Excel 2016 or newer. Each file shall be labeled/titled with the volume number, date, and the Offeror's name (with the exception of Volume I, as required at L.

2.5.1 below).

L.2.5 . The proposal shall be clear, concise, and shall include sufficient detail for Proposal Content effective evaluation and for substantiating the validity of stated claims. The proposal shall not simply rephrase or restate the Government's requirements, but rather shall provide convincing rationale to address how the offeror intends to meet those requirements. Offerors shall assume the Government has no prior knowledge of their organization and experience and will base its evaluation on the information presented in the offeror's proposal.

L.2.5.1 Volume I and contents within proposal pages, including appendices, Table of Contents, Title Pages, Glossary, Dividers/Tabs, Blank pages and throughout the digital copies of the Technical / Mission Capability Volume of the proposal shall NOT contain company logos and/or names, pictures or any information that indicates the Offeror's (to include all team members) identification or personnel. The Technical / Mission Capability Volume shall not contain any pictures that identify Offeror personnel or Government personnel. No quotes or statements made by Government personnel in prior acquisition efforts shall be contained within Volume I of the Offeror's proposal. Each proposal Volume (I-Technical / Mission Capability, II-Past Performance, III-Cost / Price, IV- Solicitation, Offer and Award Documents, and Certifications / Representations) shall be submitted as a separate Volume file, and IAW instructions at L.2.2 and its subparts.

L.2.5.2 Each Volume of the proposal shall consist of a Title Page, Table of Contents, Summary Section, and the Narrative discussion. The Summary Section shall contain a brief abstract of the file. Proprietary information shall be clearly marked. The Narrative discussion shall include information as required at L.3 and all subparts.

L.2.5.2.1 The following requirements are excluded from the page limitations set forth at L.2.3:

Summary Section per L.2.5.2

Key Personnel Resumes per L.3.1.2.3

Summary per L.3.2.1

Consent and Letters of Commitment per L.3.2.2.1, L.3.2.5 and L.3.2.6

Section 3 information per L.3.2.5, but limited as specified therein

PPQs and POC List per L.3.2.7 and L.3.2.7.1

Any proposal requirement omitted from this list that expressly states an exception to page limitations shall also apply. In addition, administrative pages that do not contain proposal content such as Title Pages, Table of Contents, List of Tables / Figures, Acronym & Abbreviation Lists, Section Dividers, and/or Cross Reference Matrices are excluded from page limitations at L.2.3.

L.3 Evaluation Factors

L.3.1 Volume I, Factor One: Technical / Mission Capability

Offerors shall provide a proposal that addresses the elements at the Technical / Mission Capability subfactors herein.

L.3.1.1 . The Offeror shall demonstrate, in detail, the Subfactor One: Technical Approach approach and understanding needed to execute and successfully phase-in and perform base support requirements and all elements of field test services, as outlined in the PWS, through contract phase-out.

L.3.1.1.1 The Offeror shall provide sufficient detail and rationale to substantiate the stated capabilities and methods to support functions of management, information technology, environmental services, logistics functions to include supply operations, vehicle maintenance, purchasing, facility, and motor pool operations (Fort Hood and Fort Bliss). PWS Section 5.1.1.

L.3.1.1.2 The Offeror shall describe its abilities to support all elements of operational tests and events. This includes field test services required to support operational test events in data collection, data entry, test documentation and logistics as outlined in PWS Sections 5.2.1 and 5.2.18.

L.3.1.1.3 The Offeror shall demonstrate the ability to successfully support multiple requirements in an environment marked by changing timelines. The Offeror's shall discuss how to accommodate fluctuating workloads, and its approach to rapid increases and decreases to workload, detailing the approach/methodology to regular time to overtime.

