1110700598-2 Drawing.pdf

This is a technical drawing specification document for a manufactured component identified as "COUNTERTOP 1" (Drawing Number 1110701017). The document specifies manufacturing requirements for a solid HDPE (high-density polyethylene) part that must be fabricated according to ASME Y14.100-2017 and ASME Y14.5-2009 standards. The material is to be made from HDPE solid stock at 1 inch thickness, with all burrs and sharp edges removed and broken edges sharpened per specification requirements.

The drawing includes detailed dimensional tolerances, with dimensions specified in inches unless otherwise noted. The component features multiple machined holes (designated A1-A4, C1-C12, D1-D6) with specific diameter and placement requirements indicated on the technical drawing. The document references equipment code number 1110750002 and includes revision history tracking design modifications, including initial release and subsequent revisions for removed holes and added tolerances dated between June and September 2025. The drawing carries a distribution statement approving public release with unlimited distribution and is attributed to the U.S. Army Combat Capabilities Development Command Chemical Biological Center.