Testing Appendix B 9mm PCC.docx
DOCX document 34 KB Posted
- Attached to
- 9mm Pistol Caliber Carbine Rifle
- Solicitation number
- 70US0925R70092838
About this file
This document is an evaluation checklist for a 9mm Pistol Caliber Carbine (PCC) rifle solicitation by the US Secret Service (Solicitation Number: 70US0925R70092838). The checklist outlines detailed technical evaluation criteria across five key assessment areas: technical volume review, conformity with Statement of Work, trigger pull test, velocity test, and accuracy test.
The evaluation matrix specifies strict technical requirements for the weapon, including maximum weight (7.0 lbs), barrel length (6.0-8.0 inches), overall length constraints (28 inches extended, 23 inches collapsed), handguard specifications (7.00 inches), and suppressor limitations. Performance criteria include trigger pull range of 3.0-5.0 lbs, velocity measurements, and accuracy standards not exceeding 1 MOA (Minute of Angle). The solicitation requires submission of 10 magazines and mandates compliance with National Firearms Act regulations, with evaluators scoring samples across multiple performance parameters.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| 9mm PCC Amendment QAs and Revised Documents.pdf | ||
| Testing Appendix B 9mm PCC.docx | DOCX document | |
| SOR - 9mm PCC.docx | DOCX document | |
| USSS Clauses for 9mm Pistol Caliber Carbine.docx | DOCX document | |
| Testing Appendix D 9mm PCC end user.docx | DOCX document | |
| SOR - 9mm PCC.docx | DOCX document | |
| Solicitation - 70US0925R70092838.pdf | ||
| Testing Appendix A Phase 1 9mm PCC eval.docx | DOCX document | |
| Instruction to Offerors for 9mm Pistol Caliber Carbine.docx | DOCX document | |
| Testing Procedures 9mm PCC.docx | DOCX document | |
| Testing Appendix C Armorer Eval 9mm PCC-PDW.docx | DOCX document |
Show all 11
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Phase I Evaluation Checklist Appendix B
9mm PDW
| Offeror: |
| SN# |
Weapon Make
Weapon Model
1. Technical Volume Review Checklist Evaluator: Date:
| Provided? |
| Within Page |
Limits (If Applicable)?
Meets Critiria?
Manufacturer’s Information (1 page Limitation)
Manufacturer’s Maintenance Schedule (5 page Limitation)
Proof of compliance with National Firearms Act 26 U.S.C., Chapter 53 §§ 5801-5872 (1 page limitation)
Warranty Information (no page limitation)
Offer’s Quality Control/Quality Assurance plan (no page limitation)
Accessories/a la cart Parts List (no page limitation)
2. Conformity with the Statement of Work - Evaluator: Date:
Samples
| Requirement |
| #1 |
| #2 |
| #3 |
| #4 |
| #5 |
| Weight |
| No heavier than 7.0 lbs . (w/o accessories) |
| Barrel Length |
| 6.0-8.0 inches |
| Height |
| 8.0 inches or less |
| length |
| NTE 28 inches extended. NTE 23 inches collapsed |
| Requirement |
| #1 |
| #2 |
| #3 |
| #4 |
| #5 |
| Handguard length |
| 7.00 inches |
| Suppressor |
| NTE 5.00” additional OAL |
| Magazines |
| 10 supplied |
3. Trigger Pull Test - Evaluator:
Evaluator: Date:
| Min3.0 lbs.- max5.0 lbs. |
| All Samples |
Round Date
| #1 |
| #2 |
| #3 |
| #4 |
| #5 |
4. Velocity Test (Sample Set A) Evaluator: Date:
| Round | Date |
| #1 – FPS | |
| #2 – FPS | |
| #3 – FPS |
AVERAGE
5. Accuracy Test (Sample Set A) Evaluator: Date:
| Not to exceed 1 MOA |
| Sample Set A Rifles |
| Round Date |
| #1 – MOA |
| #2 – MOA |
| #3 – MOA |
1 – Set of 5 Shot Groups
2 – Set of 5 Shot Groups
3 – Set of 5 Shot Groups
AVERAGE
Evaluator: Date:
Additional Notes:
File details come from the government source that posted it. Updated .