L.3.1.1.4 The Offeror shall describe its plan for recruitment, retention, and skills refreshment and training to demonstrate BTSS mission success with an approach to ensure that personnel are qualified with the requisite knowledge, skills, training, certification, and experience to successfully and without significant risk, execute the task areas set forth in the PWS. The Offeror shall address its methodology in retaining qualified personnel and how it intends to minimize turnover, retain qualified personnel with unique specialized expertise while demonstrating the capability to meet, sustain, and grow the personnel resources as needed to continue to perform Base Operations and Field Test Services to meet workload requirements. Additionally, the Offeror shall address how full performance of services are maintained during employee absences. Finally, the Offeror shall address any potential personnel risks and provide mitigation strategies for these identified risks in order to meet technical requirements of the PWS.

L.3.1.1.5 The Offeror shall describe its approach, and risk identification and mitigation strategies, for a successful contract phase in and transition as set forth at PWS Section 1.21.1 and its subparts. In detailing the Offeror's approach to phase-in, at a minimum, the Offeror shall include:

1. The Offeror's Transition Plan, to include the schedule and staffing and critical milestones.

2. The Offeror's approach to assuming total contract responsibility without disruption or degradation of performance during the transition period AND initial contract execution.

3. Identification of risks and proposed mitigation strategies.

4. Identification of the Offeror qualified resources available to immediately begin work.

5. When resources are not currently on hand, the Offeror's approach to ensure availability of trained and qualified personnel.

L.3.1.1.6 The Offeror shall describe its approach, and risk identification and mitigation strategies for a successful contract phase out as set forth in PWS Section 1.21.2. In detailing the Offeror's approach to phase-out, at a minimum, the Offeror shall include:

1. Critical milestones necessary for seamless contract phase-out.

2. Identification of risks and proposed mitigation strategies.

3. Identification of any lessons learned from prior contract phase-out actions and recommendations for Government consideration.

L.3.1.2 The Offeror shall detail and Subfactor Two: Management & Execution Approach describe its management and execution approach to include its organizational and management structure, to include Joint Venture (JV) relationships, major subcontractors*, and/or teaming partner relationships, key personnel qualifications, financial management, quality control process and procedures, cost management, and continuous process improvement methods, and the interdependencies among all aspects to lead to successful execution of the PWS requirements. *A major subcontractor, as referenced throughout the proposal requirements is defined as a member of an Offeror's overall team whose subcontract is valued at or more than $5M of the total proposed cost.

L.3.1.2.1 The Management and Execution section shall discuss the overall management approach to support and perform BTSS in support of the OEC customer(s). The discussion shall include the oversight & control, alignment, communication, improvements, and innovation that will ensure successful execution and performance of the PWS requirements.

L.3.1.2.2 The Offeror shall detail its organizational and management structure in an organizational chart(s) demonstrating teaming arrangements, functional and supervisory lines of control, and roles and responsibilities assigned to successfully accomplish OEC BTSS mission requirements. The Offeror shall demonstrate, through the organizational chart and associated narrative, its approach to prime / subcontract integration with identified personnel numbers, skill categories, and labor hours (i.e., full or part time), decision-making, managing quality control, managing fluctuations and variations in workload, and problem resolution. Additionally, the Offeror shall substantiate why the organizational and management structure proposed is designed to ensure successful contract execution and performance. Organizational charts may be submitted via 11x17 page format, an exception to the page format specified at L.2.4.2 above. Each 11X17 page counts as one-page toward page limitations at L.2.3.

L.3.1.2.3 The Offeror shall provide resumes for key personnel identified in PWS Section 1.10 and its subparts. Resumes shall be limited to three (3) pages each (IAW page format instructions at L.

2.4.1) per resume submission and are excluded from the page limitations at L.2.3. To ensure compliance with L.2.5.1, resumes shall not identify personnel by name or company affiliation /identification or said information shall be redacted accordingly. Use of position titles and location is acceptable.

L.3.1.2.4 The Offeror shall describe its financial management structure, approach and capability to ensure timely and successful performance of the PWS. The Offeror shall describe capabilities to fund requirements at day one, while also adapting to fluctuations in demand and surges over the five-year contract term along with identification of financial risks and mitigations in place or planned. The Offeror shall describe experience in supporting volatile workloads and how its financial management system and capability was leveraged for success.

