UPS_Combined_Solicitation_Synopsis.pdf

Uninterruptible Power Supply [UPS] Replacement

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Federal Acquisition Regulation (FAR) Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written combine/solicitation will not be issued. Combined synopsis/solicitation N6134022Q0007 is issued as a Request for Quote (RFQ) and incorporates the provisions and clauses in effect from regulations posted to https://www.acquisition.gov inclusive, but not limited to, Federal Acquisition Circular (FAC) 2022-06 published on 01 May 2022.

The anticipated North American Industry Classification System (NAICS) Code for this requirement is 335999 (All Other Miscellaneous Electrical Equipment and Component Manufacturing) with a business size of 500 employees. The Product Service Code (PSC) for this procurement is 6150. This procurement will be awarded as a Total Small Business Set-Aside using the Simplified Acquisition Procedures (SAP) outlined in FAR Part 13. Naval Air Warfare Center Training Systems Division (NAWCTSD) in Orlando, Florida intends to issue a Firm Fixed Price (FFP) purchase order. Interested sources are encouraged to submit a quote. All information shall be furnished at no cost or obligation to the Government.

Below is a description of the requirement:

NAWCTSD, Aviation Support Contracts Department (Code GT25000), Orlando, FL has a requirement for the delivery, installation, and testing of an Uninterruptible Power Supply (UPS) to the Air Traffic Control (ATC) School located at the Naval Air Station (NAS) Pensacola, Florida. The current ATC power system is supported by one UPS unit that provides conditioned power to Device 15G30, Advanced Shipboard Air Traffic Control Training System (ASATS); Device 15G36, Fundamentals Lab; Device 15G34, Tower Simulator System (TSS); and Device 15G31, Shore based ATC Training System (SATS). The new single UPS system shall provide conditioned power and power back-up support to the same four systems.

The UPS unit shall provide power conversion and conditioning as well as back-up power for trainer shut-down upon loss of building power. The UPS unit shall provide power to Dv 15G30, Dv 15G31, DV 15G34, and Dv 15G36 only (i.e. building lighting, HVAC, office equipment, etc. will not be connected to the UPS).

The UPS shall be installed in the Computer Room of the ATC School. No forklift will be provided, so a truck with a lift gate is required for equipment delivery.

The UPS shall convert 480V 3-phase power to 120/208V 3-phase power with a minimum capacity of 80 kVA and 64 KWatts. The UPS shall provide a minimum backup time of 15 minutes at 60 kVA. The power supplied to the ATC School trainers shall be conditioned to remove noise and power spikes and surges.

The UPS shall have a by-pass mode to allow for maintenance of the UPS unit without cutting power to the ATC trainers.

The UPS shall display the current UPS status on the UPS cabinet. The UPS cabinet shall provide the capability to monitor battery status (charged, uncharged, good, failed, etc.) without having to take the batteries out of the UPS to check manually. The UPS shall have the means to provide feedback to the ATC trainers on the state of the UPS and of the potential of loss of power.

The UPS shall provide a means of battery monitoring. The battery monitoring capability shall provide the ability to check the power status of the UPS and batteries (i.e. on ac power, ac power loss on battery, bypass mode, on battery time remaining 5 minutes to shutdown, etc.) from a remote location via a relay card (or other physical connection, aside from the use of Ethernet) to signal battery low to allow labs shutdown before complete power loss. The interface for remote battery monitoring shall allow the use of any platform (i.e. Windows/Linux/Mac). The interface shall allow for monitoring from any number of remote stations.

The existing connections to building power and the ATC trainers shall be relocated from the existing UPS unit to the new UPS unit. The new UPS shall be installed in the ATC School Computer Room (Room 245);

rerouting of the existing wiring will be required.

The UPS shall have an EPO switch on the UPS unit. The UPS shall have the capability to accept switch input from the EPO switches currently located in the Computer Room.

The existing unit (EATON 9390 UPS, plus cabinet with 40 batteries), including any spares, shall be removed. Disposal shall be IAW local salvage and EPA procedures. The removed equipment shall be transported to the Defense Reclamation Material Office (DRMO) facility in Eglin Air Force Base.

Documentation of the proper disposal of the removed equipment shall be provided.

All available Commercial-Off-The-Shelf (COTS) Documentation shall be provided to support the use and maintenance of the UPS. Facility power drawings shall be provided. The contractor shall provide updated facility power drawings to show the installation of the new UPS. Documentation of the Battery Monitoring Interface shall be provided to support the monitoring of the battery status.

The installed UPS unit shall be tested, visually and functionally, to verify that the installed UPS meets the requirements set forth in this document. The contractor shall have personnel available to address and correct any discrepancies found during testing.

All new or modified facility work shall be subject to Government approval prior to any work being initiated.

The work shall meet state and local electrical codes including NFPA-70 requirements.

Approvals of all electrical work shall consist of the following:

A. Designer-of-record Professional Engineer (PE) stamp on design drawings B. When wall penetrations will be made, Fire Protection Engineer (FPE) review and sign-off of design drawings to certify the plans meet all fire and safety codes C. Submission of design drawings to the Public Works Department and the building manager for review and approval, after they have been PE stamped D. After all work is completed, PE on-site inspection and approval of the work

INDUSTRY DAY: The Government had an industry day (site visit) for potential industry partners. This visit provided potential offerors a look at the UPS system, and provided an opportunity for an in-person question and answer session. The Government’s primary goal was to exchange information, to seek feedback from industry early in the acquisition process, and to address any questions or concerns participants may have had. Interested vendors were not required to attend industry day to be eligible to submit an offer for this future requirement.

