Valley Hi Statement of Need 25 June 2026_Final.pdf

Statement of Need – 502 Communications Squadron JBSA-Lackland SCOW

1.0 General Information.

1.1 Scope: The contractor shall provide and deliver all necessary materials, equipment, and consumables specified. No installation, testing, splicing, or site preparation services are required under this SOW. The primary objective is strictly the procurement and delivery of materials. All materials must be "brand name or equal" and meet or exceed the salient characteristics listed in the requirement.

1.2 Background: The 502 Communication Squadron is in dire need of the list of material below. The material is for the relocation of the government infrastructure in the pathway in support of a city project.

1.3 Essential / Salient Characteristics:

All materials below Brand Name, therefore all items must meet the salient characteristic.

PART NUMBER MANUFACTURE/Part Name SALIENT CHARACTERISTIC QUANTITY

DB-600P24-AL-

89-ESS-CUT

REEL

Superior Essex - 600 Pair 24 Gauge Copper Cable

Copper Cable, 24 AWG, Shielded, Polyethylene, 600, Black (Jacket), 1250 Feet per Reel, Inhibits Corrosion, Moisture-Resistant

2000 FT

288EU4-

T4700D20

Corning - Fiber Optic Cable, Black, Singlemode (OS2), 288 Fiber

Corning ALTOS® cable with Fast Access® technology is an all-dielectric gel-free cable designed for outdoor and limited indoor use for campus backbones in lashed aerial and duct installations. The innovative Fast Access technology feature combined with the all-dielectric gel-free loose tube design simplifies removal of the cable jacket reducing cable end access time by at least 50 percent. Equally important is the overall reduction in risk of inadvertent fiber damage and risk to installers from sharp cable access tools. The cable is fully water blocked using craft-friendly, water-swellable materials, which means no clean up is required. The flexible buffer tubes are easy to route in closures, and the SZ-stranded, loose tube design isolates fibers from installation and environmental rigors while allowing easy mid-span access. The all-dielectric gel-free cable construction requires no bonding or grounding, and these cables have a medium-density polyethylene jacket that is rugged, durable and easy to handle.

5500 FT

072EU4-

T4700D20

Corning - ALTOS® Loose Tube, Gel-Free, All-Dielectric Cable with FastAccess® Technology 72 F, Single-mode (OS2)

Corning ALTOS® cable with FastAccess® technology is an all-dielectric gel-free cable designed for outdoor and limited indoor use for campus backbones in lashed aerial and duct installations. The innovative Fast Access technology feature combined with the all-dielectric gel-free loose tube design simplifies removal of the cable jacket reducing cable end access time by at least 50 percent. Equally important is the overall reduction in risk of inadvertent fiber damage and risk to installers from sharp cable access tools. The cable is fully water blocked using craft-friendly, water-swellable materials, which means no clean up is required. The flexible buffer tubes are easy to route in closures, and the SZ-stranded, loose tube design isolates fibers from installation and environmental rigors while allowing easy mid-span access. The all-dielectric gel-free cable construction requires no bonding or grounding, and these cables have a medium-density polyethylene jacket that is rugged, durable and easy to handle. A variety of fiber types are available including

62.5 µm and 50 µm, single-mode and hybrid versions, as well as fibers

4144 FT

with Gigabit and 10Gigabit Ethernet performance.

The part number 072EU4- T4700D20 refers to Corning ALTOS® Loose Tube, Gel-Free, All-Dielectric Fiber Optic Cable (OS2, 72 Fiber). To qualify as an "or equal" substitute, an alternative must be an outdoor, all-dielectric loose-tube cable containing 72 single-mode (OS2) fibers organized in dry, gel-free buffer tubes. It must feature water-swellable dry tape, a rugged polyethylene jacket designed for duct or aerial installations, and comply with Telcordia GR-20 performance standards.

CCH-04U

Corning - Closet Connector Housing (CCH) Four Rack Units, holds 12 CCH Connector Panels

Closet connector housings (CCHs) provide interconnect or cross-connect capabilities between outside plant, riser or distribution cables and opto-electronics. Like other LANscape solutions hardware, the housings accept CCH connector panels. In addition, the housings accept CCH cassettes and CCH modules.From fiber and cable routing and strain relief, to port labeling and termination, these housings reduce the risk of error that can disrupt networks. The units are

2 EA

designed for rack mounting in 19-in (48 cm) racks or optional 23-in (58

cm) equipment racks (1.75-in EIA hole spacing). They are available in rack space options of 1U (two panels, cassettes or modules), 2U (four panels, cassettes or modules), 3U (six panels, cassettes or modules) and 4U (12 panels, cassettes or modules). The 1U, 2U and 3U options feature a slide-out tray and see-through, removable top covers.

