W25G1V-19-R-0027__Attachment_3_-_Drawing_Package.pdf

PDF 19 MB Posted Jun 28, 2019

Attached to: CONSTRUCTION: Building Exterior Renovations at Tobyhanna Army Depot
Solicitation number: W25G1V19R0027
Issued by: Department of the Army Materiel Command Communications Electronics Command

About this file

From the source

Attachment 3 - Drawing Package

View the file

Other files

File	Type	Posted
W25G1V-19-R-0027__Attachment_5_-_Questions_and_Answers.pdf	PDF	Jul 16, 2019
W25G1V-19-R-0027_Amendment_0002.pdf	PDF	Jul 16, 2019
W25G1V-19-R-0027__Exhibit_1_-_Site_Visit_Attendance_Sheet.pdf	PDF	Jul 11, 2019
W25G1V-19-R-0027_Amendment_0001.pdf	PDF	Jul 11, 2019
W25G1V-19-R-0027__Attachment_4_-_Wage_Determination.pdf	PDF	Jun 28, 2019
W25G1V-19-R-0027__Attachment_1_-_Scope_of_Work.pdf	PDF	Jun 28, 2019
W25G1V-19-R-0027__Attachment_2_-_Construction_Specifications.pdf	PDF	Jun 28, 2019
W25G1V-19-R-0027.pdf	PDF	Jun 28, 2019

On GovTribe

Work with this file

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

AutoCAD SHX Text

EXTERIOR RENOVATIONS - PHASE 2

AutoCAD SHX Text

BUILDINGS 1A, 1B, 1C, 1D, 1E, AND 3

AutoCAD SHX Text 18466-5078

AutoCAD SHX Text

TOBYHANNA ARMY DEPOT

AutoCAD SHX Text

TOBYHANNA, PENNSYLVANIA

AutoCAD SHX Text

11 HAP ARNOLD BOULEVARD

AutoCAD SHX Text %%uGENERAL NOTES

AutoCAD SHX Text 1 - CONTRACTOR SHALL COMPLY WITH ALL LOCAL BUILDING CODE REGULATIONS AND U.S. DEPARTMENT OF LABOR STANDARDS 29CFR1926.

AutoCAD SHX Text 2 - CONTRACTORS SHALL VERIFY ALL DIMENSIONS AND CONDITIONS AT THE JOB SITE BEFORE COMMENCEMENT OF WORK, AND SHALL REPORT ALL

AutoCAD SHX Text ERRORS, OMISSIONS OR DISCREPANCIES TO THE GOVERNMENT CONTRACTING OFFICER (CO) IN WRITING PRIOR TO STARTING WORK.

AutoCAD SHX Text IN ALL CASES WHERE CONFLICTS MAY OCCUR, SUCH AS BETWEEN ITEMS INCLUDED IN THE SPECIFICATIONS AND NOTES ON THE DRAWING, THE

AutoCAD SHX Text GOVERNMENT CONTRACTING OFFICER (CO) SHALL BE NOTIFIED AND WILL INTERPRET THE INTENT OF THE CONTRACT DOCUMENTS.

AutoCAD SHX Text 3 - DRAWING REFERENCES ARE FOR CONVENIENCE ONLY AND DO NOT LIMIT THE APPLICATION OF THE DRAWING OR DETAIL.

AutoCAD SHX Text 4 - ALL DIMENSIONS SHALL TAKE PRECEDENCE OVER SCALE. DIMENSIONS ARE GIVEN TO FACE OF CONCRETE, TO CENTERLINE OF COLUMNS, TO EXTERIOR

AutoCAD SHX Text 5 - THE DRAWINGS MUST BE READ IN CONJUNCTION WITH THE TECHNICAL SPECIFICATIONS WHICH FORM A PART OF THE CONTRACT DOCUMENTS AND MAY

AutoCAD SHX Text 6 - THE ORIGINAL DRAWING SIZE IS 30"x42".

AutoCAD SHX Text FACE OF MASONRY AT EXTERIOR WALLS AND CENTERLINE OF INTERIOR STUD PARTITIONS UNLESS NOTED OTHERWISE.

AutoCAD SHX Text

CONTAIN ADDITIONAL REQUIREMENTS AND INFORMATION NOT SHOWN ON THE DRAWINGS.

AutoCAD SHX Text %%uVICINITY MAP

AutoCAD SHX Text

SCALE: NONE

AutoCAD SHX Text

HAVEN

AutoCAD SHX Text

WHITE

AutoCAD SHX Text

WILKES BARRE

AutoCAD SHX Text

TO SCRANTON

AutoCAD SHX Text

TOBYHANNA

AutoCAD SHX Text

%%UPROJECT

AutoCAD SHX Text

%%USITE

AutoCAD SHX Text

ABE

AutoCAD SHX Text

STROUDSBURG

AutoCAD SHX Text

EAST

AutoCAD SHX Text

AutoCAD SHX Text E

AutoCAD SHX Text N

AutoCAD SHX Text W

AutoCAD SHX Text S

AutoCAD SHX Text

CS-1

AutoCAD SHX Text

COVER SHEET

AutoCAD SHX Text 1A-1-510

AutoCAD SHX Text A-1

AutoCAD SHX Text 1A-1-512

AutoCAD SHX Text A-2

AutoCAD SHX Text 1A-1-513

AutoCAD SHX Text

ARCHITECTURAL

AutoCAD SHX Text A-3

AutoCAD SHX Text 1B-1-260

AutoCAD SHX Text A-4

AutoCAD SHX Text 1B-1-261

AutoCAD SHX Text A-5

AutoCAD SHX Text 1B-1-262

AutoCAD SHX Text A-6

AutoCAD SHX Text 1B-1-263

AutoCAD SHX Text A-7

AutoCAD SHX Text 1C-1-228

AutoCAD SHX Text A-8

AutoCAD SHX Text 1C-1-229

AutoCAD SHX Text M Y E R S T R E E T

AutoCAD SHX Text 1C

AutoCAD SHX Text 10B

AutoCAD SHX Text 10C

AutoCAD SHX Text 10A

AutoCAD SHX Text

AutoCAD SHX Text 1A

AutoCAD SHX Text 1B

AutoCAD SHX Text

AutoCAD SHX Text 1E

AutoCAD SHX Text

IFO

AutoCAD SHX Text

AutoCAD SHX Text 14A

AutoCAD SHX Text

AutoCAD SHX Text 15B

AutoCAD SHX Text

AutoCAD SHX Text 15A

AutoCAD SHX Text

AutoCAD SHX Text 72A

AutoCAD SHX Text P E R I M E T E R R O A D

AutoCAD SHX Text

HELIPAD

AutoCAD SHX Text

AutoCAD SHX Text S Q U I E R

AutoCAD SHX Text S T R E E T

AutoCAD SHX Text

AutoCAD SHX Text H A P A R N O L D B L V D

AutoCAD SHX Text

AutoCAD SHX Text %%uSITE LOCATION KEY PLAN

AutoCAD SHX Text

SCALE: NONE

AutoCAD SHX Text E

AutoCAD SHX Text N

AutoCAD SHX Text W

AutoCAD SHX Text S

AutoCAD SHX Text

PROJECT

AutoCAD SHX Text

NORTH

AutoCAD SHX Text

TOBYHANNA, PENNSYLVANIA

AutoCAD SHX Text

DIRECTORATE OF PUBLIC WORKS

AutoCAD SHX Text

TOBYHANNA ARMY DEPOT

AutoCAD SHX Text

REVISION

AutoCAD SHX Text

APPROVAL

AutoCAD SHX Text

DATE

AutoCAD SHX Text

DESCRIPTION

AutoCAD SHX Text

SYMBOL

AutoCAD SHX Text

CHIEF FACILITIES MAINT. DIV.

AutoCAD SHX Text

CHIEF UTILITIES & GRNDS. DIV.

AutoCAD SHX Text

TYAD DRAFTSPERSON

AutoCAD SHX Text

CHIEF FIRE & EMER. SVCS.

AutoCAD SHX Text

CHIEF SECURITY DIV.

AutoCAD SHX Text

CHIEF SAFETY DIV.

AutoCAD SHX Text

CHIEF ENV. MGMT. DIV.

AutoCAD SHX Text

TYAD PROJECT MANAGER

AutoCAD SHX Text

DRAWING NO.

AutoCAD SHX Text

PROJECT NO.

AutoCAD SHX Text

SHEET NO.

AutoCAD SHX Text

SCALE

AutoCAD SHX Text

DATE

AutoCAD SHX Text

APPROVED

AutoCAD SHX Text

CHECKED

AutoCAD SHX Text

CHECKED

AutoCAD SHX Text

DRAWN

AutoCAD SHX Text

CHECKED

AutoCAD SHX Text

CHECKED

AutoCAD SHX Text

CHECKED

AutoCAD SHX Text

CHECKED

AutoCAD SHX Text

CHECKED

AutoCAD SHX Text

CHECKED

AutoCAD SHX Text

15MAR2019

AutoCAD SHX Text

NONE

AutoCAD SHX Text

CS-1

AutoCAD SHX Text

AutoCAD SHX Text X

AutoCAD SHX Text 1A-1-510

AutoCAD SHX Text

PLOT DATE:

AutoCAD SHX Text

OPERATING ACTIVITY

AutoCAD SHX Text

PA. ONE CALL REGISTRATION NO.

AutoCAD SHX Text

APPROVED

AutoCAD SHX Text

A/E PROJECT MANAGER

AutoCAD SHX Text

DRAWN

AutoCAD SHX Text

A/E DRAFTSPERSON

AutoCAD SHX Text

PLOT SCALE:

AutoCAD SHX Text 1:1

AutoCAD SHX Text

COR:

AutoCAD SHX Text

J. SECOOLISH

AutoCAD SHX Text

APPROVED

AutoCAD SHX Text

CHIEF ENGINEERING DIV.

AutoCAD SHX Text

COLONEL COMMANDER

AutoCAD SHX Text S.G./L.B.A.

AutoCAD SHX Text D.M./D.I./L.F.

