W519TC27QA026 DRS M7A1 HDPE PLATFORM CONTRACTOR QUESTIONS AND ANSWERS.pdf
PDF 77 KB Posted
- Attached to
- DRS M7A1 HDPE PLATFORM
- Solicitation number
- W519TC27QA026
About this file
This is a Contractor Questions and Answers document for federal contract solicitation W519TC27QA026 concerning DRS M7A1 HDPE platforms.
The solicitation requires three types of HDPE platform products: part 1110701005P (14 x 14 inches, 43 units), part 1110701017 (30 x 80.38 inches, 44 units), and part 1110701018 (30 x 80.38 inches, 42 units). All platforms must be manufactured from solid black HDPE material, 1 inch thick with UV stabilization for exterior use. The material must be solid black rather than pebbled finish. Accessories such as stairs and handrails are not required. Delivery is required by December 15, 2026, to zip code 61299-5000. The document clarifies that different CLIN line items referencing the same drawing number represent identical products funded through different budgetary areas, and that each CLIN references specific drawing specifications with a new clarifying drawing being provided. Contractors should refer to the referenced drawings for complete specification details regarding dimensions and notes applicable to each line item.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
W519TC27QA026 DRS M7A1 HDPE PLATFORM CONTRACTOR QUESTIONS AND
ANSWERS
Q1. "Do you want these quoted in black HDPE or natural (off white)?
Black has a UV inhibitor in the material for longer life in outdoor applications, white does not. If these are for indoor use then white would be the best choice.
Black typically runs about 10% more in cost of raw material."
A1. Black
Q2. My suppliers is requesting assistance for the following details. Please review and advise.
I saw these attachment. Can you clarify the following:
Length and Width
A2. 1110701005P is 14 x 14 per the print 1110701017 is 30 x 80.38 per the print 1110701018 is 30 x 80.38 per the print
Q3. Deck height and/or clear height
A3. MATERIAL: HDPE, 1", SOLID, UV STABLIZED color Black
Q4. Type of decking
A4. MATERIAL: HDPE, 1", SOLID, UV STABLIZED color Black
Q5. Stairs?
A5. No stairs. I don't understand this question.
Q6. Handrail?
A6. No handrail. I don't understand this question.
Q7. Zip code this will be shipping to A7. The ship to location is mentioned several places within solicitation W519TC27QA026 including the narrative, inspection and acceptance location of each CLIN, and delivery schedule of each CLIN.
Zip code is 61299-5000. Delivery is required by 12/15/2026
Q8. Will this be interior or exterior?
A8. Call it exterior
Q9. Quantity question. Are these quantities correct?
A9. Yes, these quantities are correct.
1110701005P: 43 EA
1110701017: 44 EA
1110701018: 42 EA
Q10. On this solicitation, the material is called out for 1" HDPE. In the past all these parts required a pebbled finish.
There have also been specific material specs on these parts in the past.
Does the same specs apply to these requested parts?
A10. They want solid black, not anything pebbled Pebbled finish per the drawing.
Q11. What is “Note 2 referring to”.
A11. The notes are specified on the drawing.
Q12. For the ACETYLENE TANK PAD 0000119331-005, I see 6 items listed with the title below but different quantities listed. There is only one drawing with one set of dimensions.
What is the difference between the items?
A12. There is no difference between the items. They are listed on different CLINS as the funding comes from different areas.
Q13. For COUNTERTOP 1 1110701017, I see 7 items listed with that drawing number, however, I am not sure which item corresponds with what TAG on the drawing as it lists many different possible dimensions from A1-D6, so I’m not sure what quantities are needed for what.
Similar situation for COUNTERTOP 2 1110701018. 5 Items are listed but I am not sure which item corresponds with what TAG on the drawing as it lists A1-B3, so I’m not sure what quantities are needed for what.
A13. Quantities are addressed in Question and Answer 9 above. Each CLIN references a drawing with specifications that need to be met for each CLIN. In addition, a new drawing is being referenced to clarify further.
File details come from the government source that posted it. Updated .