Trailer specs.pdf
PDF 912 KB Posted
- Attached to
- F-35 Training Prop Trailer
- Solicitation number
- F2D0AA6155A001
About this file
This is a technical parts list and assembly drawing for an F35 Trainer Trailer Assembly. The document specifies a single trailer unit (44'-6" length × 8'-6" width × 6'-9" height) required for Ramstein Air Base, Germany, with a quantity requirement of one unit. The drawing is proprietary to Kirila Fire Training Facilities, Inc., located in Fowler, Ohio.
The assembly comprises 31 line items including custom-fabricated components (trailer frame, removable hitch, headache rack, tandem-axle fenders, caster track stops, and tail ramp assemblies) along with commercial off-the-shelf parts. Commercial components include two Smittybilt winches (5K and 17.5K capacity), four Bulldog square tube trailer jacks (8,000 lbs capacity each), Truck-Lite and Maxxima lighting assemblies, a TPO 9K electric brake trailer axle assembly, and an E-Trailer top-wind jack. Hardware items sourced from McMaster-Carr include hex head screws, washers, lock washers, clevis pins, cotter pins, thrust bearings, and hex nuts in various sizes and grades. The document includes dimensional tolerances (fractional ±1/16", decimal .xx ±.030", .xxx ±.015"), assembly details with cross-sectional views, and critical operational notes requiring stabilizer jacks to be adjusted so the dovetail and ramps align and lay flat on the ground before loading or unloading operations.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Combined Synopsis-Solicitation-775th CES - F-35 Training prop Trailer.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
PARTS LIST
DESCRIPTIONPART NUMBERQTYITEM
TRAILER FRAME FABRICATION251110M-ST-20111
REMOVABLE HITCH ASSEMBLY251110M-ST-20212
HEADACHE RACK FABRICATION251110M-ST-20313
TANDEM-AXLE FENDER FABRICATION251110M-ST-20424
CASTER TRACK STOP FABRICATION251110M-ST-20535
SWIVEL TRAILER CASTER ASSEMBLY251110M-ST-206A26
RIGID TRAILER CASTER ASSEMBLY251110M-ST-206B27
TRAILER TAIL RAMP ASSEMBLY251110M-ST-20738
420# PROPANE DOT CYLINDER420LB DOT CYLINDER29
SQUARE TUBE TRAILER JACK - 8,000LBS CAPACITYBULLDOG: #190756410
3/4" ROUND MARKER LIGHT, RED, 12/24VDCMAXXIMA #M09300R-DV411
3/4" ROUND MARKER LIGHT, AMBER, 12/24VDCMAXXIMA #M09300Y-DV612
HEX HEAD SCREW, 3/8-16UNC x 1-1/2"LG, GRADE 5, ZINC-PLATED STEEL
MCMASTER-CARR #92865A628413
THRUST BEARING, 3/4" DIA. x 1-1/4"OD, BRONZEMCMASTER-CARR: #5906K518614
PLAIN WASHER, 3/8", ZINC-PLATED STEELMCMASTER-CARR: #90126A031415
PLAIN WASHER, 1/2", ZINC-PLATED STEELMCMASTER-CARR: #90126A033816
COTTER PIN, 1/8", STEELMCMASTER-CARR: #90520A108617
LOCK WASHER, 3/8", ZINC-PLATED STEELMCMASTER-CARR: #91102A760418
PARTS LIST
DESCRIPTIONPART NUMBERQTYITEM
LOCK WASHER, 1/2", ZINC-PLATED STEELMCMASTER-CARR: #91102A770819
CLEVIS PIN, 5/8" DIA. x 1" USABLE LENGTH, 18-8SSMCMASTER-CARR: #92390A491620
HEX HEAD SCREW, 1/2-13UNC x 1-3/4"LG, GRADE 5, ZINC-PLATED STEEL
MCMASTER-CARR: #92865A718821
HEX NUT, 3/8-16UNC, GRADE 5, ZINC-PLATED STEELMCMASTER-CARR: #95462A031422
HEX NUT, 1/2-13UNC, GRADE 5, ZINC-PLATED STEELMCMASTER-CARR: #95462A033823
CLEVIS PIN W/ WIRE RETAINER, 1/2" DIA. x 3-3/32"
USABLE LENGTH, ZINC PLATED STEEL
MCMASTER-CARR: #98416A562424
3/4" LOOP-GRIP CLEVIS PIN WITH LOCKING RING, 6"
USABLE LENGTH, STAINLESS STEEL
MCMASTER-CARR: #98497A370125
X20 WINCH W/ STEEL CABLE AND REMOTE, 5K CAP.SMITTYBILT: #97205126
X20 GEN2 WINCH W/ STEEL CABLE AND REMOTE,
17.5K CAP
SMITTYBILT: #97517127
9K ELECTRIC BRAKE TRAILER AXLE ASSEMBLYTPO: 09DHDSSKTTK9578865128
2-1/2" MARKER LIGHT - 10 SERIES, LOW PROFILE, LED,
RED, 8 DIODE, FEMALE PL-10, 12V, KIT
TRUCK-LITE: #10076R329
4" STOP/TURN/TAIL LIGHT - SUPER 44, LED, RED, 6
DIODE, STRAIGHT PL-3 FEMALE, 12V, KIT
TRUCK-LITE: #44092R230
SQUARE TOP-WIND JACK WITH FOOTPLATE, CAPACITY
8,000 LBS, 28-3/4" LIFT
E-TRAILER #TJD-8000131
A A
B B
TITLE:
PROJECT:
DWG NO.