AutoCAD SHX Text

EXTERIOR RENOVATIONS

AutoCAD SHX Text

COVER SHEET

AutoCAD SHX Text

AutoCAD SHX Text A

AutoCAD SHX Text B

AutoCAD SHX Text C

AutoCAD SHX Text D

AutoCAD SHX Text E

AutoCAD SHX Text F

AutoCAD SHX Text G

AutoCAD SHX Text H

AutoCAD SHX Text I

AutoCAD SHX Text A

AutoCAD SHX Text B

AutoCAD SHX Text C

AutoCAD SHX Text D

AutoCAD SHX Text E

AutoCAD SHX Text F

AutoCAD SHX Text G

AutoCAD SHX Text H

AutoCAD SHX Text I

AutoCAD SHX Text

SHEET SEQUENCE

AutoCAD SHX Text

BUILDING

AutoCAD SHX Text

IDENTIFIER

AutoCAD SHX Text

NUMBER

AutoCAD SHX Text

DISCIPLINE

AutoCAD SHX Text

CODE

AutoCAD SHX Text

%%UDRAWING NUMBERING METHODOLOGY

AutoCAD SHX Text

(BUILDINGS 2, 4, 4A, 5, 6, 7, 11 AND 30 - PHASE 1)

AutoCAD SHX Text 1D

AutoCAD SHX Text 4A

AutoCAD SHX Text

J. SECOOLISH

AutoCAD SHX Text

EXTERIOR ELEVATIONS BUILDING 1B

AutoCAD SHX Text

EXTERIOR ELEVATIONS BUILDING 1C

AutoCAD SHX Text

EXTERIOR ELEVATIONS BUILDING 1D & 4A

AutoCAD SHX Text

EXTERIOR ELEVATIONS BUILDING 1E

AutoCAD SHX Text

EXTERIOR ELEVATIONS BUILDING 3

AutoCAD SHX Text A-9

AutoCAD SHX Text 1D-1-14

AutoCAD SHX Text A-10

AutoCAD SHX Text 1E-1-8

AutoCAD SHX Text A-11

AutoCAD SHX Text 1E-1-9

AutoCAD SHX Text A-16

AutoCAD SHX Text 3-1-119

AutoCAD SHX Text A-17

AutoCAD SHX Text A-18

AutoCAD SHX Text A-19

AutoCAD SHX Text

CONSTRUCTION DETAILS

AutoCAD SHX Text

CONSTRUCTION DETAILS

AutoCAD SHX Text

DRAWING NUMBER

AutoCAD SHX Text

SHEET NUMBER

AutoCAD SHX Text

TITLE

AutoCAD SHX Text

INDEX OF DRAWINGS

AutoCAD SHX Text

GENERAL

AutoCAD SHX Text G-1

AutoCAD SHX Text

GENERAL NOTES, ABBREVIATIONS, SYMBOLS AND LEGEND

AutoCAD SHX Text 1A-1-511

AutoCAD SHX Text

EXTERIOR ELEVATIONS BUILDING 1B

AutoCAD SHX Text

EXTERIOR ELEVATIONS BUILDING 1B

AutoCAD SHX Text

EXTERIOR ELEVATIONS BUILDING 1B

AutoCAD SHX Text

EXTERIOR ELEVATIONS BUILDING 1C

AutoCAD SHX Text

EXTERIOR ELEVATIONS BUILDING 1E

AutoCAD SHX Text

EXTERIOR ELEVATIONS BUILDING 3

AutoCAD SHX Text

EXTERIOR ELEVATIONS BUILDING 3

AutoCAD SHX Text

EXTERIOR ELEVATIONS BUILDING 3

AutoCAD SHX Text

CONSTRUCTION DETAILS

AutoCAD SHX Text A-40

AutoCAD SHX Text

EXTERIOR ELEVATIONS BUILDING 1A

AutoCAD SHX Text

EXTERIOR ELEVATIONS BUILDING 1A

AutoCAD SHX Text 3-1-120

AutoCAD SHX Text 3-1-121

AutoCAD SHX Text 3-1-122

AutoCAD SHX Text 1A-1-514

AutoCAD SHX Text A-41

AutoCAD SHX Text 1A-1-515

AutoCAD SHX Text A-42

AutoCAD SHX Text 1A-1-516

AutoCAD SHX Text

RAMP CANOPY PLANS AND ELEVATIONS

AutoCAD SHX Text A-45B

AutoCAD SHX Text 1A-1-519B

AutoCAD SHX Text

CANOPY DETAILS & NOTES

AutoCAD SHX Text A-47

AutoCAD SHX Text 1A-1-521

AutoCAD SHX Text

SHADED AREAS DENOTE PROJECT SITE

AutoCAD SHX Text

SP-1

AutoCAD SHX Text

OVERALL SITE LOCATION PLAN

AutoCAD SHX Text 1A-1-511A

AutoCAD SHX Text

BUILDINGS 1B & 1C CANOPY ADDITION DRAWINGS

AutoCAD SHX Text

CS-1

AutoCAD SHX Text 1B-1-140

AutoCAD SHX Text

BUILDING 3 CANOPY ADDITION DRAWINGS

AutoCAD SHX Text

CS-1

AutoCAD SHX Text 2-1-67

PHASE 2

AutoCAD SHX Text

TOBYHANNA, PENNSYLVANIA

AutoCAD SHX Text

DIRECTORATE OF PUBLIC WORKS

AutoCAD SHX Text

TOBYHANNA ARMY DEPOT

AutoCAD SHX Text

REVISION

AutoCAD SHX Text

APPROVAL

AutoCAD SHX Text

DATE

AutoCAD SHX Text

DESCRIPTION

AutoCAD SHX Text

SYMBOL

AutoCAD SHX Text

CHIEF FACILITIES MAINT. DIV.

AutoCAD SHX Text

CHIEF UTILITIES & GRNDS. DIV.

AutoCAD SHX Text

TYAD DRAFTSPERSON

AutoCAD SHX Text

CHIEF FIRE & EMER. SVCS.

AutoCAD SHX Text

CHIEF SECURITY DIV.

AutoCAD SHX Text

CHIEF SAFETY DIV.

AutoCAD SHX Text

CHIEF ENV. MGMT. DIV.

AutoCAD SHX Text

TYAD PROJECT MANAGER

AutoCAD SHX Text

DRAWING NO.

AutoCAD SHX Text

PROJECT NO.

AutoCAD SHX Text

SHEET NO.

AutoCAD SHX Text

SCALE

AutoCAD SHX Text

DATE

AutoCAD SHX Text

APPROVED

AutoCAD SHX Text

CHECKED

AutoCAD SHX Text

CHECKED

AutoCAD SHX Text

DRAWN

AutoCAD SHX Text

CHECKED

AutoCAD SHX Text

CHECKED

AutoCAD SHX Text

CHECKED

AutoCAD SHX Text

CHECKED

AutoCAD SHX Text

CHECKED

AutoCAD SHX Text

CHECKED

AutoCAD SHX Text

21MAR2019

AutoCAD SHX Text

AS NOTED

AutoCAD SHX Text G-1

AutoCAD SHX Text

AutoCAD SHX Text X

AutoCAD SHX Text 1A-1-511

AutoCAD SHX Text

PLOT DATE:

AutoCAD SHX Text

OPERATING ACTIVITY

AutoCAD SHX Text

PA. ONE CALL REGISTRATION NO.

AutoCAD SHX Text

APPROVED

AutoCAD SHX Text

A/E PROJECT MANAGER

AutoCAD SHX Text

DRAWN

AutoCAD SHX Text

A/E DRAFTSPERSON

AutoCAD SHX Text

PLOT SCALE:

AutoCAD SHX Text 1:1

AutoCAD SHX Text

COR:

AutoCAD SHX Text

J. SECOOLISH

AutoCAD SHX Text

APPROVED

AutoCAD SHX Text

CHIEF ENGINEERING DIV.

AutoCAD SHX Text

COLONEL COMMANDER

AutoCAD SHX Text

AutoCAD SHX Text A

AutoCAD SHX Text B

AutoCAD SHX Text C

AutoCAD SHX Text D

AutoCAD SHX Text E

AutoCAD SHX Text F

AutoCAD SHX Text G

AutoCAD SHX Text H

AutoCAD SHX Text I

AutoCAD SHX Text A

AutoCAD SHX Text B

AutoCAD SHX Text C

AutoCAD SHX Text D

AutoCAD SHX Text E

AutoCAD SHX Text F

AutoCAD SHX Text G

AutoCAD SHX Text H

AutoCAD SHX Text I

AutoCAD SHX Text

AutoCAD SHX Text S.G./L.B.A.

AutoCAD SHX Text D.M./D.I./L.F.

AutoCAD SHX Text

J. SECOOLISH

AutoCAD SHX Text

EXTERIOR RENOVATIONS

AutoCAD SHX Text

GENERAL NOTES, ABBREVIATIONS,

AutoCAD SHX Text

SYMBOLS AND LEGEND

AutoCAD SHX Text

PSF

AutoCAD SHX Text

POUNDS PER SQUARE FOOT

AutoCAD SHX Text

CORR

AutoCAD SHX Text

CORRUGATED

AutoCAD SHX Text

POLYVINYL CHLORIDE

AutoCAD SHX Text

POUNDS PER SQUARE INCH

AutoCAD SHX Text REVISION or REVISED

AutoCAD SHX Text

RAIN WATER CONDUCTOR

AutoCAD SHX Text

RUBBER WALL BASE

AutoCAD SHX Text

ROUGH OPENING

AutoCAD SHX Text

REFLECTED CEILING PLAN

AutoCAD SHX Text

TONGUE AND GROOVE

AutoCAD SHX Text

STAINLESS STEEL

AutoCAD SHX Text

RUBBER COVE BASE

AutoCAD SHX Text

UNLESS NOTED OTHERWISE

AutoCAD SHX Text

VINYL WALL BASE

AutoCAD SHX Text

VINYL COMPOSITION TILE

AutoCAD SHX Text

VINYL COVE BASE

AutoCAD SHX Text

VINYL WALL COVERING

AutoCAD SHX Text

TOP OF FOOTING

AutoCAD SHX Text

WORKING POINT

AutoCAD SHX Text

WELDED WIRE FABRIC

AutoCAD SHX Text

THICK (THICKNESS)