1) List of Contract Line Item Numbers, Items, Quantities and Units of Measure:

CLIN 0001; Replacement and removal of current UPS system. See SOW for additional information.

2) Dates and place of delivery and acceptance:

Delivery shall be made to:

NAS Pensacola Attention: Rick Cash 281 Farrar Rd Bldg 3220 ATC Pensacola, FL 32508

Note: Inspection and Acceptance will occur at delivery site and will be conducted by the Government.

Delivery shall be within 60 days after contract award.

The provision at FAR 52.212-2, Evaluation–Commercial Items, does not apply.

All Offerors must include a completed copy of the provision at 52.212-3, Offeror Representations and Certifications- Commercial Items, with its offer.

3) Basis of Award:

The Government will award a contract resulting from this solicitation, to the responsible offeror based on the lowest priced technically acceptable (LPTA). For the purposes of this evaluation;

technically acceptability is defined as:

a) Meeting all item specifications

b) Meeting delivery date

c) Offeror must be registered in SAM with the correct NAICS code, at the time of proposal receipt of quotations.

Note: The Government reserves the right to request additional information as it deems necessary.

Such request shall be considered clarification. Also, all new entities registering in GSA’s System for Award Management (SAM), as well as existing registrations being updated or renewed, will require the submission of an original, signed notarized letter identifying the authorized Entity Administrator for the entity associated with the Data Universal Numbering System (DUNS) number before the registration will be activated. It is recommended that all interested parties be aware that processing this additional information may take several days and are proactive in maintaining the SAM registrations in an “Active” status as the government cannot award to an entity without an “Active” SAM registration. More information can be found at www.gsa.gov/samupdate.”

4) Quote Submission Information:

The provision at FAR 52.212-1, Instructions to Offerors-Commercial Products and Commercial Services applies to this acquisition and is augmented with the following.

Quotes are due, via e-mail only, no later than 1200 Eastern Standard Time 05 August 2022 to amber.m.lizotte.civ@us.navy.mil. Responses shall include the solicitation number, name, address, and telephone number of the offeror. Proprietary data in the responses will be protected where so designated. Please fill out all applicable provisions and clauses.

For information or questions regarding this RFQ, contact the cognizant Contract Specialist, Amber Lizotte at amber.m.lizotte.civ@us.navy.mil or Bryan Walsh, Procuring Contracting Officer (PCO) at bryan.s.walsh2.civ@us.navy.mil.

5) Contract Provisions Incorporated by Reference:

52.204-7 System for Award Management (October 2018) 52.204-16 Commercial and Government Entity Code Reporting (August 2020) 52.204-17 Ownership or Control of Offeror (Aug 2020) 52.204-20 Predecessor of Offeror (Aug 2020)

52.204-24 Representation Regarding Certain Telecommunications and Video Surveillance Services or Equipment (August 2020)

52.204-26 Covered Telecommunications Equipment or Services Representation (December 2019)

52.209-2 Prohibition On Contracting With Inverted Domestic Corporations – Representation (November 2015)

52.209-11 Representation by Corporations Regarding Delinquent Tax Liability or a Felony Conviction under any Federal Law (February 2016)

52.212-1 Instructions to Offerors – Commercial Items (Jun 2020) 52.212-3 Alternate 1, Offeror Representations and Certifications – Commercial

Items (Oct 2014) 52.222-22 Previous Contracts and Compliance Reports (February 1999) 52.225-25 Prohibition on Contracting with Entities Engaging in Certain Activities or Transactions Relating to Iran – Representation and Certifications (June 2020)

52.239-1 Privacy or Security Safeguards (Aug 1996) 52.252-1 Solicitation Provisions Incorporated by Reference (Feb 1998) 252.203-7005 Representation Relating to Compensation of Former DoD Officials

(November 2011)

252.204-7016 Covered Defense Telecommunications Equipment or Services – Representation (December 2019)

252.204-7017 Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services – Representation (December 2019)

6) Contract Provision(s) Incorporated by Full Text:

52.225-2 – Buy American Certificate (May 2014)

(a) The offeror certifies that each end product, except those listed in paragraph (b) of this provision, is a domestic end product and that for other than COTS items, the offeror has considered components of unknown origin to have been mined, produced, or manufactured outside the United States. The offeror shall list as foreign end products those end products manufactured in the United States that do not qualify as domestic end products, i.e., an end product that is not a COTS item and does not meet the component test in paragraph (2) of the definition of “domestic end product.” The terms “commercially available off-the-shelf (COTS) item,” “component,” “domestic end product,” “end product,” “foreign end product,” and “United States” are defined in the clause of this solicitation entitled “Buy American—Supplies.”

(b) Foreign End Products:

Line Item No.: Country of Origin:

[List as necessary]

(c) The Government will evaluate offers in accordance with the policies and procedures of Part 25 of the Federal Acquisition Regulation.

