Attachment 1 PWS Revised 16 July 2026.pdf

PERFORMANCE WORK STATEMENT (PWS)

FOR

Bioremediation and Cleaning of Building 801 Services

1.0 General:

1.1 Scope: The contractor shall provide all personnel, equipment, tools, materials, supervision, and quality control necessary, except as specified in Paragraph 3.0 as Government Furnished, to perform Bioremediation Services, as defined in this PWS.

1.1.1 Objectives: Provide a clean, safe, and fully usable facility for occupancy.

1.2 Background: Evidence of rodent infestation was established in Building 801. Rodent fecal matter and urine was found throughout the facility, to include the kitchenette, food storage areas, and workstations.

1.3 Period of Performance (PoP): The Period of Performance shall be 30 days.

1.4 General Information:

1.4.1 Place and Performance of Services: The contractor shall provide services between the hours of 0730-1630 on Monday through Friday, except on recognized US holidays or when the Government facility/installation is closed due to local or national emergencies, administrative closings, or similar Government-directed facility/installation closings. Performance shall be at 2401 North Airport Road, Building 801, Mansfield, Ohio. The contractor shall at all times maintain an adequate work force for the uninterrupted performance of all tasks defined within this PWS when the Government facility/installation is not closed for the above reasons. When hiring personnel, the contractor shall keep in mind that the stability and continuity of the work force are essential. Teleworking is authorized.

1.4.1.1 Telework: The Government will permit the contractor to telework in support of this requirement. In furtherance of Continuity of Operations Planning (COOP), a telework program may be enacted to ensure that the Government's mission-critical operations stay operational during times of national emergency or incidents of national significance. Telework shall be at no additional cost to the Government.

1.4.1.2 Unscheduled gate closures by the Security Police may occur at any time causing all personnel entering or exiting a closed installation to experience a delay. This cannot be predicted or prevented. Contractors are not compensated for unexpected closures or delays. Vehicles operated by contractor personnel are subject to search pursuant to applicable regulations. Any moving violation of any applicable motor vehicle regulation may result in the termination of the contractor employee’s installation driving privileges.

1.4.1.3 The contractor’s employees shall become familiar with and obey the regulations of the installation; including fire, traffic, safety and security regulations while on the installation. Contractor employees should only enter restricted areas when required to do so and only upon prior approval. All contractor employees shall carry proper identification with them at all times and shall be subject to such checks as may be deemed necessary. The contractor shall ensure compliance with all regulations and orders of the installation, which may affect performance. The Government reserves the right to direct the removal of an employee from Government property or revoke access to Government systems for misconduct, security reasons, or any overt evidence of communicable disease. Removal of contractor employees for reasons stated above does not relieve the Contractor from responsibility for total performance of this contract.

Solicitation W50S8R26Q0028 Attachment 1 Performance Work Statement

Dated 16 July 2026

1.4.2 Recognized Holidays: The following are recognized United States (US) holidays. The contractor shall not perform services on these days:

1.4.2.1 New Year’s Day: January 1st

1.4.2.2 Martin Luther King, Jr.’s Birthday

1.4.2.3 President’s Day

1.4.2.4 Memorial Day

1.4.2.5 Juneteenth National Independence Day: June 19th

1.4.2.6 Independence Day: July 4th

1.4.2.7 Labor Day

1.4.2.8 Columbus Day

1.4.2.9 Veteran’s Day: November 11th

1.4.2.10 Thanksgiving Day

1.4.2.11 Christmas Day: December 25th

a

1.4.3 Reserved

1.4.4 Quality Assurance (QA): The Government will evaluate the contractor’s performance under this contract in accordance with the Quality Assurance Surveillance Plan (QASP). This plan is primarily focused on what the Government will do to ensure that the contractor has performed in accordance with the performance standards. It defines how the performance standards will be applied, the frequency of surveillance, and acceptable quality level(s) or defect rate(s).

1.4.5 Access and General Protection/Security Policy and Procedures. The contractor shall comply with all applicable installation/facility access and local security policies and procedures, which may be obtained from the Contracting Officer’s Representative (COR). The contractor shall also provide all information required for background checks to meet installation access requirements to be accomplished by the local installation’s Security Forces, Director of Emergency Services or local Security Office. The contractor shall ensure compliance with all personal identity verification requirements as directed by DoD, Headquarters Air Force (HAF) and/or local policy. Should the Force Protection Condition (FPCON) change, the Government may require changes in contractor security matters or processes.

1. The contractor shall obtain base identification and vehicle passes, if required, for all contractor personnel who make frequent visits to or perform work on the Air Force installation(s) cited in the contract. Contractor personnel are required to wear or prominently display installation identification badges or contractor-furnished, contractor identification badges while visiting or performing work on the installation.