AutoCAD SHX Text

STRUCT

AutoCAD SHX Text

STRUCTURAL

AutoCAD SHX Text

FEC

AutoCAD SHX Text

FIRE EXTINGUISHER CABINET

AutoCAD SHX Text

HEATING/VENTILATION/AIR CONDITIONING

AutoCAD SHX Text

HOLLOW CORE

AutoCAD SHX Text

INFO

AutoCAD SHX Text

INCL

AutoCAD SHX Text

HWH

AutoCAD SHX Text

HVAC

AutoCAD SHX Text

HORIZ

AutoCAD SHX Text

HDCP

AutoCAD SHX Text

HDW

AutoCAD SHX Text

INCH, INCHES

AutoCAD SHX Text

INFORMATION

AutoCAD SHX Text

INSIDE DIAMETER

AutoCAD SHX Text

HOT WATER HEATER

AutoCAD SHX Text

INCLUDED

AutoCAD SHX Text

HORIZONTAL

AutoCAD SHX Text

HARDWARE

AutoCAD SHX Text

HIGH POINT

AutoCAD SHX Text

HOLLOW METAL

AutoCAD SHX Text

HANDICAP

AutoCAD SHX Text

HEIGHT

AutoCAD SHX Text

HOUR

AutoCAD SHX Text

GPM

AutoCAD SHX Text

GYP

AutoCAD SHX Text

GAL

AutoCAD SHX Text

FND

AutoCAD SHX Text

FTG

AutoCAD SHX Text

FIN

AutoCAD SHX Text

GALLONS PER MINUTE

AutoCAD SHX Text

GRAB BAR

AutoCAD SHX Text

GENERAL CONTRACTOR

AutoCAD SHX Text

GYPSUM

AutoCAD SHX Text

GLASS

AutoCAD SHX Text

GALLON

AutoCAD SHX Text

GAUGE

AutoCAD SHX Text

FINISH FLOOR

AutoCAD SHX Text

FOUNDATION

AutoCAD SHX Text

FOOT

AutoCAD SHX Text

FLOOR

AutoCAD SHX Text

FINISH

AutoCAD SHX Text

FRAME

AutoCAD SHX Text

FOOTING

AutoCAD SHX Text

TYP

AutoCAD SHX Text

TYPICAL

AutoCAD SHX Text

VERT

AutoCAD SHX Text

VWC

AutoCAD SHX Text

VWB

AutoCAD SHX Text W

AutoCAD SHX Text

UNO

AutoCAD SHX Text

VCT

AutoCAD SHX Text

VCB

AutoCAD SHX Text

WPT

AutoCAD SHX Text

WWF

AutoCAD SHX Text

AutoCAD SHX Text W/O

AutoCAD SHX Text

AutoCAD SHX Text W/

AutoCAD SHX Text

YARD

AutoCAD SHX Text

WITHOUT

AutoCAD SHX Text

WOOD

AutoCAD SHX Text

WITH

AutoCAD SHX Text

VERTICAL

AutoCAD SHX Text

WEST

AutoCAD SHX Text

TEL

AutoCAD SHX Text T&G

AutoCAD SHX Text

SYM

AutoCAD SHX Text

SUSP

AutoCAD SHX Text

TWP

AutoCAD SHX Text

TOW.

AutoCAD SHX Text

THRU

AutoCAD SHX Text

TOS

AutoCAD SHX Text

TOF

AutoCAD SHX Text

THK

AutoCAD SHX Text T

AutoCAD SHX Text

TOWNSHIP

AutoCAD SHX Text

TOP OF WALL

AutoCAD SHX Text

TELEVISION

AutoCAD SHX Text

THROUGH

AutoCAD SHX Text

TOP OF STEEL

AutoCAD SHX Text

TELEPHONE

AutoCAD SHX Text

SQUARE YARD

AutoCAD SHX Text

SYMMETRICAL

AutoCAD SHX Text

SUSPENDED

AutoCAD SHX Text

TACKBOARD

AutoCAD SHX Text

TREAD

AutoCAD SHX Text

ELECTRIC WATER COOLER

AutoCAD SHX Text

EXTERIOR INSULATION FINISH SYSTEM

AutoCAD SHX Text

EACH

AutoCAD SHX Text

EXT

AutoCAD SHX Text

EWC

AutoCAD SHX Text

EXP

AutoCAD SHX Text

EST

AutoCAD SHX Text

EQUIP

AutoCAD SHX Text

ELEV

AutoCAD SHX Text

ELEC

AutoCAD SHX Text

EIFS

AutoCAD SHX Text

FIRE EXTINGUISHER

AutoCAD SHX Text

FLOOR DRAIN

AutoCAD SHX Text

EXPANSION

AutoCAD SHX Text

EXTERIOR

AutoCAD SHX Text

EXISTING

AutoCAD SHX Text

ESTIMATE

AutoCAD SHX Text

EQUIPMENT

AutoCAD SHX Text

ELECTRICAL

AutoCAD SHX Text

EXPANSION JOINT

AutoCAD SHX Text

EQUAL

AutoCAD SHX Text

ELEVATION

AutoCAD SHX Text

ELEVATOR

AutoCAD SHX Text

AutoCAD SHX Text E

AutoCAD SHX Text

DWG

AutoCAD SHX Text

DIM.

AutoCAD SHX Text

DIAG

AutoCAD SHX Text

DET

AutoCAD SHX Text

DIA

AutoCAD SHX Text

DEPT

AutoCAD SHX Text

DEMO

AutoCAD SHX Text

DOWNSPOUT

AutoCAD SHX Text

DRAWING

AutoCAD SHX Text

EAST

AutoCAD SHX Text

DOWN

AutoCAD SHX Text

DOOR

AutoCAD SHX Text

DIMENSION

AutoCAD SHX Text

DIAGONAL

AutoCAD SHX Text

DEPARTMENT

AutoCAD SHX Text

CUBIC YARD

AutoCAD SHX Text

DRINKING FOUNTAIN

AutoCAD SHX Text

CERAMIC TILE

AutoCAD SHX Text

DIAMETER

AutoCAD SHX Text

DETAIL

AutoCAD SHX Text

DEMOLISH

AutoCAD SHX Text

SECT

AutoCAD SHX Text

SCH

AutoCAD SHX Text

RWC

AutoCAD SHX Text

RWB

AutoCAD SHX Text

STD

AutoCAD SHX Text

STOR

AutoCAD SHX Text

STL

AutoCAD SHX Text

SPEC

AutoCAD SHX Text

SIM

AutoCAD SHX Text S

AutoCAD SHX Text

STANDARD

AutoCAD SHX Text

STEEL

AutoCAD SHX Text

STORAGE

AutoCAD SHX Text

SQUARE

AutoCAD SHX Text

SPECIFICATION

AutoCAD SHX Text

SIMILAR

AutoCAD SHX Text

SQUARE FOOT

AutoCAD SHX Text

SECTION

AutoCAD SHX Text

SCHEDULE

AutoCAD SHX Text

SOLID CORE

AutoCAD SHX Text

SOUTH

AutoCAD SHX Text

QTY

AutoCAD SHX Text

RAD

AutoCAD SHX Text

PVC

AutoCAD SHX Text

PSI

AutoCAD SHX Text

PTD

AutoCAD SHX Text

REQD

AutoCAD SHX Text

REV

AutoCAD SHX Text

REINF

AutoCAD SHX Text

RCP

AutoCAD SHX Text

RCB

AutoCAD SHX Text

REQUIRED

AutoCAD SHX Text

ROOM

AutoCAD SHX Text

REINFORCED

AutoCAD SHX Text

ROOF DRAIN

AutoCAD SHX Text

QUANTITY

AutoCAD SHX Text

PAINTED

AutoCAD SHX Text

RISER

AutoCAD SHX Text

RADIUS

AutoCAD SHX Text

QUARRY TILE

AutoCAD SHX Text

MISCELLANEOUS

AutoCAD SHX Text

MANUFACTURER

AutoCAD SHX Text (TYPICAL OFFICE ARCHITECTURAL ABBREVIATIONS - MAY NOT BE APPLICABLE TO ALL DRAWINGS)