(End of Provision)

7) Contract Clauses Incorporated by Reference:

52.204-13 System for Award Management Maintenance (Oct 2018) 52.204-18 Commercial and Government Entity Code Maintenance (August 2020) 52.204-19 Incorporation by Reference of Representations and Certifications (Dec

2014) 52.209-10 Prohibition on Contracting With Inverted Domestic Corporations (Nov

2015) 52.212-4 Contract Terms and Conditions – Commercial Items (October 2018) 52.232-1 Payments (Apr 1984) 52.232-11 Extras (Apr 1984) 52.232-39 Unenforceability of Unauthorized Obligations (June 2013) 52.233-1 Disputes (May 2014) 52.243-1 Changes – Fixed-Price (August 1987) 52.247-34 F.O.B. – Destination (November 1991) 52.252-2 Clauses Incorporated by Reference (February 1998) 52.252-6 Authorized Deviations in Clauses 252.203-7000 Requirements Relating to Compensation of Former DoD Officials

(September 2011)

252.203-7002

Requirements to Inform Employees of Whistleblower Rights (September 2013)

252.204-7003 Control of Government Personnel Work Product (April 1992) 252.204-7006 Billing Instructions (October 2005) 252.204-7015 Notice of Authorized Disclosure of Information for Litigation Support (May

2016) 252.204-7018 Prohibition on the Acquisition of Covered Defense Telecommunications

Equipment or Services (December 2019) 252.211-7008 Use of Government-Assigned Serial Numbers 252.225-7048 Export-Controlled Items (June 2013) 252.232-7003 Electronic Submission of Payment Request and Receiving Reports (June

2012) 252.232-7010 Levies on Contract Payments (Dec 2006)

8) Contract Clauses Incorporated by Full Text:

52.212-5 – CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR

EXECUTIVE ORDERS—COMMERCIAL ITEMS (May 2022)

(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial items:

(1) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (JAN 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(2) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab and Other Covered Entities (Jul 2018) (Section 1634 of Pub. L. 115-91).

(3) 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment. (AUG 2020) (Section 889(a)(1)(A) of Pub. L. 115-232).

(4) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (Nov 2015).

(5) 52.233-3, Protest After Award (AUG 1996) (31 U.S.C. 3553).

(6) 52.233-4, Applicable Law for Breach of Contract Claim (OCT 2004) (Public Laws 108-77 and 108-78 (19 U.S.C. 3805 note)).

(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items: (Contracting Officer check as appropriate.)

(1) 52.203-6, Restrictions on Subcontractor Sales to the Government (JUN 2020), with Alternate I (Oct 1995) (41 U.S.C. 4704 and 10 U.S.C. 2402).

(2) 52.203-13, Contractor Code of Business Ethics and Conduct (JUN 2020) (41 U.S.C. 3509).

(3) 52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of 2009 (JUN 2010) (Section 1553 of Pub. L. 111-5). (Applies to contracts funded by the American Recovery and Reinvestment Act of 2009.)

(4) 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (JUN 2020) (Pub. L. 109-282) (31 U.S.C. 6101 note).

(5) [Reserved]

(6) 52.204-14, Service Contract Reporting Requirements (Oct 2016) (Pub. L. 111-117, section 743 of Div. C).

(7) 52.204-15, Service Contract Reporting Requirements for Indefinite-Delivery Contracts (Oct 2016) (Pub. L. 111-117, section 743 of Div. C).

(8) 52.209-6, Protecting the Government's Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment. (JUN 2020) (31 U.S.C. 6101 note).

(9) 52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters (OCT 2018) (41 U.S.C. 2313).

(10) [Reserved]

(11)(i) 52.219-3, Notice of HUBZone Set-Aside or Sole-Source Award (MAR 2020) (15 U.S.C.

657a).

(ii) Alternate I (MAR 2020) of 52.219-3.

(12) (i) 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns (MAR 2020) (if the offeror elects to waive the preference, it shall so indicate in its offer) (15 U.S.C.

657a).

(ii) Alternate I (MAR 2020) of 52.219-4.

(13) [Reserved]

(14)(i) 52.219-6, Notice of Total Small Business Set-Aside (MAR 2020) (15 U.S.C. 644).

(ii) Alternate I (MAR 2020) of 52.219-6.

(15)(i) 52.219-7, Notice of Partial Small Business Set-Aside (MAR 2020) (15 U.S.C. 644).

(ii) Alternate I (MAR 2020) of 52.219-7.

(16) 52.219-8, Utilization of Small Business Concerns (OCT 2018) (15 U.S.C. 637(d)(2) and (3)).

(17)(i) 52.219-9, Small Business Subcontracting Plan (JUN 2020) (15 U.S.C. 637(d)(4)).

(ii) Alternate I (NOV 2016) of 52.219-9.

(iii) Alternate II (NOV 2016) of 52.219-9.

(iv) Alternate III (JUN 2020) of 52.219-9.

(v) Alternate IV (JUN 2020) of 52.219-9.

(18) (i) 52.219-13, Notice of Set-Aside of Orders (MAR 2020) (15 U.S.C. 644(r)).

(ii) Alternate I (MAR 2020) of 52.219-13.

(19) 52.219-14, Limitations on Subcontracting (MAR 2020) (15 U.S.C. 637(a)(14)).

(20) 52.219-16, Liquidated Damages—Subcontracting Plan (Jan 1999) (15 U.S.C. 637(d)(4)(F)(i)).

(21) 52.219-27, Notice of Service-Disabled Veteran-Owned Small Business Set-Aside (MAR 2020) (15 U.S.C. 657f).

(22) (i) 52.219-28, Post Award Small Business Program Rerepresentation (MAY 2020) (15 U.S.C.

632(a)(2)).

(ii) Alternate I (MAR 2020) of 52.219-28.

(23) 52.219-29, Notice of Set-Aside for, or Sole Source Award to, Economically Disadvantaged Women-Owned Small Business (EDWOSB) Concerns (MAR 2020) (15 U.S.C. 637(m)).

