G_230900-2 Rev 1.pdf

OMB NO. 9000-0062

NEW

ITEM

NO.

DATE

DATE

RECOMMAND APPROVAL

DATE

REQUEST RESUBMITTAL ON DISAPPROVED ITEMS WITHIN _______________ DAYS OF DATE SHOWN BELOW.

DATE

AF FORM 3000, 19910901 (EF-V2) PREVIOUS EDITION IS OBSOLETE

Public reporting burden for this collection of information is estimated to average 20 minutes per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden to the Department of Defense, Washington Headquarters. Services. Directorate for information Operations and Reports. 1215 Jefferson Davis Highway, Suite 1204, Arlinton VA 22202-4302, and to the Office of Management and Budget, Paperwork Reduction Project OMB No 9000-0062, Washington DC 20503. Please DO NOT RETURN your form either of these addresses. Send your completed form to: SAF/AQCO, Pentagon, Washington DC 20330-1000.

FORM APPROVED

Expires Apr.30 1993

MATERIAL APPROVAL SUBMITTAL

(See Instructions on Reverse)

TO: ( Contracting Officer)

SUBMITTAL

DATEFROM: (Contactor)

CONTRACT NUMBER SUBMISSION NUMBER

PREVIOUS SUBMITTAL NUMBER

TO BE COMPLETED BY CONTRACTOR

PARA NO./DRAWING NO. (Include Type, Model Number, Catalog, Mfg.,etc.)

DESCRIPTION OF MATERIAL

PROJECT NUMBER

FOR GOVERNMENT USE ONLY

APPROVED DISAP-

PROVED

SEE

REVERSE INITIALSPECIFICATION SECTION /

TYPE OR PRINT NAME AND TITLE SIGNATURE

TO: (AF Contracting Office)

BY COMPANLETING THIS FORM, THE UNDERSIGNED CONTRACTOR CERTIFIES THAT

THE MATERIAL COMPLIES WITH ALL SPEICIFICATIONS OF SUBJECT CONTRACT.

For Evaluation and Action

TYPE OR PRINT NAME AND GRADE SIGNATURE

FOR GOVERNMENT USE ONLY

TO: (Base Civil Engineering Officer)

DISAPPROVAL AS INDICATED ABOVE AND SUBJECT TO ANY APPLICABLE COMMENTS ON THE REVERSE

TO: (CONTRACTOR)

TYPE OR PRINT NAME AND GRADE SIGNATURE

SIGNATURE

DISAPPROVED AS INDICATED ABOVE AND SUBJECT TO ANY APPLICABLE COMMENTS ON THE REVERSE SIDE.

TYPE OR PRINT NAME AND GRADE

APPROVED

RESUBMITTAL

AF FORM 3000, 199109011 (EF-V2) (REVERSE)

1. The term "material " is defined as articles, supplies, raw materials, equipment, parts, components, and end items that are to be incorporated into the work required by the contract.

2. Tlhis form is to be used by contractors for submitting Shop Drawing, Equipment Data, Manufacturer's Literature and Certificates and samples of Materials to the Government for approval in accordance with the provisions of this contract. Unless otherwise specified, it is to prepared in 4 copies,signed, and provide to the contracting officer with appropriate attachments.

INSTRUCTIONS TO CONTRACTORS

3. Item(s) to be approved will be clearly tabbed or identified. Data pertainin to item(s) to be approved will be clearly identified or tabbed, particularly where documents are voluminous, in order to properly evaluate the materials or articles to be incorporated in the work. Each attachment will be numbered to correspond with the item number shown on the face of this form.

4. Request submittal shal be numbered consecutively, by contract. In the space entitled "Submission No". This number, in addition to the contract No., will be used to identify each Material Approval Submittal. Resubmissions will be indicated in the appropriate block and the insertion of previous submission number and data in addition to a new submission number. A Single submission should be used for all work of a section of the specifications, but in NO instace should the submission include work for more than one (1) contract. Submittals requiring priority handliing will be submitted by seprate submittal using the form and so marked across the face of the form.

5. This Material Approval Submittal is not valid unless it is signed by the contracting officer. This approval is required as called for by the contracting officer under the terms of this contract.