The CCH-04U features a clear door, removable front and rear enclosures and a platinum-colored interior for maximum visibility and access.Every CCH housing is shipped complete with strain relief brackets, routing clips and guides, and mounting brackets for proper installation.

Documentation labels are provided and components can be added as needed to construct a fiber distribution frame for any application. All housings include a removable tinted polycarbonate front door.

CCH-CS24-A9-

P00RJ

Corning - CCH SPL CASSETTE SM 24F

LC-DUPLEX RIB

Closet Connector Housing (CCH) pigtailed splice cassettes enable faster field splicing and easy modular management of connectorization within the housing.

They are preloaded and pre-routed for quick fusion splicing of either individual or ribbon fiber pigtails, using the same space-saving platform as the standard CCH splice cassette. The pre-routed pigtailed cassettes reduce field labor by streamlining features and components to allow for efficiencies in the field. They are prepped with a 2 m pigtail assembly with all pre-existing CCH panel connector options. The pigtailed cassettes have colored 250 µm for ease of splicing.

They also enable strain relief to be pre-applied to the assemblies from the manufacturing facility. With the pigtailed cassette, individual splice tray or separate splice housings are eliminated, allowing splicing to be done away from the rack housing in more convenient workspaces. The modular design makes it easy to access the fiber in an individual cassette without disturbing the other fibers in the housing. Each cassette is shipped with the pigtailed CCH adapter panel of the customer’s

26 EA

choice, one rail for use with CCH- 01U/2U/3U housings, and two rails used with CCH-04U housings.

Grommets and cable ties for additional strain relief and protective braided tubing for incoming cables are also included. Splicing cassettes ship with the appropriate quantity and type of heat-shrink splice protectors.

8003691 PLP - Coyote Silicone Grommet kit(10.2- 15.2)

COYOTE Grommet Kit contains 1-entry grommet, (0.40 in. to 0.60 in.), one cable measure tape, two silicone lubricant packs, two sets of plugs and one plastic glove.

4 EA

8003692 PLP - Coyote Silicone Grommet Kit(15.2- 21.6)

Part number 8003692 refers to the Preformed Line Products (PLP) COYOTE® 1-Hole Silicone Grommet Kit. To qualify as an "or equal" substitute, an alternative must be a weather-resistant silicone grommet designed to seal a single fiber optic cable with a diameter of 0.60 to 0.85 inches, provide compatibility with PLP COYOTE closure systems, and meet GR-771- CORE standards for environmental sealing.

4 EA

8006878

PLP - COYOTE Dome Closure for buffer tube (loose tube) applications - 6.5 in.x 22 in.

(165 mm x 589 mm)

The part number 8006878 refers to the Preformed Line Products (PLP) COYOTE® 6.5" x 22" Dome Closure Kit for Ribbon/Unitube Fiber Applications. To qualify as an "or equal" substitute, an alternative must be a re-enterable, hermetically sealed butt-splice dome enclosure (approx. 8.6" W x 22.6" L) designed with an organizer optimized for unitube/ribbon fiber storage and a 4-port segmented end plate supporting up to 648 ribbon splices. The kit must include two 0.40"–0.60" and two 0.60"–0.85" 1-hole grommets along with transit/transition tubing, and it must meet Telcordia® GR-771- CORE and IP-68 requirements for direct buried, underground, or aerial installations.

4 EA

LGSTR144

PLP - COY RIB

LITE-GRIP

TRAY (SHORT)

The part number LGSTR144 refers to the Preformed Line Products

(PLP) COYOTE® LITE-GRIP®

Short Deep Profile Splice Tray Kit.

To qualify as an "or equal" substitute, an alternative must be a compact, deep-profile fiber splice tray equipped with four elastomer splice blocks capable of securing up to 144 ribbon/mass fusion splices. It must be fully compatible with PLP COYOTE

8 EA

closure systems and feature a flexible, slip-resistant grip design that safely secures standard ribbon splice protectors without damaging the optical fibers.