(24) 52.219-30, Notice of Set-Aside for, or Sole Source Award to, Women-Owned Small Business Concerns Eligible Under the Women-Owned Small Business Program (MAR 2020) (15 U.S.C. 637(m)).

(25) 52.219-32, Orders Issued Directly Under Small Business Reserves (MAR 2020) (15 U.S.C.

644(r)).

(26) 52.219-33, Nonmanufacturer Rule (MAR 2020) (15 U.S.C. 637(a)(17)).

(27) 52.222-3, Convict Labor (JUN 2003) (E.O. 11755).

(28) 52.222-19, Child Labor--Cooperation with Authorities and Remedies (JAN 2020) (E.O. 13126).

(29) 52.222-21, Prohibition of Segregated Facilities (APR 2015).

(30)(i) 52.222-26, Equal Opportunity (SEPT 2016) (E.O. 11246).

(ii) Alternate I (FEB 1999) of 52.222-26.

(31)(i) 52.222-35, Equal Opportunity for Veterans (JUN 2020) (38 U.S.C. 4212).

(ii) Alternate I (JUL 2014) of 52.222-35.

(32)(i) 52.222-36, Equal Opportunity for Workers with Disabilities (JUN 2020) (29 U.S.C. 793).

(ii) Alternate I (JUL 2014) of 52.222-36.

(33) 52.222-37, Employment Reports on Veterans (JUN 2020) (38 U.S.C. 4212).

(34) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (DEC 2010) (E.O. 13496).

(35)(i) 52.222-50, Combating Trafficking in Persons (JAN 2019) (22 U.S.C. chapter 78 and E.O.

13627).

(ii) Alternate I (MAR 2015) of 52.222-50 (22 U.S.C. chapter 78 and E.O. 13627).

(36) 52.222-54, Employment Eligibility Verification (MAY 2022). (E. O. 12989). (Not applicable to the acquisition of commercially available off-the-shelf items or certain other types of commercial items as prescribed in 22.1803.)

(37)(i) 52.223-9, Estimate of Percentage of Recovered Material Content for EPA–Designated Items (MAY 2008) (42 U.S.C. 6962(c)(3)(A)(ii)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

(ii) Alternate I (MAY 2008) of 52.223-9 (42 U.S.C. 6962(i)(2)(C)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

(38) 52.223-11, Ozone-Depleting Substances and High Global Warming Potential Hydrofluorocarbons (JUN 2016) (E.O. 13693).

(39) 52.223-12, Maintenance, Service, Repair, or Disposal of Refrigeration Equipment and Air Conditioners (JUN 2016) (E.O. 13693).

(40) (i) 52.223-13, Acquisition of EPEAT® Registered Imaging Equipment (JUN 2014) (E.O.s 13423 and 13514).

(ii) Alternate I (OCT 2015) of 52.223-13.

(41)(i) 52.223-14, Acquisition of EPEAT® Registered Televisions (JUN 2014) (E.O.s 13423 and 13514).

(ii) Alternate I (JUN 2014) of 52.223-14.

(42) 52.223-15, Energy Efficiency in Energy-Consuming Products (MAY 2020) (42 U.S.C. 8259b).

(43)(i) 52.223-16, Acquisition of EPEAT®-Registered Personal Computer Products (OCT 2015) (E.O.s 13423 and 13514).

(ii) Alternate I (JUN 2014) of 52.223-16.

(44) 52.223-18, Encouraging Contractor Policies to Ban Text Messaging While Driving (JUN 2020) (E.O. 13513).

(45) 52.223-20, Aerosols (JUN 2016) (E.O. 13693).

(46) 52.223-21, Foams (JUN 2016) (E.O. 13693).

(47)(i) 52.224-3, Privacy Training (JAN 2017) (5 U.S.C. 552a).

(ii) Alternate I (JAN 2017) of 52.224-3.

(48) 52.225-1, Buy American--Supplies (MAY 2014) (41 U.S.C. chapter 83).

(49) (i) 52.225-3, Buy American--Free Trade Agreements--Israeli Trade Act (MAY 2014) (41 U.S.C. chapter 83, 19 U.S.C. 3301 note, 19 U.S.C. 2112 note, 19 U.S.C. 3805 note, 19 U.S.C. 4001 note, Pub. L. 103-182, 108-77, 108-78, 108-286, 108-302, 109-53, 109-169, 109-283, 110-138, 112-41, 112- 42, and 112-43.

(ii) Alternate I (MAY 2014) of 52.225-3.

(iii) Alternate II (MAY 2014) of 52.225-3.

(iv) Alternate III (MAY 2014) of 52.225-3.

(50) 52.225-5, Trade Agreements (OCT 2019) 19 U.S.C. 2501, et seq., 19 U.S.C. 3301 note).

(51) 52.225-13, Restrictions on Certain Foreign Purchases (JUN 2008) (E.O.'s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury).

(52) 52.225-26, Contractors Performing Private Security Functions Outside the United States (OCT 2016) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. 2302 Note).

(53) 52.226-4, Notice of Disaster or Emergency Area Set-Aside (NOV 2007) (42 U.S.C. 5150

(54) 52.226-5, Restrictions on Subcontracting Outside Disaster or Emergency Area (NOV 2007) (42 U.S.C. 5150).

(55) 52.229-12, Tax on Certain Foreign Procurements (JUN 2020).

(56) 52.232-29, Terms for Financing of Purchases of Commercial Items (FEB 2002) (41 U.S.C.

4505, 10 U.S.C. 2307(f)).

(57) 52.232-30, Installment Payments for Commercial Items (JAN 2017) (41 U.S.C. 4505, 10 U.S.C. 2307(f)).