COMMENTS

(Number to correspond with applicable Item Number on reverse)

Product Specification

Toll Free: 888.492.8363 I www.wavenetcable.com ©1991-2025 Wavenet, Incorporated. All rights reserved.

CAT 6 600MHz UTP PLENUM (CMP) 23/4 UNSHIELDED FT6 Cable

Cable Detail

Applicable Standards

• C(ETL) listed FT6 CMP

• C(ETL)US Verified to TIA-568-C.2

• RoHS Compliant

Physical Characteristics Conductor Material Solid Bare Copper

Number of Conductors 4

AWG 23 AWG

Stranding Solid Insulation Material FEP Overall Diameter 0.038 in. ± 0.0002 in

Average Thickness 0.0078 in Jacket Material Flame Retardant PVC

Average Wall Thickness 0.020 in.

Nominal Outer Diameter 0.236 in. ± 0.008 in.

Nominal Weight 31 lbs.

Shielding (Y/N) No Ripcord (Y/N) Yes

Separator (Y/N) Yes

Mechanical Characteristics

Temperature Range Installation 0°C to + 75°C Operating -20°C to + 75°C

Tensile Strength Before >= 13.8 Mpa Elongation Aging >= 100%

Aging Condition 100°C x 168 hours

After >= 85% of unaged Aging >= 50% of unaged

Insulation Colors Pair 1 White / Blue Blue Pair 2 White / Orange Orange Pair 3 White / Green Green Pair 4 White / Brown Brown

Part Numbers Jacket Color Package

6E04UPXX3N Blue, Grey, Red, Purple, White 1000FT / RIB

6E04UPXX4N Black, Blue, Green, Grey, Red, Orange, Purple, White, Yellow 1000FT / Reelex II

Electrical Characteristics DC Resistance 9.38 Ω / 100m Max. @ 20°C

Resistance Unbalanced 5% Max. @ 20°C Capacitance Unbalance 330 pF / 100m Max. @ 20°C

Mutual Capacitance 5.6 nF / 100m Max. @ 20°C Delay Skew 45 nS / 100m Max. @ 20°C

Nominal Velocity of Propagation (NVP) 70%

Electrical Performance Frequency

(MHz) Attenuation

(dB/100m) Max.

Return loss (dB) Min.

NEXT

(dB) Min.

PS-NEXT

(dB) Min.

1 2.0 20.0 77.3 75.3 4 3.8 23.6 68.3 66.3 8 5.3 25.4 63.8 61.8

10 5.9 26.0 62.3 30.3 16 7.4 26.0 59.3 57.3 20 8.3 26.0 57.8 55.8 25 9.3 25.5 56.3 54.3

31.25 10.4 25.0 54.9 52.9

62.5 14.9 23.5 50.4 48.4 100 19.0 22.5 47.3 45.3 155 23.9 21.6 45.8 43.5 200 27.4 21.0 42.8 40.8 250 30.8 20.5 41.3 39.3 300 34.0 20.1 40.2 38.2 350 37.0 19.8 39.2 37.2 400 39.7 19.5 38.3 36.3 450 42.1 19.2 37.5 35.5 500 44.9 19.0 36.8 34.8 550 47.3 18.8 36.2 34.2

Frequency (MHz)

ELFEXT

(dB/100m) Min.

PS-ELFEXT

(dB) Min.

ACR

(dB) Min.

PS-ACR

(dB) Min.

1 70.8 67.8 75.0 73.0 4 58.7 55.7 64.0 62.0 8 52.7 49.7 57.7 55.7

10 50.8 47.8 55.6 53.6 16 46.7 43.7 50.7 48.7 20 44.7 41.7 48.2 16.2 25 42.8 39.8 45.6 13.6

31.25 40.9 37.9 42.8 40.8

62.5 34.8 31.8 32.9 30.9 100 30.8 27.8 24.9 22.9 155 27.0 23.6 21.0 21.5 200 24.7 21.7 18.4 16.4 250 22.8 19.8 13.5 11.5 300 21.2 18.2 9.6 5.0 350 19.9 16.9 5.2 3.2 400 18.7 15.7 1.5 - 450 17.7 14.7 - - 500 16.8 13.8 - - 550 15.9 12.9 - -

* Values above 250MHz are information only.