2. The contractor shall submit a written request on company letterhead to the contracting officer listing the following: contract number, location of work site, start and stop dates, and names of employees and subcontractor employees needing access to the base. The letter will also specify the individual(s) authorized to sign for a request for base identification credentials or vehicle passes. The contracting officer will endorse the request and forward it to the issuing base pass and registration office or Security Forces for processing. When reporting to the registration office, the authorized contractor individual(s) should provide a valid driver s license, current vehicle registration, valid vehicle insurance certificate, and [insert any additional requirements to comply with local security procedures] to obtain a vehicle pass.

3. During performance of the contract, the contractor shall be responsible for obtaining required identification for newly assigned personnel and for prompt return of credentials and vehicle passes for any employee who no longer requires access to the work site.

Solicitation W50S8R26Q0028

4. When work under this contract requires unescorted entry to controlled or restricted areas, the contractor shall comply with AFI 31-101, Integrated Defense, and DODMAN5200.02_AFMAN 16-1405, Air Force Personnel Security Program.

5. Upon completion or termination of the contract or expiration of the identification passes, the prime contractor shall ensure that all base identification passes issued to employees and subcontractor employees are returned to the issuing office.

6. Failure to comply with these requirements may result in withholding of final payment.

1.4.5.1. Reserved

1.4.5.2 For Contractors that do not require CAC, but require access to a DoD Facility and/or Installation. Contractor and all associated sub-contractors employees shall comply with adjudication standards and procedures using the National Crime Information Center Interstate Identification Index (NCIC-III) and Terrorist Screening Database (TSDB) (Air Force Instruction (AFI) 10-245, AFI 31-101 and Air Force Manual (AFMAN) 31-113), applicable installation, facility and area commander installation/facility access and local security policies and procedures (provided by Government representative)

1.4.5.3 Antiterrorism Awareness Level I Training (AT Level I). All contractor employees, to include subcontractor employees, requiring access to US Government installations, facilities and controlled access areas shall complete AT Level I training within 15 calendar days after contract start date or effective date of incorporation of this requirement into the contract, whichever is applicable. AT Level I may be accomplished by a Level I qualified instructor;

completing the Force Protection computer-based training (CBT) course on the Advanced Distributed Learning System (ADLS) or Joint Knowledge Online at http://jko.jten.mil. Tracking for each contractor or subcontractor employee is the responsibility of the COR or unit AT Representative. The contractor shall submit certificates of completion for each affected contractor and subcontractor employee to the COR within 15 calendar days after completion of training by each employee or subcontractor personnel.

1.4.5.4 Reserved. .)

1.4.5.5 Communications Security/Information Technology (COMSEC/IT) Security. All communications with DoD organizations are subject to COMSEC review. All telephone communications networks are continually subject to intercept by unfriendly intelligence organizations. DoD has authorized the military departments to conduct COMSEC monitoring and recording of telephone calls originating from, or terminating at, DoD organizations.

Therefore, the contractor is advised that any time contractor personnel place or receive a call they are subject to COMSEC procedures. The contractor shall ensure wide and frequent dissemination of the above information to all employees dealing with DoD information. The contractor shall abide by all Government regulations concerning the authorized use of the Government's computer network, including the restriction against using the network to recruit Government personnel or advertise job openings.

1.4.5.6 Reserved

1.4.5.7 Reserved

1.4.5.8 Reserved

1.4.5.9 Reserved.

Dated 16 July 2026 http://static.e-publishing.af.mil/production/1/af_a4/publication/afi31-101/generic_wms.pdf https://static.e-publishing.af.mil/production/1/saf_aa/publication/dodman5200.02_afman16-1405/dodm5200.02_afman16-1405.pdf http://jko.jten.mil/

1.4.5.10 Reserved

1.4.5.11 Reserved

1.4.5.12 Reserved

1.4.5.13 Reserved

1.4.5.14 Reserved

1.4.6 Physical Security. The contractor shall safeguard all Government property provided for contractor use. At the close of each work period, Government facilities, equipment and materials shall be secured.

1.4.6.1 Key Control. NOTE: All references to keys include key cards. The contractor shall establish and implement methods of ensuring that no keys/key cards issued by the Government are lost or misplaced or are used by unauthorized persons. No keys issued by the Government shall be duplicated. Such procedures shall include turn-in of any issued keys by personnel who no longer require access to locked areas.

1.4.6.1.1 The contractor shall immediately report any occurrences of lost or duplicated keys/key cards to the COR.

1.4.6.1.2 In the event keys, other than master keys, are lost or duplicated, the contractor shall, upon direction by the KO, re-key or replace the affected lock or locks; however, the Government, at its option, may replace the affected lock or locks or perform re-keying. When the Government replaces or re-keys the locks, the Government will deduct the total cost of lock replacement or re-keying from the monthly payment due the contractor. In the event a master key is lost or duplicated, the Government will replace all locks and keys for that system, and will deduct the total cost from the monthly payment due the contractor.