8006367 PLP -ARMADILLO Stainless Filling Flange Kits with Drillable End Plates - 6.5" x 38"

The part number 8006367 refers to the Preformed Line Products (PLP) ARMADILLO® Stainless Steel Splice Case with Filling Flange. To qualify as an "or equal" substitute, an alternative must be a re-enterable stainless steel splice enclosure designed for copper networks. It must feature an integrated bonding/grounding system, a filling flange/port for encapsulant compound injection, and utilize customizable drillable end plates rated for aerial, underground, or direct buried environments.

3 EA

All materials below are “brand name or equal”, therefore all items must meet the salient characteristic.

PART NUMBER Brand Name or Equal SALIENT CHARACTERISTIC QUANTITY

88-SUPER-

3/4X66FT

3M 88-SUPER-3/4X66FT Tape, Electrical, 66 ft., 3/4 in

The part number 88-SUPER- 3/4X66FT refers to 3M Scotch® Super 88™ Premium Vinyl Electrical Tape ( ). To qualify as an acceptable "or equal" substitute, an alternative must be a heavy-duty 8.5-mil thick PVC tape (not standard 7-mil) rated for 600V, with a dielectric strength of 10,000V, an all-weather temperature range of to , and certified under UL 510 and CSA C22.2 for flame, UV, and moisture resistance.

20 EA

MXED64283GR2650

MaxCell® Edge Detectable Series MXED64283-GR2650 Cable Protection

Tube, 3 in, 2650 ft L, Nylon/PET

The part number MXED64283GR2650 refers to a 2,650-foot reel of MaxCell® Edge Detectable 3-Inch, 3-Cell Flexible Fabric Innerduct (Green).

To qualify as an "or equal" substitute, an alternative must be a flexible, three-cell PET/Nylon fabric innerduct designed for conduits with a minimum 3-inch inner diameter, supporting up to 1.05-inch cable diameters per cell.

It must include an integrated 18

6000 FT

AWG solid copper tracer wire for underground utility location, pre-lubricated cells with color-coded 1,250 lb pull tapes, and a high melting point of for durability during high-tension cable pulling.

PST-FO

PST-FO Self-Lam marker tag, Vinyl, Yellow/Black, 2"x3.5", PK1

The part number PST-FO refers to the Panduit® Self-Laminating Fiber Optic Cable Marker Tag. To qualify as an "or equal" substitute, an alternative must be a durable, non-adhesive rigid vinyl tag measuring approximately 3.5" x 2" with pre-cut slots for cable tie mounting. It must feature a high-visibility yellow and black pre-printed legend "CAUTION

/ FIBER OPTIC CABLE /

TYPE_____ /

COUNT_____" protected by an integrated clear self-laminating cover, and be rated for both indoor and outdoor UV-resistant use up to 176°F (80°C).

15 EA

TZE231

~1/2in x 26.2ft (12mm x 8m) Black on

White Standard Adhesive Laminated Tape

This 0.47in (12mm) black on white tape features our exclusive laminated tape process and our standard adhesive. Ideal for everyday applications and can withstand hot and cold environments, as well as chemical and moisture exposure.

Best suited for smooth, flat surfaces.

26.2ft (8m) of tape per cassette. 1 cassette per carton. For use with all P-touch label printers.

5 EA

S-5835 Black UV Stabilized Nylon Cable Ties -

14", 120 lb

Tamperproof ties secure bags, cords and cables permanently.

Approved for outdoor use.

UL Listed 6.6 nylon.

Locks tightly - Won't stretch or slide.

Temperature range -40° to 185°F.

3 EA

S-12397 Black UV Stabilized Nylon Cable Ties -

24", 120 lb

Tamperproof ties secure bags, cords and cables permanently.

Approved for outdoor use.

UL Listed 6.6 nylon.

Locks tightly - Won't stretch or slide.

Temperature range -40° to 185°F

3 EA

S003027 Splice Protection Sleeves

AFL offers a wide selection of fiber protection sleeves to meet any application. The FP-03 series is the industry standard for durable and lasting protection of single fiber splices in field installations, while the FP-04(T)/05 provide these same performance levels for 8/12 fiber ribbon respectively. The FPS01 and

150 EA

FPS04 series are specially designed for optical components, where small packaging is a priority. These micro sleeves provide the known reliability of Fujikura sleeves in the smallest possible lengths. This easy and cost effective method is a great alternative to recoating. The FPS01 and FPS04 series offer a wide range of options to accommodate various coating sizes, and are manufactured in a variety of lengths. This gives great flexibility in designing optical modules.