Cable Marking

XXXXXX CATEGORY 6 600MHZ 23AWG 4PR UTP CMP 75C FT6 C(ETL)US

VERIFIED (ETL) ANSI/TIA-568-C.2 ****FT

http://www.wavenetcable.comt/

800.962.9473 www.encorewire.com

ENGINEERING SPECIFICATIONS

Standards Underwriters Laboratories Standards; UL-62, UL-66, UL-758, UL-1063, UL-2556; AWM SPEC 1316;

Canadian Standard Association C22.2 No. 127; NFPA 70 (NEC®); ARRA 2009 Section 1605 "Buy American" Compliant;

MasterSpec Division 26 Sections 260519, 260523; Canadian Recognized UL-Listing #E-156877 and UL-Listing #E-156878

CONSTRUCTION

Conductors Solid, uncoated copper conductors per ASTM-B3; Stranded, uncoated copper conductors per ASTM-B174

Insulation Color-coded Polyvinyl Chloride (PVC), heat and moisture-resistant, flame retardant compound, and flexible cord and fixture

Jacket A tough, polyamide, Nylon outer covering

APPLICATIONS

Type TFFN (stranded) or TFN (solid) conductors are primarily used as fixture wire as defined by the National Electrical Code (NEC) at temperatures not to exceed 90°C in dry locations. For applications requiring Type MTW, the conductor is permitted for use in dry locations at 90°C or not to exceed 60°C in wet locations or where exposed to oils or coolants. For applications requiring Type AWM, conductor is appropriate for use at temperatures not exceeding 105°C in dry locations. All conductors are permitted for new construction or rewiring for 600-volt applications.

FEATURES

All sizes are rated gasoline and oil-resistant II.

➊ Nylon Jacket

➋ PVC Insulation

➌ Stranded or Solid Copper Conductor

➊

➌

TYPE TFFN / TFN / TEWN COPPER CONDUCTOR - 600V

TFFN Copper Conductor

Size (AWG) and Number of Conductors

No. of Strands

PVC Insulation Thickness

(Conductor) Nylon Jacket

Thickness Outside Diameter Approximate Net Weight Allowable Ampacity (Amps)1

Standard Packaging (ft)(mm) (in) (mm) (in) (mm) (in) (kg/km) (lbs/1000ft)

18 16 0.380 0.015 0.100 0.004 2.24 0.088 12 8 6 2000' Carton (4x500), 2500' Reels 16 26 0.406 0.016 0.127 0.005 2.67 0.105 18 12 8 2000' Carton (4x500), 2500' Reels

TFN Copper Conductor

Size (AWG) and Number of Conductors

No. of Strands

PVC Insulation Thickness

(Conductor) Nylon Jacket

Thickness Outside Diameter Approximate Net Weight Allowable Ampacity (Amps)1

Standard Packaging (ft)(mm) (in) (mm) (in) (mm) (in) (kg/km) (lbs/1000ft)

18 Solid 0.380 0.015 0.100 0.004 1.99 0.0783 12 8 6 2000' Carton (4x500), 2500' Reels 16 Solid 0.380 0.015 0.100 0.004 2.26 0.0888 16 11 8 2000' Carton (4x500), 2500' Reels

1 Allowable ampacity shown above is per the National Electrical Code, Table 402.5. The above data is approximate and subject to normal manufacturing tolerances.

The above data is approximate and subject to normal manufacturing tolerances.

PRINT LEGEND:

CONDUCTOR SIZES 18 AWG THROUGH 16 AWG SOLID: ENCORE WIRE CORPORATION (SIZE) AWG TYPE TFN OR AWM GRII 600 VOLTS (UL) CONDUCTOR SIZES 18 AWG THROUGH 16 AWG STRANDED: ENCORE WIRE CORPORATION (SIZE) AWG TYPE MTW OR TFFN OR AWM GRII 600 VOLTS (UL) OR AWM OR C(RU) TYPE TEWN FT1

➋

CABLE TYPE 2C – 16 AWG

Product Data Sheet

P/N W161P-2062RIB MADE IN USA

2COND 16AWG STRANDED UNSHIELDED PLENUM

NATURAL JACKET

UL TYPE CL3P/CMP/FT-6

CONSTRUCTION

CONDUCTOR: #16 AWG 19 STRAND BARE COPPER

INSULATION: 0.007” PLENUM RATED PVC

CABLE: 2 CONDUCTORS TWISTED WITH2.50 LHL (4.8 TWISTS/FOOT)

COLOR CODE: BLACK, WHITE

JACKET: 0.015” PLENUM RATED PVC

NATURAL OVERALL O.D.: .170" nom.

