SOW_Doosan CNC machine repairs.pdf

STATEMENT OF WORK

REPAIR DOOSAN 2600 SY CNC MACHINE

AND SUPPORTING SYSTEMS

DATE: 23 SEP 2024

1. SCOPE:

1.1 This statement of work covers the requirements for the repair and alignment of the Doosan 2600 SY CNC machine at Building 59460, located at Blue Grass Army Depot, Richmond, KY.

2. DESCRIPTION OF WORK

2.1 The contractor shall provide all labor, tools, and management necessary to repair, align, and reassemble the Doosan 2600 CNC machine and return to a full mission ready condition at the Blue Grass Army Depot (building 59460) in Richmond, KY. Contractor will ensure the CNC machine system is fully serviceable and operational following repairs.

3. CODES AND REGULATIONS

3.1 All systems and equipment shall be repaired in accordance with the latest version of the following:

• National Electric Code (NEC), NFPA 70

• Occupational Safety Health Administration (OSHA)

4. GENERAL REQUIREMENTS

4.1 Vendor shall provide all tools and equipment to perform the work. This shall include all specialized equipment, rental lifts to include rental fees and delivery, and any other tools or equipment related to performing repair, programming, or maintenance activities.

4.2 All repairs completed must be coordinated through Contracting and are subject to approval by Contracting, the CoMM Maintenance and Demil Engineering staff, and subject matter experts.

4.3 Contractor shall immediately notify Contracting and above noted points of contact of any off-normal operation including any condition that hampers normal operation or safety of this equipment.

4.4 Contractor shall cleanup the jobsite daily. All hazardous waste (e.g., batteries, bulbs, circuit boards, and detectors) shall be properly disposed and as called for under the Waste Management Plan below.

4.5 System and Equipment Safety Tagging/Lockout requirements as provided by OSHA and

NEC are to be followed during performance of this SOW.

5. REPAIRS TO BE COMPLETED

5.1 Make all necessary repairs, alignments, and assembly to bring the Doosan 2600 SY CNC machine to full mission capable status. Contractor will provide all labor, tools, specialized equipment to perform alignments.

Contractor will remove entire saddle and slide from Z-axis ways and up, ensuring that assembly is properly aligned, scraped, and in full functioning order. Reassemble machine to include all sub-components and align machine and ensure that all components are properly working and aligned.

5.2 Repairs shall include but not be limited to the following elements:

5.2.1 Disassemble Z-axis straddle and slide from machine and scrape, align, and verify assembly is in tolerance and fully functional.

5.2.2 Reinstall Z-axis straddle and slide, scrape Turcite pads and align assembly to machine frame.

5.2.3 Assemble machine to fully operational status, including sub assemblies.

5.2.4 Align all axis’ within machine to original factory parameters.

5.2.5 Test machine to ensure all parameters are properly aligned and operational.

5.3 Vendor shall be responsible for travelling to the government facility, Blue Grass Army

Depot, Richmond, Kentucky and shall supply all tools, parts, equipment, man-lifts as required to complete the project.

6. QUALITY ASSURANCE

6.1 Contractor will verify with CoMM Maintenance and Demil Engineering staff, and subject matter experts that machine is fully operational.

7. SCHEDULING WORK HOURS

7.1 The contractor shall coordinate with designated Mission personnel for schedule and building access within 10 calendar days after the Notice to Proceed. Unless prior arrangements are made, work shall be performed from 6:30 AM to 5:00 PM Monday through Thursday. Building will not remain in use during the period of work.

8. SAFETY/SECURITY/ENVIRNMENTAL REQUIREMENTS

8.1 Project location is within the Blue Grass Army Depot Restricted Area. All BGAD Security

Requirements, including antiterrorism requirements, will be in effect for this project.

Vendor personnel shall be capable of meeting security requirements. Reference the contract clauses for more specific information regarding Security, OSHA, and BGAD Safety Requirements.

8.2 Environmental Protection: The Government reserves the right to review all deliverables for compliance with established environmental requirements.

8.3 Applicable Documents:

8.3.1 DA Pamphlet 385-64.

8.3.2 BGAD Regulation 385-1, the Blue Grass Army Depot Safety Program.

8.3.2 AR 750-1 Army Materiel Maintenance Policy

9. PERFORMANCE TIME

9.1 Complete all work within 30 days from Notice to Proceed (NTP). The contractor shall perform this work at Building 59460, Blue Grass Army Depot, 431 Battlefield Memorial Highway, Richmond, KY. 40475.

10. ATTACHMENTS

10.1 BGAD Site Safety and Security Requirements.

END OF STATEMENT OF WORK