61244 PT Technologies 61244 D'GEL Cable Gel

Solvent Wipes, 144/Case

The part number 61244 refers to ITW Pro Brands D'GEL® Cable Gel Solvent Wipes. To qualify as an "or equal" substitute, an alternative must be an individually packaged, extra-large ( ) presaturated wipe designed to remove cable gels (icky-pic), grease, and oils from copper or fiber optic cables. The water-free solvent formula must leave zero residue, feature a flashpoint above , and be fully compatible with standard cable insulations, plastics, and metallic components.

2 EA

FW-50

Jonard FW-50 - Fiber Wipes, Wet, Pack of

Made with 91% isopropyl alcohol and 9% deionized water, these fiber cleaning wipes are perfect for cleaning optical surfaces, bare fiber, and connector ends quickly and easily. Suggested applications include the removal of dust, dirt, and magnetic oxide buildup.

Nonabrasive and residue-free solvent cleans efficiently and evaporates quickly Single-use lint-free pad ensures no cross contamination Compatible with most plastics, glass, and metals Contains (50) fiber wipes

7 EA

8500-05-0001MZ

AFL 8500-05-0001MZ - One-Click Cleaner

SC, ST, FC

One-Click Cleaners are an easy-to-use option for cleaning connectors on jumpers and in adapters. Simply insert the One-Click Cleaner into an adapter and push until an audible "click" is heard. The One-Click Cleaner uses the mechanical push action to advance an optical grade cleaning tape while the cleaning tip is rotated to ensure the fiber end-face is effectively, but gently cleaned.

The One-Click Cleaner is a must-have for every field technician because it is small enough fit in a shirt pocket. It also makes a great addition to cleaning kits.

6 EA

There are several types of One-Click Cleaners for the various plug and socket styles, including Outdoor Connector (ODC) plug and socket styles, the ODC One-Click Cleaner, which cleans the ferrules in ODC plug, socket and 1.25 mm ferrules, is an essential cleaning tool for WiMax Base Station, Fiber-to-the-Antenna, Broadcasting and Surveillance Video technicians.

31-605

DUCT SEAL COMPOUND 5LB BLOCK,

PERM. SOFT, NON-TOXIC

Ideal duct seal in dark gray putty color is ideal for sealing metal, masonry, wood or plastic.

12 EA

C2031132

HOOK CABLE

RACK 7.50 INCH

Cable Rack, Cable Rack Hook, 7.5 in

20 EA

710-SC1-25

3M710-SC1-25

SPLICE CONN

STRAIGHT

This Straight Splice Connector Filled can accommodate 26 to 24 AWG sizes and can create a straight or through splice in the wire. The plastic skirt protects cut ends of conductors from moisture

96 EA

HTC-D72

Grime-Away™ Multi-Purpose Cleaning Wipes, 10" x 12" - 72 per Dispenser

Multi-Purpose Cleaning Wipes, Grime-Away, Dimensions: 10" x 12", Includes: (72) Wipes with Dispenser

8 EA

4436 Tape, Measuring-1800# Polyester

Application : For Easily Pulling And Installing Wire And Fiber Optic Cables Within PVC And HDPE Ducts; Length : 3000.000 FT (914.000 M); Material : High Strength Polyester; Tensile Strength : 1800.000 LB (8.010 KN) Average Breaking Strength; Type : Dur able, Stretch Resistant; Weight : 31.200 LB (14.200 KG); Width : 5/8 IN

(15.900 MM)

3 EA

MXCSW600

BALL-BEARING INSTALLATION

SWIVEL LOAD CAPACITY 600LBS

The part number MXCSW600 refers to the MaxCell® Ball-Bearing Installation Swivel (600 lbs). To qualify as an "or equal" substitute, an alternative must be a reusable underground cable-pulling swivel precision-machined from high-strength, corrosion-resistant stainless steel with a maximum outer diameter of 0.625 inches and a rated load capacity of 600 lbs (272 kg). It must feature a ball-bearing design for smooth rotation under load, a replaceable clevis pin for quick utility connections, and be sized to prevent binding while pulling fabric

1 EA

innerduct or fiber cabling through tight conduit networks.