(58) 52.232-33, Payment by Electronic Funds Transfer—System for Award Management (OCT 2018) (31 U.S.C. 3332).

(59) 52.232-34, Payment by Electronic Funds Transfer—Other than System for Award Management

(JUL 2013) (31 U.S.C. 3332).

(60) 52.232-36, Payment by Third Party (MAY 2014) (31 U.S.C. 3332).

(61) 52.239-1, Privacy or Security Safeguards (AUG 1996) (5 U.S.C. 552a).

(62) 52.242-5, Payments to Small Business Subcontractors (JAN 2017)(15 U.S.C. 637(d)(13)).

(63)(i) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (FEB 2006) (46 U.S.C. Appx. 1241(b) and 10 U.S.C. 2631).

(ii) Alternate I (APR 2003) of 52.247-64.

(iii) Alternate II (FEB 2006) of 52.247-64.

(c) The Contractor shall comply with the FAR clauses in this paragraph (c), applicable to commercial services, that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items:

(1) 52.222-41, Service Contract Labor Standards (AUG 2018) (41 U.S.C. chapter 67).

(2) 52.222-42, Statement of Equivalent Rates for Federal Hires (MAY 2014) (29 U.S.C. 206 and 41 U.S.C. chapter 67).

(3) 52.222-43, Fair Labor Standards Act and Service Contract Labor Standards--Price Adjustment (Multiple Year and Option Contracts) (AUG 2018) (29 U.S.C. 206 and 41 U.S.C. chapter 67).

(4) 52.222-44, Fair Labor Standards Act and Service Contract Labor Standards--Price Adjustment (MAY 2014) (29 U.S.C 206 and 41 U.S.C. chapter 67).

(5) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment--Requirements (MAY 2014) (41 U.S.C.

chapter 67).

(6) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services--Requirements (MAY 2014) (41 U.S.C. chapter 67).

(7) 52.222-55, Minimum Wages Under Executive Order 13658 (DEC 2015) (E.O. 13658).

(8) 52.222-62, Paid Sick Leave Under Executive Order 13706 (JAN 2017) (E.O. 13706).

(9) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations (JUN 2020) (42 U.S.C.

1792).

(d) Comptroller General Examination of Record. The Contractor shall comply with the provisions of this paragraph (d) if this contract was awarded using other than sealed bid, is in excess of the simplified acquisition threshold, as defined in FAR 2.101, on the date of award of this contract, and does not contain the clause at 52.215-2, Audit and Records--Negotiation.

(1) The Comptroller General of the United States, or an authorized representative of the Comptroller General, shall have access to and right to examine any of the Contractor's directly pertinent records involving transactions related to this contract.

(2) The Contractor shall make available at its offices at all reasonable times the records, materials, and other evidence for examination, audit, or reproduction, until 3 years after final payment under this contract or for any shorter period specified in FAR Subpart 4.7, Contractor Records Retention, of the other clauses of this contract. If this contract is completely or partially terminated, the records relating to the work terminated shall be made available for 3 years after any resulting final termination settlement.

Records relating to appeals under the disputes clause or to litigation or the settlement of claims arising under or relating to this contract shall be made available until such appeals, litigation, or claims are finally resolved.

(3) As used in this clause, records include books, documents, accounting procedures and practices, and other data, regardless of type and regardless of form. This does not require the Contractor to create or maintain any record that the Contractor does not maintain in the ordinary course of business or pursuant to a provision of law.

(e) (1) Notwithstanding the requirements of the clauses in paragraphs (a), (b), (c), and (d) of this clause, the Contractor is not required to flow down any FAR clause, other than those in this paragraph (e)(1)in a subcontract for commercial items. Unless otherwise indicated below, the extent of the flow down shall be as required by the clause—

(i) 52.203-13, Contractor Code of Business Ethics and Conduct (JUN 2020) (41 U.S.C. 3509).

(ii) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (JAN 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(iii) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab and Other Covered Entities (Jul 2018) (Section 1634 of Pub. L. 115-91).

(iv) 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment. (AUG 2020) (Section 889(a)(1)(A) of Pub. L. 115-232).

(v) 52.219-8, Utilization of Small Business Concerns (Oct 2018) (15 U.S.C. 637(d)(2) and (3)), in all subcontracts that offer further subcontracting opportunities. If the subcontract (except subcontracts to small business concerns) exceeds the applicable threshold specified in FAR 19.702(a) on the date of subcontract award, the subcontractor must include 52.219-8 in lower tier subcontracts that offer subcontracting opportunities.

(vi) 52.222-21, Prohibition of Segregated Facilities (Apr 2015).

(vii) 52.222-26, Equal Opportunity (Sep 2016) (E.O. 11246).

(viii) 52.222-35, Equal Opportunity for Veterans (JUN 2020) (38 U.S.C. 4212).

(ix) 52.222-36, Equal Opportunity for Workers with Disabilities (JUN 2020) (29 U.S.C. 793).

(x) 52.222-37, Employment Reports on Veterans (JUN 2020) (38 U.S.C. 4212).

(xi) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O. 13496). Flow down required in accordance with paragraph (f) of FAR clause 52.222-40.

(xii) 52.222-41, Service Contract Labor Standards (Aug 2018), (41 U.S.C. chapter 67).

(xiii) (A) 52.222-50, Combating Trafficking in Persons (JAN 2019) (22 U.S.C. chapter 78 and E.O. 13627).