L.3.1.2.5 The Offeror shall describe its Quality Control methodology that provides and maintains quality services and identifies and corrects deficiencies and/or discrepancies. In addition, the Offeror's shall describe its ability to successfully develop and implement a Quality Control Plan with effective processes and procedures utilized to identify and correct instances of non-conforming services as well as preventing the re-occurrence of non-conforming services. The approach shall address and ensure compliance with the requirements specified in PWS Section

1.5.1. The Offeror shall describe the continuous process improvement methods and techniques the Offeror shall implement in this contract.

L.3.1.2.6 The Offeror shall describe its approach for reducing and controlling costs, business processes, and policies to perform sound fiscal stewardship over funds during contract performance.

L.3.1.2.7 IAW FAR 45.201(c)(4), the proposal shall include a description of the Offeror's property management system, plan, and any customary commercial practices, voluntary consensus standards, or industry-leading practices and standards to be used by the Offeror in managing Government property.

L.3.1.3 Subfactor Three: Sample Test, Sample Task Order Proposal (TOP) The Offeror shall provide a complete TOP in accordance with CDRL A003* and the elements below, for the Sample Task Order as provided at RFP Attachment 2 (A2). *Offerors shall note, the TOP proposed at Volume I shall include the job position/labor category and man hours required at CDRL A003 16.4 (a), but all proposed costs required under 16.4 shall be included in Volume III, as applicable (i. e., within the Offeror's cost narrative and A4 Pricing Matrix). TOP Attachments subject to Volume I (i.

e., cover letter, technical approach via Power Point) may be addressed within the Offeror's Technical / Mission Capability proposal (i.e., within the 60-page limit of Volume I), but said Attachments are authorized up to an additional fifteen (15) pages beyond the page limitations at L.

2.3, with no further exclusions. As stated, Cost Attachments are required for submission under Volume III.

L.3.1.3.1 The Offeror shall describe its technical approach to support the Sample Test, A2 to include all technical information, field test procedures, and assignment of responsibilities necessary to demonstrate the required technical knowledge to execute the Sample Test and resulting (fictional) Task Order. The Offeror shall identify the total staffing solution (i.e., exempt and Department of Labor skill categories), hours per skill category, and the employment categories (e.

g., core, full-time test support, part-time test support, etc.) applicable to the effort described in the TO-RFP and the Offeror's proposed solution.

L.3.1.3.2 The Offeror shall demonstrate its methodology from acceptance of TO-RFP requirements, planning, scheduling, test execution, and post-test/recovery, to include milestones.

L.3.1.3.3 The Offeror shall identify the support or resources required from the Government or other outside sources in order to execute the Sample Test requirement. The Offeror shall include the rationale for the required/needed support and the impact to base operations and the test mission if not provided.

L.3.1.3.4 The Offeror shall address challenges presented by the technical requirements and propose solutions for the Sample Test TO-RFP. The Offeror shall identify risks in meeting the Sample Test requirements and propose mitigations for each risk identified, assigning a rating to the criticality of the risk (i.e., low, medium or high) based on impact to mission success and the probability of success of the proposed mitigations.

L.3.2 Volume II, Factor Two: Past Performance

L.3.2.1 This volume shall contain past performance information regarding similar contracts and shall be organized into sections as outlined below. This volume shall not exceed 20 pages of offeror / prime past performance information (including past performance of individual JV partners) plus five pages for each major subcontractor or, teaming partner entry, with a maximum of two (thus, a maximum allowable page limitation of 30 pages). This volume shall include a summary, excluded from the page limitations herein, describing the role of the offeror (to include JV partner roles) and each subcontractor and / or teaming partner. The summary shall also include a reference to the past performance contracts and their respective PWS paragraph(s) cited for each team member and the associated tasks from the BTSS Follow-on PWS represented by each cited contract and its PWS.

