Performance Work Statement.pdf

Ver. October 2022

PERFORMANCE WORK STATEMENT (PWS)

FOR

Repaint of AGE System Support Equipment

1.0 General: Contractor shall remove green or tan chemical agent resistive coating CARC paint and repaint with SAE-AMSSTD-595, tan color no. 30279, MIL-PRF85285, Type IV as well as provide all materials, labor, transportation, and expendable supplies to perform the repaint of 3 system support equipment items.

1.1 Scope: The contractor shall provide all materials, labor, transportation, and expendable supplies necessary, except as specified in Paragraph 3.0 as Government Furnished, to perform the following functions: disassemble, corrosion control, prepare, prime and paint interior, exterior, door jams and reassemble of doors; repair minor cracks by welding and repaint; remove, order, and replace damaged unit data plates;

prepare, prime and painting functions of undercarriages.

1.1.1 Objectives: Corrosion Control of Age Equipment by means to Complete Equipment Painting.

1.2 Background: Contractor shall transport AGE Equipment from 114 EWS to and from their facility and complete all Paint related work at their facility IAW Air Force Paint Standards.

1.3 Period of Performance (PoP): The Period of Performance shall be 1 Base Year of 12 months.

1.4 General Information:

1.4.1 Place and Performance of Services: The contractor shall provide services, adequate work force and performance of all tasks defined within this PWS at their own location with exceptions for equipment pickup and drop off. The 114 EWS will not dictate the company’s hours of operation, shift schedule, or workday schedule and leave it up to the award contract company to perform required service to minimize equipment downtime. Any delay in performance of work due to backorders from outside vendors concerning parts, supply or material need to be relayed to the 114 EWS as early as possible. Awarded contract company must coordinate with the 114 EWS for pickup and delivery to avoid possible delays during US federal holidays or when the Government facility/installation is closed due to local or national emergencies, administrative closings, or similar Government-directed facility/installation closings.

1.4.1.1 Reserved

1.4.1.2 Unscheduled gate closures by the Security Police may occur at any time causing all personnel entering or exiting a closed installation to experience a delay. This cannot be predicted or prevented. Contractors are not compensated for unexpected closures or delays. Vehicles operated by contractor personnel are subject to search pursuant to applicable regulations. Any moving violation of any applicable motor vehicle regulation may result in the termination of the contractor employee’s installation driving privileges.

1.4.1.3 The contractor’s employees shall become familiar with and obey the regulations of the installation, including fire, traffic, safety and security regulations while on the installation. Contractor employees should only enter restricted areas when required to do so and only upon prior approval. All contractor employees shall carry proper identification with them at all times and shall be subject to such checks as may be deemed necessary. The contractor shall ensure compliance with all regulations and orders of the installation, which may affect performance. The Government reserves the right to direct the removal of an employee from Government property or revoke access to Government systems for misconduct, security reasons, or any overt evidence of communicable disease. Removal of contractor employees for reasons stated above does not relieve the Contractor from responsibility for total performance of this contract.

1.4.2 Recognized Holidays: The following are recognized United States (US) holidays.

The contractor shall not pick up or deliver equipment on these days without prior approval from the 114 EWS/CC:

1.4.2.1 New Year’s Day: January 1st

1.4.2.2 Martin Luther King, Jr.’s Birthday

1.4.2.3 President’s Day

1.4.2.4 Memorial Day

1.4.2.5 Juneteenth National Independence Day: June 19th

1.4.2.6 Independence Day: July 4th

1.4.2.7 Labor Day

1.4.2.8 Indigenous Peoples’ Day

1.4.2.9 Veteran’s Day: November 11th

1.4.2.10 Thanksgiving Day

1.4.2.11 Christmas Day: December 25th

1.4.3 Quality Control (QC): The contractor shall develop and maintain an effective QC Plan (QCP) to ensure services are performed in accordance with this PWS. The contractor shall develop and implement procedures to identify, prevent, and ensure non-recurrence of defective services. The contractor’s QCP is the means by which it assures itself that its work complies with the requirements of the contract. As a minimum, the contractor shall develop QC procedures that address the areas identified in Technical Exhibit 1, Performance Requirements Summary (PRS). A final QCP shall be submitted to the Contracting Officer Representative (COR) NLT 10 days after contract award.

