Towable Lift Specifications and Pricing Page.xlsx

XLSX spreadsheet 204 KB Posted

Attached to
D07 - (1) Tow Behind Bucket Lift
Solicitation number
SRC0000033839
Issued by
Shelby County, Ohio

About this file

This document is a specification and pricing sheet for towable lift equipment issued by the Ohio Department of Transportation (ODOT), specifically targeting District 7. The document outlines detailed technical specifications for a Tow Behind Bucket Lift with a minimum working height of 60 feet, requiring one unit to be delivered to multiple ODOT garage locations including Sidney, Wapakoneta, and Bellefontaine. The specifications include precise requirements for platform height, capacity, safety features, electrical components, and trailer wiring standards, with options for additional equipment such as a platform rotator, drive and set capabilities, and a spare tire mounting kit.

The pricing section indicates that while specific unit pricing is not completed in the document, the specification sheet is structured to enable precise cost comparison and selection. The document mandates compliance with Federal Motor Carrier Safety Regulations and includes specific ODOT trailer lighting and wiring specifications, requiring LED lights, specific wiring configurations, and weatherproof junction block connections. Contact information is provided for key ODOT District 7 personnel who will be involved in the procurement process, including Duane Byers, Scott Hurley, Tim Little, and Scott Platfoot, representing various county garage locations within the district.

View the file

Other files

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

New Units

DistrictUnit DescriptionBase Price per UnitNo. UnitsTotal Base Price
7Tow Behind Bucket Lift (specify make/model)$ - 01$ - 0
QtyOptions not included in Base PriceOption CostTotal Options Cost
1Platform Rotator$ - 0$ - 0
1Drive and Set (2WD Assist/Traction Drive)$ - 0$ - 0
1Spare Tire Mounting Kit$ - 0$ - 0
$ - 0$ - 0
Total New Units Cost w/ Options$ - 0

Tow Behind Bucket Lift Specs

Tow Behind Bucket Lift
MINIMUM SPECIFICATIONS
ITEM NO.A. GeneralComplyDon’t Comply
1A.Minimum Working Height: 60 ft.
2A.Platform Height: 55'
3A.Minimum 4' Bucket Platform
4A.Standard treadplate platform
5A.110V GFI protected outlet to platform
6A.Four Hydraulic Outriggers/Stabilizers
7A.Provide two (2) rubber wheel chocks and holders.
8A.Full pressure individual lower controls, with upper control override or approved equal.
9A.Bucket to have a rated minimum capacity of 158 kg (350 lbs.) in any position.
10A.Automatic Leveling System
11A.Self-Leveling Platform
12A.Dual belt harness attachment on boom or approved equal.
13A.Hydraulic Brakes
14A.Unit to meet all applicable safety regulations
15A.Four (4) light Amber LED strobe system.
16A.Trailer Plug: Trailer must be attached with trailer plug and wiring according to Attachment A (Below)
17ASpare Tire and Mounting Kit
18APlatform Rotator
19ADrive and Set (2WD Assist/Traction Drive)
B. WARRANTY
1B.Standard manufacturer’s warranty will be included.
2B.The successful vendor will send a complete set of manuals for any additional items/equipment added to a piece of equipment. Parts and Service manuals must be provided via PDF.
ATTACHMENT A – Ohio DOT Trailer Lighting & Wiring Standard and Specifications
ODOT will only purchase trailers that meet the following lighting and wiring specifications (Reference Drawing):
· Trailer shall meet or exceed all current Federal Motor Carrier Safety Regulations 393.9 thru 393.33.
· Trailer cord plug shall meet SAE spec. J560 and be wired directly to trailer cord with no adaptors.
· Plug to be wired as follows (no other plug wiring will be accepted):
o White – Ground return to towing vehicle
o Black – Electric break controller – or not utilized if trailer has air, hydraulic or no brakes
o Yellow – Left turn signal and on some light duty tow vehicles, stop/hazard lamps
o Red – Stop lamps and antilock device
o Green – Right turn signal and on some light duty tow vehicles, stop/hazard lamps
o Brown – Clearance, marker, license plate and tail lights
o Blue – If air Brake – Continuous ABS power – If electric Brake – Ing. Controlled B+ for break-away battery charge maintenance circuit
· No adapters will be accepted.
· Trailer cord to be wired to a weatherproof, 7-terminal junction block (Waytek part #47290 or approved equal).
· All trailer light wiring (including ground wiring) must be routed to junction block.
· Wire splices will be done with heat shrink butt connectors or soldered with heat-shrink.
· No wire nuts, closed end connectors or self-stripping displacement connectors (i.e. Scotch Loks).
·
All lights to be LED. There shall be individual brake (2 ea.) and turn signal lights (2 ea.) for a total of 4 lights. These lights shall be 4” Round lights in rubber grommets or 3”x7” oval lights in rubber grommets. Clearance and Marker lights shall be 2” round lights in rubber grommets or ODOT approved equal.

Total Pricing

DistrictNo. New UnitsTotal New Unit Cost w/ OptionsDistrict PO Total
71$ - 0$ - 0

District Locations

ODOT LocationAddressContactPhone #E-Mail Adress
District 7 Garage (Deliver Too)1001 St. Marys AvenueDuane Byers937-4976840DUANE.BYERS@DOT.OHIO.GOV
Sidney, Ohio 45365
Augalaize County Garage511 Commerce DriveScott Hurley937-497-6733Scott.Hurley@dot.ohio.gov
Wapakoneta, OH 45895
Logan County Garage149 Northview DriveTim Little937-497-6788TIM.LITTLE@DOT.OHIO.GOV
Bellefontaine, Ohio 43311
Special Project D71001 St. Marys AvenueScott Platfoot937-497-6899Scott.Platfoot@DOT.OHIO.GOV
Sidney, Ohio 45365

mailto:DUANE.BYERS@DOT.OHIO.GOVmailto:Scott.Hurley@dot.ohio.govmailto:Scott.Platfoot@DOT.OHIO.GOV image1.png

File details come from the government source that posted it. Updated .