L.3.2.2 Offerors shall submit up to four (4) Government contracts for the prime offeror (including past performance of individual JV partners, with a minimum of two cited contracts from the managing JV partner) and up to two (2) from major subcontractors and / or teaming partners in performance or awarded during the past three years, from the issue date of this RFP, which are relevant to the efforts required by this solicitation. Accordingly, recent is defined as contract performance within 3 years of RFP issue date. Relevant efforts are defined as services/efforts that are the same as or similar to the effort in scope, magnitude and complexity required by the RFP. Data concerning the offeror shall be provided first, followed by each proposed major subcontractor, in alphabetical order.

L.3.2.2.1 . The Offeror shall submit written consent of its JV Consent and Letters of Commitment partners, major subcontractors, and / or team partners to allow disclosure of past performance information to the Offeror. In addition, letters of commitment shall be included for all JV partners, major subcontractors, and / or teaming partners cited in order for past performance to be considered, with letters also identifying the specific work scope to be performed and level of support the entity is committing to offer for BTSS and OEC mission success. Level of support is defined as designated workshare or the estimated portion of contract cost the team member (e.g., prime, JV entity, and/or subcontractor) is proposed to support. Consent and Letters of Commitment are excluded from page limitations specified.

L.3.2.3 . Contracts cited within the Past Performance proposal Section 1: Contract Descriptions shall include the following information:

1. Offeror / Subcontractor place of performance, CAGE Code and Unique Entity Identifier (UEI). If the work was performed as a subcontractor, also provide the name of the prime contractor and POC within the prime contractor organization (name, and current address, email address, and telephone number).

2. Government contracting activity / customer, and current address, email address, and telephone numbers for the following personnel:

a. Administrative Contracting Officer.

b. Government's technical representative/COR.

3. Contract Number and, in the case of Indefinite Delivery type contracts, GSA contracts, and Blanket Purchase Agreements, include Delivery Order Numbers.

4. Contract Type (specific type such as Fixed-Price (FP), Cost Reimbursement (CR), Time & Material (T&M), etc.). In the case of Indefinite Delivery contracts, indicate specific type (Requirements, Definite Quantity, and Indefinite Quantity) and secondary contract type (FP, CR, T&M, etc.).

5. Awarded price / cost.

6. Final or projected final price / cost.

7. Original delivery schedule, including dates of start and completion of work.

8. Final or projected final, delivery schedule, including dates of start and completion of work.

L.3.2.4 Section 2: Contract Performance. Offerors shall provide a specific narrative explanation of each contract cited at L.3.2.3, describing the objectives achieved and detailing how the effort is relevant to the OEC BTSS requirement, identifying specific elements of the PWS herein, by PWS paragraph number, that were performed on the cited contract.

L.3.2.4.1 For any contracts that did not / do not meet original schedule or technical performance requirements, provide a brief explanation of the reason(s) for the shortcomings and any corrective action(s) taken to avoid recurrence. The Offerors shall list each time the delivery schedule was revised and provide an explanation of why the revision was necessary. All Requests for Deviation and Requests for Waiver shall be addressed with respect to causes and corrective actions. The Offerors shall also provide copy of any Cure Notices or Show Cause Letters received on each contract listed and a description of any corrective action implemented by the Offeror (including individual JV partners) or proposed subcontractor and / or teaming partner. The Offerors shall indicate if any of the contracts listed were terminated and the type and reasons for the termination.

L.3.2.5 Section 3: Subcontracts. Offerors shall provide an outline of how the effort required by the RFP will be assigned for performance within the Offeror's corporate entity (to include JVs) and among the proposed subcontractors and / or teaming partners, as required at L.3.2.1. The information provided for the prime Offeror (including individual JV partners) and each proposed major subcontractor and / or teaming partners, must include the entire company name, company address, CAGE Code, UEI and type of work to be performed by citing the applicable Government PWS subparagraph number. This includes all subcontractors, previously defined as a member of the Offeror's team whose subcontract is valued at or more than $5M of the total proposed cost. Subcontractor consent and letters of commitment as specified at L.3.2.2.1 shall be included for all JV partners, subcontractors, and / or teaming partners proposed. Proposal information for Section 3 is excluded from the page limitations at L.3.2.1, however, response to Section 3 shall not exceed five (5) pages, excluding Letters of Commitment, identified as excluded from page limitation requirements at L.3.2.2.1 above.