After acceptance of the QCP, the contractor shall obtain the Contracting Officer’s (KO’s) acceptance in writing of any proposed changes to its QCP.

1.4.4 Quality Assurance (QA): The Government will evaluate the contractor’s performance under this contract in accordance with the Quality Assurance Surveillance Plan (QASP). This plan is primarily focused on what the Government will do to ensure that the contractor has performed in accordance with the performance standards. It defines how the performance standards will be applied, the frequency of surveillance, and acceptable quality level(s) or defect rate(s).

1.4.5 Access and General Protection/Security Policy and Procedures: The contractor shall comply with all applicable installation/facility access and local security policies and procedures, which may be obtained from the Contracting Officer’s Representative (COR). The contractor shall also provide all information required for background checks to meet installation access requirements to be accomplished by the local installation’s Security Forces, Director of Emergency Services or local Security Office. The contractor shall ensure compliance with all personal identity verification requirements as directed by DoD, Headquarters Air Force (HAF) and/or local policy. Should the Force Protection Condition (FPCON) change, the Government may require changes in contractor security matters or processes.

1. The contractor shall obtain base identification and vehicle passes, if required, for all contractor personnel who make frequent visits to or perform work on the Air Force installation(s) cited in the contract. Contractor personnel are required to wear or prominently display installation identification badges or contractor-furnished, contractor identification badges while visiting or performing work on the installation.

2. Reserved

3. Reserved

4. When work under this contract requires escorted entry to controlled or restricted areas, the contractor shall comply with all directions provided by 114 EWS while in the controlled or restricted areas.

5. Reserved

6. Failure to comply with these requirements may result in withholding of final payment.

1.4.5.1. Common Access Cards: Reserved

1.4.5.1.1 Homeland Security Presidential Directive (HSPD)-12 Background Investigation Requirements: Reserved

1.4.5.1.2 Reserved

1.4.5.1.3 Reserved

1.4.5.1.4 Reserved

1.4.5.1.5 Reserved

1.4.5.1.5.1 Reserved

1.4.5.1.6 Reserved

1.4.5.2 For Contractors that do not require CAC, but require access to a DoD Facility and/or Installation. Contractor and all associated sub-contractors employees shall comply with adjudication standards and procedures using the National Crime Information Center Interstate Identification Index (NCIC-III) and Terrorist Screening Database (TSDB) (Air Force Instruction (AFI) 10-245, AFI 31-101 and Air Force Manual (AFMAN) 31-113), applicable installation, facility and area commander installation/facility access and local security policies and procedures (provided by Government representative)

1.4.5.3 Reserved

1.4.5.4 Reserved

1.4.5.5 Communications Security/Information Technology (COMSEC/IT) Security: All communications with DoD organizations are subject to COMSEC review. All telephone communications networks are continually subject to intercept by unfriendly intelligence organizations. DoD has authorized the military departments to conduct COMSEC monitoring and recording of telephone calls originating from, or terminating at, DoD organizations. Therefore, the contractor is advised that any time contractor personnel place or receive a call they are subject to COMSEC procedures. The contractor shall ensure wide and frequent dissemination of the above information to all employees dealing with DoD information. The contractor shall abide by all Government regulations concerning the authorized use of the Government's computer network, including the restriction against using the network to recruit Government personnel or advertise job openings.

1.4.5.6 Reserved

1.4.5.6.1 Reserved

1.4.5.6.2 Reserved

1.4.5.6.3 Reserved

1.4.5.6.4 Reserved

1.4.5.6.5 Reserved

1.4.5.7 Reserved

1.4.5.8 Reserved

1.4.5.9 Reserved

1.4.5.10 Reserved

1.4.5.11 Reserved

1.4.5.12 Reserved

1.4.5.13 Reserved

1.4.5.14 Reserved

1.4.6 Physical Security: The contractor shall safeguard all Government property provided for contractor use. At the close of each work period, Government facilities, equipment and materials shall be secured.

