Vertical Lift and Scissor Lift Purchase Requirement.pdf
PDF 99 KB Posted
- Attached to
- Vertical and Scissor Lift Purchase Order Federal contract opportunity
- Solicitation number
- SP4705-25-Q-0004
- Issued by
- Defense Logistics Agency
About this file
This document is a Vertical Man Lift and Scissor Lift Purchase Requirement specification detailing precise technical requirements for two pieces of equipment to be procured by DS Installation Support at Fort Belvoir. The vertical man lift specifications include a 30ft working height, 20ft platform height, 350lbs lift capacity, 24V power source, and multiple safety features such as dual wheel brakes, tilt alarm, motion alarm, and onboard diagnostic system. The scissor lift requirements specify a 30ft elevated platform height, 500/800lbs platform capacity, 24V electric drive, and a zero inside turning radius.
The procurement is structured as a 100% Small Business Set-Aside under NAICS code 333924, with a small business size standard of 900 employees. The solicitation (SP4705-25-Q-0004) is issued by the Defense Logistics Agency as a combined synopsis/solicitation for commercial products, seeking a complete vertical man lift and scissor lift package that includes a one-year warranty. The document also highlights relevant OSHA and ANSI safety standards that must be met, including specific scaffolding and elevating aerial platform regulations to ensure worker protection and equipment compliance.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| SP470525Q0004 Combined Synopsis Solicitation and Instructions to Quoters.pdf | ||
| Attachment II Pricing Schedule.xlsx | XLSX spreadsheet |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Vertical Man Lift and Scissor Lift Purchase Requirement
This requirement is to purchase a new vertical lift and scissor lift.
1. New Vertical Man Lift Manually Pushed Around and Vertical Lift.
Working Height: 30ft.
Platform Height: 20ft.
Platform Dimensions: 26”x20”.
Height Stowed: 6ft.
Length Stowed: 4ft.
Width: 3ft.
Ground Clearance 3in.
Lift Capacity: 350lbs.
Lift Capacity-Extension Deck 250lbs.
Drive Speed: 2.5mph.
Drive Speed: Raised: .5mph.
Turning Radius Outside: 5ft.
Power Source: 24V(Four 6V 225 Ah Batteries) Hydraulic System Capacity: 8.33L 2.2gal.
Weight; 2,451lbs.
Fully proportional lift and drive controls.
Battery charge indicator.
Onboard diagnostic system.
Tilt alarm.
Zero inside turning radius.
Dual wheel brakes.
Hydraulic brake release.
Pothole protection.
Hinged rear ABS covers for easy access to all major electrical and hydraulic components.
Tie down attachment points.
Overhead crane attachment point.
Large forklift pockets access.
Non-marking solid tires.
Dual flashing beacons.
Motion alarm.
Automotive horn.
Descent alarm.
1. New Scissor Lift Platform Height-Elevated 30ft.
Platform Capacity: 500/800lbs.
Platform Extension: 50in.
Platform Size: 30x74in.
Overall Width: 46in.
Overall Length: 8ft.
Capacity on Platform Extension: 250lbs.
Lift/Lower Time: 41/50 Seconds.
Ground Clarence: 5in.
DS INSTALLATION
SUPPORT FORT
BELVOIR
Headquarters Complex 8725 John J. Kingman Road Fort Belvoir, VA 22060
Ground Bearing Pressure: 90psi.
Drive Speed-Elevated: .5mph.
Drive Speed-Lowered: .5mph.
Gradeability: 25%.
Turning Radius (Inside): Zero.
Turning Radius (Outside): 95in.
Power Source: Batteries 4x6V. 220 amp-hr.
Charger: 20 amp Drive: 24V Electric 8hp.
Hydraulic Reservoir Capacity: 1.25gal Pump: Fixed Displacement Gear.
SAFETY and STANDARDS
Single Man Lifts and Scissor Lifts are covered under OSHA’s Scaffolding standard and The American National Standards Institute (ANSI) has standards for manufacturing, owning and operating scissor lifts.
They can be found in ANSI A92.3-2006 (Manually Propelled Elevating Aerial Platforms), A92.6-2006 (Self-Propelled Elevating Work Platforms), and OSHA standards (29 CFR) to protect workers from hazards associated with scissor lifts
1910.27 – Scaffolds and rope descent systems 1910.28(b)(12) – Duty to have fall protection and falling object protection 1910.29(b) (Note) – Fall protection systems and falling object protection-criteria and practices
1915.71 – Scaffolds or Staging 1926.20(b) – Accident prevention responsibilities
1926.21 – Safety training and education
1926.451 – General requirements 1926.452(w) – Additional requirements applicable to specific types of scaffolds - mobile scaffolds.
File details come from the government source that posted it. Updated .