L.3.2.6 Section 4: New Corporate Entities. New corporate entities may submit data on prior contracts involving its offices and employees. However, in addition to the other requirements in this section, the Offeror shall discuss in detail the role performed by such persons in the prior contracts cited. Past Performance data shall be included as described at L.3.2.3 and L.3.2.4 above and is subject to the page limitations at L.3.2.1 (i.e., a new entity proposing as the prime may address requirements at L.3.2.3, L3.2.4 and L.3.2.6 through the 20 page limitation at L.3.2.1 or as a major subcontractor, citing up to 2 prior contracts (and requirements at L.3.2.6) at 5 pages each for the total maximum 30 page limitation (all past performance contracts). Additionally, Letters of Commitment shall be included in the proposal for these employees in order to be considered. Letters of Commitment are excluded from the page limitation requirement.

L.3.2.7 Section 5: Past Performance Questionnaire. For all contracts identified in Section 1, Contract Descriptions, a Past Performance Questionnaire, incorporated as Attachment 3 must be completed and submitted. The Offeror shall complete Part I of the Past Performance Questionnaire and e-mail the questionnaire to both the Government contracting activity and Government technical representative responsible for the past / current contract. The Government POCs shall be instructed to electronically complete Part II of the questionnaire and e-mail the entire questionnaire to the Contracting Office no later than the proposal due date, to ingrid.v.smith.

civ@army.mil AND avangela.y.ligons-sutton.civ@army.mil. For subcontractor performance on a Government contract, the Offeror may complete two (2) PPQs for said individual Government contract. The first PPQ may be completed by the prime contractor. The second PPQ must include the Government POC information at Part I, completed by the Offeror. Part II will be left incomplete.

The second PPQ shall be submitted to the aforementioned Contracting Office POCs for Government-to-Government coordination and PPQ response. Offerors shall note, evaluation of the Government PPQ response will carry a greater weight than the prime contractor PPQ response.

L.3.2.7.1 No later than the proposal due date and time, the Offeror shall e-mail the Contracting Office POCs above, a complete list of all Government POCs the Offeror sent a questionnaire. The Offeror Questionnaire POC List shall be submitted in PDF Format to include the following fields: Solicitation Number; Company Name; Contract Number; Government Agency; POC Last Name, First Name; POC Title; POC Telephone Number; POC E-mail Address; and Date E-Mail to

1.

2.

3.

4.

5.

6.

POC via DD/MMM/YYYY format. Past Performance Questionnaires, and the POC List required, are excluded from any page limitations identified in Volume II.

L.3.3 Volume III, Factor Three: Cost / Price

L.3.3.1 General Information / Instructions

All information relating to the proposed price, including all required supporting documentation, must be included in the section of the proposal designated as Volume III, Cost / Price. Under no circumstances shall this information and documentation be included elsewhere in the proposal.

Failure to comply with the below proposal preparation instructions may deem an Offeror's proposal as noncompliant and therefore ineligible for award.

L.3.3.2 All Offerors shall provide evidence to support that they have an adequate accounting system for the purposes of administering a cost-type contract. The following are acquisition regulations regarding the requirement for an acceptable accounting system and how the Offeror can have their accounting system determined acceptable: DFARS 242.7502, FAR 16.301-3(a)(3), FAR 53.209-1, to include completion of the SF-1408, and DFARS 252.242-7006. If the Offeror's accounting system, the system for a JV, or a subcontractor's accounting system has not been reviewed by Defense Contract Audit Agency (DCAA) or an independent audit agency other than DCAA, it shall submit the following information:

Company's Full Name;

UEI and Cage Code;

Company's Point of Contact (POC), email address, and phone number;

Company address where accounting records are held;

Cognizant Defense Contract Management Agency (DCMA) and DCAA Office (Address, POC, Phone number and Email address);

Whether it will be an Offeror (Prime), to include JV entities of the prime OR if it is a Major Subcontractor as defined at L.3.1.2 above AND entering into a cost-type contract with the prime.