1.4.6.1.3 The contactor shall prohibit the use of the Government issued keys/key cards by any persons other than the contractor’s employees. The contractor shall prohibit the opening of locked areas by contractor employees to permit entrance of persons other than contactor employees engaged in the performance of services in those areas, or personnel authorized entrance by the KO.

1.4.6.2 Lock Combinations: The contractor shall establish and implement methods of ensuring that no lock combinations are revealed to unauthorized persons. The contractor shall ensure that lock combinations are changed when personnel having access to the combinations no longer have a need to know such combinations.

1.4.7 Special Qualifications: (Add only if applicable. Insert any special certification or license requirements for contractor employees, as appropriate. Do not include education or qualification requirements in this section (include those in PWS part 5). Language in this section should be tailored to fit the requirement.) The contractor shall ensure all employees possess all required licenses for operating ___________ used in the performance of this contract. This does not include education or other qualifications for the position in which the contractor employee is performing, dress codes, or other information. (NOTE: The Government does not provide training to contractors. Contractors must ensure that any personnel performing under a contract are fully trained, licensed, certified, and otherwise qualified to provide services.)

1.4.8 Post Award Conference/Periodic Progress Meetings: The contractor agrees to attend any post award conference convened by the KO in accordance with FAR 42.5. The KO, COR and other Government personnel, as appropriate, may meet periodically with the contractor to review the contactor’s performance. At these meetings, the KO will apprise the contractor of how the Government views the contractor’s performance and the contractor shall apprise

Solicitation W50S8R26Q0028 the Government of problems, if any, being experienced. The contractor shall resolve outstanding issues raised by the Government. Contractor attendance at these meetings shall be at no additional cost to the Government.

1.4.9 Contract Manager (CM): The contactor shall designate a CM who shall ensure performance under this contract. The name of this person, and an alternate who shall act for the contractor when the CM is absent, shall be designated in writing to the KO. The CM or alternate shall have full authority to act for the contractor on all contract matters relating to daily operation of this contract. The CM shall work through the COR, to resolve issues, receive technical instructions, and ensure adequate performance of services. The CM shall ensure that contractor employees do not perform any services outside the scope of the contract without an official modification issued by the KO. The CM shall ensure contractor employees understand that services performed outside the scope of the contract are performed wholly at the expense of the contractor.

1.4.10 Identification of Contractor Employees: All contractor personnel attending meetings, answering Government telephones and working in other situations where their contractor status is not obvious to third parties are required to identify themselves as such to avoid creating an impression that they are Government employees. The contractor shall ensure that all documents or reports produced by contractor personnel are suitably marked as contractor products or that contractor participation is appropriately disclosed. The contractor’s status as a “contractor” shall be predominantly displayed in all correspondence types (to include signature blocks on e-mail) and dealings with Government or non-Government entities. Contractor personnel shall wear identification badges distinguishing themselves as such. The badges shall have the company name, employee name and the word “contractor” displayed.

1.4.10.1 The contractor shall retrieve all identification media (including vehicle passes) from its employees who depart employment for any reason. The contractor shall return all identification media (i.e., badges and vehicles passes) to the KO within 14 days of an employee’s departure.

1.4.11. Combating Trafficking in Persons: The United States Government has adopted a zero tolerance policy regarding trafficking in persons. Contractors and contractor employees shall not engage in severe forms of trafficking in persons during the period of performance of the contract; procure commercial sex acts during the period of performance of the contract; or use forced labor in the performance of the contract. The Contractor shall notify its employees of the United States Government’s zero tolerance policy, the actions that will be taken against employees for violations of this policy. The contractor shall take appropriate action, up to and including termination, against employees or subcontractors that violate the US Government policy as described at FAR 22.17.

1.4.12 Reserved

1.4.13 Reserved

1.4.14 Organizational Conflicts of Interest (OCI): The contractor and subcontractor personnel performing services under this contract may receive, have access to or participate in the development of proprietary or source selection information (e.g., cost or pricing information, budget information or analyses, specifications or work statements, etc.) or perform evaluation services which may create a current or subsequent OCIs, as defined in FAR Subpart 9.5.

The contractor shall notify the KO immediately whenever it becomes aware that such access or participation may result in any actual or potential OCI and shall promptly submit a plan to the KO to avoid or mitigate any such OCI.

The contractor’s mitigation plan will be determined to be acceptable solely at the discretion of the KO. In the event the KO unilaterally determines that any such OCI cannot be satisfactorily avoided or mitigated, the KO may impose other remedies as he or she deems necessary, including prohibiting the contractor from participation in subsequent contracted requirements which may be affected by the OCI.