PRINT LEGEND: 16 AWG 2C (UL) CMP C(UL) US OR (UL) CL3P OR (UL) FPLP 75C

FT-6 “ROHS II” REACH MADE IN USA (SEQUENTIAL FOOTAGE)

STANDARDS

UL LISTED AS TYPE CL3P PER UL STANDARD 13

UL LISTED AS TYPE CMP C(UL) US PER UL STANDARD 444

UL LISTED AT TYPE FPLP PER UL STANDARD 1424

CABLE SUITABLE FOR INSTALLATION UNDER NEC (NFPA) ARTICLES, 800, 725 AND 760 GUIDELINES Warning: This product may contain chemicals, such as Vinyl Chloride, known to the State of California to cause cancer.

Wash hands after handling.

ELECTRICAL PROPERTIES

MUTUAL CAPACITANCE 36.1 pF/ft nom. @ 1 KHz

IMPEDANCE: 52.5 OHMS +/- 10%

DC RESISTANCE: 4.3 OHMS /MFT @20C

MAXIMUM CURRENT: 7 AMP @20 C

THIS DRAWING AND/OR SPECIFICATION IS THE PROPERTY OF CONNECT-AIR INTERNATIONAL. IT IS ISSUED IN STRICT CONFIDENCE , AND SHALL NOT BE REPRODUCED , COPIED , DISCLOSED TO OTHERS , OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS WITHOUT THE PERMISSION OF THE OWNER.

3500 W VALLEY HWY N, STE B105

AUBURN, WA 98001

(800) 247-1978 www.connect-air.com

Updated 9/18/20 KZ http://www.connect-air.com/

Updated 6/12/17 bs

P/N W181P-2051 MADE IN USA

2COND 18AWG STRANDED UNSHIELDED PLENUM NATURAL JACKET

UL TYPE CL3P/CMP/CUL

CONSTRUCTION

CONDUCTOR #18 AWG STRANDED BARE COPPER

INSULATION: PLENUM RATED PVC (SGPVC)

CABLE: 2 CONDUCTORS CABLED WITH 2.00” LHL (6 TWISTS/FT) .

COLOR CODE: BLACK, WHITE

JACKET: PLENUM RATED PVC (SGPVC)

NATURAL OVERALL O.D.: .160" nom.

PRINT LEGEND: (UL FILE NO) 18AWG 2C (UL) CMP C(UL)US OR (UL) CL3P OR

(UL) FPLP 75’C FT-6 “ROHS II” REACH

(SEQUENTIAL FOOTAGE MARKERS)

INDUSTRY APPROVALS

UL LISTED AS TYPE CL3P PER UL STANDARD 13

UL LISTED AS TYPE CMP C(UL)US 75C FT-6 PER UL STANDARD 444

UL LISTED AS TUPE FPLP PER UL STANDARD 1424

CABLE SUITABLE FOR INSTALLATION UNDER NFPA 70 AND 90A GUIDELINES

MAXIMUM OPERATING VOLTAGE: 300V RMS

MUTUAL CAPACITANCE: 35 pF/ft @ 1 KHz nom.

VOLTAGE RATING, MAX: 300 VOLTS

THIS DRAWING AND/OR SPECIFICATION IS THE PROPERTY OF CONNECT-AIR INTERNATIONAL. IT IS ISSUED IN STRICT CONFIDENCE , AND SHALL NOT BE REPRODUCED , COPIED , OR DISCLOSED TO OTHERS , OR USED AS THE BASIS FOR THE MANUFACTURE OF SALE OF APPARATUS WITHOUT THE PERMISSION OF THE OWNER.

18404 CASCADE AVENUE S

SUITE 120

TUKWILA, WA 98188

Updated 6/12/17 bs

P/N W184C-2099

4COND 18AWG STRANDED UNSHIELDED FLEX PLENUM

UL TYPE CL3P / CMP

CONSTRUCTION

CONDUCTOR: #18 AWG STR BC

INSULATION: FLEXGUARD

CABLE: 4 CONDUCTORS

COLOR CODE: WHITE, BLACK, RED, GREEN

JACKET: FLEXGUARD

WHITE OVERALL O.D.: .183” nom.