The above information shall be sent by email to the Contract Specialist, Ms. Avangela Ligons- Sutton (avangela.y.ligons-sutton.civ@army.mil) no later than seven (7) calendar days after release of the RFP to initiate an accounting system review by DCAA. The email subject line should read:

"W51EW7-26-R-A004 Request for Accounting System Review." (*If the Offeror has already submitted a request when the solicitation was first released, another request is not necessary.)

L.3.3.3 The Cost/Price Volume shall be clearly marked. "Volume III, Cost / Price, W51EW7-26-R- A004." The Cost/Price Volume shall consist of a Cost Section and a Narrative Section. Electronic versions of the Cost / Price Volume will be submitted in Microsoft Office Excel format (2016 or newer) only. The one exception is for the Narrative Section, to be submitted via PDF format. All formulas, lookup tables, and links shall be intact, and no links shall exist to files not included with the submission. Spreadsheets shall not contain hidden rows, columns or cells. Each worksheet shall be labeled to indicate its contents. Spreadsheets shall not be password protected. The Cost / Price Volume shall be organized as follows and contain the following information:

L.3.3.3.1 Cost Section: The Offeror shall complete Attachment 4 (A4) "Pricing Matrix." In addition, a separate spreadsheet (Offeror's format) or a separate tab within the provided Pricing Matrix is required to provide the cost breakdown for each proposed labor category. The cost breakdown should show the calculations for each labor category to include all costs as part of the Offeror's submission (e.g., labor burdens, indirect rates, fee, etc.). The Offeror shall ensure that the amounts included in their cost breakdown match the amounts included in the Pricing Matrix. The Offeror shall provide unit prices that, when multiplied by the quantity, equal an extended price that does not require rounding beyond a whole penny/cent. While not subject to Schedule B, Offerors shall ensure A4 completion of Labor Build-up tabs, to include the Sample TOP, with the same level of cost breakdown for each proposed labor category with each years' tab.

L.3.3.3.1.1 A4, Tabs "Sample TOP Build-up CLIN 1" through "Year 5 Labor Build-up CLIN 1" rows have been filled with columns dictating the type of information required by the Government for evaluation. These are used strictly to illustrate to Offerors what the formulas should look like and shall not be construed as the Government dictating a specific cost element and/or fee amount.

Summation formulas have been included for each column to capture these costs, which will flow into the summary sheets within A4.

L.3.3.3.1.2 The Offeror shall provide a crosswalk of all proposed labor categories to corresponding Government Standard eCRAFT Labor Categories. The Government has included the historical labor categories and corresponding eCRAFT Labor Categories at A4, Tabs "Year 1 Labor Build-up CLIN 1" through "Year 5 Labor Build-up CLIN 1" as a guide for Offeror proposal action. With Offeror input at Columns E and F in GREEN-colored font of the aforementioned Year 1 through Year 5 tabs, the Offeror shall propose (or confirm) Standard eCRAFT Labor Categories based on the descriptions listed at: https://www.navsea.navy.mil/Home/Warfare-Centers/NUWC-Newport

. For labor categories that provide for /Partnerships/Commercial-Contracts/Labor-Categories/ various levels (i.e., I, II, III, IV), the Offeror shall select the level that best matches the proposed individual and Offeror-specific labor category; (Anticipate that exact matches in terms of years of experience, etc., may not occur). For Service Contract Act (SCA) labor categories, the Offeror may propose a SCA labor category listed in the SCA Directory of Occupations at: https://www.dol.

gov/agencies/whd/government-contracts/service-contracts/tools.

