VACIS Radioactive Removal Q&A v2.pdf
PDF 267 KB Posted
- Attached to
- VACIS Radioactive Material Removal and Disposal
- Solicitation number
- 24-494DOT-FINAD-B-43432
- Issued by
- St. Clair County, Illinois
About this file
This document is a Q&A for the Illinois Department of Transportation's contract opportunity B-43432 for the removal and disposal of VACIS radioactive material. The vendor must be an Illinois Emergency Management Agency and Office of Homeland Security (IEMA-OHS) registered low-level radioactive waste (LLRW) broker. The key details include the serial numbers (69190G, 69205G), starting activities (915-920 mCi), date of manufacture (March 2019), and manufacturer details (VEGA Americas SO 6300259) of the two radioactive devices. The dimensions of the source enclosures are 26"L x 17"W x 24"H, and the approximate weight of each device is 450 lbs.
The contract opportunity is open to vendors in the state of Illinois, specifically Sangamon County. Pricing terms, set asides, incumbent information, and funding details are not provided in this Q&A document. The vendor must be registered with IEMA-OHS at the time of bid submission.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Standard Terms and Conditions ~90.pdf | ||
| VACIS Radioactive Removal Contract v.23.3~1.docx | DOCX document | |
| VACIS Radioactive Removal Q&A v1~1.pdf | ||
| standard-illinois-certifications-v.23.1~49.docx | DOCX document |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Illinois Department of Transportation B-43432 Q&A v2
Questions and answers:
1. Serial numbers of both devices 69190G, 69205G
2. Starting activities in mCi of each source 915-920 mCi
3. Date of manufacture for each source It appears to be March 2019
4. Manufacturer ID and Model Number of each source VEGA Americas SO 6300259, Model #:
unsure
5. Approximate dimensions of the devices in inches exact size unknown but less than a few inches
6. Pictures of each source if possible The source is housed in a lead lined box, so it cannot be seen.
Below is a photo of the housing.
Questions and answers #2:
I was not asking for the dimensions of the sources within the devices, but the devices themselves. I can tell from the picture it’s fairly large, so could the end user please provide the following information:
1. Dimensions of each device (not the source inside the device, but the housing). Source Enclosure: 26”L x 17”W x 24”H
2. The approximate weight in pounds of each device. 450 lbs
Image below:
Illinois Department of Transportation B-43432 Q&A v2
File details come from the government source that posted it. Updated .