AutoCAD SHX Text

NOT APPLICABLE

AutoCAD SHX Text

OUTSIDE DIAMETER

AutoCAD SHX Text

NOT IN CONTRACT

AutoCAD SHX Text

PREFABRICATED

AutoCAD SHX Text

POUNDS PER CUBIC FOOT

AutoCAD SHX Text

PLASTIC LAMINATE

AutoCAD SHX Text

MASONRY OPENING

AutoCAD SHX Text

LOW POINT

AutoCAD SHX Text

ALT

AutoCAD SHX Text

ALTERNATE

AutoCAD SHX Text

ARCHITECT/ARCHITECTURAL

AutoCAD SHX Text

CUBIC FEET PER SECOND

AutoCAD SHX Text

CUBIC FEET PER MINUTE

AutoCAD SHX Text

CONCRETE MASONRY UNIT

AutoCAD SHX Text

CUBIC FOOT

AutoCAD SHX Text

CONTR

AutoCAD SHX Text

CORP

AutoCAD SHX Text

CONT

AutoCAD SHX Text

CONST

AutoCAD SHX Text

CONC

AutoCAD SHX Text

COL

AutoCAD SHX Text

CMU

AutoCAD SHX Text

CLG HT

AutoCAD SHX Text

CLR

AutoCAD SHX Text

CFM

AutoCAD SHX Text

CFS

AutoCAD SHX Text

CLG

AutoCAD SHX Text

CONTRACTOR

AutoCAD SHX Text

CORPORATION

AutoCAD SHX Text

CONTINUOUS

AutoCAD SHX Text

CONSTRUCTION

AutoCAD SHX Text

CONCRETE

AutoCAD SHX Text

COLUMN

AutoCAD SHX Text

CAST IRON

AutoCAD SHX Text

CONTROL JOINT

AutoCAD SHX Text

CEILING HEIGHT

AutoCAD SHX Text

CLEAR

AutoCAD SHX Text

CEILING

AutoCAD SHX Text L

AutoCAD SHX Text C

AutoCAD SHX Text

BSMT

AutoCAD SHX Text

BOT

AutoCAD SHX Text

BLKG

AutoCAD SHX Text

BLDG

AutoCAD SHX Text

BIT

AutoCAD SHX Text

AVG

AutoCAD SHX Text

ARCH

AutoCAD SHX Text

APPROX

AutoCAD SHX Text

APP

AutoCAD SHX Text

ALUM

AutoCAD SHX Text

CENTERLINE

AutoCAD SHX Text

CHALKBOARD

AutoCAD SHX Text

BASEMENT

AutoCAD SHX Text

BENCHMARK

AutoCAD SHX Text

BOTTOM

AutoCAD SHX Text

BLOCKING

AutoCAD SHX Text

BUILDING

AutoCAD SHX Text

BITUMINOUS

AutoCAD SHX Text

APPROXIMATE

AutoCAD SHX Text

APPLICABLE

AutoCAD SHX Text

BOARD

AutoCAD SHX Text

AVERAGE

AutoCAD SHX Text

ALUMINUM

AutoCAD SHX Text

NUMBER

AutoCAD SHX Text

OPNG

AutoCAD SHX Text

OPP

AutoCAD SHX Text

NTS

AutoCAD SHX Text

NOM

AutoCAD SHX Text

PREFAB

AutoCAD SHX Text

PCF

AutoCAD SHX Text

PLAS LAM

AutoCAD SHX Text

ORIG

AutoCAD SHX Text

PAIR

AutoCAD SHX Text

PLATE

AutoCAD SHX Text

PRECAST

AutoCAD SHX Text

ORIGINAL

AutoCAD SHX Text

OPENING

AutoCAD SHX Text

ON CENTER

AutoCAD SHX Text

NOT TO SCALE

AutoCAD SHX Text

NOMINAL

AutoCAD SHX Text

OPPOSITE

AutoCAD SHX Text

OVERHEAD

AutoCAD SHX Text

MIN

AutoCAD SHX Text

MISC

AutoCAD SHX Text

MFR

AutoCAD SHX Text

MECH

AutoCAD SHX Text

MAX

AutoCAD SHX Text

MAT

AutoCAD SHX Text

MAS

AutoCAD SHX Text N/A

AutoCAD SHX Text

NIC

AutoCAD SHX Text

MTL

AutoCAD SHX Text

MTD

AutoCAD SHX Text

MOV

AutoCAD SHX Text

AutoCAD SHX Text N

AutoCAD SHX Text

MOUNTED

AutoCAD SHX Text

MOVABLE

AutoCAD SHX Text

NORTH

AutoCAD SHX Text

METAL

AutoCAD SHX Text

MINIMUM

AutoCAD SHX Text

MECHANICAL

AutoCAD SHX Text

MAXIMUM

AutoCAD SHX Text

MASONRY

AutoCAD SHX Text

MATERIAL

AutoCAD SHX Text

ACOUSTICAL CEILING TILE

AutoCAD SHX Text

AFF

AutoCAD SHX Text

ADD

AutoCAD SHX Text

ADJUST

AutoCAD SHX Text

ACT

AutoCAD SHX Text

ACOUS

AutoCAD SHX Text

ADJ

AutoCAD SHX Text A/C

AutoCAD SHX Text

ABOVE FINISHED FLOOR

AutoCAD SHX Text

ADDENDUM

AutoCAD SHX Text

ACOUSTICAL

AutoCAD SHX Text

ADJUSTABLE

AutoCAD SHX Text

AIR CONDITIONING

AutoCAD SHX Text

ADJACENT

AutoCAD SHX Text

ANCHOR BOLT

AutoCAD SHX Text

INSUL

AutoCAD SHX Text

LBS

AutoCAD SHX Text

LAV

AutoCAD SHX Text

LAB

AutoCAD SHX Text

KIT

AutoCAD SHX Text

INT

AutoCAD SHX Text

LINEAR FEET

AutoCAD SHX Text

POUNDS

AutoCAD SHX Text

JOINT

AutoCAD SHX Text

KITCHEN

AutoCAD SHX Text

LABORATORY

AutoCAD SHX Text

LAVATORY

AutoCAD SHX Text

INTERIOR

AutoCAD SHX Text

INSULATION

AutoCAD SHX Text

AutoCAD SHX Text R

AutoCAD SHX Text

%%UARCHITECTURAL ABBREVIATIONS

AutoCAD SHX Text

WATER INFILTRATION PROBLEMS ON EXISTING EXTERIOR ELEVATIONS (SEE NOTE BELOW):

AutoCAD SHX Text

BUILDING 1B

AutoCAD SHX Text

BUILDING 1A

AutoCAD SHX Text

SCOPE OF WORK

AutoCAD SHX Text

%%UPROJECT SCOPE OF WORK

AutoCAD SHX Text

RUST ISSUES ON EXISTING EXTERIOR ELEVATIONS (SEE NOTE BELOW):

AutoCAD SHX Text

BUILDING 1C

AutoCAD SHX Text

BUILDING 1D

AutoCAD SHX Text

BUILDING 1E

AutoCAD SHX Text

BUILDING 3

AutoCAD SHX Text AREAS WHERE EXISTING STUCCO AND/OR EIFS HAS DELAMINATED FROM WALL (SEE NOTE BELOW):

AutoCAD SHX Text BASIS OF DESIGN DOCUMENTS ILLUSTRATING CONCEPTUAL ELEVATIONS AND DETAILS OUTLINING THE LIMITS OF WORK ASSOCIATED WITH EACH BUILDING

AutoCAD SHX Text ADD 4" OF NEW EIFS OVER EXTERIOR FACADES WITH EXISTING STUCCO FINISH, PREP SURFACES PER EIFS MANFACTURER'S RECOMMENDATIONS

AutoCAD SHX Text

TYPICAL NEW ROOF EDGE DETAILS AT NEW EIFS WITHOUT GUTTERS

AutoCAD SHX Text ADD 4" OF NEW EIFS OVER EXTERIOR FACADES WITH EXISTING PAINTED CMU FINISH, PREP SURFACES PER EIFS MANFACTURER'S RECOMMENDATIONS

AutoCAD SHX Text ADD NEW EIFS OVER EXTERIOR FACADES WITH EXISTING EIFS (THICKNESS OF NEW EIFS VARIES BASE ON THICKNESS OF EXISTING EIFS, OVERALL THICKNESS OF

AutoCAD SHX Text

EIFS TO BE 4"), PREP SURFACES PER EIFS MANFACTURER'S RECOMMENDATIONS

AutoCAD SHX Text ADD 4" OF NEW EIFS OVER EXISTING PAINTED FOUNDATIONS, PREP SURFACES PER EIFS MANFACTURER'S RECOMMENDATIONS

AutoCAD SHX Text ADD 4" OF NEW EIFS OVER EXTERIOR FACADES WITH UN-INSULATED METAL PANEL SYSTEM, PREP SURFACES PER EIFS MANFACTURER'S RECOMMENDATIONS

AutoCAD SHX Text NEW EIFS AT IMPACT AREAS INCLUDING LOADING DOCKS, AREAS ADJACENT TO PARKING AREAS AT GRADE ARE TO BE CONSTRUCTED WITH ULTRA HIGH IMPACT

AutoCAD SHX Text INSTALL CLOSED CELL POLYURETHANE FOAM INSULATION OVER FLUID APPLIED AIR/MOISTURE BARRIER ON FACE OF EXTERIOR WALL WITHIN THE TRUSS SPACE OF

AutoCAD SHX Text

TYPICAL EDGE DETAILS AT EXISTING METAL ROOF CANOPIES

AutoCAD SHX Text

TYPICAL DETAILS FOR REMOVING EXISTING OVERHEAD GARAGE DOORS

AutoCAD SHX Text

TYPICAL DETAILS FOR REMOVING EXISTING MAN DOORS

AutoCAD SHX Text

TYPICAL DETAILS AT EXISTING OVERHEAD GARAGE DOORS TO REMAIN

AutoCAD SHX Text

TYPICAL DETAILS AT EXISTING MAN DOORS TO REMAIN

AutoCAD SHX Text TYPICAL DETAILS FOR ADDING A NEW OVERHEAD GARAGE DOORS, INCLUDING INTERIOR/EXTERIOR LIGHTING, ELECTRICAL WORK FOR OPERATOR

AutoCAD SHX Text TYPICAL DETAILS FOR ADDING A NEW MAN DOORS, INCLUDING INTERIOR/EXTERIOR LIGHTING, DOOR HARDWARE AND CONCRETE STEPS, RAILINGS AND

AutoCAD SHX Text

TYPICAL DETAILS AT EXISTING ALUMINUM WINDOWS TO REMAIN

AutoCAD SHX Text

WHERE APPLICABLE

AutoCAD SHX Text

TYPICAL DETAILS FOR ADDING A NEW ALUMINUM WINDOW

AutoCAD SHX Text

TYPICAL DETAILS FOR REMOVING AN EXISTING ALUMINUM WINDOW

AutoCAD SHX Text UNHEATED BUILDING ADDITIONS - CONFIRM WITH TYAD PLANNING ARCHITECT - WHICH WALLS ARE TO RECEIVE NEW EIFS

AutoCAD SHX Text TYPICAL DETAILS AT ALL EXISTING APPURTENANCES TO REMAIN ON EXISTING EXTERIOR WALL SURFACE

AutoCAD SHX Text TYPICAL DETAILS AT ALL EXISTING APPURTENANCES TO BE REMOVED AND REINSTALLED AT NEW EIFS FINISHED SURFACE

AutoCAD SHX Text

INCLUDING BUT NOT LIMITED TO:

AutoCAD SHX Text WALL MOUNTED LIGHT FIXTURES, ELECTRICAL CONDUITS, DISCONNECT SWITCHES, SENSORS, PROBES, GAS PIPING, PLUMBING PIPING, FIRE ALARM BOXES, SPRINKLER

AutoCAD SHX Text ALARMS, OVERFLOW DRAINS, CONDENSATE DRAINS, REFRIGERANT PIPING, AC UNITS, LOUVERS, DUCT WORK, GRILLES, EXHAUST FANS, BUILDING SIGNAGE, HANDRAILS, AutoCAD SHX Text TYPICAL DETAILS AND COORDINATION NOTES FOR SECURITY APPURTENANCES TO BE REMOVED AND REINSTALLED

AutoCAD SHX Text

DLA TO HANDLE SECURITY APPURTENANCES ON BUILDINGS 6 AND 55

AutoCAD SHX Text TYPICAL NEW ROOF EDGE DETAILS AT NEW EIFS WHERE EXISTING GUTTERS ARE REPLACED WITH NEW GUTTERS. TIE INTO EXISTING CAST IRON RECEIVERS

AutoCAD SHX Text

AT 4'-0" ABOVE GRADE

AutoCAD SHX Text

TYPICAL EXTERIOR FINISH SCHEDULE

AutoCAD SHX Text

GUARDRAILS, LADDERS, METAL CAGES, DOOR ACCESS KEY PADS, DOOR BELLS, ETC

AutoCAD SHX Text TYPICAL DETAILS WHERE EXISTING WINDOWS HAVE BEEN COVERED OVER WITH EXISTING CONSTRUCTION

AutoCAD SHX Text PROCEDURES FOR PREPARATION OF EXISTING SUBSTRATES BOTH IN GOOD CONDITION AND IN POOR CONDITION

AutoCAD SHX Text AREAS WHERE EXTENSIVE REPAIR OF EXISTING SUBSTRATES NEEDS TO BE PERFORMED PRIOR TO INSTALLATION OF NEW EIFS

AutoCAD SHX Text

%%UKEYED NOTES

AutoCAD SHX Text

%%UGENERAL NOTES

AutoCAD SHX Text 1.

AutoCAD SHX Text 2.

AutoCAD SHX Text X

AutoCAD SHX Text

DOOR#

AutoCAD SHX Text

SCALE:

AutoCAD SHX Text

SHT_N02

AutoCAD SHX Text

SHT_N01

AutoCAD SHX Text

SCALE-VALUE

AutoCAD SHX Text

DESCRIPTION_BOTTOM

AutoCAD SHX Text

DESCRIPTION_TOP

AutoCAD SHX Text

REF#

AutoCAD SHX Text

EL.=

AutoCAD SHX Text

ELEVATION

AutoCAD SHX Text

REF_FROM

AutoCAD SHX Text

DWG_NO

AutoCAD SHX Text

SHT_NO1

AutoCAD SHX Text

SHT_N02

AutoCAD SHX Text

SHT#/DWG#

AutoCAD SHX Text

REF:

AutoCAD SHX Text

MATCH LINE

AutoCAD SHX Text

REV#

AutoCAD SHX Text

KEY NOTE INDICATOR

AutoCAD SHX Text

COLUMN INDICATOR

AutoCAD SHX Text

DOOR INDICATOR

AutoCAD SHX Text

REVISION INDICATOR

AutoCAD SHX Text

HOSE BIB HOOK UP

AutoCAD SHX Text PREPARE ALL EXISTING SUBSTRATES TO RECEIVE NEW E.I.F.S. BY PRESSURE WASHING TO REMOVE LOOSELY BONDED PAINT, DIRT, AND SPALLING MATERIAL.