L.3.3.3.2 Narrative Section: The Offeror shall complete a Narrative section to substantiate the proposed costs. This section shall clearly provide the basis of estimate, methodology, and assumptions used in developing each cost element (labor hours, labor rates, fringe rates, indirect rates (overhead, G&A, material handling, subcontract handling, etc.), and fee. This section shall also include the requested support documentation to substantiate each cost element. See cost element sections below.

L.3.3.3.2.1 The Narrative Section shall include a section substantiating proposed costs for the Sample TOP, to the same level of detail specified at L.3.3.3.2.

W51EW726RA0040002

https://www.navsea.navy.mil/Home/Warfare-Centers/NUWC-Newport/Partnerships/Commercial-Contracts/Labor-Categories/ https://www.navsea.navy.mil/Home/Warfare-Centers/NUWC-Newport/Partnerships/Commercial-Contracts/Labor-Categories/ https://www.dol.gov/agencies/whd/government-contracts/service-contracts/tools https://www.dol.gov/agencies/whd/government-contracts/service-contracts/tools

L.3.3.4 Certified cost or pricing data is not anticipated for contract award as adequate competition is anticipated. However, the Government reserves the right to request such information should it become necessary, consistent with Federal Acquisition Regulation (FAR) Subpart 15.4, Contract Pricing. Other than certified cost or pricing data is required for the Cost-Plus Fixed Fee (CPFF) Contract Line Item Numbers (CLINs) to perform cost realism as required by FAR 15.404-1(d)(2).

The CPFF CLIN is 0001. For the Not-To-Exceed (NTE) CLINs, which are CLINs 0002-0004, the Government-provided NTE amount will be used. If a material handling rate and/or if G&A will be applied to CLIN 0002, the Offeror shall provide the rate with its proposal A4 "Pricing Matrix" in the material handling and/or G&A Rate section, which can be located in Tab "Total Evaluated Price Summary". The proposed material handling and/or G&A Rate will then become/be calculated as part of the Total Evaluated Probable Cost/Price. This rate will be capped for the life of the Task Order/Contract and no upward adjustments will be allowed based on the actual rate incurred. Fee will not be applicable to the NTE CLINs. The following other than certified cost or pricing data is required for the CPFF CLIN, to include the Sample TOP, as applicable:

L.3.3.4.1 : Attachment 5 (A5) provides historical data of BTSS Program Labor Hours/Staffing staffing from Apr 2021 through Mar 2025. It provides the labor categories employed during that period to satisfy mission requirements and is the basis of the structure for the Pricing Matrix.

Additional staffing can be added in the 'Labor Build-up CLIN 1' tabs in the shaded cells at A4.

Please utilize blue font color for added labor categories to assist the Government in evaluating the submission.

L.3.3.4.1.1 Offerors may utilize historical data at A5 as deemed appropriate, but the Offeror is responsible for proposing personnel, hours and associated labor rates to meet requirements.

L.3.3.4.1.2 A5 is also the basis of the structure for the Pricing Matrix. The Pricing Matrix is designed to differentiate between prime or subcontractor(s) effort and cost. The Offeror's Cost Narrative Section and any supporting worksheets shall also differentiate between prime and subcontractor(s) effort and cost accordingly. The proposed hours shall reflect a realistic assessment of each team member's expected participation/contribution to this effort. The Offeror's proposal shall not blend or combine labor categories. If multiple PWS paragraphs are being performed by cross utilized employees, identify such approach by cross-referencing the cost of such PWS paragraphs.

L.3.3.4.1.3 The Pricing Matrix contains labor categories for skills the government anticipates will be needed to satisfy the requirements of the PWS. These labor categories correspond with those shown in A5. Any pre-populated labor categories not proposed shall remain in the Pricing Matrix as solicited (or amended, if applicable), with no corresponding effort or costs assigned. Additional rows may be inserted in the Pricing Matrix to enter additional labor categories the Offeror deems necessary. The Offeror shall ensure the additional labor categories are added at the bottom of each section of the Pricing Matrix and use a blue font color to easily differentiate the added labor categories. The Offeror must ensure that any formatting and/or formulas are copied to match the formatting and/or formulas of the existing labor category rows included in the Pricing Matrix.

