Torque Wrench Specifications[1].doc
DOC document 27 KB Posted
- Attached to
- 1 Year Contract for Torque Wrenches
- Solicitation number
- RFQ - 17D - 09100200000000000327
- Issued by
- Maine
About this file
This file contains torque wrench specifications for a one-year contract with the State of Maine. The contract specifies requirements for torque wrenches constructed of all steel with split beam design capable of measuring torque applications in either direction within a range of 200-600 foot-pounds. The wrenches shall feature a 3/8-inch square drive, approximately 48 inches overall length, nickel/chrome finish, and measurement scales in 10 foot-pound increments. The tools must comply with ANSI B107.14M and GGG-W-686C standards and meet specifications for either single or multi-piece configurations.
The manufacturer must provide a minimum one-year warranty covering workmanship and materials. Ordering procedures require Delivery Orders to be created in AdvantageME for all orders against Master Agreements unless payment is made via Maine Procurement Card. Orders of $5,000 or less will be emailed as PDF files directly to the vendor by the using agency, while orders exceeding $5,000 require Division of Purchases Buyers approval and encumbrance prior to vendor notification. The State Purchasing Director reserves the right to extend the contract period beyond the indicated expiration date with contractor consent, and the Director of the Division of Purchases may cancel the contract with thirty days' written notice.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| PO_Terms.doc | DOC document |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Torque Wrench Specifications
Compliance:
Shall meet or exceed all specifications under ANSI B107.14M ,GGG-W-686C.
Torque Wrench Construction
Shall be of all steel construction and of split beam design capable of measuring torque on either left or right hand application, within the range of 200-600 ft. lbs.
Operating mechanism relies on measuring the deflection of a set of split beams. Beams shall remain slack until the tool is torqued, allowing the tool to be stored at any value without degradation of the accuracy.
Physical Configuration
Shall be a ¾” square drive
Overall length 48” (approx)
Finish: Nickel / chrome
Single or multi piece wrench
Scale shall be in 10 ft. lb. increments
Warranty:
The manufacturer shall provide a warrantee on product to cover workmanship and materials for one year minimum.
ORDERING PROCEDURE: Delivery Orders (DO) will be created in AdvantageME for all orders against Master Agreements (MA), unless the State of Maine Procurement Card is used for payment. Orders in the amount of $5000.00 or less will be e-mailed by the using agency to the Vendor as a .pdf file. Delivery Orders in amounts greater than $5000.00 will workflow to the Division of Purchases Buyers for approval and encumbrance. The Division of Purchases will e-mail the .pdf order to the Vendor.
EXTENSION CLAUSE:
The State Purchasing Director reserves the right to extend this contract period beyond the indicated expiration date with the consent of the contractor.
CANCELLATION CLAUSE:
The Director of the Division of Purchases reserves the right to cancel this contract with a thirty (30) day written notice, or to conform to the terms and conditions of this contract.
File details come from the government source that posted it. Updated .