AutoCAD SHX Text DO NOT EXCEED 1000 PSI TIP PRESSURE. EXISTING FIRE HYDRANTS WILL BE AVAILABLE FOR WATER USE.

AutoCAD SHX Text IF PRESSURE WASHING UNCOVERS ANY SERIOUS SUBSTRATE DETERIORATION, STOP CLEANING AND NOTIFY CONTRACTING OFFICER. AT CONTRACTING

AutoCAD SHX Text OFFICERS DIRECTION CONTINUE CLEANING AT A REDUCED PRESSURE TO AVOID EXTENSIVE DAMAGE. IF DETERIORATION CONTINUES, HAND CLEAN THESE

AutoCAD SHX Text CONTINUES, HAND CLEAN THESE AREAS MAKING SURE THAT ALL LOOSE MATERIAL IS REMOVED TO A SOUND SUBSTRATE.

AutoCAD SHX Text ALLOW SUBSTRATE TO DRY A MINIMUM OF 24 HOURS, DEPENDING UPON WEATHER CONDITIONS, BEFORE APPLICATION OF WATERPROOF AIR BARRIER MEMBRANE.

AutoCAD SHX Text REPAIR ALL DETERIORATED SUBSTRATE SURFACES BY FILLING SURFACE VOIDS AS REQUIRED TO PREVENT FURTHER DETERIORATION PRIOR TO APPLICATION

AutoCAD SHX Text %%UPREPARATION NOTES FOR EXISTING STUCCO, E.I.F.S., CMU, CONCRETE AND METAL PANEL SIDING SUBSTRATES:

AutoCAD SHX Text 4.

AutoCAD SHX Text 5.

AutoCAD SHX Text

OF NEW EXTERIOR FINISHES.

AutoCAD SHX Text REFER TO MANUFACTURER'S RECOMMENDATIONS FOR ADDITIONAL PREPARATION OF EXISTING SUBSTRATES REQUIREMENTS.

