TO 11W1-7-16-2 Ammunition Handling Set_master list of special tools.pdf
PDF 38 KB Posted
- Attached to
- F-16 Weapon Parts Cleaner
- Solicitation number
- W50S78-PartsCleanerFY24
- Issued by
-
Department of the Army National Guard
About this file
This document is a Master List of Special Tools and Test Equipment required for the maintenance of the Ammunition Handling Set (AHS).
The Master List of Special Tools includes items such as an oven for curing solid film on aluminum parts, a fine hone for burnishing minor nicks and scratches, a jet washing machine and ultrasonic parts washer for cleaning metal parts, and a transfer unit rim guide gauge. The Master List of Test Equipment includes a multimeter for continuity checks, dummy rounds for checking units for binding and correct timing, and fixtures for checking the entrance/exit unit and conveyor elements. These specialized tools and test equipment are necessary for the proper maintenance and operation of the AHS at the depot level.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Parts washer_Sonic Cleaner objectives.docx | DOCX document | |
| TO 11W1-12-4-32 Gun_Cleaning.pdf | ||
| TO 11W1-12-4-32_master list of special tools.pdf | ||
| TO 11W1-7-16-2 Ammunition Handling Set_cleaning.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
1 MASTER LIST OF SPECIAL TOOLS.
Improper use of tools and equipment may cause injury to personnel and damage to equipment. Failure to comply could result in injury to, or death of, personnel or long term health hazards.
Table 1 lists special tools. Although common hand tools are not listed herein, a substitute item may be used in place of any required common tool if the use does not degrade the condition and reliability of the material or safety of operation.
Table 1. Master List of Special Tools
Part No./Specification No./NSN
CAGE
Code
Figure/ Index No. Nomenclature Use
As Required (AR) N/A N/A Oven Cure solid film on aluminum parts (Depot)
Commercial N/A N/A Fine Hone Burnish minor nicks, burrs, and scratches
Commercial N/A N/A Jet Washing Machine Clean Metal Parts
Commercial N/A N/A Ultrasonic Parts Washer Clean metal parts
Local Manufacture 98752 Figure 1 Transfer Unit Rim Guide GO/NO-GO Gauge
Checking Transfer Unit Rim Guide clearance
LS-130117-XX46 or equivalent
0P667 N/A Hand Pump Fill Lubricator
798E588 05606 N/A Ammunition Drum Mainte-nance Fixture
Drum Maintenance, Depot
2 MASTER LIST OF TEST EQUIPMENT.
Table 2 lists test equipment required for maintenance of the Ammunition Handling Set (AHS).
Table 2. Master List of Test Equipment
Part No./Specification No./NSN
CAGE
Code
Figure/ Index No. Nomenclature Use
AN/PSM-37 or equivalent 80058 N/A Multimeter Continuity Check Switch Assembly
M51A1B1 99999 N/A Dummy Rounds, 20 mm Check units for binding and correct timing of sprockets and gears. Continuity check switch assembly
101D4320 05606 WP 007 00,
Figure 5
Fixture, Exit/Entrance Unit Checking
Gages Entrance and Exit Unit
117D2305 05606 WP 007 00,
Figure 1
Fixture, Conveyor Element Checking
Checks Elements
132D1644-2 05606 WP 007 00,
Figure 2, Figure 3
Minimum Round Gage Gage upper and lower rim guide
TO 11W1-7-16-2
WP 003 00
CUI
CUI
TaTT ble 1. Master List of Special ToolsTT
Commercial N/A N/A Jet Washing MachineWW Clean Metal Parts
Commercial N/A N/A Ultrasonic Parts WasherWW Clean metal parts
File details come from the government source that posted it. Updated .