1.4.6.1 Key Control. Reserved

1.4.6.1.1 Reserved

1.4.6.1. Reserved

1.4.6.1.3 Reserved

1.4.6.2 Lock Combinations. Reserved

1.4.7 Special Qualifications. Reserved

1.4.9 Contract Manager (CM): The contactor shall designate a CM who shall ensure performance under this contract. The name of this person, and an alternate who shall act for the contractor when the CM is absent, shall be designated in writing to the KO.

The CM or alternate shall have full authority to act for the contractor on all contract matters relating to daily operation of this contract. The CM shall work through the COR to resolve issues, receive technical instructions, and ensure adequate performance of services. The CM shall ensure that contractor employees do not perform any services outside the scope of the contract without an official modification issued by the KO. The CM shall ensure contractor employees understand that services performed outside the scope of the contract are performed wholly at the expense of the contractor.

1.4.10 Identification of Contractor Employees. Reserved

1.4.10.1 Reserved

1.4.11. Combating Trafficking in Persons: The United States Government has adopted a zero tolerance policy regarding trafficking in persons. Contractors and contractor employees shall not engage in severe forms of trafficking in persons during the period of performance of the contract; procure commercial sex acts during the period of performance of the contract; or use forced labor in the performance of the contract. The Contractor shall notify its employees of the United States Government’s zero tolerance policy, the actions that will be taken against employees for violations of this policy. The contractor shall take appropriate action, up to and including termination, against employees or subcontractors that violate the US Government policy as described at

FAR 22.17.

1.4.12 Contractor Travel. Reserved

1.4.13 Data Rights. Reserved

1.4.14 Organizational Conflicts of Interest (OCI): The contractor and subcontractor personnel performing services under this contract may receive, have access to or participate in the development of proprietary or source selection information (e.g., cost or pricing information, budget information or analyses, specifications or work statements, etc.) or perform evaluation services which may create a current or subsequent OCIs, as defined in FAR Subpart 9.5. The contractor shall notify the KO immediately whenever it becomes aware that such access or participation may result in any actual or potential OCI and shall promptly submit a plan to the KO to avoid or mitigate any such OCI. The contractor’s mitigation plan will be determined to be acceptable solely at the discretion of the KO. In the event the KO unilaterally determines that any such OCI cannot be satisfactorily avoided or mitigated, the KO may impose other remedies as he or she deems necessary, including prohibiting the contractor from participation in subsequent contracted requirements which may be affected by the OCI.

1.4.15 Phase In / Phase Out Periods. Reserved

2.0 Definitions and Acronyms:

2.1 Definitions:

2.1.1 Contractor: A supplier or vendor awarded a contract to provide specific supplies or service to the Government. The term used in this contract refers to the prime.

2.1.2 Defective Service: A service output that does not meet the standard of performance associated with the PWS.

2.1.3 Deliverable: Anything that can be physically delivered and includes non-manufactured things such as meeting minutes or reports.

2.1.4 Key Personnel: Contractor personnel that are evaluated in a source selection process and that may be required to be used in the performance of a contract by the PWS. When key personnel are used as an evaluation factor in best value procurement, an offer can be rejected if it does not have a firm commitment from the persons that are listed in the proposal.

2.1.5 Physical Security: Actions that prevent the loss or damage of Government property.

2.1.6 Quality Assurance: The Government procedures to verify that services being performed by the Contractor are performed according to acceptable standards.

2.1.7 Quality Assurance Surveillance Plan (QASP): An organized written document specifying the surveillance methodology to be used for surveillance of contractor performance.

2.1.8 Quality Control: All necessary measures taken by the Contractor to ensure that the quality of an end product or service shall meet contract requirements.

2.1.9 Subcontractor: One that enters into a contract with a prime contractor. The Government does not have privity of contract with the subcontractor.

