Tractor Specs_9.docx

The Office of Water Resources seeks the procurement of a new Agricultural Class Tractor suitable for mowing on slopes near bodies of water.

Vendor should provide product literature with the quote. Shipping costs to be included with bid. Product must be new, unused and free from defects. Shipping F.O.B. to destination 15536 North State Route 78, Havana, IL 62644. The use of a brand name is for describing the standard of quality, performance, and characteristics desired and is not intended to limit or restrict competition. Or Equal submissions will not be rejected because of minor differences in design, construction or features that do not affect the suitability of the product for its intended use. Burden of proof that the product is equal is on the bidder.

General Specifications:

The tractor must be suitable for mowing on embankments and slopes and will require certain safety features for working around water. The tractor shall meet the following specifications.

All Attachments must be compatible with the compact utility tractor quoted by the vendor.

Engine

· 74 hp minimum (75 hp class tractor)

· Diesel

· EPA Final Tier 4 emission standards.

Hydraulics

· Min. PTO Hp 65

· Min. 22.4 gpm flow rate (min. 12.9 gpm for implements and min. 9.5 gpm for steering)

· Min. of 2 sets of rear hydraulic ports

· Min. of 1 set of hydraulic ports on the loader for attaching other implements.

Transmission

· Electronic Shift on the Fly

Tires

· Min. 76” center to center rear tire spacing. (Maximum overall width with tires 102”)

· 420/85 R30 rear tires

Misc.

· Rear mounted three point hitch system min. lifting capacity of 3,600 lbs.

· Front Wheel Braking Assist.

· Closed Cab w/Heat and A/C

Safety Features

· Minimum 2 doors for a minimum 2 points of egress

· High Visibility Panel (Clear Panel to have clear vision of loads at Max. Height)

· Rear View Mirrors

· Rear windshield wiper

· Undercarraige Exhaust

· Front Weight carrier w/min. 600 lbs. of ballast weight

Attachments

· Quick attach Front end loader with a minimum 60” bucket, minimum 3,400 lbs. lifting capacity at pivot points. Front End loader must be compatible with skid steer accessories.

· Swing Hitch Style pull behind brush hog. 96” to 102” in width, Cutting Height of at least 13”. Cutting Diameter min. 3”. Minimum required 55 hp.

· 48” front mounted pallet forks

Vendor Requirements

· Vendor must be an authorized dealer and service provider for the tractor and accessories.

· Vendor must be located within a 100 mile radius of Havana, IL.