TECHNICAL PROPOSAL EVALUATION-CRITICAL FACTOR LIST.pdf

TECHNICAL PROPOSAL EVALUATION-CRITICAL FACTOR LIST

2 September 2016

Project: _ ACCO Monorail Hoist

SPECIFIC REQUIREMENT

ACCEPTABLE NON-

ACCEPTABLE

REMARKS

• One (1) Each 2-Ton Rated ACCO Wright Speedway Wire Rope Hoist, Model X1W02D025-15M2D1, to include:

o Monorail Hoist, Close Headroom, Cross Mounted o Operating flange 3.33 inch louden patented track o 25 feet lift height o 15 FPM hoist lift speed VFD o 22 3/8 inch headroom includes

2” for geared limit switch (from rail trade line to saddle of hook at high) o 2 part double reeving o Trolley Speed – 50 FPM max

VFD

o Enclosure – NEMA 3R o Hoist Motor – 2 HP, 1800

RPM Inverter Duty o Trolley Motor – 1 ea ½ HP, 1800 RPM Inverter Duty o Voltage 460V 3Phase 60Hz o Motor Thermostats o Motor Brake o Geared Limit witch o Hoist H4 Duty class o Mechanical Load Brake o Overload Cut-off device o Thermal Overload protection o Safety Yellow Enamel painted hoist/trolley o Hoist/Trolley Max. weight 900 lbs o HBC-Radiomatic Micron 7 radio remote control with:

2-motion Start button Hoist UP – Hoist

Down

Trolley North – Trolley South

Red E-Stop button Operator controlled warning horn Operating and battery status display Spare transmitter Radio control with rechargeable batteries and chargers

Visual warning light activated with crane movement (flashing strobe light).

• Two (2ea) Louden Supertrack

Girder, ACCO part number 604.1231 with the following specifications:

o 47ft-0 inch long o depth 12” o 31 lb/feet o bottom flange width 3.33” o Splice preparation, gray primer paint o No hole on top flange

• Two (2ea) End Stop Assembly, angle type, ACCO Part Number 607.5030, to include:

o Mounting hardware

• One (1ea) Web Splice plate assembly, ACCO Part Number

607.5011 to include:

o Mounting hardware o Gray primer paint