Vendor checklist B54898 Excavator Specs.docx

DOCX document 19 KB Posted

Attached to
DNR - Heavy Duty Forestry Grade Excavator - W99R
Solicitation number
27-422DNR-RESCO-B-54898
Issued by
St. Clair County, Illinois

About this file

This is a vendor specification checklist prepared by the Illinois Department of Natural Resources (IDNR) for the procurement of heavy equipment to support the Division of Wildlife. The procurement requires one mid-size, low ground pressure hydraulic forestry grade excavator, fully assembled and ready for use upon delivery. The excavator must be equipped with a forestry package including a 24-inch heavy duty bucket with hydraulic thumb, forestry roof guard, forestry front cab guard, and a FAE 100cc Professional Bite 40-inch mulching head with mounting cap. The equipment must also be compatible with a rotary mower attachment having a minimum 40-inch cutting width and minimum 4-inch stem cutting capacity. No specific response date, due date, site visit, bidder's meeting, award date, or contract term is identified in this specification document.

The document establishes comprehensive technical requirements across multiple categories including engine specifications (diesel, turbocharged, minimum 65 hp gross, Final Tier 4 EPA certified), cooling systems (reverse hydraulic fan, specific fin ratings, antifreeze protection), electrical components (900 CCA minimum batteries, 60-amp alternator), powertrain and undercarriage (2-speed capable, ground pressure not exceeding 6 lbs. psi, rubber crawler pads), hydraulic systems (open center load sensing, specified flow rates and pressures), and operating station features (ROPS/FOPS certified enclosed cab with heating/air conditioning, rear camera, AM/FM radio). Operating performance requirements include minimum swing speed of 10 rpm, arm length of 6.5 feet, digging force of 7,500 lbs., bucket digging force of 13,000 lbs., maximum reach of 22 feet, and digging depth capability of 15 feet. No pricing information, set-asides, incumbent data, or funding sources are specified in this vendor checklist.

View the file

Other files

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

1. DESCRIPTION OF SUPPLIES AND SERVICES

1.1. GOAL: The Illinois Department of Natural Resources (IDNR) requires one (1) heavy duty, low ground pressure hydraulic forestry grade excavator for use by IDNR Division of Wildlife. Each excavator shall be fully assembled and ready for use upon delivery.

1.2. SUPPLIES AND/OR SERVICES REQUIRED:

One (1) Mid-size, Low Ground Pressure Hydraulic Forestry Grade Excavator with the following specifications:

Forestry package:

24 in heavy duty bucket with hydraulic thumb installed. Forestry roof guard.

Forestry front cab guard.

FAE 100cc Professional Bite 40” mulching head. Mounting cap for mulching head.

Does Vendor meet all requirements:

Comments:

Rotary Mower Attachment:

Compatible for use with supplied excavator.

Minimum 40” cutting width. Minimum stem cutting capacity 4”.

Does Vendor meet all requirements:

Comments:

Engine:

Fuel – Diesel.

Turbocharged with minimum of 65 hp gross Meets or exceeds Final Tier 4 EPA certification. Engine block heater.

Engine oil and filter change interval shall be no more than 500 hours. Severe duty air, fuel, and oil filters. Fuel water separation capable. Fuel tank capacity 30 gallons minimum

Does Vendor meet all requirements:

Comments:

Cooling:

Reverse hydraulic fan system.

Radiator, hydrostatic cooler, and turbo aftercooler shall all be rated at no more than

10.2 fins per inch.

Fan shall be enclosed by a fan guard.

Radiator shall be filled with manufacturers approved anti-freeze solution that provides protection to at least negative thirty-four degrees Fahrenheit (-34 F") (-37 C°).

Does Vendor meet all requirements:

Comments:

Electrical:

Batteries shall have a minimum CCA rating of 900 Alternator shall be a minimum of 60 amps.

Does Vendor meet all requirements:

Comments:

Powertrain and Undercarriage:

2-speed capable with minimums of 1.5 mph in low range and 2.6 mph in high range. Automatic shift.

2-way backfill blade with lift height of no less than 15”. Motor and undercarriage shields.

Triple Flanged Track Rollers.

Ground pressure not to exceed 6 lbs. psi.

Sealed and lubricated rollers, idlers, and hydraulically adjusted track chain. Rear hydraulics.

Rubber crawler pads. Automatic propel brake.

Does Vendor meet all requirements:

Comments:

Hydraulic System:

Open center, load sensing.

Short stroke, low effort controls with shutoff lever.

3 variable-displacement axial piston with maximum flow of 2x19+15 gpm.

Auxiliary Hydraulics:

Primary - 25 gpm maximum at 3,000 psi. Secondary - 16 gpm maximum at 3,000 psi.

5,000 hr. minimum hydraulic oil change interval.

Hydraulic cylinder rods must be heat-treated, chrome-plated, polished, with hardened steel pivot pins with replaceable bushings.

Does Vendor meet all requirements:

Comments:

Operating Dimensions and Performance:

Swing speed of no less than 10 rpm and a minimum torque of 12,000 lb.-ft.

Arm length of no less than 6.5’ and digging force of 7,500 lbs. Arm swing radius of no less than 6’.

Bucket digging force of at least 13,000 lbs.

Maximum reach of at least 22’.

Must be capable of digging to a depth of 15’.

Must be capable of cutting and dumping to heights of 22’ and 16’, respectively.

Does Vendor meet all requirements:

Comments:

Operating Station:

Enclosed operator station shall be ROPS/FOPS certified. One-year software upgrades shall be included.

Operator's seat shall have adjustments for height, weight, and leg reach. Instrumentation shall include dash mounted gauges. Display shall include transmission temperature, engine coolant temperature, engine oil pressure, fuel, voltage, and hour meter as a minimum.

Cab shall include heating and air conditioning with a minimum of one fresh air filter. AM/FM radio installed.

Rear camera installed.

Does Vendor meet all requirements:

Comments:

File details come from the government source that posted it. Updated .