2.2 Acronyms:

AEI Army Enterprise Infostructure AR Army Regulation AT/OPSEC Antiterrorism/Operational Security BI Background Investigation CM Contract Manager COR Contracting Officer Representative DA Department of the Army DD254 Department of Defense Contract Security Classification Specification DFARS Defense Federal Acquisition Regulation Supplement DoD Department of Defense DSCA Defense Counterintelligence and Security Agency FAR Federal Acquisition Regulation GFP/M/E/S Government Furnished Property/Material/Equipment/Services HQDA Headquarters, Department of the Army HSPD Homeland Security Presidential Directive IA Information Assurance IS Information System(s) KO Contracting Officer NGB National Guard Bureau OCI Organizational Conflict of Interest PII Personally Identifiable Information PIPO Phase In/Phase Out

POC Point of Contact PRS Performance Requirements Summary PWS Performance Work Statement QA Quality Assurance QASP Quality Assurance Surveillance Plan QC Quality Control QCP Quality Control Program SCR Service Contract Reporting SSN Social Security Number TE Technical Exhibit USD(I) Under Secretary of Defense for Intelligence

3.0 Government Furnished Property, Material, Equipment and Services (GFP/M/E/S):

The Government will provide the property, material, equipment, and/or services listed below solely for the purpose of performance under this contract:

3.1 Property: Reserved

3.2 Materials: Reserved

3.3 Equipment: A 10,000 lbs. all terrain forklift and a unit member to operate will be at pickup and delivery on Cape Canaveral Space Force Station.

3.4 Services: Reserved

3.5 Utilities: Reserved

4.0 Contractor Furnished Property, Materials, and Equipment (CFP/M/E): Service, Non-personal: The contractor shall provide all materials, labor, personnel, transportation, equipment, and expendable supplies necessary (including primer and paint), to perform refurbishment services for powered and non-powered AGE equipment to repair and paint the exterior surfaces for the items listed below. The contractor shall prepare equipment to include operational check to provide evaluation identifying discrepancies and loading equipment on contractor’s vehicle prior to transport. The contractor shall comply with all Air Force guidance and regulations applicable to each group of AGE equipment for removal/disassemble housing assembly components, power cables assemblies, panels, and other components required to effectively remove/treat corrosion and failed coatings. The contractor shall ensure that areas requiring no paint or blasting will be removed or taped-off before refurbishment is accomplished.

4.1 General: Except for those items specifically stated to be Government-Furnished in Paragraph 3.0, the contractor shall furnish everything required to perform these services as indicated in Paragraph 1.1.

4.2 Secret Facility Clearance: Reserved

4.3 Contractor Security Clearance: Reserved

5.0 Requirements: The contractor shall: Contractor will transport AGE Equipment to and from 114th EWS Facility to their Facility to complete all paint requirements. The contractor shall provide all materials, labor, personnel, transportation, equipment, and expendable supplies necessary (including primer and paint), to perform refurbishment services for powered and non-powered AGE equipment to repair and paint the exterior surfaces of the items listed below. The contractor shall prepare equipment to include operational check to provide evaluation identifying discrepancies and loading equipment on contractor’s vehicle prior to transport. The contractor shall comply with all Air Force guidance and regulations applicable to each group of AGE equipment for removal/ disassemble housing assembly components, power cables assemblies, panels, and other components required to effectively remove/treat corrosion and failed coatings. The contractor shall ensure that areas requiring no paint or blasting will be removed or taped-off before refurbishment is accomplished. The contractor shall remove green or tan chemical agent resistive coating CARC paint and repaint with SAE-AMSSTD-595, tan color no. 30279, MIL-PRF85285, Type IV as well as provide all materials, labor, transportation, and expendable supplies to perform doors- disassemble, corrosion control, prepare, prime and paint interior, exterior, door jams and reassemble, cracks-repair minor cracks by welding and repaint unit data plates- remove, order, and replace damaged unit data plates, undercarriages-perform preparation, prime and painting functions.

5.1 The contractor shall complete all Age Equipment corrosion control and complete unit paint IAW Air Force Paint standards.

Location: 114th Electromagnetic Squadron, Cape Canaveral, FL

FREQUECY: Due to the complexity of the mission, the members will work with the contractor on the equipment paint schedule in one of two ways – individual pieces or phase workloads. It is requested no more than 21 working days be consumed to pick up, paint, and return each piece of equipment to the 114th Electromagnetic Squadron, Cape Canaveral, FL if done so individually. If done in phases, the phase loads will be set by a government representative and contractor to ensure all requirements are met prior to painting.

