W15QKN-19-R-0103_Attachment_-_Lifting_Eye_Kit_Fasteners_Sub_Kit_A_BOM.xlsx

XLSX spreadsheet 12 KB Posted Apr 3, 2019

Attached to: Lifting Eye Fasteners
Solicitation number: W15QKN-19-R-0103
Issued by: Department of the Army Materiel Command Contracting Command Picatinny Arsenal

About this file

From the source

Sub Kit A BOM

View the file

Other files

File	Type	Posted
W15QKN19-R-0103_SECTION_B_ATTACHMENT.docx	DOCX document	May 2, 2019
W15QKN-19-R-0103_Attachment_-_CDRL_A002_-_Accident-Incident_Report.pdf	PDF	Apr 3, 2019
W15QKN-19-R-0103_Attachment_-_Statement_of_Work_-_Lifting_Eye_Kits.docx	DOCX document	Apr 3, 2019
W15QKN-19-R-0103_Attachment_-_CDRL_A001_-_Certificate_of_Compliance.pdf	PDF	Apr 3, 2019
W15QKN-19-R-0103_Attachment_-_CDRL_A003_-_Status_Report_-_Tailored.pdf	PDF	Apr 3, 2019

On GovTribe

Work with this file

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

Sheet1

Lifting Eye Fasteners: SUBKIT A Bill of Materials
Item No.	Part Number	Item Description	Note 1	Note 2	Finish Information	Heat Treatment	Note 3	NADCAP accredited for ASTM B633/F1941/F1941M for zinc plating, and ASTM B849/850 for heat treatment.	Qty. per Kit
1	10910174-23	.781 Flat Washer	FINISH 1.9.2.1 OF MIL-STD-171.		ASTM B633, Standard Specification for Electrodeposited Coatings of Zinc on Iron and Steel	4130 STEEL PER ASM 6350 HEAT TREAT	QUENCH AND TEMPER HRC 33-38.	Required	4
2	10910174-28	.50 Flat Washer	FINISH 1.9.2.1 OF MIL-STD-171.		ASTM B633, Standard Specification for Electrodeposited Coatings of Zinc on Iron and Steel	4130 STEEL PER ASM 6350 HEAT TREAT	QUENCH AND TEMPER HRC 33-38.	Required	19
3	10910174-8	.75 Flat Washer	FINISH 1.9.2.1 OF MIL-STD-171.		ASTM B633, Standard Specification for Electrodeposited Coatings of Zinc on Iron and Steel	4130 STEEL PER ASM 6350 HEAT TREAT	QUENCH AND TEMPER HRC 33-38.	Required	6
4	NOT USED
5	AES14RA00B75BB3A91	1-8 X 2-3/4 SHCS	ASME Standard B.18.24-2015, Part Identifying Number (PIN) Code System Standard for B18 Fastener Products	ASTM-A574-17, Screws, Cap, Allow Steel, Socket-Head	ASTM B633, Standard Specification for Electrodeposited Coatings of Zinc on Iron and Steel,	ASTM B849-02, Pre-Treatment of Iron or Steel for Reducing Risk of Hydrogen Embrittlement, ASTM B850-98, Post-Coating Treatments of Steel for Reducing the Risk of Hydrogen Embrittlement		Required	4
6	AES14RA00C25BB3A91	1-8 X 3-1/4 SHCS	ASME Standard B.18.24-2015, Part Identifying Number (PIN) Code System Standard for B18 Fastener Products	ASTM-A574-17, Screws, Cap, Allow Steel, Socket-Head	ASTM B633, Standard Specification for Electrodeposited Coatings of Zinc on Iron and Steel	ASTM B849-02, Pre-Treatment of Iron or Steel for Reducing Risk of Hydrogen Embrittlement, ASTM B850-98, Post-Coating Treatments of Steel for Reducing the Risk of Hydrogen Embrittlement		Required	8
