20Q5049 Q AND A DOC AS OF 20200918 LRS 4 POST LIFT.pdf

RFQ W50S6R20Q5049

LRS 4 POST LIFT / SURFACE MOUNT LIFT

QUESTIONS AND ANSWERS

CURRENT AS OF 18 SEP 2020

1. Q: Would a surface mount lift solution with mobile axle jacks be acceptable to meet requirement?

A: Yes, in accordance with the Purchase Description alternate equivalent document.

2. Q: Do you have a preferred voltage 208/440v 3-phase?

A: Building is 208v.

3. Q: Is there an existing service panel near the area where you’d like the lift to be placed?

A: There is no panel in the location of placement and will need wiring ran from a main panel that is approximately 125 feet away due to running up and over building/another area.

4. Q: How far away approximately is the panel in feet?

A: Approximately 125 feet.

5. Q: Is there an electrical drop from the ceiling that could be tied into?

A: No.

6. Q: Is there an existing lift that the proposed lift will replace?

A: This would be a new install and there is no existing lift at this location.

7. Q: Would 77,000 lbs. be an acceptable load capacity vs 78,000 listed on the attached specifications?

A: Yes. Anything over 60,000 lbs. would be acceptable load capacity.

8. Q: Our product has a standard approach ramp of 101 and ¼”, which can be customized to any length. Is the 77” approach ramp noted in the attached memorandum a requirement due to space confinements or would you prefer the standard 104 and ¼”?

A: We are limited in the length on of the concrete pad that the lift will be place on due to a wall to the west of the pad, and asphalt to the east of the pad.