EQUIPMENT TYPE QUANITITY

MEP-1070 Generator 3 each

5.2 Acceptance of Equipment:

a. Prior to receiving equipment, inspect it thoroughly for damage.

b. Record and inform government representative.

5.3 Proper preparation of all equipment surfaces required for painting to include:

a. Inspecting and removal of all exterior surface rust to include sand blasting and welding repairs as necessary.

b. Applying of primer to those areas where rust has been removed.

c. Sand and scuff smooth the entire exterior surface of each piece of equipment.

d. Sand and scuff the interior surfaces of access doors.

e. Taping of reflective lenses, nomenclature placards, hydraulic hoses, etc.

f. Removing all panels necessary to minimize overspray on or in critical areas

(coolant coils, engine area, hot areas etc...).

g. The Contractor shall clean each unit and its components in accordance with (IAW) Technical Order (T.O.) 1-1-691, Cleaning and Corrosion Prevention Control. Remove existing coatings utilizing one of the approved methods in T.O.

1-1-8, Application and Removal of Aerospace and Non-Aerospace Equipment, and T.O. 35-1-3, Corrosion Prevention and Control, Cleaning, Painting, and Marking of USAF Support Equipment (SE) to treat corrosion and restore original surface contour. Mask instruments, machined surfaces, engine and generator assemblies and electrical/electronic components to protect from overspray. Apply coating system as specified in T.O. 35-1-3, Table 3-1, and Authorized Coating Systems. Color shall be semi- gloss gray (Federal Standard 595, Color Number 26173, Type 1). Application method shall be IAW T.O. 35- 1-3, T.O. 1-1-8 and T.O. 1-1-691.

h. Abrasive Blasting for Refurbishment. The Contractor shall perform abrasive blasting identified in TO 35-1-3 and TO 1-1-691 as the most effective means by completely de-painting and removing corrosion from Support Equipment (SE). Using only approved abrasive blasting dry media, water blasting, or water blasting with abrasive injected into the water stream. Normally, blasting is required on non-powered ground equipment only. The Contractor shall have the means to abrasive using fine silica blasting media and water injected with media to prevent warping of lighter ferrous panels. No abrasive blasting materials or personal protective equipment (PPE) will be provided by the Government.

5.4 Proper application of primer and topcoat. If there are any questions about what to paint and what not to paint please call the government representative. Paint and primer to be used is a special mil-spec polyurethane paint kit specified in equipment technical orders that will be provided to the contractor by the Government to include all MSDS's.

Blend all areas on painted surfaces to a smooth texture. All control panels behind the access doors will be painted. All gauges will be masked to minimize paint overspray. If the door opens to an engine compartment, painting will stop at the door. Ground points and copper points will NOT be painted. Undercarriage of all equipment will be painted.

5.5. Pickup and delivery of equipment to be painted.

a. Contractor shall provide pickup and delivery of equipment to 114th Electromagnetic Warfare Squadron, Cape Canaveral, FL

b. Equipment will be picked up and dropped off out front of the 114th Electromagnetic Warfare Squadron, Cape Canaveral, FL

5.6 Guarantee/Faulty Workmanship: Contractor will provide a limited One-Year Warranty during this time any defects noted due to faulty workmanship will be corrected.

5.7 Contractor Requirements: The Contractor shall reassemble and reinstall components IAW T.O. 1-1A-15, General Maintenance.