(B) Alternate I (March 2, 2015) of 52.222-50 (22 U.S.C. chapter 78 and E.O. 13627).

(xiv) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment--Requirements (May 2014) (41 U.S.C. chapter 67.)

(xv) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services--Requirements (May 2014) (41 U.S.C. chapter 67)

(xvi) 52.222-54, Employment Eligibility Verification (May 2022) (E. O. 12989).

(xvii) 52.222-55, Minimum Wages Under Executive Order 13658 (Dec 2015) (E.O. 13658).

(xviii) 52.222-62, Paid Sick Leave Under Executive Order 13706 (Jan 2017) (E.O. 13706).

(xix) (A) 52.224-3, Privacy Training (Jan 2017) (5 U.S.C. 552a).

(B) Alternate I (Jan 2017) of 52.224-3.

(xx) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Oct 2016) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C.

2302 Note).

(xxi) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations. (JUN 2020) (42 U.S.C.

1792). Flow down required in accordance with paragraph (e) of FAR clause 52.226-6.

(xxii) 52.247-64, Preference for Privately-Owned U.S. Flag Commercial Vessels (Feb 2006) (46 U.S.C.

Appx 1241(b) and 10 U.S.C. 2631). Flow down required in accordance with paragraph (d) of FAR clause 52.247-64.

(2) While not required, the Contractor may include in its subcontracts for commercial items a minimal number of additional clauses necessary to satisfy its contractual obligations.

(End of clause)

252.211-7003 – ITEM UNIQUE IDENTIFICATION AND VALUATION (MARCH 2016)

(a) Definitions. As used in this clause-

Automatic identification device means a device, such as a reader or interrogator, used to retrieve data encoded on machine-readable media.

Concatenated unique item identifier means--

(1) For items that are serialized within the enterprise identifier, the linking together of the unique identifier data elements in order of the issuing agency code, enterprise identifier, and unique serial number within the enterprise identifier; or

(2) For items that are serialized within the original part, lot, or batch number, the linking together of the unique identifier data elements in order of the issuing agency code; enterprise identifier; original part, lot, or batch number; and serial number within the original part, lot, or batch number.

Data Matrix means a two-dimensional matrix symbology, which is made up of square or, in some cases, round modules arranged within a perimeter finder pattern and uses the Error Checking and Correction 200 (ECC200) specification found within International Standards Organization (ISO)/International Electrotechnical Commission (IEC) 16022.

Data qualifier means a specified character (or string of characters) that immediately precedes a data field that defines the general category or intended use of the data that follows.

DoD recognized unique identification equivalent means a unique identification method that is in commercial use and has been recognized by DoD. All DoD recognized unique identification equivalents are listed at http://www.acq.osd.mil/dpap/pdi/uid/iuid_equivalents.html.

DoD item unique identification means a system of marking items delivered to DoD with unique item identifiers that have machine-readable data elements to distinguish an item from all other like and unlike items. For items that are serialized within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier and a unique serial number. For items that are serialized within the part, lot, or batch number within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier; the original part, lot, or batch number; and the serial number.

Enterprise means the entity (e.g., a manufacturer or vendor) responsible for assigning unique item identifiers to items.

Enterprise identifier means a code that is uniquely assigned to an enterprise by an issuing agency.

Government's unit acquisition cost means--

(1) For fixed-price type line, subline, or exhibit line items, the unit price identified in the contract at the time of delivery;

(2) For cost-type or undefinitized line, subline, or exhibit line items, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery; and

(3) For items produced under a time-and-materials contract, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery.

Issuing agency means an organization responsible for assigning a globally unique identifier to an enterprise, as indicated in the Register of Issuing Agency Codes for ISO/IEC 15459, located at http://www.aimglobal.org/?Reg_Authority15459.

Issuing agency code means a code that designates the registration (or controlling) authority for the enterprise identifier.

Item means a single hardware article or a single unit formed by a grouping of subassemblies, components, or constituent parts.

Lot or batch number means an identifying number assigned by the enterprise to a designated group of items, usually referred to as either a lot or a batch, all of which were manufactured under identical conditions.

Machine-readable means an automatic identification technology media, such as bar codes, contact memory buttons, radio frequency identification, or optical memory cards.

Original part number means a combination of numbers or letters assigned by the enterprise at item creation to a class of items with the same form, fit, function, and interface.

Parent item means the item assembly, intermediate component, or subassembly that has an embedded item with a unique item identifier or DoD recognized unique identification equivalent.

Serial number within the enterprise identifier means a combination of numbers, letters, or symbols assigned by the enterprise to an item that provides for the differentiation of that item from any other like and unlike item and is never used again within the enterprise.

Serial number within the part, lot, or batch number means a combination of numbers or letters assigned by the enterprise to an item that provides for the differentiation of that item from any other like item within a part, lot, or batch number assignment.

Serialization within the enterprise identifier means each item produced is assigned a serial number that is unique among all the tangible items produced by the enterprise and is never used again. The enterprise is responsible for ensuring unique serialization within the enterprise identifier.

Serialization within the part, lot, or batch number means each item of a particular part, lot, or batch number is assigned a unique serial number within that part, lot, or batch number assignment. The enterprise is responsible for ensuring unique serialization within the part, lot, or batch number within the enterprise identifier.

Type designation means a combination of letters and numerals assigned by the Government to a major end item, assembly or subassembly, as appropriate, to provide a convenient means of differentiating between items having the same basic name and to indicate modifications and changes thereto.

