TO 11W1-12-4-32_master list of special tools.pdf
PDF 144 KB Posted
- Attached to
- F-16 Weapon Parts Cleaner
- Solicitation number
- W50S78-PartsCleaner
- Issued by
-
Department of the Army National Guard
About this file
This document is a Master List of Special Tools required for the maintenance of the M61 and M61A1 20mm automatic guns. It provides a detailed list of the specialized tools, their part numbers, CAGE codes, nomenclature, and intended uses. The tools include those for installation, removal, measurement, and cleaning of various gun components such as the bolt, muzzle clamp, firing pin, and barrel. Additionally, the document includes a list of the required test equipment for maintaining these guns. This information is likely used to support a federal contract opportunity for the F-16 Weapon Parts Cleaner, which requires the cleaning of internal parts for the MAU-12 bomb rack, Triple Ejector Rack (TER) bomb rack, and the 20mm gun. The contracting agency is the Department of the Army National Guard.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Table 1. Master List of Special Tools - Continued
Part No./Specification No./NSN
CAGE
Code
Figure/ Index No. Nomenclature Use
- Local manufacture
Figure 5 Holdback tool, clearing cam Used to maintain clearing sector in the cleared position.
- Local manufacture
Figure 6 Bolt head lock installation tool (Old)
Used to install bolt head locks.
- Local manufacture
Figure 9 Removal tool, muzzle clamp Used to remove muzzle clamp from barrels.
- Local manufacture
Figure 10 Gauge, GO-NO-GO, firing pin
Used for checking firing pin protrusion.
- Local manufacture
Figure 13 Gauge, GO-NO-GO, rotor stop
Used to check clearance of rotor stops.
- Local purchase
- Jet wash machine Used to clean gun parts.
- Local manufacture
Figure 15 Muzzle clamp removal kit Used to remove muzzle clamp from barrels.
105D3625 05606 - Bolt head lock installation tool (New)
Used to install bolt head locks.
11075759 19201 Figure 14 20 millimeter (mm) Dummy Cartridge M51 series Precision Guided Unit (PGU) (typical) (except chrome plated cases)
Used to check mechanical operation of the gun.
167C2209 05605 Figure 14 Barrel erosion gauge with case
Used to measure diametrical wear of barrels.
189F485 05606 Figure 11 Guide bar housing finger gauge.
Used to measure wear on guide bar.
3 Jaw Gear Puller (8 inch or larger)
Local purchase
- 3 jaw gear puller (Use with muzzle clamp removal kit.)
Removal of muzzle clamp.
7225087 19205 Figure 1, 6 Brush, 20 mm bore Used to cleaning bore and chamber of barrels.
7273689 19204 Figure 14 Flush pin gauge (headspace gauge)
Used to check clearance between flange and rim.
7274771 (Type designator) Local manufacture
Figure 2, 3 and 4
Breech bolt assembly and disassembly fixture with punches
Used for breech bolt assembly and disassembly.
7329891-10 98752 Figure 1, 12 Holdback tool, Clearing sector
Used for holding back the clearing sector.
7738552 (Type designator) Local manufacture
Figure 7 Nose, headspace gauge Used to measure clearance between rim and flange.
8766012 19206 Figure 1, 7 Middle section assembly of the push rod
Used when cleaning bore and chamber of barrels.
8766014 19205 Figure 1, 8 Cleaning staff Used to cleaning bore and chamber of barrels.
2 MASTER LIST OF TEST EQUIPMENT.
Table 2 lists the test equipment required for maintenance of the M61 and M61A1 20 mm automatic guns.
CUI
TO 11W1-12-4-32
WP 003 00
CUI
1247708495N Highlight
1247708495N Highlight
File details come from the government source that posted it. Updated .