1.4.15 Reserved

2.0 Definitions and Acronyms:

2.1 Definitions:

2.1.1 Contractor: A supplier or vendor awarded a contract to provide specific supplies or service to the Government.

The term used in this contract refers to the prime.

2.1.2 Defective Service: A service output that does not meet the standard of performance associated with the PWS.

2.1.3 Deliverable: Anything that can be physically delivered and includes non-manufactured things such as meeting minutes or reports.

2.1.4 Key Personnel: Contractor personnel that are evaluated in a source selection process and that may be required to be used in the performance of a contract by the PWS. When key personnel are used as an evaluation factor in best value procurement, an offer can be rejected if it does not have a firm commitment from the persons that are listed in the proposal.

2.1.5 Physical Security: Actions that prevent the loss or damage of Government property.

2.1.6 Quality Assurance: The Government procedures to verify that services being performed by the Contractor are performed according to acceptable standards.

2.1.7 Quality Assurance Surveillance Plan (QASP): An organized written document specifying the surveillance methodology to be used for surveillance of contractor performance.

2.1.8 Quality Control: All necessary measures taken by the Contractor to ensure that the quality of an end product or service shall meet contract requirements.

2.1.9 Subcontractor: One that enters into a contract with a prime contractor. The Government does not have privity of contract with the subcontractor.

2.2 Acronyms:

AEI Army Enterprise Infostructure AR Army Regulation AT/OPSEC Antiterrorism/Operational Security BI Background Investigation CM Contract Manager COR Contracting Officer Representative DA Department of the Army DD254 Department of Defense Contract Security Classification Specification DFARS Defense Federal Acquisition Regulation Supplement DoD Department of Defense DSCA Defense Counterintelligence and Security Agency FAR Federal Acquisition Regulation

Solicitation W50S8R26Q0028

GFP/M/E/S Government Furnished Property/Material/Equipment/Services HQDA Headquarters, Department of the Army HSPD Homeland Security Presidential Directive IA Information Assurance IS Information System(s) KO Contracting Officer NGB National Guard Bureau OCI Organizational Conflict of Interest PII Personally Identifiable Information PIPO Phase In/Phase Out POC Point of Contact PRS Performance Requirements Summary PWS Performance Work Statement QA Quality Assurance QASP Quality Assurance Surveillance Plan QC Quality Control QCP Quality Control Program SCR Service Contract Reporting SSN Social Security Number TE Technical Exhibit USD(I) Under Secretary of Defense for Intelligence

3.0 Government Furnished Property, Material, Equipment and Services (GFP/M/E/S): The Government will not provide the property, material, equipment, and/or services listed below solely for the purpose of performance under this contract:

3.1 Property: RESERVED

3.2 Materials: RESERVED

3.3 Equipment: RESERVED

3.4 Services: RESERVED

3.5 Utilities: All utilities in the facility will be available for the contactor’s use in the performance of this contract.

The contractor shall instruct employees in utilities conservation practices. The contractor shall operate under conditions that preclude the waste of utilities, which include turning off the water faucets or valves after using the required amount.

4.0 Contractor Furnished Property, Materials, and Equipment (CFP/M/E):

4.1 General: Except for those items specifically stated to be Government-Furnished in Paragraph 3.0, the contractor shall furnish everything required to perform these services as indicated in Paragraph 1.1.

4.2 Secret Facility Clearance: RESERVED

4.3 Contractor Security Clearance: RESERVED

5.0 Requirements

Work shall include all accessories, parts, and equipment (to include Personal Protective Equipment—PPE) necessary to restore a safe and usable facility. The contractor shall:

5.1 General

The Contractor shall furnish all labor, material, and appurtenances required to perform comprehensive rodent post-infestation cleanup, biological waste remediation (including carcasses, droppings, and nesting material), and targeted disinfection services for the designated facility, restoring the environment to a safe, sanitary, and hazard-free condition fit for human occupancy.

5.2 Specific Tasks

5.2.1 Site Preparation and Safety

Establish safe working conditions, maintain rigorous occupational hygiene, and prevent cross-contamination in accordance with OSHA 29 CFR 1910.132 (Personal Protective Equipment), OSHA 29 CFR 1910.1200 (Hazard Communication), and OSHA 29 CFR 1910.141 (Sanitation).

All employees performing the cleanup must be fully trained on biological and chemical hazards, proper PPE selection/use, and respiratory protection. In compliance with Hazard Communication standards, Safety Data Sheets (SDS) for all chemical disinfectants and biocides must be readily accessible on-site. To maintain proper sanitation, adequate washing facilities must be provided, and all biohazardous waste must be collected and disposed of in sealed, labeled containers. Facility HVAC must be secured, or localized negative-pressure ventilation established, to prevent the spread of aerosolized pathogens.