L.3.3.4.1.4 For exempt employees only, the Offeror is to comply with FAR 52.237-10, Identification of Uncompensated Overtime. If uncompensated overtime is proposed, the adjusted hourly rate (i.

e., the rate that results from multiplying the hourly rate for a 40-hour work week by 40, and then dividing by the proposed hours per week, which includes uncompensated overtime hours) shall be applied to all proposed hours (regular and overtime). The Offeror shall ensure the accounting practices used to estimate uncompensated overtime must be consistent with its cost accounting practices used to accumulate and report uncompensated overtimes hours. The Offeror shall include a copy of its policy in addressing uncompensated overtime within its proposal.

L.3.3.4.1.5 Tab "Sample TOP Labor Build-up CLIN 1" of the Pricing Matrix includes the same labor categories as established for the entire PWS. However, Offerors shall add/subcontract categories as necessary based on their technical approach in support of the Sample TO. Deletions or additional rows may be inserted in the Pricing Matrix to enter additional labor categories the Offeror deems necessary. The Offeror shall ensure the additional labor categories are added at the bottom of the applicable Pricing Matrix tab and use a blue font color to easily differentiate the added labor categories. The Offeror must ensure that any formatting and/or formulas are copied to match the formatting and/or formulas of the existing labor category rows included in the Pricing Matrix.

L.3.3.4.2 Base Labor Rates: The cost breakdown shall provide the base labor rates associated with each labor category. Base rates are the hourly rates that the employees will actually be paid for performance under the contract. In the narrative, explain the basis for the proposed labor rates and provide support documentation (Only for Exempt labor categories). Some common basis for proposed rates is the actual rate the employee is currently being paid, Bureau of Labor Statistics, Payscale, etc. In addition, the method used to escalate rates for additional years requires explanation and the inclusion of the basis for the escalation factors used, along with the date that pay increases are effective. Note, this only applies to the Exempt labor categories. Escalation shall not be applied to Service Contract Labor Standards (SCLS) labor rates. All Non-Exempt ordering period labor rates shall be proposed IAW the applicable Wage Determination and/or applicable Executive Order (see Attachment 6). If the applicable Wage Determination (WD) is adjusted after contract award, then the Contractor may be entitled to an adjustment to their contract price post-award. Only the labor categories affected by the applicable WD will be adjusted.

L.3.3.4.3 Fringe Benefits: In the cost breakdown spreadsheet, the Offeror shall provide either the proposed fringe benefit rate or provide the individual elements that comprise the fringe benefits such as Health & Welfare (H&W), Paid Time Off (PTO), Federal and State Mandated Payroll Taxes, Worker's Compensation Insurance, etc. If the Offeror is proposing a fringe benefit rate, the narrative or a separate spreadsheet shall include the base and pool calculation details (not just a summary base and pool amount, the narrative or separate spreadsheet must include the breakdown of the expenses) for the past 3 years and include the current projected year. In addition, provide the number of Full Time Equivalents (by classification: Exempt, SCA, or CBA) that were used to calculate the fringe benefit rate. If the Offeror has DCAA approved final incurred cost rates for each of the past 3 years, provide the DCAA (or otherwise) approval letter of said rates as support documentation. Whether an Offeror is proposing a fringe benefit rate or proposing by individual fringe benefit element, the Offeror is required to provide support documentation for common expenses included in fringe benefits, such as Payroll taxes, PTO, Medical, Dental, Vision and Disability Insurance, Retirement benefits, Worker's Compensation, etc. For example, the support documentation for insurance can be in the form of quotes received from insurance companies that identify the premium paid for Medical, Dental, Life, Disability Insurance, or Worker's Compensation, etc. For medical, dental, vision, life insurance, etc., identify the number of employees covered and the premium selected for each employee (e.g., employee only, employee and spouse, employee and family, etc.). Other support documentation can be in the form of the company's policy for retirement contributions, PTO, bonuses, etc.