Unique item identifier means a set of data elements marked on items that is globally unique and unambiguous. The term includes a concatenated unique item identifier or a DoD recognized unique identification equivalent.

Unique item identifier type means a designator to indicate which method of uniquely identifying a part has been used. The current list of accepted unique item identifier types is maintained at http://www.acq.osd.mil/dpap/pdi/uid/uii_types.html.

(b) The Contractor shall deliver all items under a contract line, subline, or exhibit line item.

(c) Unique item identifier. (1) The Contractor shall provide a unique item identifier for the following:

(i) Delivered items for which the Government's unit acquisition cost is $5,000 or more, except for the following line items:

N/A

Contract line, subline, or exhibit line item No. Item description

(ii) Items for which the Government's unit acquisition cost is less than $5,000 that are identified in the Schedule or the following table:

N/A

Contract line, subline, or exhibit line item No. Item description

(iii) Subassemblies, components, and parts embedded within delivered items, items with warranty requirements, DoD serially managed reparables and DoD serially managed nonreparables as specified in Attachment Number ----.

(iv) Any item of special tooling or special test equipment as defined in FAR 2.101 that have been designated for preservation and storage for a Major Defense Acquisition Program as specified in Attachment Number ----.

(v) Any item not included in paragraphs (c)(1)(i), (ii), (iii), or

(iv) of this clause for which the contractor creates and marks a unique item identifier for traceability.

(2) The unique item identifier assignment and its component data element combination shall not be duplicated on any other item marked or registered in the DoD Item Unique Identification Registry by the contractor.

(3) The unique item identifier component data elements shall be marked on an item using two dimensional data matrix symbology that complies with ISO/IEC International Standard 16022, Information technology--International symbology specification--Data matrix; ECC200 data matrix specification.

(4) Data syntax and semantics of unique item identifiers. The Contractor shall ensure that--

(i) The data elements (except issuing agency code) of the unique item identifier are encoded within the data matrix symbol that is marked on the item using one of the following three types of data qualifiers, as determined by the Contractor:

(A) Application Identifiers (AIs) (Format Indicator 05 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology--EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard.

(B) Data Identifiers (DIs) (Format Indicator 06 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology--EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard.

(C) Text Element Identifiers (TEIs) (Format Indicator 12 of ISO/IEC International Standard 15434), in accordance with the Air Transport Association Common Support Data Dictionary; and

(ii) The encoded data elements of the unique item identifier conform to the transfer structure, syntax, and coding of messages and data formats specified for Format Indicators 05, 06, and 12 in ISO/IEC International Standard 15434, Information Technology-Transfer Syntax for High Capacity Automatic Data Capture Media.

(5) Unique item identifier.

(i) The Contractor shall--

(A) Determine whether to--

(1) Serialize within the enterprise identifier;

(2) Serialize within the part, lot, or batch number; or

(3) Use a DoD recognized unique identification equivalent (e.g. Vehicle Identification Number); and

(B) Place the data elements of the unique item identifier (enterprise identifier; serial number; DoD recognized unique identification equivalent; and for serialization within the part, lot, or batch number only: Original part, lot, or batch number) on items requiring marking by paragraph (c)(1) of this clause, based on the criteria provided in MIL-STD-130, Identification Marking of U.S. Military Property, latest version;

(C) Label shipments, storage containers and packages that contain uniquely identified items in accordance with the requirements of MIL-STD-129, Military Marking for Shipment and Storage, latest version; and

(D) Verify that the marks on items and labels on shipments, storage containers, and packages are machine readable and conform to the applicable standards. The contractor shall use an automatic identification technology device for this verification that has been programmed to the requirements of Appendix A, MIL-STD-130, latest version.

(ii) The issuing agency code--

(A) Shall not be placed on the item; and

(B) Shall be derived from the data qualifier for the enterprise identifier.

(d) For each item that requires item unique identification under paragraph (c)(1)(i), (ii), or (iv) of this clause or when item unique identification is provided under paragraph (c)(1)(v), in addition to the information provided as part of the Material Inspection and Receiving Report specified elsewhere in this contract, the Contractor shall report at the time of delivery, as part of the Material Inspection and Receiving Report, the following information:

(1) Unique item identifier.

(2) Unique item identifier type.

(3) Issuing agency code (if concatenated unique item identifier is used).

(4) Enterprise identifier (if concatenated unique item identifier is used).

(5) Original part number (if there is serialization within the original part number).

(6) Lot or batch number (if there is serialization within the lot or batch number).

(7) Current part number (optional and only if not the same as the original part number).

(8) Current part number effective date (optional and only if current part number is used).

(9) Serial number (if concatenated unique item identifier is used).

(10) Government's unit acquisition cost.

(11) Unit of measure.

(12) Type designation of the item as specified in the contract schedule, if any.

(13) Whether the item is an item of Special Tooling or Special Test Equipment.

(14) Whether the item is covered by a warranty.

(e) For embedded subassemblies, components, and parts that require DoD unique item identification under paragraph (c)(1)(iii) of this clause, the Contractor shall report as part of, or associated with, the Material Inspection and Receiving Report specified elsewhere in this contract, the following information:

(1) Unique item identifier of the parent item under paragraph (c)(1) of this clause that contains the embedded subassembly, component, or part.

(2) Unique item identifier of the embedded subassembly, component, or part.

(3) Unique item identifier type.**

(4) Issuing agency code (if concatenated unique item identifier is used).**

(5) Enterprise identifier (if concatenated unique item identifier is used).**

(6) Original part number (if there is serialization within the original part number).**

(7) Lot or batch number (if there is serialization within the lot or batch number).**

(8) Current part number (optional and only if not the same as the original part number).**

(9) Current part number effective date (optional and only if current part number is used).**

(10) Serial number (if concatenated unique item identifier is used).**

(11) Description.