7	AES14RA00C50BB3A91	1-8 X 3-1/2 SHCS	ASME Standard B.18.24-2015, Part Identifying Number (PIN) Code System Standard for B18 Fastener Products	ASTM-A574-17, Screws, Cap, Allow Steel, Socket-Head	ASTM B633, Standard Specification for Electrodeposited Coatings of Zinc on Iron and Steel	ASTM B849-02, Pre-Treatment of Iron or Steel for Reducing Risk of Hydrogen Embrittlement, ASTM B850-98, Post-Coating Treatments of Steel for Reducing the Risk of Hydrogen Embrittlement		Required	4
8	AES14RA00D00BB3A91	1-8 X 4 SHCS	ASME Standard B.18.24-2015, Part Identifying Number (PIN) Code System Standard for B18 Fastener Products	ASTM-A574-17, Screws, Cap, Allow Steel, Socket-Head	ASTM B633, Standard Specification for Electrodeposited Coatings of Zinc on Iron and Steel	ASTM B849-02, Pre-Treatment of Iron or Steel for Reducing Risk of Hydrogen Embrittlement, ASTM B850-98, Post-Coating Treatments of Steel for Reducing the Risk of Hydrogen Embrittlement		Required	4
9	B1821BH050C175N	1/2-13 X 1-3/4 HHCS	ASME B18.2.1-2012, Square, Hex, Heavy Hex, and Askew Head Bolts and Hex, Heavy Hex, Hex Flange, Lobed Head, and Lag Screws (Inch Series)	ASME B1.1 CLASS 2A	ASTM B633, Standard Specification for Electrodeposited Coatings of Zinc on Iron and Steel			Required	14
10	B1821BH050C250N	1/2-13 X 2-1/2 HHCS	ASME B18.2.1-2012, Square, Hex, Heavy Hex, and Askew Head Bolts and Hex, Heavy Hex, Hex Flange, Lobed Head, and Lag Screws (Inch Series)	ASME B1.1 CLASS 2A	ASTM B633, Standard Specification for Electrodeposited Coatings of Zinc on Iron and Steel			Required	5
11	B1821BH075C225N	3/4-10 X 2-1/4 HHCS	ASME B18.2.1-2012, Square, Hex, Heavy Hex, and Askew Head Bolts and Hex, Heavy Hex, Hex Flange, Lobed Head, and Lag Screws (Inch Series)	ASME B1.1 CLASS 2A	ASTM B633, Standard Specification for Electrodeposited Coatings of Zinc on Iron and Steel			Required	4
12	B1821BH075C275N	3/4-10 X 2-3/4 HHCS	ASME B18.2.1-2012, Square, Hex, Heavy Hex, and Askew Head Bolts and Hex, Heavy Hex, Hex Flange, Lobed Head, and Lag Screws (Inch Series)	ASME B1.1 CLASS 2A	ASTM B633, Standard Specification for Electrodeposited Coatings of Zinc on Iron and Steel			Required	6
13	MS45904-76	Int/Ext Tooth Lock Washer, 3/8	per SAE AMS QQ-P-416						2
14	MS51831-111	Key Locked Insert, 1"-8 Thread	per SAE AMS 2700						16

· ASME Standard B.18.24, Part Identifying Number (PIN) Code System Standard for B18 Fastener Products

· ASME B18.2.1-2012, Square, Hex, Heavy Hex, and Askew Head Bolts and Hex, Heavy Hex, Hex Flange, Lobed Head, and Lag Screws (Inch Series)

· ASTM B633, Standard Specification for Electrodeposited Coatings of Zinc on Iron and Steel

· ASTM B849-02, Pre-Treatment of Iron or Steel for Reducing Risk of Hydrogen Embrittlement

· ASTM B850-98, Post-Coating Treatments of Steel for Reducing the Risk of Hydrogen Embrittlement

· ASME B18.24-2015, B18 Fasteners

· ASTM-A574-17, Screws, Cap, Allow Steel, Socket-Head

ASTM-B633, Type II, SC 2 Zinc Plate, Zinc on Iron and Steel, Electrodeposited Coatings

The contractor shall use National Aerospace & Defense Contractors Accreditation Program (NADCAP) approved suppliers for the ASTM B633/F1941/F1941M zinc plating, and also the ASTM B849/850 heat treatment.

File details come from the government source that posted it.