Trailer_Specifications.pdf
PDF 1 MB Posted
- Solicitation number
- 140P1424Q0044
About this file
This document contains the specifications for a 26-foot aluminum stock trailer required by Yellowstone National Park. The key requirements include:
- Trailer dimensions: 26 feet long, 83 inches wide, and 6 feet 8 inches high (interior dimensions)
- 20,000 GVWR capacity, with a fully boxed steel frame, aluminum sub-frame, and riveted construction to allow for flexibility
- Specific features such as a skid plate, spring-loaded rear door, torsion axle suspension, and LED lighting to meet DOT requirements
- The trailer shall be new, from a manufacturer such as Wilson Trailer Ranch Hand or equal
- Pricing should include shipping to Yellowstone National Park in Mammoth, WY
- The solicitation is for the purchase of one new trailer, with a 1995 Titan 18-ft steel livestock trailer offered as a trade-in
The related federal contract opportunity is Solicitation Number 140P1424Q0044 for a "26 ft Livestock Trailer for Yellowstone National Park", issued by the Department of the Interior National Park Service Intermountain Region.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Sol_140P1424Q0044_Amd_0002.pdf | ||
| Sol_140P1424Q0044_Amd_0001.pdf | ||
| Sol_140P1424Q0044.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
26 Foot aluminum stock trailer with Trade In
YELLOWSTONE NATIONAL PARK WYOMING
GENERAL INFORMATION:
Yellowstone National Park has a requirement to purchase a 26 FT aluminum stock trailer 20,000 GVWR (Wilson model Ranch Hand or equal). All specifications are minimum requirements.
• Width. 83 inches inside dimension (not to exceed)
• Height: 6 foot 8 inches inside dimensions (+- 2 inches)
• Length 26 foot inside dimensions (not to exceed)
Manufacturer: Wilson Trailer Ranch Hand 26-foot aluminum or equal
OBJECTIVE:
This requirement is to purchase one (1) new 26-foot aluminum stock trailer.
Stock Trailer Minimum Requirement:
26 FOOT TRAILER MINIMUM SPECIFICATIONS:
• The trailer shall be equipped with full-length steel floor supports (9-inch cross bar spacing).
• The trailer shall be equipped with a fully boxed steel frame , plating, and fastening in the transition areas and the trailer nose.
• The floor of the trailer shall be fastened and not welded to the floor crossbars. This shall allow the floor to flex without compromised the floors structural strength from broken welds.
• The trailer shall be equipped with embossments into the smooth areas of the stock trailers punched side panels. The embossments increase the panel’s strength and ability to resist denting.
• The trailer shall be equipped with an all-aluminum sub frame.
• The trailer shall be constructed using rivets not welded. The rivets allow for flexing/expansion.
• The trailer shall be equipped with a full-width skid plate across the rear of the sub frame to prevent rear tear out when unloading on uneven surfaces.
• The rear door assembly shall be spring-loaded slam /catch.
Trailer capacity: 20,000 GVWR.
Nose style: Tapered Front nose / (natural) Nose floor: Flat Aluminum.
Nose gate Style: Fold down unpunched.
Hitch: 2-5/16-inch adjustable goose neck with safety chains Trailer width: 83-inch interior, 7 feet 3 inch overall outside Tie rail inside: 3/4 BAR (per- foot) located 70 in above deck. On right side of trailer Tie rail outside: 3/4 BAR (per – foot) located 54 in above deck.
Side pattern: Style punched pattern Axles: 2each - 8,000 pound 102 in wide (0 degree up) Torsion axel Suspension: Torsion axel style Hubs: E-Z Lube hubs Tires: 235/75R17.5 R-184 16 ply Rims/wheels: 6.75 x17.5 8 lug solid center gray (no exception) Brakes: 4-wheel electric with emergency brake away kit and battery Decking: 110 Flat T.P. W/ 9 in X-bar spacing (per foot) tread- plate Decking /cover 5/8 thick rubber livestock flooring/mats (removable) full length Roof: Stretched Aluminum STD adhesive attached Landing Gear: 12,000-pound drop leg spring loaded.
Crowd Gate Full Swing location center inside Gate Hardware: Outside release.
Rear door style: Outside slide left hand (full swing) with slam latch.
Side entry door: Center front 33 in opening driver side.
Front access door: 16x34 front sealed center sealed in nose.
Lighting: Grote micro nova. Meet DOT requirements (LED) Rear lighting 6 each total lights on rear, including high mounted LED lighting.
Red and white conspicuity tape Full length including front and rear (DOT) Turn signals Rear and center of trailer turn signals (LED) (DOT) Electrical Plug: 7 Way RV stud.
Interior lighting 2 each LED lights evenly spaced on roof cross beam.
Mud flaps Rubber mud flaps behind rear wheel Rub rail Extruded aluminum with running boards full length of trailer.
Spare tire carrier Curb side front drop with rim and tire Electrical Wiring: Fully enclosed overhead protected from water and debris.
Finish: Steel treated with black corrosion resistant coating.
Aluminum Aluminum left natural.
Inner Fenders Tapered inner fenders.
Outside fenders Aluminum ridged fenders (can be used as steps) Hinges All latching devices/ hinges shall be riveted not welded.
Offeror shall provide a quote with verification that the trailer meets the minimum requirements.
Price shall include shipping charges to Yellowstone National Park Mammoth WY 82190
TRADE IN SPECIFICATIONS
1995 Titan Gooseneck 18 FT
GVW 14,000 7000 LB AXELS
SERIAL # 4TGG1820XS1001807
Trade in with pickup
File details come from the government source that posted it. Updated .