** Once per item.

(f) The Contractor shall submit the information required by paragraphs (d) and (e) of this clause as follows:

(1) End items shall be reported using the receiving report capability in Wide Area WorkFlow (WAWF) in accordance with the clause at 252.232-7003. If WAWF is not required by this contract, and the contractor is not using WAWF, follow the procedures at http://dodprocurementtoolbox.com/site/uidregistry/.

(2) Embedded items shall be reported by one of the following methods--

(i) Use of the embedded items capability in WAWF;

(ii) Direct data submission to the IUID Registry following the procedures and formats at http://dodprocurementtoolbox.com/site/uidregistry/; or

(iii) Via WAWF as a deliverable attachment for exhibit line item number (fill in) -----, Unique Item Identifier Report for Embedded Items, Contract Data Requirements List, DD Form 1423.

(g) Subcontracts. If the Contractor acquires by subcontract any items for which item unique identification is required in accordance with paragraph (c)(1) of this clause, the Contractor shall include this clause, including this paragraph (g), in the applicable subcontract(s), including subcontracts for commercial items.

252.232-7006 – WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (MAY 2013)

(a) Definitions. As used in this clause—

“Department of Defense Activity Address Code (DoDAAC)” is a six position code that uniquely identifies a unit, activity, or organization.

“Document type” means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).

“Local processing office (LPO)” is the office responsible for payment certification when payment certification is done external to the entitlement system.

“Payment request” and “receiving report” are defined in the clause at 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(b) Electronic invoicing. The WAWF system provides the method to electronically process vendor payment requests and receiving reports, as authorized by Defense Federal Acquisition Regulation Supplement (DFARS) 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(c) WAWF access. To access WAWF, the Contractor shall—

(1) Have a designated electronic business point of contact in the System for Award Management at https://www.sam.gov; and

(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this web site.

(d) WAWF training. The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice Training Site before submitting payment requests through WAWF.

Both can be accessed by selecting the “Web Based Training” link on the WAWF home page at https://wawf.eb.mil/.

(e) WAWF methods of document submission. Document submissions may be via web entry, Electronic Data Interchange, or File Transfer Protocol.

(f) WAWF payment instructions. The Contractor shall use the following information when submitting payment requests and receiving reports in WAWF for this contract or task or delivery order:

(1) Document type. The Contractor shall submit payment requests using the following document type(s):

(i) For cost-type line items, including labor-hour or time-and-materials, submit a cost voucher.

(ii) For fixed price line items—

(A) That require shipment of a deliverable, submit the invoice and receiving report specified by the Contracting Officer.

Invoice and Receiving Report

Inspection Location: Destination Acceptance Location: Destination

(B) For services that do not require shipment of a deliverable, submit either the Invoice 2in1, which meets the requirements for the invoice and receiving report, or the applicable invoice and receiving report, as specified by the Contracting Officer.

Invoice and Receiving Report

Inspection Location: Destination Acceptance Location: Destination

(iii) For customary progress payments based on costs incurred, submit a progress payment request.

(iv) For performance based payments, submit a performance based payment request.

(v) For commercial item financing, submit a commercial item financing request.

(2) Fast Pay requests are only permitted when Federal Acquisition Regulation (FAR) 52.213-1 is included in the contract.

(3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system.

Routing Data Table*

Field Name in WAWF Data to be entered in WAWF

Pay Official DoDAAC N64142

Issue By DoDAAC N61340

Admin DoDAAC** N61340

Inspect By DoDAAC N61340

Ship To Code N61340

Ship From Code N/A

Mark For Code N61340

Service Approver (DoDAAC) N61340

Service Acceptor (DoDAAC) N/A

Accept at Other DoDAAC N/A

LPO DoDAAC N/A

DCAA Auditor DoDAAC N/A

Other DoDAAC(s) N/A

(4) Payment request. The Contractor shall ensure a payment request includes documentation appropriate to the type of payment request in accordance with the payment clause, contract financing clause, or Federal Acquisition Regulation 52.216-7, Allowable Cost and Payment, as applicable.

(5) Receiving report. The Contractor shall ensure a receiving report meets the requirements of DFARS Appendix F.

(g) WAWF point of contact.

(1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity’s WAWF point of contact.

View Only: Amber Lizotte, amber.m.lizotte.civ@us.navy.mil Acceptor: LCDR Miguel Estrella, miguel.d.estrella.mil@us.navy.mil Acceptor: Randy Holder, randy.p.holder.civ@us.navy.mil

(2) Contact the WAWF helpdesk at 866-618-5988, if assistance is needed.

GTXT-PAY – PAYMENT INSTRUCTIONS (APRIL 2018)

FOR GOVERNMENT USE ONLY

Contract/Order Payment Clause

Type of Payment Request

Supply

Service

Construction

Payment Office

Allocation Method

52.212-4 (Alt I), Contract Terms and Conditions— Commercial Items

52.216-7, Allowable Cost and Payment

52.232-7, Payments under Time-and- Materials and Labor- Hour Contracts

Cost Voucher X X N/A Line item specific proration.

If there is more than one ACRN within a deliverable line or deliverable subline item, the funds will be allocated in the same proportion as the amount of funding currently unliquidated for each ACRN on the deliverable line or deliverable subline item for which payment is requested.

52…