TRD_Redacted.pdf

1. SOO/TRP for COTS Products Purchases To: AFTC/PZIOA, Eglin AFB, FL For: USAF/FY25 Countermeasures Sequential Timing and Amplitude Test (C-STAT)

2. Purpose The contractor shall upgrade and repair the Dragoon ITCN C-STAT Timing testers for the

350 SWG DET 1. These timing testers are used for testing the chaff and flare systems on the EC/HC/MC-130; C-130J, A-10, HH-60, F-16 and MC-12 configurations. The C-STAT shall also provide the capability to capture the firing pulse and locations of expendables dispensed from the aircraft. The upgrades to the C-STAT will reduce mission execution by over an hour each test. With over 300 tests per year, often conducted during mission critical times, these upgrades will save the Combat Air Force hundreds of hours of time during mission critical moments.

3. Technical Requirements The contractor shall provide updates to the collector and tester front plate to incorporate the new cannon plug style cables for improved interface between the collector and tester. The contractor shall provide MIL-STD 1553 cables outfitted with cannon plugs to be connected to the collector and up-to four testers per cable assembly.

3.1 Special Asset Tagging

The contractor shall provide special asset tags IAW MIL STD-130, DODI 8320.04, Item Unique Identification (IUID) Standards for Tangible Personal Property and DFARS 252.211-7703, Item Identification and Valuation. The current list of accepted unique item identifier types is maintained at http://www.acq.osd.mil/dpap/pdi/uid/uii types.html. All DoD recognized unique identification equivalents are listed at http://www.acq.osd.mil/dpap/pdi/uid/iuid equivalents.html.

3.2 IPV6 Mandate

The contractor shall ensure the product meets IPV6 capabilities per UCR 2013 and certified by the DoD UC approved products list.

3.3 FIPS 140-2 Encryption Mandate

The contractor shall ensure that all cryptographic products have FIPS 140-1 or 140-2 security certification through the FIPS 140-1 and 140-2 approved products list.

3.4 Common Criteria Evaluation & Validation Scheme

The contractor shall ensure that products used to protect information on National Security Systems are certified by the NIAP/CCEVS approved product list.

3.5 TEMPEST Program Mandates

The contractor shall provide TEMPEST products certified by the NSA TEMPEST approved products list.

4. Ordering Table Within ten business days of the contract being awarded, the government will provide to the vendor the CMDS Timing Testers and CMDS Collectors listed and quantified below for the vendor (Dragoon ITCN) to perform upgrades. This equipment will be upgraded by the vendor and returned to the government at the conclusion of the vendor’s work. The vendor will provide the 118 interface cables to the government as part of the contract.

Item Model Nomenclature Part Number Qty 1 CM2-C-16 CMDS Collector 06-08418 7 2 CM2-T-47 CMDS Timing Tester 06-08397 96 3 Pelican Collector Case CM-CASE-1 7

4 Pelican C-STAT Case CM-CASE-2 16

5 Panasonic Toughbook Laptop CF-31 1

6 N/A Interface Cables N/A 118

5. Technical Contractual Requirements

5.1 Technical Refresh

To ensure new design enhancements and technological updates or advances, the contractor shall offer, under this DO, hardware and software components available to the contractor's commercial customers. Furthermore, the contractor shall make available any commercially available updates to the hardware and software provided under this DO. If such updates are available to other customers without charge, then they shall also be made available to the Government without additional charge. The contractor will ship these updates to existing customers who have acquired the hardware/software being updated under this DO. Vendor commercial product offerings shall include “state of the art” technology, i.e., the most current proven level of development available in each product category.

5.2 Trade Agreement Act (TAA)

All proposed products must be compliant with the Trade Agreements Act of 1979 (TAA) and related clauses in Section I of this contract. In accordance with DFARS 252.225-7021, the Trade Agreements Certificate at DFARS 252.225-7020 shall be provided for each end item defined and specified in a solicitation that exceeds the TAA threshold subject to the waivers and exceptions provided in FAR 25.4, and DFARS 225.4 offered in response to any RFQ issued under this contract. Please note that Federal Acquisition Regulation (FAR) paragraph 25.103(e) includes an exemption from the Buy American Act (BAA) for acquisition of information technology that is commercial items.

5.3 Authorized Resellers

The contractor may be an authorized reseller of new and refurbished/remanufactured equipment for OEMs proposed under this DO. The contractor may also procure directly from the OEM or utilize other legitimate distribution channels to provide the required products in accordance with the OEM’s policies on reselling. Any contractor’s channel relationships with their OEM partners (gold, silver, etc.) will be represented in the best pricing offered. If the contractor is not an OEM reseller, the contractor shall clearly identify this on the submitted proposal and list the OEM resell partner’s registered relationship with the OEM. DOs may restrict the use of authorized resellers, specific OEMs, or identify required OEMs. The contractor