5.2.2 Biohazard Removal and Disinfection

• Infection Control: Apply infectious control cleaning and disinfection to all designated impacted surfaces and areas.

• Definition of Impacted Areas: Any surface or space where physical evidence of rodent activity (droppings, urine, nesting, dander, or rub marks) is identified.

• Mandatory Scope: Areas shall include, but are not limited to: floors, walls, countertops, plumbing fixtures, bathroom accessories, kitchen/breakroom appliances (including inside cabinets and drawers) and workstations.

• Biohazard Removal: Prior to disturbance, thoroughly saturate all visible droppings, urine, and nesting sites with an EPA-registered List Q, Tier 1 disinfectant to neutralize potential viral pathogens. Perform safe extraction of primary contaminants (urine, droppings) without sweeping or dry vacuuming to prevent aerosolizing pathogens.

• Dwell Time: Adhere strictly to the manufacturer’s required dwell time before wiping up contaminated materials.

• Deep Cleaning: After all visible droppings have been removed and disinfected, perform physical removal of all remaining dirt and debris utilizing commercial-grade HEPA vacuums on floors, baseboards, and crevices. Wash hard surfaces with an approved industrial detergent and water.

• Final Disinfection: Apply EPA-registered general disinfectants using wet-wiping or electrostatic spraying to eradicate remaining pathogens from all affected hard, non-porous surfaces.

5.3 Waste Management and Disposal

• The Contractor shall remove and dispose of contaminated equipment and porous materials (e.g., ceiling tiles, insulation) that cannot be cleaned and disinfected.

• The Contractor is responsible for providing all waste containment and disposal. All biological waste, contaminated materials, and biohazard bags shall be disposed of from the premises in compliance with Ohio EPA, Infectious Waste guidelines, and all local, state, and federal regulations.

5.4 Rodent Count and Disposal

The Contractor shall maintain an accurate daily count of all rodent carcasses recovered and removed during the execution of all cleaning and disinfection services. Handling and reporting shall adhere to the following instructions:

• Neutralization & Recovery: Prior to handling, spray all rodent carcasses and the immediate surrounding area with an approved EPA-registered List Q, Tier 1 disinfectant to neutralize potential pathogens. Collect carcasses using tools (e.g., tongs, shovel) and do not handle them directly.

• Documentation: Record the date, time, and exact facility room/location for every carcass recovered.

• Disposal: Double-bag the carcasses in heavy-duty, sealed biohazard bags and dispose of them off-site in accordance with local, state, and federal biohazard waste disposal regulations.

• Reporting: Deliver the final cumulative count and location log to the Contracting Officer's Representative

(COR) upon completion of the work.

5.5 Compliance

All work must comply with Occupational Safety and Health Administration (OSHA) standards, Ohio Department of Health requirements and licensing, and Centers for Disease Control and Prevention (CDC) guidelines for rodent cleanup (including Hanta Virus precautions).

5.5.1 ENVIRONMENTAL COMPLIANCE: Provide and maintain, during the life of the contract, environmental protection as defined. Plan for and provide environmental protective measures to control pollution that develops during performance of the contract. Plan for and provide environmental protective measures required to correct conditions developing during contract performance which may have a negative effect on the natural and cultural environment. Protect the environmental resources within the project boundaries and those affected outside the limits of permanent work during the entire duration of this Contract. Comply with federal, state, and local regulations pertaining to the environment, including air, cultural and natural resources, hazardous materials, solid waste, hazardous waste, noise, pesticides, toxic substances, and water quality.

5.5.2 HAZARDOUS MATERIALS AND HAZARDOUS WASTE: Do not bring hazardous material onto Government property that does not directly relate to requirements for the performance of this contract. Use hazardous materials in a manner that minimizes the amount of hazardous waste generated. Certify that hazardous materials removed from the site are hazardous materials and do not meet the definition of hazardous waste, in accordance with 40 CFR 261. Do not bring hazardous waste onto Government property. Do not dispose of hazardous waste on Government property. Do not discharge any waste to a sanitary sewer, storm drain, or to surface waters or conduct waste treatment or disposal on Government property. Manage hazardous waste in accordance with all federal, state, local, laws and regulations. Store hazardous wastes in approved containers in accordance with 49 CFR 173 and 49 CFR 178. Hazardous waste generated within the confines of Government facilities is identified as being generated by the Government.

