Trash_Pump_Specs~1.docx
DOCX document 18 KB Posted
- Solicitation number
- 22-422DNR-LNDMG-B-24670
- Issued by
- Illinois
About this file
This document contains the specifications for a trailer-mounted solids-handling trash pump required by the Illinois Department of Natural Resources (IDNR) for the Marshall State Fish & Wildlife Area. The complete pumping unit shall consist of a DOT-approved highway trailer with a Tier IV (Final) diesel engine drive coupled to a 3-inch solids handling pump with 6" x 6" ANSI connections. The pump must meet or exceed requirements for self-priming, output range, suction lift, discharge head, and ability to pass 3-inch solids. The diesel engine must meet Tier 4 (Final) emission standards and include an engine control panel with various gauges. The trailer must be DOT compliant and include features such as stabilizers, a lifting bail, and vibration dampeners. The procurement also includes suction and discharge hoses, as well as a metal intake strainer.
The document does not provide details on pricing terms, set-asides, incumbents, funding requirements, or sources. It also does not mention response dates, due dates, site visits, bidder's meetings, award dates, or contract term and renewal options.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| BidBuy - Standard Terms and Conditions v.20.1_7~3.pdf | ||
| Standard Certifications V.18.1~35.docx | DOCX document | |
| Forms B Section V.20.1z~1.docx | DOCX document |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Specifications for Trailer Mounted Solids-Handling Trash Pump Illinois Department of Natural Resources Marshall State Fish & Wildlife Area
These specifications are for one (1) complete portable pumping unit, including hoses and accessories, to be provided to the IDNR at Marshall SFWA. The complete pumping unit shall consist of a DOT approved highway trailer with fuel tank, a Tier IV (Final) diesel engine drive coupled to a three-inch (3”) solids handling pump with 6” x 6” ANSI connections. Because this pump will be operating near a residential area, a sound attenuating enclosure is required.
The approved unit shall meet or exceed the following specifications:
Pump
· Self-Priming (with or without vacuum assist)
· Output ranges from 1,200 – 1,500 Gallons per Minute (GPM)
· Suction Lift of 25 feet
· Discharge Head of 100 feet (min)
· 6” x 6” Connections (Inlet/Outlet) for camlock fittings
· Impellor shall be open or semi-open type (capable of passing 3” diameter solids)
· Replaceable wear plate
· Clean-out access
· Oil level sight gauge
· Pressure relief valve
Diesel Engine
· Engine horsepower sufficient for maximum output range
· Tier 4 (Final) Emission Standards
· 4-cylinder, air or liquid-cooled, turbo-charged, fuel injected
· Electric start w/ built-in battery charger
· Engine Control Panel shall be water-tight and include key switch, oil pressure gauge, fluid temp gauge, voltmeter, hour meter and tachometer
· Gauges must be able to be read in direct sunlight
· Residential grade muffler
Trailer
· Single or dual axle
· DOT compliant with tires, brakes, lights, fenders, rear swivel jack stabilizers/levelers (2 @ 2000 lb.), tongue mount jack (5000 lb. capacity), two-inch ball hitch, safety chains, battery compartment
· Direct connect fuel tank with 24-hr runtime capacity (min) with auxiliary (valved) supply and return connections for use with a separate fuel pod/nurse tank
· Fully integrated heavy-duty lifting bail
· Shall be fitted with pump/engine vibration dampeners, mounting brackets, etc.
Hoses & Accessories
· Non-collapsible EPDM Suction Hose: 4 @ 6” x 25 ft w/ C&E Camlock
· Heavy Duty PVC Lay-Flat Discharge Hose: 2 @ 6” x 50 ft w/ C&E Camlock
· Metal (Solids) Intake Strainer (to affix to EPDM Suction Hose)
File details come from the government source that posted it. Updated .