Tug Tow Tractors TTR-8 Buildout.docx

Statement of Work (SOW)-____________________________________________________________MATES 64 Tow Tactor/Tug/SATS

· Purpose Statement / Objective – One time purchase of Tactor/Tug/SATS for MATES 64 daily operations.

· Scope of Work – No additional work is required outside of the one-time purchase of Tactor/Tug/SATS. No services or ongoing work is needed by vendor. All services will be completed in house by owning maintenance shop (MATES #64).

· Period of Performance and Place of Performance (Services only). Vendor involvement will cease once delivery of equipment is completed to the USPFO warehouse, 1181 Kilmer St, Golden, CO 80401-3901.

· Schedule (Performance Objectives) –To the maximum extent practicable, ensure that acquisition officials --

· (i) Tier 4F Diesel Tow Tractor

· (A) Towing capability, diesel, limited slip rear axle, rear “E” hitch with 50 ton pintle hitch, 3,000 operating hours, All-Wheel Drive (AWD), hitch site tunnels, and power steering and braking

· (B) Ability to tow max 85,000 lbs

· (C) Complete cab assembly with air conditioning, heater system, defroster, wiper system, mirrors, dome light, cab mounted strobe

· (D) Must include a manufacturers warranty of at least 2 years or 2,000 miles

· Background (if Needed)

· Requesting a tow tractor with the ability to move military equipment and vehicles around the facility, to include into maintenance bays, on concrete, dirt, and in the snow. Current equipment cannot ensure a safe and efficient manner for movement of equipment for vehicles that are inoperable. At this time, the shop must utilize other organic assets that are functional to move equipment, which costs man-hours and increases overall safety risks.

· Special Requirements/Conditions (If Needed)-

· Length: not to exceed 140 in

· Width: not to exceed 72 in

· Drawbar Pull: NLT 8,000 lbf

· Max Tow Wet -1% Grade: NLT 80,000 lbs

· Rated Power: NLT 56 hp (42 kW) @ 2600 rpm

· Rated Torque: NLT 166 ft-lbft (225 Nm) @ 1500 rpm

· Aftertreatment Type: No DEF tank and no DPF/regeneration

· Contractor Manpower Report (Required for all services)

· No contractor manpower accounting will be required for purchase. All follow up maintenance will be conducted by receiving shop once delivery of equipment is completed and properly received onto the MATES #64 primary hand receipt.

· Acceptance – Equipment will be delivered direct to the Colorado Army National Guard warehouse facility at 1181 Kilmer St. Golden, CO 80401 and accepted by USPFO. Transportation of equipment to receiving shop (MATES #64), will be completed using MATES #64 equipment and personnel.

· Payment– Vendor will be paid direct via pre-determined methods outlined by the Colorado National Guard USPFO.

· Vendor/Contractor will submit final Invoice through Wide Area Workflow (WAWF)

· Vendor will be registered in WAWF to submit final invoice

· https://wawf.eb.mil/