5.5.3 DISPOSAL DOCUMENTATION FOR HAZARDOUS AND REGULATED WASTE: Contact the Contracting Officer or Contracting Officer Representative for the facility RCRA identification number that is to be used on each manifest. Submit a copy of the applicable EPA and or state permit(s), manifest(s), or license(s) for transportation, treatment, storage, and disposal of hazardous and regulated waste by permitted facilities. Provide a hazardous waste manifest to the Installation Environmental Management Office for review, approval, and signature prior to shipping waste off Government property. Submit any waste manifests in the EPA’s eManifest system. The installation can no longer accept paper copies and must manage all waste manifests electronically. To obtain specific disposal instructions, coordinate with the Installation Environmental Management Office.

5.5.4 QUALIFIED RECYCLING PROGRAM (QRP): In accordance with Air Force Manual 32-7002:

“Environmental Compliance and Pollution Prevention”, the Contractor shall participate in the installation’s Qualified Recycling Program.

5.5.4.1 Segregate the following materials generated during contract performance: ferrous and non-ferrous scrap metal, and scrap copper including cable and wire. Place items in separate containers apart from normal debris. Label containers to prevent non-QRP materials from being disposed of in the containers. Ensure security of the containers to prevent theft. Arrange for transport or deliver QRP materials to a licensed recycler.

5.5.4.2 Obtain weight tickets, sales price, and sale amount for Environmental Management Office records. The following forms of payment from the recycler are acceptable: Bank Drafts, Cashier’s Checks and Certified Checks.

Payment should be to the order of:

U.S. Treasury Attn: 179th Environmental 1947 Harrington Memorial Rd.

Mansfield, Ohio 44903

5.5.4.3 On a monthly basis, provide copies of the recycling facility’s weight tickets, receipts, bills of sale, and other sales documentation. In lieu of sales documentation, a statement indicating the disposal location for the recycled materials that is signed by an employee authorized to legally obligate or bind the firm may be submitted. The sales documentation must include the receiver's tax identification number and business, EPA or state registration number, along with the receiver's delivery and business addresses and telephone numbers.

5.6 Deliverables

• 5.6.1 Work Plan & Safety Protocol: Provide a detailed document outlining the cleaning methodology, chemicals to be used (including Safety Data Sheets), and PPE protocols within three (3) days prior to project commencement.

• 5.6.2 Project Schedule: Provide an estimated schedule of tasks, noting the critical path for task completion.

• 5.6.3 Certificate of Decontamination: Upon completion, provide a signed document certifying that all areas have been cleaned, disinfected, and are safe for human occupancy pursuant to CDC guidelines. This must include a Biohazard Cleaning Certification through the International Janitorial Cleaning Services Association (IJCSA) or equivalent.

• 5.6.4 Rodent Recovery and Disposal Log: Submit the final log with the Certificate of Decontamination.

5.7 Cleaning Product and Hazardous Material Management

5.7.1 Pre-Performance Submission Requirements:

• List of Proposed Cleaning Products: Within 10 days of contract award, the Contractor shall submit a comprehensive list of proposed cleaning products to the COR for approval. This list must include product names, manufacturers, and intended uses.

• Safety Data Sheets (SDS): The Contractor shall provide a log of the Safety Data Sheets (SDS) for each product, compliant with OSHA 29 CFR 1910.1200. An SDS for all products must also be submitted to the Environmental Management Office for approval prior to use.

• Contractor HM Tracking Inventory Form: The Contractor must complete and submit a 179CW

Contractor HM Tracking Inventory Form prior to using any cleaning products on the installation.

Solicitation W50S8R26Q0028

5.7.2 Compliance with Specifications:

• Chemical Requirements: Cleaning chemicals shall conform to the requirements specified in Chapter 2, Section 2, TM 5-609.

• Labeling and Storage: All cleaning chemicals shall be conspicuously marked with their manufacturers’ labels.

• New Products: Any new or substitute products must be approved by the COR prior to use.

• Ongoing Inventory Log: The Contractor shall maintain an ongoing log of all materials and supplies used, stored, or purchased to meet the requirements of this PWS.

6.0 Applicable Publications: Publications applicable to this PWS are listed below:

Publication (Chapter/Page)

Date of Publication

Mandatory or Advisory

Website

Federal Acquisition Regulation https://www.acquisition.gov/?q=browsefar Defense Federal Acquisition Regulation

Supplement http://www.acq.osd.mil/dpap/dars/dfarspgi/current/index.

html or https://www.acquisition.gov/dfars Joint Travel Regulation (JTR) https://www.defensetravel.dod.mil/site/travelreg.cfm

DoDM 1000.13-M-V1 DoD Identification (ID) Cards (Enclosure 2, paragraph 3.b)

01/23/2014 (Change 1:

07/28/2020) http://www.esd.whs.mil/Directives/issuances/dodm

Federal Information Processing Standards (FIPS) Publication 201-2

Personal Identity Verification (PIV) of Federal Employees and Contractors

(paragraph 9)