PRINT LEGEND: (UL FILE #) UL TYPE CL3P/CMP

(UL) (SEQUENTIAL FOOTAGE)

INDUSTRY APPROVALS

NATIONAL ELECTRICAL CODE ARTICLE 725 TYPE CL3P (UL: 75C, 150VRMS)

NATIONAL ELECTRICAL CODE ARTICLE 800 TYPE CMP (UL: 75C, 300VRMS)

TEMPERATURE/WORKING VOLTAGE: 60C / 300V

MUTUAL CAPACITANCE 35 pF/ft nom. @ 1 KHz

THIS DRAWING AND/OR SPECIFICATION IS THE PROPERTY OF CONNECT-AIR INTERNATIONAL. IT IS ISSUED IN STRICT CONFIDENCE , AND SHALL NOT BE REPRODUCED

, COPIED , OR DISCLOSED TO OTHERS , OR USED AS THE BASIS FOR THE MANUFACTURE OF SALE OF APPARATUS WITHOUT THE PERMISSION OF THE OWNER.

REV NO. DATE CHANGE

1 3/18/98 CREATE PRODUCT DATA SHEET

18404 CASCADE AVENUE S

SUITE 120

TUKWILA, WA 98188

P/N W241P-2010PRB MADE IN USA

2COND 24AWG STRANDED SHIELDED LOW CAP PLENUM ATS BACNET MSTP

PURPLE JACKET

UL TYPE CL3P / FPLP / CMP

CONSTRUCTION

CONDUCTOR: #24 AWG 7 STRAND TINNED COPPER

INSULATION FOAMED FEP

PAIR: 2 CONDUCTORS TWISTED INTO PAIR WITH 1.75” LHL (6.86 TW/FT)

COLOR CODE: BLACK, WHITE

SHIELD: ALUMINUM/POLYESTER TAPE (FOIL OUT)

& 24 AWG 7 STRAND TINNED COPPER DRAIN WIRE.

JACKET: PLENUM RATED PVC

PURPLE OVERALL OD : .138” Nom

PRINT LEGEND: BACNET MSTP UL FILE #) 24AWG 2C SHIELDED 75C (UL) CL3P OR FPLP

OR C (UL)US CMP FT6 “ROHS COMPLIANT” MADE IN USA (sequential footage)

STANDARDS

CABLE SUITABLE FOR INSTALLATION UNDER NEC (NFPA 70) ARTICLES 800, 725 AND 760 GUIDELINES

CABLE SUITABLE FOR INSTALLATION IN CANADA UNDER SECTION 60 OF CEC, PART I

C(UL)US LISTED AS CMP PER UL STANDARD 444 AND PER CSA C22.2 NO 214-17

UL LISTED AS CL3P PER UL STANDARD 13 OR FPLP PER UL STANDARD 1424

CABLE MEETS NPFA 262 (STEINER TUNNEL) FLAME TEST

WARNING: This product may contain chemicals, such as Vinyl Chloride, known to the state of California to cause cancer.

For more information, go to www.P65Warnings.ca.gov. Wash hands after handling

ELECTRICALS

CAPACITANCE, MUTUAL: 12.5 pF/ft +/- 10% IMPEDANCE: 100 Ohms +/- 10% D.C. RESISTANCE: 24.5 Ohms/Mft at 20C

TEMPERATURE/WORKING VOLTAGE: 75C / 300 VRMS

THIS DRAWING AND/OR SPECIFICATION IS THE PROPERTY OF CONNECT-AIR INTERNATIONAL. IT IS ISSUED IN STRICT CONFIDENCE , AND SHALL NOT BE REPRODUCED

, COPIED , DISCLOSED TO OTHERS , OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS WITHOUT THE PERMISSION OF THE OWNER.

3500 W VALLEY HWY N, B105

AUBURN, WA 98001

Updated 9/18/20 KZ http://www.p65warnings.ca.gov/ http://www.connect-air.com/

227 163rd Street South Spanaway, WA 98387