1110700598-1 Drawing.pdf

These are engineering drawings for two components manufactured by the U.S. Army Combat Capabilities Development Command Chemical Biological Center at Rock Island Arsenal. The first drawing (1107010005) specifies an Acetylene Tank Pad fabricated from HDPE (high-density polyethylene) solid material in 1-inch thickness, black matte finish with marine grade specifications. The pad measures 14.00 inches in length and 8.00 inches in width, featuring four rounded corners with a 3.00-inch radius and four mounting holes with 0.452-0.015 inch diameter and 0.76 by 82-degree specifications. The material must meet ASME Y14.100-2017 and ASME Y14.5-2009 standards, with all burrs and sharp edges removed. Key material properties include density greater than 0.93 g/cm³, tensile strength greater than 4100 PSI, elongation at break greater than 13 percent, flexural modulus greater than 130,000 PSI, shore D hardness of 66 per ASTM D2240, tensile impact greater than 150 ft-lbs/in² per ASTM D1822, and heat deflection temperature greater than 179°F per ASTM D648. The drawing carries revision P3 dated 2025-09-18 approved by JPD, with approval date 2024-06-08.

The second drawing (1107700598) specifies HDPE solid material in 1-inch thickness, UV-stabilized, also in black matte finish with marine grade specifications. This component features variable length and width dimensions with identical material specifications and performance requirements as the first drawing. The material must meet the same ASME standards, density requirements, tensile strength, elongation, flexural modulus, shore D hardness, tensile impact, and heat deflection temperature specifications. The drawing includes four part numbers for various configurations: Acetylene Tank Pad (1107501011 and 1107501017), and Countertop 1 and 2 (1107501018 variants) with specified length and width measurements. The drawing carries revision P1 dated 2024-06-07 with PMS approval.