5.8 Instructions for Support Equipment (SE)

a. The Contractor shall comply with all local, state, and federal environmental regulations. The Contractor shall perform all services IAW manufacturer’s recommendations, industry standards and regulations. The Quality Assurance Surveillance Plan (QASP) has been prepared and is included in this Statement of Work (SOW). It includes standards of acceptable performance and the performance thresholds.

b. The Contractor shall employ FOD prevention measures as specified in AFI 21-101, Aircraft & Equipment Maintenance Management.

c. Schedule Compliance. The contracted services shall be performed as scheduled by the Government. The quantity/type of AGE equipment to be refurbished shall be reflected in the schedule provided to the Contractor. The schedule shall include the items to be picked-up for servicing and an expected delivery date. The Contractor shall perform equipment refurbishments within 45 business days (excluding weekends or holidays). If the Contractor fails or is unable to perform the refurbishment within the specified time, the Government reserves the right to use an alternate source for refurbishment of that particular equipment item and the Contractor forfeits payment for that item.

d. Changes and Cancellations. The Government reserves the right to partially or totally change or cancel scheduled services at no cost, provided notice is given to the Contractor by 1200 hours the day before pick-up.

5.9. Damage to Aerospace Ground Equipment: The Contractor shall assume liability for any damages to AGE powered and non-powered equipment, support equipment, and any other Government property caused by the Contractor or Contractor personnel in the performance of this contract. Any damage MUST be reported immediately to government representative. Fair wear and tear is excluded. The contractor shall be assessed the full cost (parts, labor, and administrative) of any repairs required to correct damages. The contractor is responsible for pointing out any equipment damages to the government representative prior to shipment of equipment to be refurbished. The contractor shall be responsible for signing documentation transferring equipment liability to the contractor prior to transportation and receive documentation from the 125th Fighter Wing, Detachment 1, Homestead ARB, FL, releasing responsibility from the contractor back to the Government when equipment is returned.

5.10 Government Responsibilities:

a. Government will provide all mil-spec information for primer and paint as specified in applicable technical publications.

b. Prior to pick up by the contractor, the following preparations will be accomplished by the Government for each piece of equipment:

1. Fuel and lubricants removed

2. Removal of components (i.e. hoses) that will hinder or obstruct painting.

3. Inspect all equipment for damage.

c. Government will provide detailed information for contractor about paint colors and any other information about equipment.

5.11 Joint Responsibilities:

a. Government representative and contractor will perform an initial joint inspection and determine the painting status of equipment.

b. Immediately notify government representative about unnoticed damage, damage caused by contractor, theft of equipment or any other equipment problems.

c. Notify the government representative on the status of the equipment during the painting process, should it not meet the schedule.

5.12 Security Requirements:

a. During performance of the service, the contractor will be escorted on base in order to pick up and drop off equipment items. The contractor will be required to call the government representative in order to set up the escort.

b. Traffic Laws. The Contractor and contractor employees shall comply with base traffic regulations.

c. Cellular Phone Operation Policy: The use of cellular phones while operating a motorized vehicle is prohibited on Cape Canaveral SFS, FL unless performing command and control functions. Although discouraged, drivers are authorized to use devices, i.e., ear bud or ear boom, which allows their cellular phone to be operated hands-free. The device must not cover both ears. This policy applies to everyone driving on Cape Canaveral SFS, FL.

d. Failure to comply with these requirements may result in withholding of final payment.

5.13 Contractor shall adhere to all Quality Control practices.

6.0 Applicable Publications: Publications applicable to this PWS are listed below:

Publication (Chapter/Page)

Date of Publication

Mandatory or Advisory

Website

Federal Acquisition Regulation https://www.acquisition.gov/?q=browsefar Defense Federal Acquisition

Regulation Supplement http://www.acq.osd.mil/dpap/dars/dfarspgi/current/in dex.html or https://www.acquisition.gov/dfars Homeland Security Presidential

Directive (HSPD)-12 Policy for a Common Identification

Standard for Federal Employees and Contractors

08/27/2004 https://www.dhs.gov/homeland-security-presidential-directive-12

DoD 5220.22-M National Industrial Security Program

Operating Manual (NISPOM)

02/28/2006 (Change 2:

05/18/2016) https://www.esd.whs.mil/Directives/issuances/dodm/

AFI 10-245

Antiterrorism

03/28/2013 (Certified current

03/30/2017) https://www.e-publishing.af.mil/Product- Index/#/?view=pubs&orgID=10141&catID=1&series