August 2013 http://nvlpubs.nist.gov/nistpubs/FIPS/NIST.FIPS.201- 2.pdf

DoDM 5200.2 Procedures for the DoD Personnel Security Program (PSP)

04/03/2017 https://www.esd.whs.mil/Directives/issuances/dodm/

DoDI 5200.46 DoD Investigative and Adjudicative

Guidance for Issuing the Common Access Card (CAC)

09/09/14 (Change 1:

05/04/2018) https://www.esd.whs.mil/Directives/issuances/dodi/

Homeland Security Presidential Directive

(HSPD)-12

Policy for a Common Identification Standard for Federal Employees and

Contractors

08/27/2004 https://www.dhs.gov/homeland-security-presidential-directive-12

DoDI 5400.11 Department of Defense Privacy and Civil

Liberties Programs

01/29/2019

DoD 5400.11-R Department of Defense Privacy Program

05/14/2007 https://www.esd.whs.mil/Directives/issuances/dodm/

DoDD 8140.01 Cyberspace Workforce Management

10/05/2020 https://www.esd.whs.mil/Directives/issuances/dodd/

Dated 16 July 2026 https://www.acquisition.gov/?q=browsefar http://www.acq.osd.mil/dpap/dars/dfarspgi/current/index.html http://www.acq.osd.mil/dpap/dars/dfarspgi/current/index.html https://www.acquisition.gov/dfars http://www.esd.whs.mil/Directives/issuances/dodm http://nvlpubs.nist.gov/nistpubs/FIPS/NIST.FIPS.201-2.pdf http://nvlpubs.nist.gov/nistpubs/FIPS/NIST.FIPS.201-2.pdf https://www.esd.whs.mil/Directives/issuances/dodm/ https://www.esd.whs.mil/Directives/issuances/dodi/ https://www.dhs.gov/homeland-security-presidential-directive-12 https://www.dhs.gov/homeland-security-presidential-directive-12 https://www.esd.whs.mil/Directives/issuances/dodd/

DoD 8570.01-M Information Assurance Workforce

Improvement Program

12/19/2005 (Change 4:

11/10/2015) https://www.esd.whs.mil/Directives/issuances/dodm/

DoD 5220.22-M National Industrial Security Program

Operating Manual (NISPOM)

02/28/2006 (Change 2:

05/18/2016) https://www.esd.whs.mil/Directives/issuances/dodm/

Army Directive 2014-05 Policy and Implementation Procedures for Common Access Card Credentialing and Installation Access for Uncleared

Contractors

03/07/2014 https://armypubs.army.mil/ProductMaps/PubForm/Army Dir.aspx

AR 25-2

Information Assurance

04/04/2019 http://armypubs.army.mil/ProductMaps/PubForm/AR.asp x

AR 530-1

Operations Security

09/26/2014 http://armypubs.army.mil/ProductMaps/PubForm/AR.asp x

AR 525-13

Antiterrorism

12/09/2019 http://armypubs.army.mil/ProductMaps/PubForm/AR.asp x

AR 381-12

Threat Awareness and Reporting

Program (TARP) (Section II, ¶ 2-4.b)

06/01/2016 http://armypubs.army.mil/ProductMaps/PubForm/AR.asp x

AFI 10-245

Antiterrorism

03/28/2013 (Certified current 03/30/2017) https://www.e-publishing.af.mil/Product- Index/#/?view=pubs&orgID=10141&catID=1&series=-

1&modID=449&tabID=131

AFI 31-101

Security Forces Standards and Procedures

08/18/2020 https://www.e-publishing.af.mil/Product- Index/#/?view=pubs&orgID=10141&catID=1&series=-

1&modID=449&tabID=131

AFMAN 31-113

Security Forces Standards and Procedures 03/05/2013 Change 1:

12/02/2015 https://www.e-publishing.af.mil/Product- Index/#/?view=pubs&orgID=10141&catID=1&series=-

1&modID=449&tabID=131

AFPD 17-1

Information Dominance Governance and Management

04/12/2016 https://www.e-publishing.af.mil/Product- Index/#/?view=pubs&orgID=10141&catID=1&series=-

1&modID=449&tabID=131

AFMAN 17-1301

Computer Security (COMPUSEC) 02/12/2020 https://www.e-publishing.af.mil/Product-

Index/#/?view=pubs&orgID=10141&catID=1&series=- 1&modID=449&tabID=131

AFI 10-701

Operations Security

7/24/2019 (Change 1:

06/09/2020) https://www.e-publishing.af.mil/Product- Index/#/?view=pubs&orgID=10141&catID=1&series=-

1&modID=449&tabID=131 DAFMAN 32-7002 13 Jun 2025 M https://www.e-publishing.af.mil/Product-

