W15QKN16Q0057-0002.pdf

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 1. Contract ID Code Page Of

2. Amendment/Modification No.

3. Effective Date

4. Requisition/Purchase Req No.

5. Project No. (If applicable)

6. Issued By Code 7. Administered By (If other than Item 6) Code

8. Name And Address Of Contractor (No., Street, City, County, State and Zip Code)

9A. Amendment Of Solicitation No.

9B. Dated (See Item 11)

10A. Modification Of Contract/Order No.

10B. Dated (See Item 13) Code Facility Code

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

The above numbered solicitation is amended as set forth in item 14. The hour and date specified for receipt of Offers is extended, is not extended.

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing items 8 and 15, and returning ____________ copies of the amendments: (b) By acknowledging receipt of this amendment on each copy of the offer submitted; or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. Accounting And Appropriation Data (If required)

13. THIS ITEM ONLY APPLIES TO MODIFICATIONS OF CONTRACTS/ORDERS

It Modifies The Contract/Order No. As Described In Item 14.

A. This Change Order is Issued Pursuant To: The Changes Set Forth In Item 14 Are Made In

The Contract/Order No. In Item 10A.

B. The Above Numbered Contract/Order Is Modified To Reflect The Administrative Changes (such as changes in paying office, appropriation data, etc.) Set

Forth In Item 14, Pursuant To The Authority of FAR 43.103(b).

C. This Supplemental Agreement Is Entered Into Pursuant To Authority Of:

D. Other (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return _______________ copies to the Issuing Office.

14. Description Of Amendment/Modification (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

Except as provided herein, all terms and conditions of the document referenced in item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. Name And Title Of Signer (Type or print)

16A. Name And Title Of Contracting Officer (Type or print)

15B. Contractor/Offeror 15C. Date Signed 16B. United States Of America 16C. Date Signed

By (Signature of person authorized to sign) (Signature of Contracting Officer)

NSN 7540-01-152-8070

PREVIOUS EDITIONS UNUSABLE

30-105-02 STANDARD FORM 30 (REV. 10-83)

Prescribed by GSA FAR (48 CFR) 53.243

SEE SCHEDULE

X

Firm Fixed Price

0002 2016MAR30

W15QKN

ARMY CONTRACTING COMMAND - NJ

PICATINNY ARSENAL, NJ 07806-5000

TRISHA FITTON

EMAIL: TRISHA.A.FITTON.CIV@MAIL.MIL

W15QKN-16-Q-0057

2016MAR03

X

X 2016APR11 03:00pm

/SIGNED/

2 signed

SEE SECOND PAGE FOR DESCRIPTION

1 3

CONTINUATION SHEET

Reference No. of Document Being Continued Page of

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

SUPPLEMENTAL INFORMATION

Buyer Name: TRISHA FITTON

Buyer Office Symbol/Telephone Number: ACC-NJ-MA/(973)724-1936

Type of Contract 1: Firm Fixed Price

Kind of Contract: Supply Contracts and Priced Orders

*** End of Narrative A0000 ***

The purpose of this amendment is to:

(1) Answer the following questions submitted by industry:

Q: SOW paragraph 3.3.1.2 indicates that "The contractor shall review the existing ESS procedures and shall submit any revisions and an

ESS implementation plan within thirty (30) days after award of contract." Please provide the current ESS procedures.

A: Procedures for ESS and revision submital can be found in MIL-HDBK-2164A referenced in para 3.3.1 of the Statement of Work.

Q: Regarding TR7625850 ATP, Section 1.5.5 - What is this discrete adapter cable and what is it used for?

A: The discrete adapter cable is used for step 52B to connect an external 28VDC source to A28J3 of the cabinet under test.

Q: Regarding TR7625850 ATP - Will the government provide the programs listed in Section 1.6?

A: Yes, these are the software referenced in paragraph 4.1.1 of the SOW.

Q: Regarding TR7625850 ATP, Section 2.0.c - Which jumper setting allows PPCBug to operate?

A: Jumper settings for the processor CCAs will be included in the software installation procedures.

Q: Regarding TR7625850 ATP, Section 2.0.d - What is the process to install the software on these items?

A: Procedures will be provided with the software. The software and installation procedure are in the process of being revised to accommodate the changed parts and are not yet available.

Q: Regarding TR7625850 ATP, Section 2.0.e - Are these configuration files provided with the purchased hardware? If not, are they GFE?

A: The configuration files are included with the above software.

Q: Regarding TR7625850 ATP, Section 2.0.j - What are Geographic card plugs and where are they installed? Are these GFE? What are Hull

ID plugs and where are they installed?

A: The hull ID plug is the only card plug used in this cabinet variant. It is a simple 15-pin D-sub type plug installed at A1J125.

(2) The following Distribution D drawings/documents are available:

7402588 STIFFENER

7402667-2 SLIDE PIN

7244929 BAR

7250920 referenced in Note 2 of drawing 7625810

To obtain these documents, Contractors are required to submit an AMSTA-AR 1350 Technical Data Request Questionnaire, a DD 2345 Military

Critical Technical Data Agreement, and a fully executed Non-Disclosure and Non-Use Agreement all of which are included as attachments to the Request for Quotation (RFQ). The Handling/Destroying of Unclassified/Limited Distribution documents shall be handled using the same standard as "For Official Use Only (FOUO)" material, and shall be destroyed by any method that will prevent disclosure of contents or reconstruction of the document.

Technical data that is export-controlled must be marked with the following destruction notice:

DESTRUCTION NOTICE For classified documents, follow the procedures in DoD 5220.22-M, Industrial Security Manual, Section 11-19 or DoD

5200.1-R, Information Security Program Regulation, Chapter IX. For unclassified, limited documents, destroy by any method that will prevent disclosure of contents or reconstruction of the document.

All technical documents that are determined to contain export-controlled technical data shall be marked WARNING - This document contains technical data whose export is restricted by the Arms Export Control Act (Title 22, U.S.C., Sec 2751, et. seq.) or the Export

2 3

W15QKN-16-Q-0057 0002

CONTINUATION SHEET

Reference No. of Document Being Continued Page of

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

Administration Act of 1979, as amended, Title 50, U.S.C., App. 2401 et. seq. Violations of these export laws are subject to severe criminal penalties. Disseminate in accordance with provisions of DoD Directive 5230.25. When it is technically infeasible to use the entire statement, an abbreviated marking may be used, and a copy of the full statement added to the Notice To Accompany Release of

Export-Controlled Data required by DoD Directive 5230.25.

*** END OF NARRATIVE A0003 ***

3 3

W15QKN-16-Q-0057 0002

SUPPLEMENTAL INFORMATION