=-1&modID=449&tabID=131

AFI 31-101

Security Forces Standards and

Procedures

08/18/2020 https://www.e-publishing.af.mil/Product- Index/#/?view=pubs&orgID=10141&catID=1&series

=-1&modID=449&tabID=131

AFMAN 31-113

Security Forces Standards and Procedures

03/05/2013 Change 1:

12/02/2015 https://www.e-publishing.af.mil/Product- Index/#/?view=pubs&orgID=10141&catID=1&series

=-1&modID=449&tabID=131

AFI 10-701

Operations Security 7/24/2019 (Change 1:

06/09/2020) https://www.e-publishing.af.mil/Product- Index/#/?view=pubs&orgID=10141&catID=1&series

=-1&modID=449&tabID=131 Technical Manual 1-1-691

Cleaning and Corrosion Prevention and Control, Aerospace and Non-

Aerospace Equipment

11/2/2009 (Change 19:

07/22/2022) https://etims.cce.af.mil/ETIMS/ATOMS/catalog/todet ail.jsp

Technical Manual 1-1-8 Application and Removal of Organic

Coatings, Aerospace and Non- Aerospace Equipment

6/8/2022 https://etims.cce.af.mil/ETIMS/ATOMS/catalog/todet ail.jsp https://www.acquisition.gov/?q=browsefar http://www.acq.osd.mil/dpap/dars/dfarspgi/current/index.html http://www.acq.osd.mil/dpap/dars/dfarspgi/current/index.html https://www.acquisition.gov/dfars https://www.dhs.gov/homeland-security-presidential-directive-12 https://www.dhs.gov/homeland-security-presidential-directive-12 https://www.esd.whs.mil/Directives/issuances/dodm/

Technical Manual 35-1-3 Corrosion Prevention and Control, Cleaning, Painting, and Marking of

USAF Support Equipment (SE)

4/26/2014 (Change 20:

01/26/2022) https://etims.cce.af.mil/ETIMS/ATOMS/catalog/todet ail.jsp

Technical Manual 1-1A-15 General Maintenance Instructions for

Support Equipment (SE)

6/20/2018 (Rev 3

Change 4:

11/10/2022) https://etims.cce.af.mil/ETIMS/ATOMS/catalog/todet ail.jsp?to_num=1-1A-15

6.1 Applicable Forms: Forms applicable to the PWS are listed below:

Form Date Website

DD 441

Department of Defense Security Agreement

Feb 2020 http://www.dtic.mil/whs/directives/forms/dd/ddforms0001- 0499.htm

DD 250

Material Inspection and Receiving

Report

Aug 2000 https://www.esd.whs.mil/Directives/forms/dd0001_0499/

TECHNICAL EXHIBIT 1

Performance Requirements Summary (PRS)

This PRS includes performance objectives the Government will use to determine contractor performance and will compare contractor performance to the Acceptable Quality Level (AQL).

Performance

Objective Performance Standard Acceptable Quality

Levels (AQL) Surveillance Method / By

Whom

5.5 Transport

AGE

Equipment from Cape

Canaveral to Facility.

Contractor will transport AGE Equipment from

114EWS Facility to their Facility to complete AGE paint

Safe transportation of equipment

MSgt Cliffton Bryant or TSgt Thomas Krueger shall facilitate equipment pick up at

114EWS facility.

5.1 Corrosion

Control and Paint AGE Equipment

Contractor shall paint all equipment IAW Air Force

Paint Guidelines

Equipment Painted to Comply with Air Force Guidance.

Quality Control of equipment when it is returned to 114EWS after paint in completed

5.5 Transport

AGE

Equipment

Back to

114EWS

Contractor Will transport AGE Equipment back to 114EWS Facility after completion of painting.

Safe transportation of equipment

MSgt Cliffton Bryant or TSgt Thomas Krueger shall facilitate equipment drop off at

114EWS facility.

http://www.dtic.mil/whs/directives/forms/dd/ddforms0001-0499.htm http://www.dtic.mil/whs/directives/forms/dd/ddforms0001-0499.htm https://www.esd.whs.mil/Directives/forms/dd0001_0499/

1.4.5.1. Common Access Cards: Reserved