Index/#/?view=pubs&orgID=10141&catID=1&series=15 &modID=449&tabID=131

6.1 Applicable Forms: Forms applicable to the PWS are listed below:

Form Date Website DD 1172-2 Mar 2017 http://www.dtic.mil/whs/directives/forms/index.htm

Solicitation W50S8R26Q0028 Attachment 1 Performance Work Statement

Dated 16 July 2026 https://www.esd.whs.mil/Directives/issuances/dodm/ https://www.esd.whs.mil/Directives/issuances/dodm/ http://armypubs.army.mil/ProductMaps/PubForm/AR.aspx http://armypubs.army.mil/ProductMaps/PubForm/AR.aspx http://armypubs.army.mil/ProductMaps/PubForm/AR.aspx http://armypubs.army.mil/ProductMaps/PubForm/AR.aspx http://armypubs.army.mil/ProductMaps/PubForm/AR.aspx http://armypubs.army.mil/ProductMaps/PubForm/AR.aspx http://armypubs.army.mil/ProductMaps/PubForm/AR.aspx http://armypubs.army.mil/ProductMaps/PubForm/AR.aspx http://www.dtic.mil/whs/directives/forms/index.htm

Application for Identification Card/DEERS Enrollment

I-9 Employment Eligibility Verification

10/21/2019 https://www.uscis.gov/sites/default/files/files/form/i-9.pdf

DD 441

Department of Defense Security

Agreement

Feb 2020 http://www.dtic.mil/whs/directives/forms/dd/ddforms0001-0499.htm

DD 250

Material Inspection and Receiving

Report

Aug 2000 https://www.esd.whs.mil/Directives/forms/dd0001_0499/

Dated 16 July 2026 http://www.dtic.mil/whs/directives/forms/forminfo/forminfopage2479.html http://www.dtic.mil/whs/directives/forms/forminfo/forminfopage2479.html https://www.uscis.gov/sites/default/files/files/form/i-9.pdf http://www.dtic.mil/whs/directives/forms/dd/ddforms0001-0499.htm https://www.esd.whs.mil/Directives/forms/dd0001_0499/

TECHNICAL EXHIBIT 1

Performance Requirements Summary (PRS)

This PRS includes performance objectives the Government will use to determine contractor performance and will compare contractor performance to the Acceptable Quality Level (AQL).

Performance Objective

Performance Standard Acceptable Quality Levels (AQL)

Surveillance Method / By Whom

5.2.1 Site

Preparation and

Safety

Establish safe working conditions, maintain rigorous occupational hygiene, and prevent cross-contamination in accordance with OSHA 29 CFR

1910.132 (Personal Protective Equipment), OSHA 29 CFR

1910.1200 (Hazard Communication), and OSHA 29 CFR 1910.141 (Sanitation).

100% compliance with

OSHA 29 CFR 1910.132,

1910.1200, and 1910.141.

Workers are wearing proper PPE, are trained on hazards, and SDS for all chemicals are readily accessible on-site..

Visual Inspection / COR

5.2.2 Biohazard

removal

Apply infectious control cleaning and disinfection to all designated impacted surfaces and areas.

100% Compliance with all impacted areas are free of droppings, urine, nesting, dander, rub marks, or visible residue.

Direct Observation & Product Label Check / COR

5.5, 5.6, and 5.7 Compliance with Environmental &

Safety Regulations

All cleaning and waste treatment chemicals are pre-approved by

Environmental Management and used in accordance with regulations

100% compliance with pre-approval requirements and safe handling procedures

Review of chemical approvals, inspection of MSDS records, and periodic compliance checks

Solicitation W50S8R26Q0028

TECHNICAL EXHIBIT 2

Deliverables Schedule

PWS Reference / Deliverable Title

Frequency Number of Copies

Medium/Format Submit To

1.4.5.3 AT Level 1

Awareness Training

Certificates

Provide within 15 calendar days after employee completes training.

1 Electronic Submission

COR

1.4.10 Identification

Media

Return within 14 days of employee’s departure from contract performance.

Original(s) Hard Copy KO

5.7 Hazardous

Materials Safety Data

Sheets (SDS)

Provide prior to commencing work for each hazardous material being used.

1 Electronic or Hard Copy

COR

5.5.3 Hazardous

Waste Disposal Documentation

Provide prior to shipping waste off the installation

1 E-manifest Only COR

5.5.4 QRP Sales

Documentation and

Proceeds

Within 3 working days of sale. 1 Hard Copy COR

5.7 List of Cleaning

Products / Chemicals

10 Calendar days after award and prior to the use of new unapproved cleaning products

1 Digital (PDF or Email)

COR

1.4.5.1. Reserved