AutoCAD SHX Text

REMOVE AND DISCARD EXISTING ALUMINUM GUTTERS AND DOWNSPOUTS

AutoCAD SHX Text D1

AutoCAD SHX Text

REMOVAL/REINSTALLATION EXISTING WALL MOUNTED LIGHT FIXTURE

AutoCAD SHX Text

RR1

AutoCAD SHX Text A1

AutoCAD SHX Text

REMOVE AND DISCARD EXISTING METAL ROOF PARAPET CAP FLASHING, SEE

AutoCAD SHX Text D2

AutoCAD SHX Text

PROVIDE AND INSTALL NEW ALUMINUM GUTTERS AND DOWNSPOUTS, CONNECT DOWNSPOUTS

AutoCAD SHX Text

IRON RECEIVER TO REMAIN, SEE DETAIL 1/A-42

AutoCAD SHX Text

INTO EXISTING CAST IRON OR PVC DOWNSPOUT RECEIVER, SEE DETAIL 1/A-42

AutoCAD SHX Text

PROVIDE AND INSTALL NEW METAL FASCIA FLASHING AND SINGLE PLY ROOFING SYSTEM, SEE

AutoCAD SHX Text A2

AutoCAD SHX Text

REMOVE AND DISCARD EXISTING METAL FASCIA FLASHING, BACKER PANELS

AutoCAD SHX Text D3

AutoCAD SHX Text

REMOVAL/REINSTALLATION EXISTING WALL MOUNTED SIGNAGE

AutoCAD SHX Text

RR2

AutoCAD SHX Text E1

AutoCAD SHX Text

EXISTING CAST IRON OR PVC DOWNSPOUT RECEIVER TO REMAIN

AutoCAD SHX Text E2

AutoCAD SHX Text

EXISTING CONCRETE RAMP OR STAIRS TO REMAIN

AutoCAD SHX Text E3

AutoCAD SHX Text

EXISTING STEEL PIPE HANDRAIL/GUARDRAIL TO REMAIN

AutoCAD SHX Text

REMOVAL/REINSTALLATION EXISTING WALL MOUNTED INTERCOM DEVICE

AutoCAD SHX Text

RR3

AutoCAD SHX Text

REMOVAL/REINSTALLATION EXISTING WALL MOUNTED DOOR BELL/BUZZER DEVICE

AutoCAD SHX Text

RR4

AutoCAD SHX Text

REMOVE AND DISCARD EXISTING HOLLOW METAL DOOR AND FRAME,

AutoCAD SHX Text D4

AutoCAD SHX Text E4

AutoCAD SHX Text

EXISTING HOLLOW METAL DOOR AND FRAME TO REMAIN

AutoCAD SHX Text

REMOVAL/REINSTALLATION EXISTING WALL MOUNTED FIRE ALARM DEVICE

AutoCAD SHX Text

RR5

AutoCAD SHX Text

REMOVE EXISTING CONDUIT AND DEVICE, REMOVE EXITING WIRING

AutoCAD SHX Text D11

AutoCAD SHX Text E5

AutoCAD SHX Text

EXISTING MEDIUM VOLTAGE JUNCTION BOX AND CONDUIT TO REMAIN

AutoCAD SHX Text

REMOVAL/REINSTALLATION EXISTING WALL MOUNTED CONDUIT

AutoCAD SHX Text

RR6

AutoCAD SHX Text

REMOVAL/REINSTALLATION EXISTING WALL MOUNTED BUILDING FIRE DEPARTMENT

AutoCAD SHX Text

RR7

AutoCAD SHX Text E6

AutoCAD SHX Text

EXISTING CONDUIT TO REMAIN PROVIDE EXTENSION BOX FOR LB,

AutoCAD SHX Text E7

AutoCAD SHX Text

EXISTING PIPE TO REMAIN, CLEAN, PREP FOR NEW WORK

AutoCAD SHX Text

CONNECTION EXTEND PIPING TO ACCOMMODATE NEW EIFS THICKNESS

AutoCAD SHX Text

REMOVAL/REINSTALLATION EXISTING WALL MOUNTED WATER GONG, OVERFLOW

AutoCAD SHX Text

RR8

AutoCAD SHX Text

PIPE, VALVES & SPRINKLER HEAD EXTEND PIPING TO ACCOMMODATE NEW EIFS THICKNESS

AutoCAD SHX Text

FILL VOID WITH SPRAY FOAM INSULATION AS RECOMMENDED BY E.I.F.S. MFR FLUSH WITH

AutoCAD SHX Text A5

AutoCAD SHX Text

REMOVE AND DISCARD EXISTING STEEL COILING/OVERHEAD GARAGE DOOR, STEEL

AutoCAD SHX Text D5

AutoCAD SHX Text PROVIDE AND INSTALL NEW HEAVY DUTY INSULATED STEEL COILING DOOR/INSULATED OVERHEAD

AutoCAD SHX Text A6

AutoCAD SHX Text E8

AutoCAD SHX Text

EXISTING ALUMINUM WINDOW TO REMAIN, CLEAN, PREP FOR NEW WORK

AutoCAD SHX Text

JUNCTION BOX OR OUTLET WITH REMOVABLE COVER, PROVIDE ADDITIONAL

AutoCAD SHX Text E9

AutoCAD SHX Text

EXISTING CAPPED PIPE TO REMAIN, CLEAN, PREP FOR NEW WORK

AutoCAD SHX Text E10

AutoCAD SHX Text

EXISTING LOUVER/VENT TO REMAIN, CLEAN, PREP FOR NEW WORK

AutoCAD SHX Text EXTEND EXISTING PIPE PENETRATION TO ACCOMMODATE NEW EIFS SYSTEM, SEE DETAIL 6/A-40

AutoCAD SHX Text A7

AutoCAD SHX Text E11

AutoCAD SHX Text

EXISTING ACCESS HATCH WITHIN CANOPY ROOF STRUCTURE TO REMAIN

AutoCAD SHX Text E12

AutoCAD SHX Text

EXISTING OVERHEAD COILING GRILL DOOR TO REMAIN, CLEAN, PREP FOR NEW WORK

AutoCAD SHX Text E13

AutoCAD SHX Text

EXISTING STEEL COILING/OVERHEAD DOOR TO REMAIN, CLEAN, PREP FOR

AutoCAD SHX Text

REMOVAL/REINSTALLATION EXISTING WALL MOUNTED KEY PAD DEVICE

AutoCAD SHX Text

RR9

AutoCAD SHX Text

PATCH AND REPAIR EXISTING SUBSTRATE FLUSH WITH EXISTING

AutoCAD SHX Text A8

AutoCAD SHX Text

REMOVAL/REINSTALLATION EXISTING OVERHEAD DOOR OPENING DEVICE

AutoCAD SHX Text

RR10

AutoCAD SHX Text

REMOVAL/REINSTALLATION EXISTING SECURITY DEVICE

AutoCAD SHX Text

RR11

AutoCAD SHX Text

CUT OFF EXISTING APPURTENANCE FLUSH WITH SUBSTRATE

AutoCAD SHX Text D6

AutoCAD SHX Text

REMOVAL/REINSTALLATION EXISTING WALL MOUNTED FIXTURE

AutoCAD SHX Text

RR12

AutoCAD SHX Text E14

AutoCAD SHX Text

EXISTING CAPPED ROOF LEADER TO REMAIN, CLEAN, PREP FOR NEW WORK

AutoCAD SHX Text

REMOVAL/REINSTALLATION EXISTING STEEL LADDER WITH CAGE TO HIGH ROOF

AutoCAD SHX Text

RR13

AutoCAD SHX Text E15

AutoCAD SHX Text

EXISTING CAPPED GAS MAIN PIPING TO REMAIN, CLEAN, PREP FOR NEW WORK

AutoCAD SHX Text

REMOVAL/REINSTALLATION EXISTING OVERHEAD DOOR SHELTER COVER

AutoCAD SHX Text

RR14

AutoCAD SHX Text

REMOVAL/REINSTALLATION EXISTING WALL MOUNTED FIRE EXTINGUISHER

AutoCAD SHX Text

RR15

AutoCAD SHX Text

EXTEND EXISTING SHEET METAL DUCT WORK

AutoCAD SHX Text A9

AutoCAD SHX Text

REMOVAL, MODIFY AND REINSTALL EXISTING HANDRAIL

AutoCAD SHX Text

RR16

AutoCAD SHX Text

REMOVAL/REINSTALLATION EXISTING RED/GREEN LIGHT FIXTURE

AutoCAD SHX Text

RR17

AutoCAD SHX Text E16

AutoCAD SHX Text

EXISTING INSULATED DUCT WORK TO REMAIN, CLEAN, PREP FOR NEW WORK

AutoCAD SHX Text E17

AutoCAD SHX Text

EXISTING ALUMINUM STOREFRONT TO REMAIN, CLEAN, PREP FOR NEW WORK

AutoCAD SHX Text

INSTALL 8" CMU INFILL AT ABANDONED DUCT WORK

AutoCAD SHX Text A10

AutoCAD SHX Text

REMOVE AND DISCARD EXISTING SHEET METAL DUCT WORK AND PLYWOOD

AutoCAD SHX Text D7

AutoCAD SHX Text

CAP EXISTING PIPE

AutoCAD SHX Text D8

AutoCAD SHX Text

REMOVAL/REINSTALLATION EXISTING ELECTRIC DISCONNECT BOX

AutoCAD SHX Text

RR18

AutoCAD SHX Text E18

AutoCAD SHX Text

EXISTING CONDUIT TO REMAIN

AutoCAD SHX Text

REMOVAL/REINSTALLATION EXISTING COPPER GROUND WIRE WITH PVC SLEEVE

AutoCAD SHX Text

RR19

AutoCAD SHX Text

REMOVE EXISTING EYE HOOK, LADDER, AND OTHER HARDWARE

AutoCAD SHX Text D9

AutoCAD SHX Text

INSTALL NEW EYE HOOK MINIMUM 1" CLEARANCE OF EIFS

AutoCAD SHX Text A11

AutoCAD SHX Text E19

AutoCAD SHX Text

EXISTING WIRE TO REMAIN

AutoCAD SHX Text

REMOVAL/REINSTALLATION EXISTING TELEPHONE BOX

AutoCAD SHX Text

RR20

AutoCAD SHX Text

REMOVAL/REINSTALLATION EXISTING HOSE SPOUT

AutoCAD SHX Text

RR21

AutoCAD SHX Text E20

AutoCAD SHX Text

EXISTING ELECTRICAL BOX/COMPONENTS TO REMAIN

AutoCAD SHX Text

REMOVAL/REINSTALLATION EXISTING MAILBOXES

AutoCAD SHX Text

RR22

AutoCAD SHX Text

PROVIDE AND INSTALL METAL GUARD RAIL SYSTEM, SEE DETAILS 3, 4 & 5/A-43

AutoCAD SHX Text A12

AutoCAD SHX Text

REMOVE EXISTING DOCK BUMPERS

AutoCAD SHX Text D10

AutoCAD SHX Text E21

AutoCAD SHX Text

EXISTING EMBEDDED STEEL ANGLE TO REMAIN

AutoCAD SHX Text

REMOVAL/REINSTALLATION EXISTING LOUD SPEAKER

AutoCAD SHX Text

RR23

AutoCAD SHX Text

EXTEND EXISTING OVERFLOW PIPE TO ACCOMMODATE NEW EIFS SYSTEM

AutoCAD SHX Text A13

AutoCAD SHX Text

REMOVAL/REINSTALLATION EXISTING WALL MOUNTED CAMERA

AutoCAD SHX Text

RR24

AutoCAD SHX Text

REMOVAL/REINSTALLATION EXISTING WALL MOUNTED ANTENA/SATELLITE DISH

AutoCAD SHX Text

RR25

AutoCAD SHX Text

REMOVAL/REINSTALLATION EXISTING AC PIPING

AutoCAD SHX Text

RR26

AutoCAD SHX Text

EXTEND EXISTING JUNCTION BOX TO ACCOMMODATE NEW EIFS SYSTEM

AutoCAD SHX Text A14

AutoCAD SHX Text

REMOVAL/REINSTALLATION EXISTING UNISTRUT SUPPORT BRACKET AND ANCHOR PLATE

AutoCAD SHX Text

RR27

AutoCAD SHX Text

REMOVAL/REINSTALLATION EXISTING WALL MOUNTED ELECTRICAL BOX

AutoCAD SHX Text

RR28

AutoCAD SHX Text E22

AutoCAD SHX Text

EXISTING AC UNIT TO REMAIN

AutoCAD SHX Text E23

AutoCAD SHX Text

EXISTING DUCT WORK TO REMAIN

AutoCAD SHX Text

BACK TO NEAREST JUNCTION BOX INSIDE BUILDING

AutoCAD SHX Text

REMOVAL/REINSTALLATION EXISTING WALL MOUNTED KEY PAD/CARD READER

AutoCAD SHX Text

RR29

AutoCAD SHX Text E24

AutoCAD SHX Text

EXISTING LOADING DOCK BUMPERS TO REMAIN

AutoCAD SHX Text E25

AutoCAD SHX Text

EXISTING ANTENA TO REMAIN

AutoCAD SHX Text E26

AutoCAD SHX Text

EXISTING STRUCTURE TO REMAIN

AutoCAD SHX Text E33

AutoCAD SHX Text

EXISTING BOLT PROTRUSION TO REMAIN

AutoCAD SHX Text E27

AutoCAD SHX Text

EXISTING WALL BRACKETS TO REMAIN

AutoCAD SHX Text

REMOVE EXISTING METAL TRIM EDGE AT BOTTOM OF STUCCO

AutoCAD SHX Text D12

AutoCAD SHX Text

REMOVAL/REINSTALLATION EXISTING FENCE POST

AutoCAD SHX Text

RR30

AutoCAD SHX Text

REMOVAL/REINSTALLATION EXISTING AC UNIT

AutoCAD SHX Text

RR31

AutoCAD SHX Text

PROVIDE AND INSTALL CONCEALED WOOD BLOCKING AND SUPPORT AT EXISTING APPURTENANCE

AutoCAD SHX Text A15

AutoCAD SHX Text

BRACED BACK TO BUILDING FACADE

AutoCAD SHX Text E28

AutoCAD SHX Text

EXISTING WALL MOUNTED LIGHT FIXTURE TO REMAIN

AutoCAD SHX Text

EXTEND EXISTING HOSE BIB TO ACCOMMODATE NEW EIFS SYSTEM

AutoCAD SHX Text A16

AutoCAD SHX Text PROVIDE AND INSTALL 4" THICK CLOSED CELL POLYURETHANE FOAM INSULATION AT R-6 PER INCH

AutoCAD SHX Text A17

AutoCAD SHX Text

(TOTAL MIN. NEW R VALUE = 24) OVER OVER EXISTING CMU EXTERIOR WALL AND ON TOP OF

AutoCAD SHX Text

EXISTING LOADING DOCK CANOPY ROOF TO REMAIN - HIDDEN WITHIN EXISTING CANOPY ROOF

AutoCAD SHX Text A18

AutoCAD SHX Text

%%UEXISTING:

AutoCAD SHX Text

%%UDEMOLITION:

AutoCAD SHX Text

%%UREMOVAL/REINSTALLATION:

AutoCAD SHX Text

%%UNEW WORK:

AutoCAD SHX Text E29

AutoCAD SHX Text

EXISTING STANDING SEAM ROOF SYSTEM TO REMAIN

AutoCAD SHX Text E30

AutoCAD SHX Text

EXISTING STEEL PIPE COLUMNS AT EXISTING LOADING DOCKS/CANOPIES

AutoCAD SHX Text

TO REMAIN, PAINT (PORTION OF EXISTING PIPE COLUMNS NOT SHOWN

AutoCAD SHX Text

FOR CLARITY)

AutoCAD SHX Text PROVIDE AND INSTALL NEW E.I.F.S. SYSTEM OVER EXISTING SUBSTRATE TO EQUAL MINIMUM THICKNESS

AutoCAD SHX Text A3

AutoCAD SHX Text

EXISTING SUBSTRATE

AutoCAD SHX Text

CHANGE IN EXISTING SUBSTRATE PLANE

AutoCAD SHX Text A19

AutoCAD SHX Text

NEW REVEAL JOINT, SEE DETAIL 2/A-40

AutoCAD SHX Text A20

AutoCAD SHX Text

NEW CONTROL JOINT, ALIGN WITH EXISTING CONTROL JOINT U.N.O., SEE DETAIL 3/A-40

AutoCAD SHX Text E31

AutoCAD SHX Text

EXISTING FIRE DEPARTMENT CONNECTION/VALVE TO REMAIN

AutoCAD SHX Text

PROVIDE STANDARD IMPACT RESISTANT MESH AT 2ND FLOOR AREAS

AutoCAD SHX Text

OF 4" TOTAL. SEE MESH NOTES AND KEY NOTES BELOW:

AutoCAD SHX Text E32

AutoCAD SHX Text

EXISTING BOLLARD TO REMAIN

AutoCAD SHX Text

PROVIDE HIGH IMPACT RESISTANT MESH AT 1ST FLOOR AREAS

AutoCAD SHX Text

PROVIDE ULTRA HIGH IMPACT RESISTANT MESH AT LOADING DOCKS AND PARKING AREAS

AutoCAD SHX Text

LENGTH OF CONDUCTORS AS REQUIRED FOR EXTENSION BOX DEPTH,

AutoCAD SHX Text

CONDUCTOR SPLICING TO OCCUR IN EXISTING METAL BOX TO REMAIN

AutoCAD SHX Text A21

AutoCAD SHX Text PATCH AND REPAIR EXISTING EXPOSED SUBSTRATE FINISH OVER CONCRETE FOUNDATION BELOW

AutoCAD SHX Text

NEW E.I.F.S. TERMINATION, PAINT, SEE DETAIL 4/A-40

AutoCAD SHX Text

NEW WORK

AutoCAD SHX Text E34

AutoCAD SHX Text

EXISTING METAL STANDING SEAM ROOF SYSTEM TO REMAIN

AutoCAD SHX Text GARAGE DOOR (R-17.5 MIN.), SEE DETAIL 3/A-41. NEW LOCATIONS TO BE COORDIANTED WITH

AutoCAD SHX Text

PROVIDE AND INSTALL NEW BLAST RESISTANT ALUMINUM WINDOW WITH INSULATED GLAZING,

AutoCAD SHX Text A22

AutoCAD SHX Text

U-VALUE .45 MIN., SEE DETAIL 2/A-41

AutoCAD SHX Text

SCORE JOINT

AutoCAD SHX Text

%%USYMBOLS AND LEGEND

AutoCAD SHX Text

ELECTRICAL JUNCTION BOX

AutoCAD SHX Text

(SIZE VARIES)

AutoCAD SHX Text

EXTERIOR SENSOR

AutoCAD SHX Text

FIRE ALARM GONG AND

AutoCAD SHX Text

FIRE DEPARTMENT CONNECTION

AutoCAD SHX Text

SPOT LIGHT FIXTURE

AutoCAD SHX Text

OVERFLOW PIPE

AutoCAD SHX Text

SMALL BOX LIGHT FIXTURE

AutoCAD SHX Text

MEDIUM LIGHT FIXTURE

AutoCAD SHX Text

WALL MOUNTED CAMERA

AutoCAD SHX Text

LEAKING GUTTERS AND DOWNSPOUTS

AutoCAD SHX Text

CRACKING/VOIDS IN EXISTING SUBSTRATE

AutoCAD SHX Text

INADEQUATE FLASHING

AutoCAD SHX Text

POOR CAULKING - LACK OF MAINTENANCE

AutoCAD SHX Text

MESH EIFS

AutoCAD SHX Text

THE METAL ROOF CANOPIES

AutoCAD SHX Text FLUID APPLIED AIR/MOISTURE BARRIER TO BE INSTALLED OVER PREPARED SUBSTRATE IN COMPLIANCE WITH MANUFACTURER'S PUBLISHED INSTRUCTIONS.

