A02_Attachment 0003_Ball Bearing Certified Test Report.pdf
PDF 98 KB Posted
- Attached to
- BALL BEARINGS
- Solicitation number
- W519TC-26-Q-BALL
About this file
This is a contract requirement document specifying certified material test report standards for government shipments under specification MS19060.
Contractors must provide certified test reports with each shipment to demonstrate compliance with all applicable material specification requirements. The Government retains independent inspection rights regardless of test report availability. Each certified test report must include: the supplier's name and address, purchase order number, complete material identification (specification number, revision, amendment, dates, type, grade, and size), quantity of each material, test results referenced to applicable requirements (specifically Material, Hardness, Surface Roughness, Material Density, and Part Number), quantity tested with sample size and specimen type, and authorization documentation consisting of the date, signature, and title of the contractor's authorized representative attesting to the accuracy of the report content.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| A02_Attachment 0002_CAAA FORM 702-37 Ball Bearings.pdf | ||
| Attachment 0001 - RFI Ball Bearings Questionnaire.docx | DOCX document |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
CERTIFIED MATERIAL TEST REPORT
For those material(s) identified below, a certified test report must be provided to the Government with each shipment. The test results contained on the certified test report(s) shall be adequate to determine compliance with all applicable requirements of the material specification(s) listed below. Availability of the certified test reports are in addition to other contract requirements and does not reduce or prejudice the Government’s right to inspect supplies under the previsions of this contract. The test report(s) shall contain the following:
a. Name and address of suppliers.
b. Purchase order number.
c. Identification of all materials by specification, revision, amendment and dates, together with type, grade, size etc.
d. Quantity of each material.
e. Test results identified by reference to the applicable requirements.
1. Material
2. Hardness
3. Surface Roughness
4. Material Density
5. Part Number
f. Quantity tested, sample size, and specimen type as applicable.
g. Date, signature, and title of the authorized representative of the contractor that is attesting to the accuracy of test report content.
Spec. No.
MS19060
File details come from the government source that posted it. Updated .