REV.
SHT. 1 OF 3
F35 TRAINER TRAILER ASSEMBLY
DRAWN:
251110M-ST-200
MLD
DATE:
8/4/2025
REF:
RAMSTEIN AB, GERMANY
NTS
ENG:
RPM
251110M-F35 & TRAILER-1225
SCALE:
Kirila Fire Training Facilities, Inc.
3007 SR7
Fowler, OH 44418 www.kirilafire.com
THIS DRAWING AND/OR TECHNICAL INFORMATION IS
THE PROPERTY OF KIRILA FIRE TRAINING FACILITIES, INC.
AND IS ISSUED FOR ENGINEERING OF MANUFACTURING
PURPOSES ONLY. IT CANNOT BE REPRODUCED OR USED
WITHOUT WRITTEN PERMISSION FROM KIRILA FIRE
TRAINING FACILITIES, INC.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
STANDARD DIMENSION TOLERANCES
UNLESS OTHERWISE SPECIFIED
Frac. +/- 1/16
.xx = +/- .030
.xxx = +/- .015
8'-6"
44'-6"
6'-9"
10/22/25
INITIAL RELEASE
REVISION HISTORY
REV DATE DESCRIPTION
QUANTITY REQUIRED - 1
2'-4"
A A
B B
TITLE:
PROJECT:
DWG NO.
REV.
SHT. 2 OF 3
F35 TRAINER TRAILER ASSEMBLY
DRAWN:
251110M-ST-200
MLD
DATE:
8/4/2025
REF:
RAMSTEIN AB, GERMANY
NTS
ENG:
RPM
251110M-F35 & TRAILER-1225
SCALE:
Kirila Fire Training Facilities, Inc.
3007 SR7
Fowler, OH 44418 www.kirilafire.com
THIS DRAWING AND/OR TECHNICAL INFORMATION IS
THE PROPERTY OF KIRILA FIRE TRAINING FACILITIES, INC.
AND IS ISSUED FOR ENGINEERING OF MANUFACTURING
PURPOSES ONLY. IT CANNOT BE REPRODUCED OR USED
WITHOUT WRITTEN PERMISSION FROM KIRILA FIRE
TRAINING FACILITIES, INC.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
STANDARD DIMENSION TOLERANCES
UNLESS OTHERWISE SPECIFIED
Frac. +/- 1/16
.xx = +/- .030
.xxx = +/- .015
SECTION A-A
DETAIL D
DETAIL C
DETAIL B
SECTION F-F
DETAIL G
SECTION E-E
A
A
D
C
B
F
F
G
E
E
A A
B B
TITLE:
PROJECT:
DWG NO.
REV.
SHT. 3 OF 3
F35 TRAINER TRAILER ASSEMBLY
DRAWN:
251110M-ST-200
MLD
DATE:
8/4/2025
REF:
RAMSTEIN AB, GERMANY
NTS
ENG:
RPM
251110M-F35 & TRAILER-1225
SCALE:
Kirila Fire Training Facilities, Inc.
3007 SR7
Fowler, OH 44418 www.kirilafire.com
THIS DRAWING AND/OR TECHNICAL INFORMATION IS
THE PROPERTY OF KIRILA FIRE TRAINING FACILITIES, INC.
AND IS ISSUED FOR ENGINEERING OF MANUFACTURING
PURPOSES ONLY. IT CANNOT BE REPRODUCED OR USED
WITHOUT WRITTEN PERMISSION FROM KIRILA FIRE
TRAINING FACILITIES, INC.
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES.
STANDARD DIMENSION TOLERANCES
UNLESS OTHERWISE SPECIFIED
Frac. +/- 1/16
.xx = +/- .030
.xxx = +/- .015
POSITION WINCHES AND DRILL
HOLES FOR FASTENING THEM
TO THE ANGLES UNDERNEATH
PLACES ITEM#5 FLUSH AND CENTER AGAINST
THE CHANNEL TRACKS AND WELD TO THE
ANGLES IN THE TRAILER FRAME FLOOR.
23 23
CRITICAL NOTE:
ALL STABILIZER JACKS MUST BE ADJUSTED
UNTIL THE REAR OF THE DOVETAIL AND THE
RAMPS ALINE AND ARE LAYING FLAT ON THE
GROUND BEFORE LOADING OR UNLOADING
PULLEY SYSTEM AT THE REAR
END OF THE BED WILL NEED
TO BE POSITIONED & WELDED
AT ASSEMBLY TO BE USED
WITH ITEM#26
File details come from the government source that posted it. Updated .