AutoCAD SHX Text 6.

AutoCAD SHX Text COORDINATE INSTALLATION OF AIR/MOISTURE BARRIER WITH OTHER TRADES TO PROVIDE A CONTINUOUS AIR TIGHT MEMBRANE. COORDIANTE INSTALLATION OF

AutoCAD SHX Text AIR/MOISTURE BARRIER WITH INSTALLATION OF FLASHING AND OTHER MOISTURE PROTECTION COMPONENTS BY OTHER TRADES TO ACHIEVE A COMPLETE MOISTURE

AutoCAD SHX Text PROTECTION SYSTEM SUCH THAT WATER IS DIRECTED TO THE EXTERIOR, NOT IN THE WALL ASSEMBLY, AND DRAINED TO THE EXTERIOR AT SOURCES OF LEAKS

AutoCAD SHX Text

(WINDOWS, DOORS, AND SIMILAR PENETRATIONS THROUGH THE WALL ASSEMBLY).

AutoCAD SHX Text

PROVIDE AND INSTALL A MINIMUM OF 4" NEW E.I.F.S. AT R-3.8 PER INCH (TOTAL MIN.

AutoCAD SHX Text A3A

AutoCAD SHX Text

PROVIDE AND INSTALL NEW HOLLOW METAL DOOR FRAME, INSULATED HOLLOW METAL DOOR

AutoCAD SHX Text A4

AutoCAD SHX Text

PROVIDE AND INSTALL A MINIMUM OF 3" NEW E.I.F.S. AT R-3.8 PER INCH (TOTAL MIN.

AutoCAD SHX Text A3B

AutoCAD SHX Text

PROVIDE AND INSTALL A MINIMUM OF 4" NEW E.I.F.S. AT R-3.8 PER INCH (TOTAL MIN.

AutoCAD SHX Text A3C

AutoCAD SHX Text

PROVIDE AND INSTALL A MINIMUM OF 4" NEW E.I.F.S. AT R-3.8 PER INCH (TOTAL MIN.

AutoCAD SHX Text A3D

AutoCAD SHX Text

PROVIDE AND INSTALL A MINIMUM OF 4" NEW E.I.F.S. AT R-3.8 PER INCH (TOTAL MIN.

AutoCAD SHX Text A3E

AutoCAD SHX Text

R VALUE = 15.2) OVER EXISTING STUCCO OVER CMU SUBSTRATE

AutoCAD SHX Text

R VALUE = 15.2) OVER EXISTING CONCRETE FOUNDATION WALL, SEE DETAIL 1D/A-40

AutoCAD SHX Text

R VALUE = 15.2) OVER 5/8" GLASS MAT GYPSUM WALL SHEATHING ON 7/8" FURRING/

AutoCAD SHX Text (R-10 MIN.) AND DOOR HARDWARE, SEE DETAILS 9/A-40 AND 5/A-41. NEW LOCATIONS TO BE

AutoCAD SHX Text

R VALUE = 15.2) OVER EXISTING 1" E.I.F.S. OVER CMU SUBSTRATE, SEE DETAIL 1B/A-40

AutoCAD SHX Text

R VALUE = 15.2) OVER EXISTING CMU SUBSTRATE, SEE DETAIL 1C/A-40

AutoCAD SHX Text E35

AutoCAD SHX Text

EXISTING METAL PANEL WALL SYSTEM AND ASSOCIATED APPURTENANCES

AutoCAD SHX Text

ATTACHED TO THE METAL PANEL WALL SYSTEM ARE TO REMAIN, N.I.C.

AutoCAD SHX Text

AND SINGLE PLY ROOFING SYSTEM, SEE DETAIL 1/A-42

AutoCAD SHX Text

DETAIL 2/A-42

AutoCAD SHX Text

LOCATIONS TO BE COORDINATED WITH CONTRACTING OFFICER'S REPRESENTATIVE

AutoCAD SHX Text

JAMB TO REMAIN, LOCATIONS TO BE COORDINATED WITH CONTRACTING OFFICER'S

AutoCAD SHX Text

REPRESENTATIVE, SEE DETAIL 3/A-41

AutoCAD SHX Text

DETAIL 1/A-42

AutoCAD SHX Text

COORDINATED WITH CONTRACTING OFFICER'S REPRESENTATIVE

AutoCAD SHX Text

CONTRACTING OFFICER'S REPRESENTATIVE

AutoCAD SHX Text

PROVIDE AND INSTALL NEW METAL ROOF PARAPET CAP FLASHING, SEE DETAIL 2/A-42

AutoCAD SHX Text A23

AutoCAD SHX Text E36

AutoCAD SHX Text

EXISTING CONCRETE LOADING DOCK FOUNDATION TO REMAIN AS IS, N.I.C.

AutoCAD SHX Text E37

AutoCAD SHX Text

EXISTING CONCRETE LOADING DOCK SLAB TO REMAIN AS IS, N.I.C.

AutoCAD SHX Text CONTRACTOR SHALL COORDINATE AND VERIFY WITH THE CONTRACTING OFFICER REPRESENTATIVE (COR) THE LOCATIONS, SIZE AND QUANTITIES OF DUMPSTERS AND

AutoCAD SHX Text CONTRACTOR SHALL SAFEGUARD AND PROTECT ALL THE CONTRACTING OFFICER'S EMPLOYEES, BUILDING OCCUPANTS, BUILDING, PROPERTIES, ADJACENT PROPERTIES

AutoCAD SHX Text 1.

AutoCAD SHX Text GENERAL CONTRACTOR IS RESPONSIBLE FOR THE REMOVAL AND REINSTALLATION OF ALL EXISTING APPURTENANCES THAT WILL BE REQUIRED FOR THE COMPLETE

AutoCAD SHX Text DURING DEMOLITION/ CONSTRUCTION AND SHALL REPLACE OR RESTORE ANY DAMAGED PROPERTY THAT OCCURS DURING THIS CONTRACT TO ORIGINAL CONDITION

AutoCAD SHX Text

AT NO COST TO THE GOVERNMENT.

AutoCAD SHX Text 2.

AutoCAD SHX Text THE STORAGE OF MATERIALS ON SITE DURING DEMOLITION/ CONSTRUCTION. CONTRACTOR SHALL COORDINATE AND VERIFY WITH THE CONTRACTING OFFICER

AutoCAD SHX Text REPRESENTATIVE (COR) THE SCHEDULING OF DELIVERY OF MATERIALS AND PARKING ARRANGEMENTS THAT MAY BE REQUIRED.

AutoCAD SHX Text 7.

AutoCAD SHX Text

INSTALLATION OF THE SPECIFIED NEW EIFS.

AutoCAD SHX Text GENERAL CONTRACTOR IS RESPONSIBLE FOR THE REMOVAL AND REINSTALLATION OF ALL EXISTING MISCELLANEOUS ITEMS ON THE ROOF THAT WILL BE REQUIRED

AutoCAD SHX Text 8.

AutoCAD SHX Text

FOR THE COMPLETE INSTALLATION OF THE SPECIFIED NEW ROOF SYSTEM.

AutoCAD SHX Text AFTER PRESSURE WASHING, CLEAN ALL EXTERIOR WALLS, THEN APPLY FUNGICIDE TO ALL EXTERIOR WALLS, FINAL WASH APPLY MILDEW CHECK.

AutoCAD SHX Text 3.

AutoCAD SHX Text INTERRUPTION TO WATER, SANITARY SEWER, STORM SEWER, TELEPHONE SERVICE, ELECTRICAL SERVICE, AIR CONDITIONING, HEATING, FIRE ALARM, COMPRESSED AIR, AutoCAD SHX Text 3.

AutoCAD SHX Text AND SECURITY SHALL BE CONSIDERED UTILITY CUTOVERS, THIS WORK SHALL BE PERFORMED AS "WORK OUTSIDE REGULAR HOURS." WORK OUTSIDE REGULAR WORKING

AutoCAD SHX Text HOURS REQUIRES CONTRACTING OFFICER REPRESENTATIVE (COR) APPROVAL. MAKE APPLICATION 15 CALENDAR DAYS PRIOR TO SUCH WORK TO ALLOW ARRANGEMENTS

AutoCAD SHX Text

TO BE MADE BY THE COR.

AutoCAD SHX Text 4.

AutoCAD SHX Text

ALL APPURTENANCES TO BE REMOVED/REINSTALLED ARE TO BE CLEANED AND PREPPED FOR

AutoCAD SHX Text

REINSTALLATION PER DETAILS

AutoCAD SHX Text THE INTENT OF THE CONTRACT DOCUMENTS IS TO ALLOW FOR THE PERFORMANCE OF WORK. EVERY ITEM NECESSARILY REQUIRED MAY NOT BE SPECIFICALLY MENTIONED

AutoCAD SHX Text 5.

AutoCAD SHX Text OR SHOWN. UNLESS EXPRESSLY STATED, ALL SYSTEMS AND EQUIPMENT SHALL BE COMPLETED AND APPROPRIATELY OPERABLE. FURNISH AND INSTALL ALL APPROPRIATE

AutoCAD SHX Text ITEMS, AND ALL INCIDENTAL, ACCESSORY AND/OR OTHER ITEMS NOT SPECIFIED BUT REQUIRED FOR A COMPLETE AND FINISHED ASSEMBLY.

AutoCAD SHX Text NO WORK DEFECTIVE IN WORKMANSHIP OR QUALITY OR DEFICIENT IN ANY REQUIREMENTS OF THE CONTRACT DOCUMENTS WILL BE ACCEPTABLE REGARDLESS OF THE

AutoCAD SHX Text 6.

AutoCAD SHX Text ARCHITECT OR CONTRACTING OFFICER REPRESENTATIVE (COR) FAILURE TO DISCOVER OR POINT OUT DEFECTS OR DEFICIENCIES DURING CONSTRUCTION. DEFECTIVE WORK

AutoCAD SHX Text REVEALED WITHIN THE TIME REQUIRED BY GUARANTEES SHALL BE REPLACED BY WORK CONFORMING WITH THE INTENT OF THE CONTRACT. NO PAYMENT, EITHER PARTIAL

AutoCAD SHX Text OR FINAL, SHALL BE CONSTRUED AS AN ACCEPTANCE OF DEFECTIVE WORK OR IMPROPER MATERIALS.

AutoCAD SHX Text ALL MATERIALS FURNISHED AND WORK PERFORMED WILL COMPLY WITH CURRENT FEDERAL/STATE LAWS, STATE/LOCAL CODES, REQUIREMENTS OF LOCAL UTILITY

AutoCAD SHX Text 7.

