PWS_RS595-8.pdf

10 August 2018

Performance Work Statement

Technical Support for the Development of an Engine Overhaul Manual.

1. Background: The Propulsion Technology Function (RDMR-WDP-P) of the Weapons

Development and Integration Directorate (WDI) requests the services of UAV Engines Limited (UEL), in Great Britain, to provide technical support for the development of the US Army UEL LOP-AR74-1102 Engine Overhaul Manual in Support of the U.S. Army PM Unmanned Aircraft Systems (UAS).

2. Performance Requirements: The contractor shall provide technical support for the development of the US Army UEL LOP-AR74-1102 Engine Overhaul Manual:

A. The contractor shall provide technical support in the form of answers questions that may arise during the development of the US Army LOP-AR74-1102 Engine Overhaul Manual. The questions may be submitted and answered through emails and by teleconferencing.

B. The contractor shall review and provide concurrence for the technical accuracy of the information within the draft US Army UEL LOP-AR74-1102 Engine Overhaul Manual.

C. The contractor shall provide On-Site Review of the final draft copy of the US Army UEL LOP- AR74-1102 Overhaul Manual. The location of the On-Site Review will be at Redstone Arsenal, Alabama.

3. Travel: OCONUS travel for the On-Site Review will be to Redstone Arsenal, Alabama. The

On-Site Review will take place over a maximum span of three (3) days.

4. Government Furnished Property: None.

5. Antiterrorism/Operations Security:

Access and General Protection / Security Policy and Procedures: All contractor employees, to include associated sub-contractors employees shall comply with applicable installation, facility and area Commander Installation and facility access and local security policies and procedures (provided by the Government representative). The contractor shall also provide all information required for background checks to meet installation access requirements to be accomplished by installation Provost Marshal Office, Director of Emergency Services or Security Office. The contractor workforce shall comply with all personal identity verification requirements as directed by DoD, Department of the Army Headquarters, and/or local policy. In addition to the changes otherwise authorized by the changes clause of this contract, should the Force Protection Condition at any individual facility or installation change, the Government may require changes in contractor security matters or processes. The prime contractor Human Resources/Security Officer is responsible for the collection of all Redstone Badges and CAC cards issued to their employees. The Human Resources/Security Officer will then turn over these credentials to the COR. This applies when the contract expires; as well as, when a contractor resigns or is terminated. After accounting for all badges/CACs, the COR will turn in the credentials at the One Stop Badging Office or CAC Office (MILPO). All contract employees, including

10 August 2018 subcontractor employees who are not in possession of the appropriate security clearance or access privileges, will be escorted in areas where they may be exposed to classified and/or sensitive materials and/or sensitive or restricted areas.

OPSEC SOP / PLAN REQUIREMENTS: The contractor shall comply with the AMRDEC OPSEC Plan.

OPSEC TRAINING: Level I OPSEC Awareness Training: Per AR 530-1, Operations Security, all contractor employees, to include subcontractor employees shall complete Level I OPSEC Awareness Training within 30 calendar days of their reporting for duty. All subcontractors shall take the Level 1 OPSEC Awareness Training located at the below website and print the certificates demonstrating completion. The contractor shall submit certificates of completion for each affected contractor employee and subcontractor employee, to the COR, within 10 calendar days after completion of training by all employees and subcontractor personnel. Note: after the first screen, select User Type: Civilian/Contractor, then Service: Army, then Grade N/A. OPSEC awareness training is available at the following website: http://cdsetrain.dtic.mil/opsec/

6. Contractor Manpower Reporting:

The contractor shall report ALL contractor labor hours (including subcontractor labor hours) required for performance of services provided under this contract for 3D Printer Repair and Calibration Services via a secure data collection site. The contractor is required to completely fill in all required data fields using the following web address: http://www.ecmra.mil/, and then click on “Department of the Army CMRA” or the icon of the DoD organization that is receiving or benefitting from the contracted services.

Reporting inputs will be for the labor executed during the period of performance during each Government fiscal year (FY), which runs October 1 through September 30. While inputs may be reported any time during the FY, all data shall be reported no later than October 31 of each calendar year, beginning with 2018. Contractors may direct questions to the help desk by clicking on “Send an email” which is located under the Help Resources ribbon on the right side of the login page of the applicable Service/Component’s CMR website.