AutoCAD SHX Text COMPANIES, FIRE AND HEALTH DEPARTMENTS, INDUSTRY STANDARDS REFERENCED IN SPECIFICATIONS, AND MANUFACTURER'S INSTALLATION INSTRUCTIONS, WHICHEVER

AutoCAD SHX Text

IS MOST RESTRICTIVE IN ORDER TO PROVIDE A COMPLETE PROJECT.

AutoCAD SHX Text REVIEW DOCUMENTS, VERIFY ALL DIMENSIONS, ALL EXISTING FIELD CONDITIONS AND CONFIRM THAT WORK IS BUILDABLE AS SHOWN. REPORT ANY CONFLICTS OR OMISSIONS

AutoCAD SHX Text 8.

AutoCAD SHX Text TO THE ARCHITECT FOR CLARIFICATION PRIOR TO CONSTRUCTION. EACH SUBCONTRACTOR, WITH THE GENERAL CONTRACTOR, WILL VERIFY AND COORDINATE LOCATION FOR

AutoCAD SHX Text ALL MECHANICAL, PLUMBING, ELECTRICAL AND STRUCTURAL WORK. IN THEIR RESPECTIVE AREA PRIOR TO CONSTRUCTION.

AutoCAD SHX Text COORDINATE WORK WITH THE CONTRACTING OFFICER REPRESENTATIVE (COR), INCLUDING SCHEDULING TIME, LOCATIONS FOR DELIVERIES, BUILDING ACCESS, USE

AutoCAD SHX Text 9.

AutoCAD SHX Text OF BUILDING SERVICES AND FACILITIES. MINIMIZE DISTURBANCE OF BUILDING FUNCTIONS AND OCCUPANTS.

AutoCAD SHX Text DO NOT SCALE DRAWINGS. DIMENSIONS SHALL GOVERN. DETAILS SHALL GOVERN OVER PLANS AND ELEVATIONS. LARGE SCALE DETAILS SHALL GOVERN OVER SMALL SCALE

AutoCAD SHX Text 10.

AutoCAD SHX Text

DETAILS. WRITTEN SPECIFICATIONS SHALL GOVERN OVER ALL.

AutoCAD SHX Text MAINTAIN EXITS, EXIT LIGHTING, FIRE PROTECTIVE DEVICES, AND ALARMS IN CONFORMANCE WITH CODES AND ORDINANCES.

AutoCAD SHX Text 11.

AutoCAD SHX Text PROVIDE STRICT CONTROL OF JOB CLEANING AND PREVENT DUST AND DEBRIS FROM EMANATING FROM CONSTRUCTION AREA INTO ADJACENT OCCUPIED AND UNOCCUPIED

AutoCAD SHX Text 12.

AutoCAD SHX Text

SPACES.

AutoCAD SHX Text DAMAGE BY GENERAL CONTRACTOR OR SUB-CONTRACTOR TO EXISTING BUILDING, CONCRETE FLOORS, MASONRY WALLS, INTERIOR FINISHES, ETC. WILL BE REPAIRED AT

AutoCAD SHX Text 13.

AutoCAD SHX Text NO COST TO THE OWNER. CONTRACTOR SHALL BE RESPONSIBLE FOR PATCHING AND/OR REPAIRING ANY DAMAGE CAUSED BY THEM OR THEIR SUB-CONTRACTORS TO

AutoCAD SHX Text

%%UDEMOLITION NOTES

AutoCAD SHX Text FURNISH ALL LABOR AND MATERIALS/EQUIPMENT AS REQUIRED TO COMPLETE DEMOLITION AND REMOVAL OF ALL ITEMS INDICATED.

AutoCAD SHX Text 1.

AutoCAD SHX Text CONDITIONS SHOWN REMOVED ARE FOR REFERENCE ONLY, THE DRAWINGS ARE APPROXIMATE IN QUANTITY, LOCATIONS AND DIMENSION. GENERAL CONTRACTOR

AutoCAD SHX Text 2.

AutoCAD SHX Text RESPONSIBLE TO FIELD SURVEY EXISTING CONDITIONS PRIOR TO START OF DEMOLITION WORK.

AutoCAD SHX Text IF ANY QUESTIONS ARISE AS TO THE REMOVAL OF ANY MATERIAL, CLARIFY THE POINT IN QUESTION IN WRITING TO THE ARCHITECT BEFORE PROCEEDING.

AutoCAD SHX Text 3.

AutoCAD SHX Text GENERAL CONTRACTOR SHALL BE RESPONSIBLE FOR THE COORDINATION OF ALL DEMOLITION WORK REQUIRED BY DOCUMENTS AND SCOPE.

AutoCAD SHX Text 4.

AutoCAD SHX Text EXISTING CONSTRUCTION. REFINISH TO MATCH ADJACENT FINISH, OR AS NOTED HEREIN. IT SHALL BE THE GENERAL CONTRACTOR'S RESPONSIBILITY TO DOCUMENT ANY

AutoCAD SHX Text

PRE-EXISTING DAMAGE AND NOTIFY ARCHITECT OF ANY SUCH DAMAGE.

AutoCAD SHX Text CONDUCT DEMOLITION OPERATIONS AND REMOVE DEBRIS TO PREVENT INJURY TO PEOPLE AND DAMAGE TO AREAS OF THE BUILDING, SITE AND VEHICLES OUTSIDE OF

AutoCAD SHX Text 5.

AutoCAD SHX Text

CONSTRUCTION SITE.

AutoCAD SHX Text GENERAL CONTRACTOR SHALL PROVIDE AND MAINTAIN PROTECTIVE BARRICADES AND ANY OTHER MEASURES REQUIRED TO ALLOW FREE AND SAFE PASSAGE OF EMPLOYEES

AutoCAD SHX Text 6.

AutoCAD SHX Text

TO ALL ENTRANCES AND EXITS.

AutoCAD SHX Text EXISTING LOADING DOCK CONCRETE FOUNDATION AND SLAB ARE TO REMAIN AS IS AND ARE NOT IN CONTRACT (N.I.C.) .

AutoCAD SHX Text 14.

AutoCAD SHX Text EXISTING STANDING SEAM ROOF CANOPIES OVER LOADING DOCKS AND AT BUILDING ENTRANCES ARE TO REMAIN AS IS UNLESS OTHERWISE NOTED. WHERE THE

AutoCAD SHX Text 15.

AutoCAD SHX Text NEW E.I.F.S. SYSTEM ABUTS THE EXISTING STANDING SEAM CANOPY AND/OR CANOPY SOFFIT MODIFY AS SHOWN IN DETAILS.

AutoCAD SHX Text EXTERIOR PAINTING: INCLUDES NEW SURFACES (UNLESS PRE-FINISHED), EXISTING UNCOATED SURFACES, AND EXISTING PREVIOUSLY PAINTED SURFACES (ATTACHED TO OR

AutoCAD SHX Text 16.

AutoCAD SHX Text INSTALLED WITHIN THE EXTERIOR BUILDING ENVELOPE), EXISTING STEEL PIPE COLUMNS, BASE PLATES, STEEL STRUTS, SPRINKLER SYSTEM WATER GONG MOTOR ALARM, FIRE

AutoCAD SHX Text DO NOT PAINT THE FOLLOWING UNLESS INDICATED OTHERWISE: SURFACES CONCEALED AND MADE INACCESSIBLE BY NEW WORK, STEEL TO BE EMBEDDED IN CONCRETE OR

AutoCAD SHX Text 17.

AutoCAD SHX Text MASONRY, COPPER, STAINLESS STEEL, ALUMINUM, BRASS, AND LEAD EXCEPT EXISTING COATED SURFACES, HARDWARE, FITTINGS, STANDINGS SEAM ROOF CANOPIES AND SOFFIT, AutoCAD SHX Text

ALUMINUM STOREFRONTS, AND OTHER FACTORY FINISHED ITEMS.

AutoCAD SHX Text ALARM BELLS, EXTERIOR SURFACES OF EXISTING OVERHEAD DOORS AND FRAMES (PREVIOUSLY PAINTED ONLY) TO REMAIN, EXTERIOR SURFACES OF EXISTING HOLLOW METAL

AutoCAD SHX Text DOORS AND FRAMES TO REMAIN, EXTERIOR SURFACES OF EXISTING HOLLOW METAL WINDOW FRAMES TO REMAIN, ETC. SEE EXTERIOR PAINTING SCHEDULE.

AutoCAD SHX Text PROVIDE BACKER ROD AND SEALANT AT ALL CONTROL JOINTS, CONTROL JOINTS SHOULD BE CLEANED AND CLEAR OF E.I.F.S. FINISH COAT.

AutoCAD SHX Text 18.

AutoCAD SHX Text REMOVE ALL EXISTING METAL SIGNAGE, SAVE AND REINSTALL ON FACE OF NEW E.I.F.S. FINISH, SEE DETAIL 7/A-40.

AutoCAD SHX Text 19.

AutoCAD SHX Text PREPARE EXISTING SURFACES FOR APPLICATION OF THE E.I.F.S. TO MEET FLATNESS TOLERANCES AND SURFACE PREPARARTION ACCORDING TO MANUFACTURER'S

AutoCAD SHX Text 9.

AutoCAD SHX Text INSTALLATION INSTRUCTIONS. pROVIDE CLEAN SURFACES FREE OF OIL AND LOOSE MATERIAL WITHOUT PROTRUSIONS ADVERSELY AFFECTING THE INSTALLATION OF THE

AutoCAD SHX Text INSULATION BOARD. FOR ADHESIVELY ATTACHED E.I.F.S., EXISTING DETERIORATED PAINT MUST BE REMOVED. DUE TO SUBSTRATE CONDITIONS OR AS RECOMMENDED BY THE

AutoCAD SHX Text SYSTEM MANUFACTURER, A PRIMER MAY BE REQUIRED. APPLY THE PRIMER TO EXISTING SURFACES AS RECOMMENDED BY THE MANUFACTURER. PROTECT AREAS ADJACENT

AutoCAD SHX Text TO THE E.I.F.S. TO PREVENT BASE OR FINISH COAT TO BE APPLIED TO AREAS NOT INTENDED TO BE COVERED WITH THE E.I.F.S. THE CONTRACTOR SHALL NOT PROCEED

AutoCAD SHX Text WITH THE INSTALLATION UNTIL ALL NOTED DEFICIENCIES OF THE SUBSTRATE ARE CORRECTED.

AutoCAD SHX Text

REMOVE AND DISCARD EXISTING OVERHEAD COILING GRILL, LOCATIONS TO BE

AutoCAD SHX Text D13

AutoCAD SHX Text

COORDINATED WITH CONTRACTING OFFICER'S REPRESENTATIVE, SEE DETAIL 5/A-41

AutoCAD SHX Text

STRUCTURE, SEE DETAIL 12/A-40

AutoCAD SHX Text PROVIDE…

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it.